Permeability Logging:A Breakthrough from 0 to1

On March 3,2024,the prototype permeability logging instrument independently developed in China successfully completed its first downhole test in Ren 91 standard well in PetroChina Huabei Oilfield.In the open hole section at a depth of 3925 metres and at a temperature of 148℃,the device collected high-quality permeability logging data.This marks a key technological breakthrough from 0 to 1 in permeability logging,and lays the foundation for the next step in developing a complete set of permeability logging equipment.

Identification of reservoir types in deep carbonates based on mixedkernel machine learning using geophysical logging data

Identification of reservoir types in deep carbonates has always been a great challenge due to complex logging responses caused by the heterogeneous scale and distribution of storage spaces.Traditional cross-plot analysis and empirical formula methods for identifying reservoir types using geophysical logging data have high uncertainty and low efficiency,which cannot accurately reflect the nonlinear relationship between reservoir types and logging data.Recently,the kernel Fisher discriminant analysis(KFD),a kernel-based machine learning technique,attracts attention in many fields because of its strong nonlinear processing ability.However,the overall performance of KFD model may be limited as a single kernel function cannot simultaneously extrapolate and interpolate well,especially for highly complex data cases.To address this issue,in this study,a mixed kernel Fisher discriminant analysis(MKFD)model was established and applied to identify reservoir types of the deep Sinian carbonates in central Sichuan Basin,China.The MKFD model was trained and tested with 453 datasets from 7 coring wells,utilizing GR,CAL,DEN,AC,CNL and RT logs as input variables.The particle swarm optimization(PSO)was adopted for hyper-parameter optimization of MKFD model.To evaluate the model performance,prediction results of MKFD were compared with those of basic-kernel based KFD,RF and SVM models.Subsequently,the built MKFD model was applied in a blind well test,and a variable importance analysis was conducted.The comparison and blind test results demonstrated that MKFD outperformed traditional KFD,RF and SVM in the identification of reservoir types,which provided higher accuracy and stronger generalization.The MKFD can therefore be a reliable method for identifying reservoir types of deep carbonates.

Facies logging identification of intermediate-basic volcanic rocks in Huoshiling Formation of Songliao Basin

Volcanic oil and gas reservoirs are generally buried deep,which leads to a high whole-well coring cost,and the degree of development and size of reservoirs are controlled by volcanic facies.Therefore,accurately identifying volcanic facies by logging curves not only provides the basis of volcanic reservoir prediction but also saves costs during exploration.The Songliao Basin is a‘fault-depression superimposed’composite basin with a typical binary filling structure.Abundant types of volcanic lithologies and facies are present in the Lishu fault depression.Volcanic activity is frequent during the sedimentary period of the Huoshiling Formation.Through systematic petrographic identification of the key exploratory well(SN165C)of the Lishu fault-depression,which is a whole-well core,it is found that the Huoshiling Formation in SN165C contains four facies and six subfacies,including the volcanic conduit facies(crypto explosive breccia subfacies),explosive facies(pyroclastic flow and thermal wave base subfacies),effusive facies(upper and lower subfacies),and volcanogenic sedimentary facies(pyroclastic sedimentary subfacies).Combining core,thin section,and logging data,the authors established identification markers and petrographic chart logging phases,and also interpreted the longitudinal variation in volcanic petro-graphic response characteristics to make the charts more applicable to this area's volcanic petrographic interpretation of the Huoshiling Formation.These charts can provide a basis for the further exploration and development of volcanic oil and gas in this area.

Application of Secondary Logging Interpretation—Taking Yan 9 Reservoir in X Area as an Example

Logging data and its interpretation results are one of the most important basic data for understanding reservoirs and oilfield development. Standardized and unified logging interpretation results play a decisive role in fine reservoir description and reservoir development. Aiming at the problem of the conflict between the development effect and the initial interpretation result of Yan 9 reservoir in Hujianshan area of Ordos Basin, by combining the current well production performance, logging, oil test, production test and other data, on the basis of making full use of core, coring, logging, thin section analysis and high pressure mercury injection data, the four characteristics of reservoir are analyzed, a more scientific and reasonable calculation model of reservoir logging parameters is established, and the reserves are recalculated after the second interpretation standard of logging is determined. The research improves the accuracy of logging interpretation and provides an effective basis for subsequent production development and potential horizons.

