Comparative Performance of Fixed-Speed and Variable-Speed Wind Turbine Generator Systems

In the early development of the wind energy, the majority of the wind turbines have been operated at constant speed. Subsequently, the number of variable-speed wind turbines installed in wind farms has increased. In this paper, a comparative performance of fixed and variable speed wind generators with Pitch angle control has been presented. The first is based on a squirrel cage Induction Generator （IG） of 315 kW rated power, connected directly to the grid. The second incorporated a Permanent Magnet Synchronous Generator （PMSG） of 750 kW rated power. The performances of each studied wind generator are evaluated by simulation works and variable speed operation is highlighted as preferred mode of operation.

Design of speed controller for electronic fuel injection gasoline generator based on feed-forward PID control

As for the application of electronic fuel injection （EFI） system to small gasoline generator set, mechanical speed controller cannot be coupled with EFI system and has the shortcomings of lagged regulation and poor accuracy, a feed-forward control strategy based on load combined with proportional-integral-differential （PID） control strategy was proposed, and a digital speed controller applied to the electrical control system was designed. The detailed control strategy of the controller was intro- duced. The hardware design for the controller and the key circuits of motor driving, current sampling and angular signal captu- ring were given, and software architecture was discussed. Combined with a gasoline generator set mounted with EFI system, the controller parameters were tuned and optimized empirically by hardware in loop and bench test methods. Test results show that the speed deviation of generator set is low and the control system is stable in steady state; In transient state the control system responses quickly, has high stability under mutation loads especially when suddenly apply and remove 100% load, the speed deviation is within 8% of reference speed and the transient time is less than 5 s, satisfying the ISO standard.

Performance analysis of 20 Pole 1.5 KW Three Phase Permanent Magnet Synchronous Generator for low Speed Vertical Axis Wind Turbine

This paper gives performance analysis of a three phase Permanent Magnet Synchronous Generator (PMSG) connected to a Vertical Axis Wind Turbine (VAWT). Low speed wind condition (less than 5 m/s) is taken in consideration and the entire simulation is carried in Matlab/Simulink environment. The rated power for the generator is fixed at 1.5 KW and number of pole at 20. It is observed under low wind speed of6 m/s, a turbine having approximately1 mof radius and2.6 mof height develops 150 Nm mechanical torque that can generate power up to 1.5 KW. The generator is designed using modeling tool and is fabricated. The fabricated generator is tested in the laboratory with the simulation result for the error analysis. The range of error is about 5%-27% for the same output power value. The limitations and possible causes for error are presented and discussed.

Switched Reluctance Generator for Variable Speed Wind Energy Applications

The aim of this paper is to analyze the potential of switched reluctance generator (SRG) in wind energy application. The machine comprises of switched reluctance generator, power converter and controller. In this paper the main ele-ments that form the generator system is discussed. It also highlights the common type of converter and structure used for SRG in wind energy application and types of control strategy available. Using power converter for switching the generator can operate over a wide speed range. Its applications in high speed area such as starter/generator for air-craft and gas turbine has been established, however the low/medium speed operation is still at an early stage of re-search. In order to subject the machine to various parameters, offline modeling is being investigated to produce the best optimum design.

A Gain Scheduled Method for Speed Control of Wind Driven Doubly Fed Induction Generator

This paper proposes a gain scheduled control method for a doubly fed induction generator driven by a wind turbine. The purpose is to design a variable speed control system so as to extract the maximum power in the region below the rated wind speed. Gain scheduled control approach is applied in order to achieve high performance over a wide range of wind speed. A double loop configuration is adopted. In the inner loop, the rotor speed is used as the scheduling parameter, while a function of wind and rotor speed is used as the scheduling parameter in the outer loop. It is verified in simulations that a high tracking performance has been achieved.

OPTIMAL DESIGN OF DUAL STATOR-WINDING INDUCTION GENERATOR WITH PWM CONVERTER

To minimize the reactive power of the converter of the control winding in the novel dual stator-winding induction generator based on the PWM converter, design features of the induction generator with a rectified load are proposed. The optimization method of excited capacitors to minimize the reactive power of the control winding at a variable speed is given. The calculation capacity of the machine with a diode bridge rectifier load is proposed. To achieve global searching, the integrated method with the improved real-coded genetic algorithm and the twodimensional finite element method （FEM） is introduced. Design results of the sample show that reactive power can be reduced by the method, and the converter capacity can be decreased to 1/3 of output rated power at the speed ratio of 1 ： 3, thus reducing the volume and the mass of the inverter.

