This paper obtains asymptotic normality for double array sum of linear time series zeta(t), and gives its application in the regression model. This generalizes the main results in [1].
This article studies parametric component and nonparametric component estimators in a semiparametric regression model with linear time series errors; their r-th mean consistency and complete consistency are obtained u...This article studies parametric component and nonparametric component estimators in a semiparametric regression model with linear time series errors; their r-th mean consistency and complete consistency are obtained under suitable conditions. Finally, the author shows that the usual weight functions based on nearest neighbor methods satisfy the designed assumptions imposed.展开更多
Traditional parafoil homing usually uses a point as object. As the mobility of parafoil is limited by its glide ratio and wind, in some cases when the parafoil scatter area is large, or the glide ratio of parafoil is ...Traditional parafoil homing usually uses a point as object. As the mobility of parafoil is limited by its glide ratio and wind, in some cases when the parafoil scatter area is large, or the glide ratio of parafoil is small, the deviation of its landing point to object point will be arduous to control. Accordingly, during these situations, when parafoil is used in recovery of spacecraft or satellite, the landing area of parafoil can be set as a rectangle, and the object of parafoil can be set as a line segment. The thesis of this work is designing an algorithm for parafoil homing using line segment as object. The algorithm of wind velocity and direction calculation in different flying segments was also investigated. The algorithm designed navigates the parafoil to land into the predestined area and largely reduce the probability of recovery loads falling to unwanted area to damage houses and people.展开更多
In order to decrease the deformation and stress and increase the natural frequency of the fixed table,a method of optimization driven by the sensitivity and topology analyses is proposed.The finite element model of th...In order to decrease the deformation and stress and increase the natural frequency of the fixed table,a method of optimization driven by the sensitivity and topology analyses is proposed.The finite element model of the fixed table is constructed and analyzed by using ANSYS software.Based on the results of static analysis and modal analysis,the maximum deformation,the maximum stress,and natural frequencies are obtained.Then,the sensitivity analysis and topology optimization are carried out to find out the parameters to be optimized.The fixed table is reconstructed according to optimal design scheme.In the comparison of the results between original model and the optimized one,the maximum deformation and stress are decreased by 71.73%and 60.27%respectively.At the same time,the natural frequencies from the first mode to the sixth mode are increased by 30.28%,29.57%,29.51%,31.52%,22.19%,and 21.80%,respectively.The method can provide technology guide for the design and optimization of machining structure.展开更多
Fatigue design method is usually used for estimating whether a platform structure meets the requirements of fatigue resistance. It is described in API RP-2A and ZC rules for fixed offshore platforms, in which the allo...Fatigue design method is usually used for estimating whether a platform structure meets the requirements of fatigue resistance. It is described in API RP-2A and ZC rules for fixed offshore platforms, in which the allowable stresses for fatigue design are defined. In this paper discussed are the allowable stresses related factors, such as wave climate, structural response, fatigue behaviour of structural members.展开更多
This use of biomass-based adsorbent has been explored for the column study of the adsorptive dehydration of water in ethanol-water mixtures. The column study was carried out using enzyme modified corn starch and the b...This use of biomass-based adsorbent has been explored for the column study of the adsorptive dehydration of water in ethanol-water mixtures. The column study was carried out using enzyme modified corn starch and the breakthrough curve parameters were used to design the packed bed column. The effect of flow rate on the breakthrough curves revealed that adsorption efficiency decreased with increased inflow rate. The empty bed contact time (τ) of the pilot plant packed column was 35.35 min while the breakthrough time is 40.78 min. 66.7% was the fraction of capacity left unused for the pilot plant from the design.展开更多
This paper analyzes the seismicity in Bohai Sea,introducing a shape factor K to characterize the seismic risk distribution in sub-regions of the sea. Based on the seismic design ground motions for 46 platforms located...This paper analyzes the seismicity in Bohai Sea,introducing a shape factor K to characterize the seismic risk distribution in sub-regions of the sea. Based on the seismic design ground motions for 46 platforms located in the Bohai Sea,a statistical analysis was performed for different peak ground acceleration (PGA) ratios at two different probability levels. In accordance with the two-stage design method,a scheme of two seismic design levels is proposed,and two seismic design objectives are established respectively for the strength level earthquake and the ductility level earthquake. By analogy with and comparison to the Chinese seismic design code for buildings,it is proposed that the probability level for the strength level earthquake and ductility level earthquake have a return period of 200 and 1000 - 2500 years,respectively. The validity of these proposed values is discussed. Finally,the PGAs corresponding to these two probability levels are calculated for different sub-regions of the Bohai Sea.展开更多
基金the National Natural ScienceFoundation of China(19971001)
文摘This paper obtains asymptotic normality for double array sum of linear time series zeta(t), and gives its application in the regression model. This generalizes the main results in [1].