Development of Long-Range,Low-Powered and Smart IoT Device for Detecting Illegal Logging in Forests

Forests promote the conservation of biodiversity and also play a crucial role in safeguarding theenvironment against erosion,landslides,and climate change.However,illegal logging remains a significant threatworldwide,necessitating the development of automatic logging detection systems in forests.This paper proposesthe use of long-range,low-powered,and smart Internet of Things(IoT)nodes to enhance forest monitoringcapabilities.The research framework involves developing IoT devices for forest sound classification andtransmitting each node’s status to a gateway at the forest base station,which further sends the obtained datathrough cellular connectivity to a cloud server.The key issues addressed in this work include sensor and boardselection,Machine Learning(ML)model development for audio classification,TinyML implementation on amicrocontroller,choice of communication protocol,gateway selection,and power consumption optimization.Unlike the existing solutions,the developed node prototype uses an array of two microphone sensors forredundancy,and an ensemble network consisting of Long Short-Term Memory(LSTM)and ConvolutionalNeural Network(CNN)models for improved classification accuracy.The model outperforms LSTM and CNNmodels when used independently and also gave 88%accuracy after quantization.Notably,this solutiondemonstrates cost efficiency and high potential for scalability.

大庆油田CIFLog测井数智云平台建设应用实践

针对大庆油田生产中测井数据量大、类型多和数据来源复杂等问题,以中国石油天然气集团有限公司大型测井处理解释软件CIFLog为基础,以业务需求为主导,采用微服务架构和测井分布式云计算技术体系,研发测井大数据存储管理、中间服务层和云端测井处理解释应用等新功能,形成了大庆油田测井数智云应用平台。目前,平台已全面安装部署到大庆油田相关单位,应用效果显著。特别在大庆油田智能决策中心,平台直接用于重点水平井随钻地质导向的现场决策,大幅提升了Ⅰ类储层的钻遇率。未来平台将重点围绕新功能研发、油田数智化应用场景建设和标准化技术体系构建等开展工作,并将取得的成果及时推广复制到西南油田、塔里木油田等油气田。CIFLog云平台作为中国油气工业软件数智化建设应用的先行典范,必将发挥越来越重要的示范引领作用。

Log4cxx在国产化平台的应用研究

以国产化操作系统、数据库和硬件环境为基础,通过分析和示例详细阐述了使用及扩展Log4cxx日志框架实现日志信息记录和管理的具体方法,为国产化软件的开发和维护提供了高效、可靠、易用的日志解决方案。

基于改进LOG算子与Otsu算法结合的物体表面图像残损检测方法

针对物体表面残损区域存在明显的亮缺陷和不明显的暗缺陷这一特性,构建一种基于改进LOG算子与Otsu算法相结合的物体表面残损区域缺陷的边缘检测方法。首先,针对传统的LOG算子在检测图像亮缺陷边缘时检测结果不准确的问题,引入可根据图像特性自动调整模糊因子的Wiener滤波代替传统LOG算子中的高斯滤波,以提高图像亮缺陷检测的精度;其次,针对检测图像暗缺陷边缘时结果不准确的问题,使用Otsu算法分析图像暗缺陷的灰度直方图来自动确定阈值,以提升暗缺陷边缘检测准确率;最后,采用像素加权平均融合算法对检测出的物体表面图像亮、暗缺陷边缘进行融合,以实现物体表面残损缺陷检测。实验结果表明:相较于单独使用改进的LOG算子和Otsu算法,采用加权融合的方法检测到的缺陷像素点数量与原始图片中基本一致,能够更准确地对图像中物体表面残损区域的亮、暗缺陷边缘进行检测。

