Prediction of the Mooring Force of a 2-D Floating Oil Storage Tank

A Constrained Interpolation Profile （CIP）-based model is developed to predict the mooring force of a two-dimensional floating oil storage tank under wave conditions, which is validated against to a newly performed experiment. In the experiment, a box-shaped floating oil storage apparatus is used. Computations are performed by an improved CIP-based Cartesian grid model, in which the THINC/SW scheme （THINC： tangent of hyperbola for interface capturing; SW： Slope Weighting）, is used for interface capturing. A multiphase flow solver is adopted to treat the water-air-body interactions. The Immersed Boundary Method （IBM） is implemented to treat the body surface. Main attention is paid to the sum force of mooring line and velocity field around the body. It is found that the sum force of the mooring line increases with increasing wave amplitude. The body suffers from water wave impact and large body motions occur near the free surface. The vortex occurs near the sharp edge, i.e., the sharp bottom comers of the float- ing oil storage tank and the vortex shedding can be captured by the present numerical model. The present model could be further improved by including turbulence model which is currently under development. Comparison between the computational mooring forces and the measured mooring forces is presented with a reasonable agreement. The developed numerical model can predict the mooring line forces very well.

Floating zone growth and magnetic and specific heat properties of La0.67Ca0.33Mn1-xFexO3（x=0.00,0.04）single crystals

Single crystals of La0.67Ca0.33MnO3 and La0.67Ca0.33Mn0.96Fe0.04O3 were obtained by floating zone method. Laue diffraction pattern and rocking curve of the single crystals show that their quality is good. The magnetic behaviours of these compounds have been studied. Fe doping significantly depresses the magnetic contribution to the total specific heat Cp, but slightly influences the lattice contribution at temperatures above 50K. The peak of Cp shifts towards high temperatures with increasing magnetic field. Both single crystals exhibit the first-order magnetic transition around the Curie temperature.

我国产前诊断机构空间可及性与公平性

目的评价我国产前诊断机构的空间可及性与公平性,以期为优化此类机构的空间规划布局提供参考。方法用两步移动搜索法和空间基尼系数对我国产前诊断机构的空间可及性和公平性进行评价。结果我国中东部地区和各省(自治区、直辖市)中心城市产前诊断服务的空间可及性与公平性均优于西部地区和偏远地区。结论建议适当增加西部地区和偏远地区的产前诊断机构与卫生技术人员数量,以优化我国产前诊断机构的规划布局。

Crystal growth,structure and optical properties of Pr^(3+)-doped yttria-stabilized zirconia single crystals

The development of blue semiconductor light-emitting diodes(LEDs)has produced potential applications for Prdoped materials that can absorb blue light,especially crystals,and we now report structure and optical properties for high-quality Pr-doped single crystals of yttria-stabilized zirconia(YSZ)grown by the optical floating zone(FZ)method.X-ray diffraction(XRD)and Raman spectroscopy showed that all of the single crystal samples were in the cubic phase,whereas the corresponding ceramic samples contained a mixture of monoclinic and cubic phases.X-ray photoelectron spectroscopy(XPS)and electron paramagnetic resonance(EPR)spectroscopy showed that Pr was present as the Pr^(3+)ion in ceramic rods and single crystals after heating to high temperatures.The absorption and photoluminescence excitation(PLE)spectra of the Pr-doped YSZ crystals measured at room temperature showed strong absorption of blue light,while their photoluminescence(PL)spectra showed five emission peaks at 565 nm,588 nm,614 nm,638 nm,and 716 nm under450 nm excitation.The optimum luminescence properties were obtained with the crystal prepared using 0.15 mol%Pr_(6)O_(11),and those with higher concentrations showed evidence of quenching of the luminescence properties.In addition,the color purity of Pr-doped YSZ single crystal reached 98.9%in the orange–red region.

Crystal characterization and optical spectroscopy of Eu^(3+)-doped CaGdAlO_4 single crystal fabricated by the floating zone method

A highly transparent Eu3＋-doped CaGdA104 （CGA） single crystal is grown by the floating zone method. The segregation coefficient, x ray diffraction, and x ray rocking curve are detected, and the results reveal that the single crystal is of high quality. The f-f transitions of Eu3＋ in the host lattice are discussed. The 5D0-7F2 emis- sion transition at 621 nm （red light） is dominant over the 5D0-7F1 emission transitions at 591 and 599 nm （orange light）, agreeing well with the random crystal environment of Eu3＋ ions in a CGA crystal. The decay time of Eu：5D0 is measured to be 1.02 ms. All the results show that the Eu：CGA crystal has good optical char- acterization and promises to be an excellent red- fluorescence material.