A Novel Open-winding Permanent Magnetic Starter-generator

针对永磁电机应用于车载起动／发电系统时存在的电压调节困难、适用转速范围窄、功率因数较低等问题，提出一种新型永磁车载起动／发电系统。通过引入绕组开路型永磁电机，绕组一端接整流桥形成输出直流侧，另一端接逆变桥形成控制端，构成具有宽转速范围和高效率的永磁电机起动／发电系统。分析该系统的起动、发电一体化工作原理，给出了通过逆变侧变换器实现发电机电压、电流控制的方案。仿真和实验结果表明，该新型车载起动／发电系统具有优良的发电调压控制性能，并且适应较宽的转速范围。

Nonlinear Dynamic Characteristic Analysis of the Shaft System in Water Turbine Generator Set

A 3D finite element vibration model of water turbine generator set is constructed considering the coupling with hydropower house foundation. The method of determining guide bearing dynamic characteristic coefficients according to the swing of the shaft is proposed, which can be used for studying the self-vibration characteristic and stability of the water turbine generator set. The method fully considers the complex supporting boundary and loading conditions; especially the nonlinear variation of guide bearing dynamic characteristic coefficients and the coupling effect of the whole power-house foundation. The swing and critical rotating speed of an actual generator set shaft system are calculated. The simulated results of the generator set indicate that the coupling vibration model and calculation method presented in this paper are suitable for stability analysis of the water turbine generator set.

Eco-Friendly Selection of Diesel Generator Based on Genset-Synchro Technology for Off-Grid Remote Area Application in the North of Quebec

For most of their energy requirements, greater part of remote communities and small islands around the world rely on imported fossil fuels. The economical cost of energy is therefore very high not only due to inherent cost of fuel, but also due to transportation and due to maintenance costs. One solution for saving fuel in a diesel generator is to allow the engine to operate directly in relation to the request for electrical load at variable speeds. Genset-Synchro Technology has developed an innovative variable speed?generator technology (patent pending) that allows applications where power demand varies widely to benefit from the new technology that maintains constant voltage and frequency while adjusting the generator stator speed to power demand. This paper will present an innovative approach for optimizing the energy production based from the fact that the structure that contains the stator windings of the generator is mounted on roller bearings, which allows its free rotation around the axis of the rotor, consequently stopping the stator structure from being static and aims to minimize the unit cost of electricity. Case study on application in remote area in the north of Quebec is described. A saving of 7%?-?9% on fuel consumption and greenhouse gas (GHG) under low winter ambient temperatures has been registered.

Free vibration and critical speed of moderately thick rotating laminated composite conical shell using generalized differential quadrature method

The generalized differential quadrature method （GDQM） is employed to con- sider the free vibration and critical speed of moderately thick rotating laminated compos- ite conical shells with different boundary conditions developed from the first-order shear deformation theory （FSDT）. The equations of motion are obtained applying Hamilton＇s concept, which contain the influence of the centrifugal force, the Coriolis acceleration, and the preliminary hoop stress. In addition, the axial load is applied to the conical shell as a ratio of the global critical buckling load. The governing partial differential equations are given in the expressions of five components of displacement related to the points ly- ing on the reference surface of the shell. Afterward, the governing differential equations are converted into a group of algebraic equations by using the GDQM. The outcomes are achieved considering the effects of stacking sequences, thickness of the shell, rotating velocities, half-vertex cone angle, and boundary conditions. Furthermore, the outcomes indicate that the rate of the convergence of frequencies is swift, and the numerical tech- nique is superior stable. Three comparisons between the selected outcomes and those of other research are accomplished, and excellent agreement is achieved.

Neutrino speed can exceed the speed of light within the frame work of the generlized special relativity and savckas model

The speed of Neutrino particles is shown to be greater than that of light as shown by the OPERA neutrino experiment at the underground Gran Sasso Laboratory. The result of this experiment can be explained within the framework of the Generalized Special Relativity and Savickas model.

Evaluating Traffic Congestion Using the Traffic Occupancy and Speed Distribution Relationship: An Application of Bayesian Dirichlet Process Mixtures of Generalized Linear Model

Accurate classification and prediction of future traffic conditions are essential for developing effective strategies for congestion mitigation on the highway systems. Speed distribution is one of the traffic stream parameters, which has been used to quantify the traffic conditions. Previous studies have shown that multi-modal probability distribution of speeds gives excellent results when simultaneously evaluating congested and free-flow traffic conditions. However, most of these previous analytical studies do not incorporate the influencing factors in characterizing these conditions. This study evaluates the impact of traffic occupancy on the multi-state speed distribution using the Bayesian Dirichlet Process Mixtures of Generalized Linear Models (DPM-GLM). Further, the study estimates the speed cut-point values of traffic states, which separate them into homogeneous groups using Bayesian change-point detection (BCD) technique. The study used 2015 archived one-year traffic data collected on Florida’s Interstate 295 freeway corridor. Information criteria results revealed three traffic states, which were identified as free-flow, transitional flow condition (congestion onset/offset), and the congested condition. The findings of the DPM-GLM indicated that in all estimated states, the traffic speed decreases when traffic occupancy increases. Comparison of the influence of traffic occupancy between traffic states showed that traffic occupancy has more impact on the free-flow and the congested state than on the transitional flow condition. With respect to estimating the threshold speed value, the results of the BCD model revealed promising findings in characterizing levels of traffic congestion.

