A novel method was developed to enhance the utilization rate of steel slag(SS).Through treatment of SS with phosphoric acid and aminopropyl triethoxysilane(KH550),we obtained modified SS(MSS),which was used to prepare...A novel method was developed to enhance the utilization rate of steel slag(SS).Through treatment of SS with phosphoric acid and aminopropyl triethoxysilane(KH550),we obtained modified SS(MSS),which was used to prepare MSS/wood-plastic composites(MSS/WPCs)by replacing talcum powder(TP).The composites were fabricated through melting blending and hot pressing.Their mechanical and combustion properties,which comprise heat release,smoke release,and thermal stability,were systematically investigated.MSS can improve the mechanical strength of the composites through grafting reactions between wood powder and thermoplastics.Notably,MSS/WPC#50(16wt%MSS)with an MSS-to-TP mass ratio of 1:1 exhibited optimal comprehensive performance.Compared with those of WPC#0 without MSS,the tensile,flexural,and impact strengths of MSS/WPC#50 were increased by 18.5%,12.8%,and 18.0%,respectively.Moreover,the MSS/WPC#50 sample achieved the highest limited oxygen index of 22.5%,the highest vertical burning rating at the V-1 level,and the lowest horizontal burning rate at 44.2 mm/min.The formation of a dense and stable char layer led to improved thermal stability and a considerable reduction in heat and smoke releases of MSS/WPC#50.However,the partial replacement of TP with MSS slightly compromised the mechanical and flame-retardant properties,possibly due to the weak grafting caused by SS powder agglomeration.These findings suggest the suitability of MSS/WPCs for high-value-added applications as decorative panels indoors or outdoors.展开更多
Flame heating combined with water cooling was used to straighten A6N01 aluminum alloy welded joint and effect of flame heating pass on its microstructure and mechanical properties was studied. Results showed that the ...Flame heating combined with water cooling was used to straighten A6N01 aluminum alloy welded joint and effect of flame heating pass on its microstructure and mechanical properties was studied. Results showed that the flame induced the precipitation and growth of the Mg_2Si phase on the Al substrate for the thermal aging A6N01 aluminum alloy welded joints,thus it led the decrease of micro-hardness and tensile strength of the A6N01 aluminum alloy welded joint with the increase of the heating pass. However,the fatigue property of the flame heated joint was improved because the Mg_2Si precipitation hindered the initiation and propagation of the fatigue crack.展开更多
In the Tibet ancient buildings, there are large amounts of combustible decorative textiles that pose great potential fire hazards. Some typical textile samples were collected from the Potala Palace. Their combustion p...In the Tibet ancient buildings, there are large amounts of combustible decorative textiles that pose great potential fire hazards. Some typical textile samples were collected from the Potala Palace. Their combustion properties were analyzed by UL 94 Vertical Burning test and Limiting Oxygen Index test. The effects of plateau climate on combustion properties, an important fact required to be considered in the flame retarding design for combustible textiles, were preliminarily compared via test data in the plain and those in the plateau. Based on the foregoing analyses, some thoughts were presented on the clean and feasible flame retarding means for the decorative textiles due to their special applications in Tibet, in ancient buildings and in plateau climate. The fire resistance, weather resistance, UV resistance, endurance, ornamentation and religious performances for these textiles must be taken into considerations comprehensively in the designs.展开更多
The blend fibers of acrylonitrile-vinylidene chloride-sodium methallysulfonate copolymer(AN-VDC-SMAS) and cellulose acetate (CA) with various blend ratios were investigated bymeans of SEM, DDV, WAXD, etc. The results ...The blend fibers of acrylonitrile-vinylidene chloride-sodium methallysulfonate copolymer(AN-VDC-SMAS) and cellulose acetate (CA) with various blend ratios were investigated bymeans of SEM, DDV, WAXD, etc. The results show that AN-VDC-SMAS and CA areincompatibale; the numerous microvoids in the blend fiber resulted from the phase seperationcan remarkably improve the water absorbability and the dyeing behavior but hardly influencethe mechanical properties. On the other hand, the crystal structure of the continuous phaseAN-VDC-SMAS is not influnced by the dispersed phase CA.展开更多
In order to develop a fabric with excellent flame resistance function,antistatic function,moisture absorption and breathability,the polysulfonamide(PSA)fiber and the flame retardant viscose(FRV)fiber were blended.Mean...In order to develop a fabric with excellent flame resistance function,antistatic function,moisture absorption and breathability,the polysulfonamide(PSA)fiber and the flame retardant viscose(FRV)fiber were blended.Meanwhile,the conductive filaments were used as the core yarn,and then they were made into the core-spun yarn and the fabric at different blending ratios of PSA/FRV.The effects of the blending ratio of PSA/FRV on the mechanical properties and the evenness of the yarn were studied.The effects of the blending ratio of PSA/FRV on mechanical properties,flame retardant properties,antistatic properties,moisture permeability and drape of the fabric were analyzed.With the increase of the blending ratios of PSA/FRV,the strength and the elongation of the core-spun yarn increased firstly and then decreased.Moreover,the evenness of the core-spun yarn was improved,the fabric strength increased firstly and then decreased,the flame resistance decreased,and the antistatic performance improved.These results provide an important basis for the preparation and wide application of fabrics made of PSA/FRV/conductive filament.展开更多
基金financially supported from the National Natural Science Foundation of China(No.U23A20605)the University Synergy Innovation Program of Anhui Province,China(No.GXXT-2020-072)+2 种基金Anhui Jieqing Project,China(No.2208085J19)Anhui Graduate Innovation and Entrepreneurship Practice Project,China(No.2022cxcysj090)China Baowu Low Carbon Metallurgy Innovation Foundation(No.BWLCF202202).
