Structural Deformation Monitoring of Flight Vehicles Based on Optical Fiber Sensing Technology:A Review and Future Perspectives

Structural deformation monitoring of flight vehicles based on optical fiber sensing(OFS)technology has been a focus of research in the field of aerospace.After nearly 30 years of research and development,Chinese and international researchers have made significant advances in the areas of theory and methods,technology and systems,and ground experiments and flight tests.These advances have led to the development of OFS technology from the laboratory research stage to the engineering application stage.However,a few problems encountered in practical applications limit the wider application and further development of this technology,and thus urgently require solutions.This paper reviews the history of research on the deformation monitoring of flight vehicles.It examines various aspects of OFS-based deformation monitoring including the main varieties of OFS technology,technical advantages and disadvantages,suitability in aerospace applications,deformation reconstruction algorithms,and typical applications.This paper points out the key unresolved problems and the main evolution paradigms of engineering applications.It further discusses future development directions from the perspectives of an evolution paradigm,standardization,new materials,intelligentization,and collaboration.

Research on star-tracking correction technology for near-earth flight vehicles

By analyzing the traditional star-tracking correction technology,this paper studies the star-tracking direct correction method which is based on star sensor dynamic separation initial displacement angles and main errors of inertial measure unit（IMU） in order to carry out automatic navigation and improve the hitting accuracy and quick reaction capability of near-earth flight vehicles.Through comprehensive application and improvement of the best correction factor method,this paper proposes the startracking comprehensive correction method which combines the two methods above-mentioned and the accelerometer dynamic error separation technology.The simulation results show that obvious effects can be achieved by using the star-tracking integrated correction method.

Finite-time control of formation system for multiple flight vehicles subject to actuator saturation

This paper investigates the problem of formation tracking control for multiple flight vehicle(MFV) system considering actuator saturation constraints. First, the formation tracking control model is established. Then, the problem of formation control of the MFV system is converted to the convergence of a dynamical system, which is obtained by using the differential geometry theory.A class of saturation functions is introduced, and on this basis a second-order finite-time formation control protocol is developed.With the help of the homogeneous theory and Lasalle's invariance principle, it is theoretically proved that the designed formation protocol could complete the formation task in finite time, and the control inputs are shown to remain within their available actuating limits. Finally, simulations are performed to verify the effectiveness of the scheme.

Disturbance observer-based backstepping control for hypersonic flight vehicles without use of measured flight path angle

In this paper a nonlinear control method is proposed for the tracking control of hypersonic flight vehicles. The designed control laws do not utilize the measured flight path angle due to its inferior accuracy in practical engineering. For this, an estimated flight path angle is designed via the measurements of the altitude and velocity. A tracking differentiator is designed for constructing nonlinear disturbance observer which is used to estimate the model uncertainties including the parameter indeterminacies and external disturbances in the channels of velocity and pitch rate. A robust high-order differentiator is introduced to avoid the employment of the measured flight path angle and estimate the lumped disturbance in dynamics of flight path angle. Meanwhile, the possible saturation of the control inputs is considered and compensated by the auxiliary states. The boundness of closed-loop signals is proved through the Lyapunov theory. Comparative simulations are carried out and the results demonstrate the effectiveness of the proposed method.

Active Disturbance Rejection Controller Based Heading Control of Underwater Flight Vehicles

The total disturbance estimated by the extended state observer(ESO)in active disturbance rejection controller(ADRC)is affected greatly by measurement noise when the control step is small in heading control of underwater flight vehicles(UFVs).In order to prevent rudder from high-frequency chattering caused by measurement noise,a tracking-differentiator(TD)is integrated to the ESO to develop an improved ADRC scheme.The improved ADRC suppresses the impact of sensor noise.Both the results of simulations and tank tests show the effectiveness of improved ADRC based heading control.

Nonlinear direct data-driven control for UAV formation flight system

This paper proposes the nonlinear direct data-driven control from theoretical analysis and practical engineering,i.e.,unmanned aerial vehicle(UAV)formation flight system.Firstly,from the theoretical point of view,consider one nonlinear closedloop system with a nonlinear plant and nonlinear feed-forward controller simultaneously.To avoid the complex identification process for that nonlinear plant,a nonlinear direct data-driven control strategy is proposed to design that nonlinear feed-forward controller only through the input-output measured data sequence directly,whose detailed explicit forms are model inverse method and approximated analysis method.Secondly,from the practical point of view,after reviewing the UAV formation flight system,nonlinear direct data-driven control is applied in designing the formation controller,so that the followers can track the leader’s desired trajectory during one small time instant only through solving one data fitting problem.Since most natural phenomena have nonlinear properties,the direct method must be the better one.Corresponding system identification and control algorithms are required to be proposed for those nonlinear systems,and the direct nonlinear controller design is the purpose of this paper.