Performance Analysis of Composite Magnetic Circuit Permanent Magnet Wind Generator

In order to reduce the starting wind speed of the wind wheel and improve the efficiency of the wind wheel, this paper proposes a new type of composite magnetic circuit permanent magnet generator, which changes the relationship between the magnetic induction intensity and the air gap by changing the structure of the main magnetic circuit. The structure greatly improves the air gap sensitivity of the generator, which makes the structural design of the permanent magnet generator easier to implement. Finally, the effectiveness and feasibility of the method are verified by simulation.

Electromagnetic and Mechanical Stress Analysis of Wind-Driven Synchronous Reluctance Generator

The investigation explores the mechanical stress and electromagnetic performance for a wind-driven synchronous reluctance generator(SRG).The change in the mechanical stress due to the presence of centripetal force,wind speed,and rotor speed are evaluated for different thickness of tangential and radial ribs.Moreover,the variation in the electromagnetic feature such as the q−and d−axes flux,reactance ratio,inductance,torque and torque ripple are discussed for different thickness of tangential and radial ribs.Increasing both tangential and radial ribs thickness has an effect on the electromagnetic performance,but it is observed that effect is significantly more with the variation of tangential rib thickness.Similarly,the mechanical stress analysis for rotor design has been explored in this paper.It is observed that high concentration of peak stress on the rotor ribs,which limits the range of rotor speed.

Study of simple plane wave generator with an air-metal barrier

Plane wave generators(PWGs) are used to accelerate flyer plates to high velocities with their generated plane waves,which are widely used in the test of dynamic properties of materials.The traditional PWG is composed of two explosives with different detonation velocities.It is difficult to implement the related fabrication processes and control the generated waves due to its complicated structures.A simple plane wave generator is presented in this paper,which is composed of two identical cylindrical high explosive(HE) charges and an air-metal barrier.A theoretical model was established based on two different paths of the propagation of detonation waves,based on which the size of air-metal barrier was calculated for a given charge.The corresponding numerical simulations were also carried out by AUTODYN-2D based on the calculated results,which were used to compare with the theoretical calculations.A detonation wave with a flatness of 0.039 μs within the range of 70-percent diameter of the main charge was obtained through the simulations.

Rapid generation advance(RGA) in chickpea to produce up to seven generations per year and enable speed breeding

This study was aimed at developing a protocol for increasing the number of generation cycles per year in chickpea(Cicer arietinum L.).Six accessions,two each from early(JG 11 and JG 14),medium(ICCV 10 and JG 16),and late(CDC-Frontier and C 235)maturity groups,were used.The experiment was conducted for two years under glasshouse conditions.The photoperiod was extended to induce early flowering and immature seeds were germinated to further reduce generation cycle time.Compared to control,artificial light caused a reduction in flowering time by respectively 8–19,7–16,and 11–27 days in early-,medium-,and late-maturing accessions.The earliest stage of immature seed able to germinate was 20–23 days after anthesis in accessions of different maturity groups.The time period between germination and the earliest stage of immature seed suitable for germination was considered one generation cycle and spanned respectively 43–60,44–64,and 52–79 days in early-,medium-,and late-maturing accessions.However,the late-maturing accession CDCFrontier could not be advanced further after three generation cycles owing to the strong influence of photoperiod and temperature.The mean total number of generations produced per year were respectively 7,6.2,and 6 in early-,medium-,and late-maturing accessions.These results have encouraging implications for breeding programs:rapid progression toward homozygosity,development of mapping populations,and reduction in time,space and resources in cultivar development(speed breeding).

GENERAL DECAY FOR A POROUS-THERMOELASTIC SYSTEM WITH MEMORY: THE CASE OF NONEQUAL SPEEDS

The aim of this paper is to establish a general decay result for a one-dimensional porous elastic system with different speeds of wave propagation in the presence of macrotem- perature effect and visco-porous dissipation.

High Efficiency Double–Fed Induction Generator Applied to Wind Power Generator Technical Analyses

High efficiency Double-Fed Induction Generator applies new power electronic technology, and utilizes vector control to fix the magnetic direction of the stator to the vertical axis. Adjusting the input current of rotor via an inverter can separately control the cross axis and vertical axis current of real power and reactive power of a generator. Traditionally, rotating speed affects frequency and the output is unstable. This study concentrates on high efficiency Double-Fed Induction Generators and Traditional Generators from mathematic model to derive and control the characteristics simulation and comparison than get an output of high efficiency Double-Fed Industrial Generators. This study utilizes the simulation software MATLAB/Simulink to simulate the response characteristics of vector control of a Double-Fed Industrial Generator. The operating and control functions are better than those of a traditional generator.