Polyurethane/(vinyl ester resin) interpenetrating polymer network (PU/VER IPN) materials with broad temperatureranges and excellent damping properties from Iow temperature to room temperature were prepared. The influe...Polyurethane/(vinyl ester resin) interpenetrating polymer network (PU/VER IPN) materials with broad temperatureranges and excellent damping properties from Iow temperature to room temperature were prepared. The influenceof comonomers and component ratios on the compatibility and damping properties of IPN materials was studied byDMA which indicates that such properties are improved by introducing acrylic esters instead of polystyrene (PSt)into VER comonomer system. The detected results of microstructure by AFM show that the phase ranges of thedual-phase continuous IPN materials obtained are both in nanometer scale. The results of mechanical propertiesshow that IPN materials show the regulation from elastic deformation to brittle deformation with the increase of VERproportion.展开更多
Due to its mechanical properties and ease of use, vinyl ester resin is enjoying increasing consideration. This resin normally is produced by reaction between epoxy resin and unsaturated carboxylic acid. In the present...Due to its mechanical properties and ease of use, vinyl ester resin is enjoying increasing consideration. This resin normally is produced by reaction between epoxy resin and unsaturated carboxylic acid. In the present study, bis-phenol A based epoxy resin and methacrylic acid was used to produce vinyl ester resin. The reaction was conducted under both stoichiometric and non-stoichiometric conditions in the presence of triphenylphosphine as catalyst. The stoichiometric and non-stoichiometric experiments were conducted at 95, 100, 105 and 110℃ and at 90 and 95℃, respectively. The first order rate equation and mechanism based rate equation were examined. Parameters are evaluated by least square method. A comparison of mechanism based rate equation and experimental data show an excellent agreement. Finally, Arrhenius equation and activation energy were presented.展开更多
Quasi-static and high strain rate compressive experiments on vinyl ester casting were carried out by means of MTS (Material Test System) and Hopkinson bar. The behaviors of the compressed unstable and fracture of the ...Quasi-static and high strain rate compressive experiments on vinyl ester casting were carried out by means of MTS (Material Test System) and Hopkinson bar. The behaviors of the compressed unstable and fracture of the resin casting at different strain rates were investigated.The results indicate that the response behavior of the resin casting is controlled by different mechanisms at different strain rate, and some mechanical properties of vinyl ester casting are rate-dependent: the casting are destroyed in toughness model under strain rate 3.3×10 -4～6.6×10 -3/s, while the casting are destroyed in brittleness model under strain rate 950～5800/s. The yield stress, yield strain energy density are all increased with the increasing strain rates at quasi-static as well as at high strain rates. What is interesting is that the yield strain decreased with the strain rates increasing at quasi-static while increased at high strain rates. It is considered that the casting occurred forcing high elastic deformation at high strain rates. The damage of the specimens is mainly controlled by axial stress before unstable deformation, while mainly controlled by shear stress after unstable deformation, and then developed to fracture finally. This progress is rate-dependent: the development of the cracks inside the castings increased with the strain rate increasing.展开更多
Epoxy resin based Unsaturated poly(ester-amide) resins (UPEAs) can be prepared by many methods but here these were prepared by reported method [1]. These UPEAs were then treated with acrylotl chloride to afford acryla...Epoxy resin based Unsaturated poly(ester-amide) resins (UPEAs) can be prepared by many methods but here these were prepared by reported method [1]. These UPEAs were then treated with acrylotl chloride to afford acrylated UPEAs resin (i.e. AUPEAs). Interacting blends of equal proportional AUPEAs and vinyl ester epoxy (VE) resin were prepared. APEAs and AUPEAs were characterized by elemental analysis, molecular weight determined by vapour pressure osmometer and by IR spectral study and by thermogravimetry. The curing of interacting blends was monitored on differential scanning calorimeter (DSC). Based on DSC data in situ glass reinforced composites of the resultant blends have been prepared and characterized for mechanical, electrical and chemical properties. Unreinforced blends were characterized by thermogravimetry (TGA).展开更多