Well logging evaluation of fine-grained hydrate-bearing sediment reservoirs: Considering the effect of clay content

Hydrate reservoirs are different from the host reservoirs of all other fossil energy sources because the characteristics of hydrate reservoirs are generally controlled by deep-sea fine-grained sedimentation. In such reservoirs, the reliability of the classical logging evaluation models established for diagenetic reservoirs is questionable. This study used well W8 in the Qiongdongnan Basin to explore the clay content, porosity, saturation, and hydrate-enriched layer identification of a logging-based hydrate reservoir, and it was found that considering the effect of the clay content on the log response is necessary in the logging evaluation of hydrate reservoirs. In the evaluation of clay content, a method based on the optimization inversion method can obtain a more reliable clay content than other methods. Fine-grained sediment reservoirs have a high clay content, and the effect of clay on log responses must be considered when calculating porosity. In addition, combining density logging and neutron porosity logging data can obtain the best porosity calculation results, and the porosity calculation method based on sonic logging predicted that the porosity of the studied reservoir was low. It was very effective to identify hydrate layers based on resistivity, but the clay distribution and pore structure will also affect the relationship between resistivity, porosity and saturation, and it was suggested that the factors effecting the resistivity of different layers should be considered in the saturation evaluation and that a suitable model should be selected. This study also considered the lack of clarity of the relationships among the lithology, physical properties, hydrate-bearing occurrence properties, and log response properties of hydrate reservoirs and the lack of specialized petrophysical models. This research can directly help to improve hydrate logging evaluation.

Logging curves characteristics and response mechanisms of basaltic facies and sub-facies: A case study from eastern sag of Liaohe depression, Northeast China

Based on five types of conventional logging curves including GR,RLLD,CNL,DEN and AC,and 39 core samples from 30 representative boreholes,the logging characteristics and lithofacies and sub-facies of the basaltic rocks were studied.Three basaltic facies and four sub-facies are recognized from the well logs,includ-ing volcanic conduit facies(post intrusive sub-facies),explosive facies,and effusive lava flow facies(tabular flow,compound flow and hyaloclastite sub-facies).The post intrusive,tabular flow and compound flow sub-facies logging curves are mainly controlled by the distribution of vesiculate zones and vesiculate content,which are characterized by four curves with good correlation.Post intrusive sub-facies are characterized by high RLLD,high DEN,with a micro-dentate logging curve pattern,abrupt contact relationships at the top and base.Tabular flow sub-facies are characterized by high RLLD,high DEN,with a bell-shaped log curve pattern,abrupt contact at the base and gradational contact at the top.Compound flow sub-facies are characterized by medium-low RLLD,with a micro-dentate or finger-like logging curve pattern,abrupt contact at the base and gradational contact at the top.Explosive facies and hyaloclastite sub-facies logging curves are mainly controlled by the distribution of the size and sorting of rock particles,which can be recognized by four kinds of logging curves with poor cor-relation.Explosive facies are characterized by low RLLD,medium-low CNL and low DEN,with a micro-dentate logging curve pattern.Hyaloclastite sub-facies are characterized by low RLLD,high CNL,low DEN and high AC,with a micro-dentate logging curve pattern.The present research is beneficial for the prediction of basaltic reser-voirs not only in the Liaohe depression but also in the other volcanic-sedimentary basins.