Flight Record of the Long March Series of Launch Vehicles

(Continued) The 75th Launch On December 30, 2003, the LM-2C/SM launch vehicle launched theTance 1 (TC-1) satellite into orbit from the Xichang Satellite Launch Center. The satellite entered a super geosynchronous orbit . Launch Site: Xichang Satellite Launch Center Launch Result: Success At 03:06 Beijing time on December 30, the LM-2C/SM launch vehicle lifted off into space with TC-1 (equatorial satellite) and precisely sent the satellite into

Flight Record of the Long March Series of Launch Vehicles

(Continued)The 71st Launch On October 15,2003,China's first manned spaceship,Shenzhou 5,was launched by a LM-2F launch vehicle.The first Chinese astronaut Yang Liwei stayed in space for 21 hours and landed back on the Earth safely on October 16。

Flight Record of the Long March Series of Launch Vehicles

(Continued)THE 67TH LAUNCHOn May 15, 2002, a LM-4B launch vehicle lifted off with FY-1D meteorological satellite and HY-1A oceanic satellite from Tai-yuan Satellite Launch Center and

Flight Record of the Long March Series of Launch Vehicles

(Continued) THE 59TH LAUNCH On November 20,1999,a LM-2F launch vehicle lifted off with China’s indigenous Shenzhou 1 experimental spaceship from Jiuquan Satellite Launch Center.Shenzhou 1 returned to Earth on November 21 after 21 hours of in-orbit operation and circling the Earth 14 times.

Flight Record of the Long March Series of Launch Vehicles

(Continued)THE 67TH LAUNCHOn May 15, 2002, a LM-4B launch vehicle lifted off with FY-1D meteorological satellite and HY-1A oceanic satellite from Tai-yuan Satellite Launch Center and

Flight Record of the Long March Series of Launch Vehicles

(Continued) The 79th Launch On September 9, 2004, a LM-4B launch vehicle launched two satellites, SJ-6A and SJ-6B, into space both for space environment exploration from the Taiyuan Satellite Launch Center. The two satellites entered their preset sun synchronous orbits. Launch Site: Taiyuan Satellite Launch Center Launch Result: Success At 07:14 Beijing time on September 9, the LM-4B launch vehicle was launched into space with SJ-6A and SJ-6B on board.

ADRC FRACTIONAL ORDER PID CONTROLLER DESIGN OF HYPERSONIC FLIGHT VEHICLE

Active disturbance rejection controller（ADRC）uses tracking-differentiator（TD）to solve the contradiction between the overshoot and the rapid nature.Fractional order proportion integral derivative（PID）controller improves the control quality and expands the stable region of the system parameters.ADRC fractional order（ADRFO）PID controller is designed by combining ADRC with the fractional order PID and applied to reentry attitude control of hypersonic vehicle.Simulation results show that ADRFO PID controller has better control effect and greater stable region for the strong nonlinear model of hypersonic flight vehicle under the influence of external disturbance,and has stronger robustness against the perturbation in system parameters.

A Potential Flow Based Flight Simulator for an Underwater Glider

Underwater gliders are recent innovative types of autonomous underwater vehicles （AUVs） used in ocean exploration and observation. They adjust their buoyancy to dive and to return to the ocean surface. During the change of altitude, they use the hydrodynamic forces developed by their wings to move forward. Their flights are controlled by changing the position of their centers of gravity and their buoyancy to adjust their trim and heel angles. For better flight control, the understanding of the hydrodynamic behavior and the flight mechanics of the underwater glider is necessary. A 6-DOF motion simulator is coupled with an unsteady potential flow model for this purpose. In some specific cases, the numerical study demonstrates that an inappropriate stabilizer dimension can cause counter-steering behavior. The simulator can be used to improve the automatic flight control. It can also be used for the hydrodynamic design optimization of the devices.

Primary safe criterion of earth-brushing flight for flying vehicle over digital surface model

In modern terrain-following guidance it is an important index for flight vehicle to cruise about safely and normally. On the basis of a constructing method of digital surface model (DSM), the definition, classification and scale analysis of an isolated obstacle threatening flight safety of terrain-following guidance are made. When the interval of vertical-and cross-sections on DSM is 12. 5 m, the proportion of isolated obstacles to the data amount of DSM model to be loaded is optimal. The main factors influencing the lowest flying height in terrain-following guidance are analyzed, and a primary safe criterion of the lowest flying height over DSM model is proposed. According to their test errors, the lowest flying height over 1:10 000 DSM model can reach 40. 5 m^45. 0 m in terrain-following guidance. It is shown from the simulation results of a typical urban district that the proposed models and methods are reasonable and feasible.