Vinyl ester (VE) resin inherently has intrinsic brittleness due to its high cross-link density. To improve mechanical performance, micro/nano fillers are widely used to modify this matrix. In present study, glass fibe...Vinyl ester (VE) resin inherently has intrinsic brittleness due to its high cross-link density. To improve mechanical performance, micro/nano fillers are widely used to modify this matrix. In present study, glass fiber in submicron scale at low contents was added into VE to prepare submicron composite (sMC). The impact resistance of un-notched sMC degraded with the increase of sGF content while that of notched-sMC remained the unchanged. Flexural properties of sMCs also were the same with that of neat resin. The results of Dynamic mechanical analysis (DMA) test showed the slight increase of storage modulus and the decrease of tan delta value in the case of sMC compared to those of un-filled matrix. However, the Mode I fracture toughness of sMC improved up to 26% and 61% corresponding to 0.3 and 0.6 wt% glass fiber used. The compact tension sample test suggests that there is the delay of crack propagation under tensile cyclic load in resin reinforced by submicron glass fiber. The number of failure cycle enlarged proportionally with the increment of sGF content in matrix.展开更多
Two-dimensional nanosheets are highly effective tougheners for vinyl ester resins.The toughening effect is related to the high specific surface area and unique two-dimensional planar structure of the nanosheets.In thi...Two-dimensional nanosheets are highly effective tougheners for vinyl ester resins.The toughening effect is related to the high specific surface area and unique two-dimensional planar structure of the nanosheets.In this study,a coupling agentγ-(2,3-epoxypropoxy)propytrimethoxysilane(Kh-560)was used to modify MXene nanosheets(M-MXene)for use in toughening vinyl ester resin.The mechanical properties,including the tensile strength,flexural strength,Young’s modulus and elongation,of neat vinyl ester resin and vinyl ester resin modified with MXene and M-MXene were investigated.The results showed that modification significantly improved the mechanical properties of the vinyl ester resin.The tensile and flexural strengths of the MXene-nanosheet-modified vinyl ester resin were 27.20%and 25.32%higher,respectively,than those of the neat vinyl ester resin.The coupling agent improved the interfacial compatibility between the MXene nanosheets and vinyl ester resin,which resulted in the tensile and flexural strengths of the M-MXene-nanosheet-modified vinyl ester resin being 52.57%and 54.60%higher,respectively,than those of the neat vinyl ester resin for a loading quantity of nanosheets of only 0.04 wt%,which is economically viable.The main mechanisms by which the nanosheets toughen the resin are crack deflection and crack pinning.展开更多
基金This work was supported by the Natural Science Foundation of Heilongjiang Province under the E00-17.
文摘Polyurethane/(vinyl ester resin) interpenetrating polymer network (PU/VER IPN) materials with broad temperatureranges and excellent damping properties from Iow temperature to room temperature were prepared. The influenceof comonomers and component ratios on the compatibility and damping properties of IPN materials was studied byDMA which indicates that such properties are improved by introducing acrylic esters instead of polystyrene (PSt)into VER comonomer system. The detected results of microstructure by AFM show that the phase ranges of thedual-phase continuous IPN materials obtained are both in nanometer scale. The results of mechanical propertiesshow that IPN materials show the regulation from elastic deformation to brittle deformation with the increase of VERproportion.
文摘Due to its mechanical properties and ease of use, vinyl ester resin is enjoying increasing consideration. This resin normally is produced by reaction between epoxy resin and unsaturated carboxylic acid. In the present study, bis-phenol A based epoxy resin and methacrylic acid was used to produce vinyl ester resin. The reaction was conducted under both stoichiometric and non-stoichiometric conditions in the presence of triphenylphosphine as catalyst. The stoichiometric and non-stoichiometric experiments were conducted at 95, 100, 105 and 110℃ and at 90 and 95℃, respectively. The first order rate equation and mechanism based rate equation were examined. Parameters are evaluated by least square method. A comparison of mechanism based rate equation and experimental data show an excellent agreement. Finally, Arrhenius equation and activation energy were presented.