The sensitivity of the array resistivity log to mud filtrate invasion and its primary five-parameter inversion for improved oil water recognition

In order to improve reservoir fluid recognition, the sensitivity of array resistivity response to the difference of the invasion properties in both oil-bearing layers and water layers is analyzed. Then the primary inversion is carried out based on the array resistivity log. The mud invasion process is numerically simulated based on the oil-water flow equation and water convection diffusion equation. The results show that the radial resistivity of a fresh mud-invaded oil-bearing layer presents complex distribution characteristics, such as nonlinear increase, increasing to decreasing and low resistivity annulus, and the resistive invasion profile of a water layer is monotonic. Under specific conditions, array resistivity log can reflect these changes and the array induction log is more sensitive. Nevertheless, due to the effect of factors like large invasion depth, reservoir physical and oil-bearing properties, the measured apparent resistivity may differ greatly from the actual mud filtrate invasion profile in an oil-bearing layer. We proposed a five-parameter formation model to simulate the complex resistivity distribution of fresh mud-invaded formation. Then, based on the principle of non-linear least squares, the measured array resistivity log is used for inversion with the Marquardt method. It is demonstrated that the inverted resistivity is typically non-monotonic in oil-bearing layers and is monotonic in water layers. Processing of some field data shows that this is helpful in achieving efficient reservoir fluid recognition.

Total organic carbon content logging prediction based on machine learning:A brief review

The total organic carbon content usually determines the hydrocarbon generation potential of a formation.A higher total organic carbon content often corresponds to a greater possibility of generating large amounts of oil or gas.Hence,accurately calculating the total organic carbon content in a formation is very important.Present research is focused on precisely calculating the total organic carbon content based on machine learning.At present,many machine learning methods,including backpropagation neural networks,support vector regression,random forests,extreme learning machines,and deep learning,are employed to evaluate the total organic carbon content.However,the principles and perspectives of various machine learning algorithms are quite different.This paper reviews the application of various machine learning algorithms to deal with total organic carbon content evaluation problems.Of various machine learning algorithms used for TOC content predication,two algorithms,the backpropagation neural network and support vector regression are the most commonly used,and the backpropagation neural network is sometimes combined with many other algorithms to achieve better results.Additionally,combining multiple algorithms or using deep learning to increase the number of network layers can further improve the total organic carbon content prediction.The prediction by backpropagation neural network may be better than that by support vector regression;nevertheless,using any type of machine learning algorithm improves the total organic carbon content prediction in a given research block.According to some published literature,the determination coefficient(R^(2))can be increased by up to 0.46 after using machine learning.Deep learning algorithms may be the next breakthrough direction that can significantly improve the prediction of the total organic carbon content.Evaluating the total organic carbon content based on machine learning is of great significance.

Relational Logging Design Pattern

Observability and traceability of developed software are crucial to its success in software engineering.Observability is the ability to comprehend a system’s internal state from the outside.Monitoring is used to determine what causes system problems and why.Logs are among the most critical technology to guarantee observability and traceability.Logs are frequently used to investigate software events.In current log technologies,software events are processed independently of each other.Consequently,current logging technologies do not reveal relationships.However,system events do not occur independently of one another.With this perspective,our research has produced a new log design pattern that displays the relationships between events.In the design we have developed,the hash mechanism of blockchain technology enables the display of the logs’relationships.The created design pattern was compared to blockchain technology,demonstrating its performance through scenarios.It has been determined that the recommended log design pattern outperforms blockchain technology in terms of time and space for software engineering observability and traceability.In this context,it is anticipated that the log design pattern we provide will strengthen the methods used to monitor software projects and ensure the traceability of relationships.

Response analyses on the drill-string channel for logging while drilling telemetry