Adaptive Performance-Constrained Synchronization Control for Hypersonic Flight Vehicle Swarms: A Novel Finite-Time Convergence Protocol Methodology

This paper proposes a novel neural adaptive performance-constrained synchronization tracking control algorithm for multiple hypersonic flight vehicles(HFVs),which are subject to actuator faults and full-state constraints.The proposed method is based on advanced Lyapunov finite-time stability theory and a sophisticated backstepping design scheme.The longitudinal model of HFV is converted into velocity and altitude subsystems through functional decomposition.Our method presents three significant contributions over the existing state-of-the-art approaches:(a)ensuring finite-time convergence of HFVs systems by guaranteeing that the setting time is lower bounded by a positive constant that is related to the initial states;(b)utilizing a tan-type Barrier Lyapunov function(BLF)to ensure that the synchronization tracking errors of velocity,altitude,flight path angle,angle of attack,and pitch angle rate are maintained within certain performance bounds;and(c)designing a neural adaptive control algorithm and adaptive parameter laws by combining the backstepping design technique and radial basisfunction neural networks(RBFNNs)to handle unknown actuator faults and modeling uncer-tainties.Finally,comparative simulations are conducted to validate the efficacy of the proposed scheme.

Digital Simulation of Full Scale Static Test of Aircraft

Full scale aircraft static test is a very important process of aircraft design, it is costly and time consuming. The testing accuracy and validity mainly depend on the rationality of the test scheme design. When the aircraft is being tested, the specimen＇s safety mainly depends on monitoring and understanding the testing data by way of evaluating the coherence with the digital simulation data synchyononsly. The test digital simulation can aid realizing above requirements and improving the test efficiency significantly during test scheme design stage or testing stage respectively. The key technologies and the solving methods of test digital simulation are presented and the application example is given.

Reference tracking control for flexible air-breathing hypersonic vehicle with actuator delay and uncertainty

This paper considers the problem of reference tracking control for the flexible air-breathing hypersonic flight vehicle with actuator delay and uncertainty.By constructing the Lyapunov functional including the lower and upper bounds of the time-varying delay,the non-fragile controller is designed such that the resulting closed-loop system is asymptotically stable and satisfies a prescribed performance cost index.The simulation results are given to show the effectiveness of the proposed control method,which is validated by excellent output reference altitude and velocity tracking performance.

Neural Network Based Feedback Linearization Control of an Unmanned Aerial Vehicle

This paper presents a flight control design for an unmanned aerial vehicle （UAV） using a nonlinear autoregressive moving average （NARMA-L2） neural network based feedback linearization and output redefinition technique. The UAV investigated is non- minimum phase. The output redefinition technique is used in such a way that the resulting system to be inverted is a minimum phase system. The NARMA-L2 neural network is trained off-line for forward dynamics of the UAV model with redefined output and is then inverted to force the real output to approximately track a command input. Simulation results show that the proposed approaches have good performance.

System of systems oriented flight vehicle conceptual design: Perspectives and progresses

In order to obtain optimized flight vehicle concepts which meet system of systems （SOS） operation requirements, designers have to pay high attention to the impact of SoS at conceptual design stage since operation environment goes increasingly complex. Based on this tendency, per- spectives and progre,;ses of SoS oriented flight vehicle conceptual design, which is abbreviate as SoSed design, are reviewed in this paper. Such basic concepts of SoS as definition, characteristics, differences between systems engineering and SoS engineering, as well as SoSed design process are introduced, then SoS engineering process model for research and development of flight vehicles and SoSed design wheel model for conceptual design are proposed. Related literature is classified and analyzed in accordance with four major elements including requirements, design concept, design analysis, and trade studies and optimization： typical SoS architectures, description and quan- tization of indexes are introduced; Application of inverse design in designing concept is analyzed; Modeling and simulation （M＆S）-based methods and their applications in SoSed effectiveness evaluation are highlighted; According to SoSed trade studies and optimization related research, the importance of such points as decision-making and using multidisciplinary design optimization for reference are emphasized. Finally, the value of SoSed design is concluded, and five directions which are worthy of .attention in this field are presented.