文摘Quasi-static and high strain rate compressive experiments on vinyl ester casting were carried out by means of MTS (Material Test System) and Hopkinson bar. The behaviors of the compressed unstable and fracture of the resin casting at different strain rates were investigated.The results indicate that the response behavior of the resin casting is controlled by different mechanisms at different strain rate, and some mechanical properties of vinyl ester casting are rate-dependent: the casting are destroyed in toughness model under strain rate 3.3×10 -4～6.6×10 -3/s, while the casting are destroyed in brittleness model under strain rate 950～5800/s. The yield stress, yield strain energy density are all increased with the increasing strain rates at quasi-static as well as at high strain rates. What is interesting is that the yield strain decreased with the strain rates increasing at quasi-static while increased at high strain rates. It is considered that the casting occurred forcing high elastic deformation at high strain rates. The damage of the specimens is mainly controlled by axial stress before unstable deformation, while mainly controlled by shear stress after unstable deformation, and then developed to fracture finally. This progress is rate-dependent: the development of the cracks inside the castings increased with the strain rate increasing.
文摘Epoxy resin based Unsaturated poly(ester-amide) resins (UPEAs) can be prepared by many methods but here these were prepared by reported method [1]. These UPEAs were then treated with acrylotl chloride to afford acrylated UPEAs resin (i.e. AUPEAs). Interacting blends of equal proportional AUPEAs and vinyl ester epoxy (VE) resin were prepared. APEAs and AUPEAs were characterized by elemental analysis, molecular weight determined by vapour pressure osmometer and by IR spectral study and by thermogravimetry. The curing of interacting blends was monitored on differential scanning calorimeter (DSC). Based on DSC data in situ glass reinforced composites of the resultant blends have been prepared and characterized for mechanical, electrical and chemical properties. Unreinforced blends were characterized by thermogravimetry (TGA).
文摘Vinyl ester (VE) resin inherently has intrinsic brittleness due to its high cross-link density. To improve mechanical performance, micro/nano fillers are widely used to modify this matrix. In present study, glass fiber in submicron scale at low contents was added into VE to prepare submicron composite (sMC). The impact resistance of un-notched sMC degraded with the increase of sGF content while that of notched-sMC remained the unchanged. Flexural properties of sMCs also were the same with that of neat resin. The results of Dynamic mechanical analysis (DMA) test showed the slight increase of storage modulus and the decrease of tan delta value in the case of sMC compared to those of un-filled matrix. However, the Mode I fracture toughness of sMC improved up to 26% and 61% corresponding to 0.3 and 0.6 wt% glass fiber used. The compact tension sample test suggests that there is the delay of crack propagation under tensile cyclic load in resin reinforced by submicron glass fiber. The number of failure cycle enlarged proportionally with the increment of sGF content in matrix.
基金We gratefully acknowledge the fundings from the National Natural Science Foundation of China(Grant Nos.22022805,22078107)National Key Research and Development Program(Grant No.2021YFB3802500)+2 种基金the Special Project for Scienceand Technology Commissioner of Enterpriseof Guangdong Province(Grant No.GDKTP2021045700)the General Project of Department of Natural Resources of Guangdong Province(Grant No.GDNRC[2021]47)the Science&Technology Programof Qingyuan City(Grant No.2021DZX026).
文摘Two-dimensional nanosheets are highly effective tougheners for vinyl ester resins.The toughening effect is related to the high specific surface area and unique two-dimensional planar structure of the nanosheets.In this study,a coupling agentγ-(2,3-epoxypropoxy)propytrimethoxysilane(Kh-560)was used to modify MXene nanosheets(M-MXene)for use in toughening vinyl ester resin.The mechanical properties,including the tensile strength,flexural strength,Young’s modulus and elongation,of neat vinyl ester resin and vinyl ester resin modified with MXene and M-MXene were investigated.The results showed that modification significantly improved the mechanical properties of the vinyl ester resin.The tensile and flexural strengths of the MXene-nanosheet-modified vinyl ester resin were 27.20%and 25.32%higher,respectively,than those of the neat vinyl ester resin.The coupling agent improved the interfacial compatibility between the MXene nanosheets and vinyl ester resin,which resulted in the tensile and flexural strengths of the M-MXene-nanosheet-modified vinyl ester resin being 52.57%and 54.60%higher,respectively,than those of the neat vinyl ester resin for a loading quantity of nanosheets of only 0.04 wt%,which is economically viable.The main mechanisms by which the nanosheets toughen the resin are crack deflection and crack pinning.