Downhole acoustic telemetry(DAT),using a long drill string with periodical structures as the channel,is a prospective technology for improving the transmission rate of logging while drilling(LWD)data.Previous studies only focused on the acoustic property of a free drill string and neglected the coupling between pipes and fluid-filled boreholes.In addition to the drill-string waves,a series of fluid waves are recorded in the DAT channel,which has not been investigated yet.Unpredictable channel characteristics result in lower transmission rates and stability than expected.Therefore,a more realistic channel model is needed considering the fluid-filled borehole.In this paper,we propose a hybrid modeling method to investigate the response characteristics of the DAT channel.By combining the axial wavenumbers and excitation functions of mode waves in radially layered LWD structures,the channel model is approximated to the 1-D propagation,which considers transmission,reflection,and interconversion of the drillstring and fluid waves.The proposed 1-D approximation has been well validated by comparing the 2-D finite-difference modeling.It is revealed that the transmitted and converted fluid waves interfere with the drill-string wave,which characterizes the DAT channel as a particular coherent multi-path channel.When a fluid-filled borehole surrounds the drill string,the channel responses exhibit considerable delay as well as strong frequency selectivity in amplitude and phase.These new findings suggest that the complexity of the channel response has been underestimated in the past,and therefore channel measurements on the ground are unreliable.To address these channel characteristics,we apply a noncoherent demodulation strategy.The transmission rate for synthetic data reaches 15 bps in a 94.5 m long channel,indicating that the acoustic telemetry is promising to break the low-speed limitation of mud-pulse telemetry.

ModelLogVis:面向模型服务的日志异常可视分析方法

利用深度学习模型训练和运行维护过程产生的海量日志信息,进行模型的优化与故障排查,是当前人工智能运维的研究热点.针对现有工作缺少模型工作流分析的问题,提出面向模型服务的日志异常可视分析方法ModelLogVis.该方法采用日志异常检测方法定位模型工作流中的潜在故障,帮助用户聚焦主要的故障类型;支持用户从数据流、状态、实例性能和原始日志等多个角度对工作流中的事件进行交互式可视化与分析,快速、准确地排查问题.通过真实的模型服务数据的案例研究和专家访谈,证明ModelLogVis方法可高效地辅助用户快速挖掘日志中的异常信息.

LogRank++:一种高效的业务过程事件日志采样方法

针对已有采样方法处理大规模事件日志时存在采样效率低的问题,提出一种高效的业务过程事件日志采样方法LogRank++。首先确定轨迹的重要性特征,然后对计算轨迹的重要性值进行排序,最后选择一组最重要的轨迹组成样本日志。综合采样质量和采样效率两方面来评估此采样方法的高效性。所提采样方法已在开源过程挖掘工具平台ProM中实现。实验分析表明,相比已有采样方法,在保证样本日志质量的前提下,LogRank++能够大幅提高日志采样效率。

Characterization of reservoir properties and pore structure based on micro-resistivity imaging logging: Porosity spectrum, permeability spectrum, and equivalent capillary pressure curve

According to the capillary theory,an equivalent capillary model of micro-resistivity imaging logging was built.On this basis,the theoretical models of porosity spectrum(Ф_(i)),permeability spectrum(K_(i))and equivalent capillary pressure curve(pe)were established to reflect the reservoir heterogeneity.To promote the application of the theoretical models,the Archie's equation was introduced to establish a general model for quantitatively characterizing bi,K,and pei.Compared with the existing models,it is shown that:(1)the existing porosity spectrum model is the same as the general equation of gi;(2)the Ki model can display the permeability spectrum as compared with Purcell's permeability model;(3)the per model is constructed on a theoretical basis and avoids the limitations of existing models that are built only based on the component of porosity spectrum,as compared with the empirical model of capillary pressure curve.The application in the Permian Maokou Formation of Well TsX in the Central Sichuan paleo-uplift shows that the Ф_(i),K_(i),and p_(ci) models can be effectively applied to the identification of reservoir types,calculation of reservoir properties and pore structure parameters,and evaluation of reservoir heterogeneity.