基金This article was supported by the National Natural Science Foundation of China(10571001)the Innovation Group Foundation of Anhui University
文摘This article studies parametric component and nonparametric component estimators in a semiparametric regression model with linear time series errors; their r-th mean consistency and complete consistency are obtained under suitable conditions. Finally, the author shows that the usual weight functions based on nearest neighbor methods satisfy the designed assumptions imposed.
基金Project(61503077)supported by the National Natural Science Foundation of ChinaProject(BK20130628)supported by the Jiangsu Natural Science Foundation,China
文摘Traditional parafoil homing usually uses a point as object. As the mobility of parafoil is limited by its glide ratio and wind, in some cases when the parafoil scatter area is large, or the glide ratio of parafoil is small, the deviation of its landing point to object point will be arduous to control. Accordingly, during these situations, when parafoil is used in recovery of spacecraft or satellite, the landing area of parafoil can be set as a rectangle, and the object of parafoil can be set as a line segment. The thesis of this work is designing an algorithm for parafoil homing using line segment as object. The algorithm of wind velocity and direction calculation in different flying segments was also investigated. The algorithm designed navigates the parafoil to land into the predestined area and largely reduce the probability of recovery loads falling to unwanted area to damage houses and people.
基金National Major Scientific&Technological Special Program for"High-Grade CNC and Basic Manufacturing Equipment"of China(No.2012ZX04011-031)Science and Technology Programs of Sichuan Province,China(No.2010GZ0250,No.2011GZ0075)
文摘In order to decrease the deformation and stress and increase the natural frequency of the fixed table,a method of optimization driven by the sensitivity and topology analyses is proposed.The finite element model of the fixed table is constructed and analyzed by using ANSYS software.Based on the results of static analysis and modal analysis,the maximum deformation,the maximum stress,and natural frequencies are obtained.Then,the sensitivity analysis and topology optimization are carried out to find out the parameters to be optimized.The fixed table is reconstructed according to optimal design scheme.In the comparison of the results between original model and the optimized one,the maximum deformation and stress are decreased by 71.73%and 60.27%respectively.At the same time,the natural frequencies from the first mode to the sixth mode are increased by 30.28%,29.57%,29.51%,31.52%,22.19%,and 21.80%,respectively.The method can provide technology guide for the design and optimization of machining structure.
文摘Fatigue design method is usually used for estimating whether a platform structure meets the requirements of fatigue resistance. It is described in API RP-2A and ZC rules for fixed offshore platforms, in which the allowable stresses for fatigue design are defined. In this paper discussed are the allowable stresses related factors, such as wave climate, structural response, fatigue behaviour of structural members.
文摘This use of biomass-based adsorbent has been explored for the column study of the adsorptive dehydration of water in ethanol-water mixtures. The column study was carried out using enzyme modified corn starch and the breakthrough curve parameters were used to design the packed bed column. The effect of flow rate on the breakthrough curves revealed that adsorption efficiency decreased with increased inflow rate. The empty bed contact time (τ) of the pilot plant packed column was 35.35 min while the breakthrough time is 40.78 min. 66.7% was the fraction of capacity left unused for the pilot plant from the design.
基金the 2007 Special Research Project 8-55 of the Department of Finance and the State Science and Technology Support Project 2006BAC13B02
文摘This paper analyzes the seismicity in Bohai Sea,introducing a shape factor K to characterize the seismic risk distribution in sub-regions of the sea. Based on the seismic design ground motions for 46 platforms located in the Bohai Sea,a statistical analysis was performed for different peak ground acceleration (PGA) ratios at two different probability levels. In accordance with the two-stage design method,a scheme of two seismic design levels is proposed,and two seismic design objectives are established respectively for the strength level earthquake and the ductility level earthquake. By analogy with and comparison to the Chinese seismic design code for buildings,it is proposed that the probability level for the strength level earthquake and ductility level earthquake have a return period of 200 and 1000 - 2500 years,respectively. The validity of these proposed values is discussed. Finally,the PGAs corresponding to these two probability levels are calculated for different sub-regions of the Bohai Sea.