文摘A novel method was developed to enhance the utilization rate of steel slag(SS).Through treatment of SS with phosphoric acid and aminopropyl triethoxysilane(KH550),we obtained modified SS(MSS),which was used to prepare MSS/wood-plastic composites(MSS/WPCs)by replacing talcum powder(TP).The composites were fabricated through melting blending and hot pressing.Their mechanical and combustion properties,which comprise heat release,smoke release,and thermal stability,were systematically investigated.MSS can improve the mechanical strength of the composites through grafting reactions between wood powder and thermoplastics.Notably,MSS/WPC#50(16wt%MSS)with an MSS-to-TP mass ratio of 1:1 exhibited optimal comprehensive performance.Compared with those of WPC#0 without MSS,the tensile,flexural,and impact strengths of MSS/WPC#50 were increased by 18.5%,12.8%,and 18.0%,respectively.Moreover,the MSS/WPC#50 sample achieved the highest limited oxygen index of 22.5%,the highest vertical burning rating at the V-1 level,and the lowest horizontal burning rate at 44.2 mm/min.The formation of a dense and stable char layer led to improved thermal stability and a considerable reduction in heat and smoke releases of MSS/WPC#50.However,the partial replacement of TP with MSS slightly compromised the mechanical and flame-retardant properties,possibly due to the weak grafting caused by SS powder agglomeration.These findings suggest the suitability of MSS/WPCs for high-value-added applications as decorative panels indoors or outdoors.
文摘Flame heating combined with water cooling was used to straighten A6N01 aluminum alloy welded joint and effect of flame heating pass on its microstructure and mechanical properties was studied. Results showed that the flame induced the precipitation and growth of the Mg_2Si phase on the Al substrate for the thermal aging A6N01 aluminum alloy welded joints,thus it led the decrease of micro-hardness and tensile strength of the A6N01 aluminum alloy welded joint with the increase of the heating pass. However,the fatigue property of the flame heated joint was improved because the Mg_2Si precipitation hindered the initiation and propagation of the fatigue crack.
文摘In the Tibet ancient buildings, there are large amounts of combustible decorative textiles that pose great potential fire hazards. Some typical textile samples were collected from the Potala Palace. Their combustion properties were analyzed by UL 94 Vertical Burning test and Limiting Oxygen Index test. The effects of plateau climate on combustion properties, an important fact required to be considered in the flame retarding design for combustible textiles, were preliminarily compared via test data in the plain and those in the plateau. Based on the foregoing analyses, some thoughts were presented on the clean and feasible flame retarding means for the decorative textiles due to their special applications in Tibet, in ancient buildings and in plateau climate. The fire resistance, weather resistance, UV resistance, endurance, ornamentation and religious performances for these textiles must be taken into considerations comprehensively in the designs.
文摘The blend fibers of acrylonitrile-vinylidene chloride-sodium methallysulfonate copolymer(AN-VDC-SMAS) and cellulose acetate (CA) with various blend ratios were investigated bymeans of SEM, DDV, WAXD, etc. The results show that AN-VDC-SMAS and CA areincompatibale; the numerous microvoids in the blend fiber resulted from the phase seperationcan remarkably improve the water absorbability and the dyeing behavior but hardly influencethe mechanical properties. On the other hand, the crystal structure of the continuous phaseAN-VDC-SMAS is not influnced by the dispersed phase CA.
基金Open Fund Project of Clothing Engineering Research Center of Zhejiang Province(Zhejiang Sci-Tech University,China)(No.2019FZKF04)Transformation of Scientific and Technological Achievements Programs of Higher Education Institutions in Shanxi Province,China(TSTAP)(No.2020CG014)+2 种基金the MOE(Ministry of Education in China)Project of Humanities and Social Sciences(No.18YJC760051)2017 Shanxi Philosophy and Social Science Project,China(No.201702)Program for the Philosophy and Social Sciences Research(PSSR)of Higher Learning Institutions of Shanxi Province,China(No.201803060)。
文摘In order to develop a fabric with excellent flame resistance function,antistatic function,moisture absorption and breathability,the polysulfonamide(PSA)fiber and the flame retardant viscose(FRV)fiber were blended.Meanwhile,the conductive filaments were used as the core yarn,and then they were made into the core-spun yarn and the fabric at different blending ratios of PSA/FRV.The effects of the blending ratio of PSA/FRV on the mechanical properties and the evenness of the yarn were studied.The effects of the blending ratio of PSA/FRV on mechanical properties,flame retardant properties,antistatic properties,moisture permeability and drape of the fabric were analyzed.With the increase of the blending ratios of PSA/FRV,the strength and the elongation of the core-spun yarn increased firstly and then decreased.Moreover,the evenness of the core-spun yarn was improved,the fabric strength increased firstly and then decreased,the flame resistance decreased,and the antistatic performance improved.These results provide an important basis for the preparation and wide application of fabrics made of PSA/FRV/conductive filament.