HiLog:OpenHarmony的高性能日志系统

日志是计算机系统中记录事件状态信息的的重要载体,日志系统负责计算机系统的日志生成、收集和输出.OpenHarmony是新兴的、面向全设备、全场景的开源操作系统.在所述工作之前,包括日志系统在内OpenHarmony有许多关键子系统尚未构建,而OpenHarmony的开源特性使第三方开发者可以为其贡献核心代码.为了解决Open Harmony日志系统缺乏的问题,主要开展如下工作:(1)分析当今主流日志系统的技术架构和优缺点;(2)基于OpenHarmony操作系统的异构设备互联特性设计HiLog日志系统模型规范;(3)设计并实现第1个面向OpenHarmony的日志系统HiLog,并贡献到OpenHarmony主线;(4)对HiLog日志系统的关键指标进行测试和对比试验.实验数据表明,在基础性能方面,HiLog和Log的日志写入阶段吞吐量分别为1500 KB/s和700 KB/s,相比Android日志系统吞吐量提升114%;在日志持久化方面,HiLog可以3.5%的压缩率进行持久化,并且丢包率小于6‰,远低于Log.此外,HiLog还具备数据安全、流量控制等新型实用能力.

Soil Seed Bank Characteristics in Congolese Rainforests and Implications for Post-Logging Plots Reforestation

The soil seed bank is considered as an important mechanism for the natural regeneration, resilience and conservation of the forests after disturbances. This study evaluates the characteristics of the soil seed bank in two post-logging plots of Loundoungou-Toukoulaka Forest Management Unit: one plot exploited in 2008 and another exploited in 2021. In each study plot, 40 samples were collected per soil layer (0 - 5 cm, 5 - 10 cm, 10 - 15 cm, 15 - 20 cm and 20 - 25 cm depth). The species diversity and abundance of the soil seed bank were estimated after soil samples were brought to germination. The results demonstrated that 347 seedlings belonging to 37 species in the plot exploited in 2008 and 418 seedlings belonging to 27 species in that exploited in 2021 germinated during 20 weeks of monitoring. The total densities of the seedlings identified were respectively 1446 seedlings/m2 and 1742 seedlings/m2. The plot exploited in 2021 presented a higher proportion of herbaceous species (93.78%) compared to that exploited in 2008 (82.71%). Two pioneer species were recorded in the plot exploited in 2008. These are Macaranga barteri (0.29%) in the 0 - 5 cm layer and Musanga cecropioides (2.31%) up to 20 cm deep. On the other hand, in the plot exploited in 2021, Macaranga spinosa (0.96%) in the 0 - 5 cm layer and M. cecropioides (0.96%) up to 20 cm deep were identified. In the plot exploited in 2008, the 20 - 25 cm layer demonstrated important proportions in woody species (9%), these are in particular Rubiaceae sp.4 and Nauclea diderrichii. While that exploited in 2021, presented 19% of woody species, namely the species of Rubiaceae sp.4, Rubiaceae sp.5 and N. diderrichii, greatly exceeding the proportions obtained in the 15 - 20 cm layer of the two plots. Nonetheless, N. diderrichii was the only commercial species recorded with densities of 108 seedlings/m2 and 4 seedlings/m2, respectively in the plot exploited in 2008 and that exploited in 2021. Commercial tree species are poorly represented in the soil seed bank. Consequently, the study suggests that to improve the natural regeneration of the commercial species, silvicultural interventions based on planting techniques in the exploited plots should be more effective in order to sustainably manage these production forests.

含零收益率的金融非对称Log-GARCH模型研究

在实际外汇市场中,由于诸如交易缺失、舍入误差等原因使得收益率序列中出现零值,常见GARCH族模型无法对含零收益率数据进行有效拟合,导致波动率估计结果产生较大偏差。为了更准确地估计汇率波动率,本文对含有零收益率的外汇数据进行建模。首先运用不受条件方差为正限制的log-GARCH模型对汇率市场收益率数据进行拟合,同时提出一个处理含有零收益率的数据处理框架,即将零值视为缺失的观测值。然后通过结合QMLE方法和期望最大化(EM)算法对含缺失观测值的log-GARCH模型进行无偏估计。最后通过实证分析比较零收益率两种不同处理方法——非零值代替零值方法和将零值视为缺失值方法下波动率估计结果的差异。研究结果显示零收益率的存在会增加波动率的估计偏差,将非零值作为缺失值方法得到的估计结果更接近市场真实情况。