Suitability Evaluation of Rural Settlements Based on Accessibility of Production and Living： A Case Study of Tingzu Town in Hubei Prov- ince of China

Rural settlements are the main carriers of agriculture, rural areas and farmers; thus, optimizing the production and living space of rural settlements is highly significant to rural development. Taking the effective allocation of resources as the starting point, a suitability evaluation system of rural settlements, based on accessibility of production and living, was proposed in this study to provide scientific basis for the optimization of production and living space. The accessibility of production and living was measured by an im- proved two-step floating catchment area method, which considered proximity and availability based on the inclination of rural residents. The suitability evaluation system consisted of traditional suitability evaluation and newly proposed limiting factor identification based on the loss score proportion of suitability. Tingzu Town of Hubei Province, China, was chosen as the case study area. Based on the re- suits of the suitability evaluation system, corresponding suggestions on rural land consolidation, industry division, as well as the layout of health care and education facilities were proposed to optimize the production and living space of rural settlements in Tingzu Town. It is found that the suitability evaluation based on accessibility of production and living is more scientific and accurate than the traditional ones which significantly overestimate production and living convenience. Moreover, the limiting factor identification can help us put forward suggestions according to local conditions and bring about the highly targeted optimization of production and living space of rural settlements.

Optical phonon behavior and magnetism of columbite Zn0.8Co0.2Nb2O6

Columbite Zn0.8Co0.2Nb2O6 crystals were grown by optical floating zone methods. The x-ray diffraction(XRD) was used to check the structure information of the grown Zn0.8Co0.2Nb2O6 crystal. The room temperature and temperature-dependent Raman spectra were tested to investigate the optical phonon behaviors of columbite Zn0.8Co0.2Nb2O6, which exhibited a temperature stable property. The magnetics properties of Zn0.8Co0.2Nb2O6, measured by a physical property measurement system(PPMS), were also presented in this work.

Evaluation and Promotion of the Service Capacity of Urban Public Open Spaces Based on Improving Accessibility:A Case Study of Shenyang City,China

The service capacity of urban public open spaces is an important indicator of the justness and soundness of the allocation of public space resources,such as parks and green spaces,in the process of urban development.Improving the service capacity of urban public open spaces is conductive to healthy,sustainable urban development.In this study,taking Shengyang City,China as a case study,a Gaussian-based two-step floating catchment area method(2 SFCA)is used to calculate an accessibility index and identify residential areas with a poor accessibility to urban public open spaces.Then,a particle swarm algorithm(PSA)is used to optimize the locations of new open space developments.Finally,the optimization results are verified using the analytic network process(ANP).The results show that the service capacity of public open spaces in the center of Shenyang City(covering six districts)is relatively low and exhibits an uneven spatial distribution.In the service scope of the existing urban public open spaces,the accessibility for 48.6%of the residential estates is moderately poor or poor.The layout is optimized when the number of optimization points is set to 8.These points are mainly located in old town areas such as the Tiexi,Huanggu,and Dadong districts.The optimization increases the green space area accessible by motor vehicles(60 min),bicycles(60 min),and walking(30 min)by 4.67%,5.38%,and 8.03%of the study area,respectively.Finally,green space planning recommendations are offered from two perspectives:spatial layout and transport system optimization.

输运溶剂浮区法生长Bi_(2+x)Sr_(2-x)Ca_(n-1)Cu_nO_(2n+4+d)晶体

The growth of crystals of the high T c oxide superconductors has been hampe red by the complexities of the materials and their phase diagrams.The most common crys tal growth technique adopted for these oxides is the “flux”method,where the st arting materials are solved in a melt,which is usually formed by excess CuO and BaO or a KCl/NaCl mixture.The crystals are produced by slow cooling of the heate d solvent.This method,however,suffers from several disadvantages: (1) the crystals are contaminated with the crucible material, (2) the crystals are difficult to remove from the crucible, (3) the crystals contain flux inclusions.

A review of dynamic analysis on space solar power station

The concept of a space solar power station(SSPS)was proposed in 1968 as a potential approach for solving the energy crisis.In the past 50 years,several structural concepts have been proposed,but none have been sent into orbit.One of the main challenges of the SSPS is dynamic behavior prediction,which can supply the necessary information for control strategy design.The ultra-large size of the SSPS causes difficulties in its dynamic analysis,such as the ultra-low vibration frequency and large fexibility.In this paper,four approaches for the numerical analysis of the dynamic problems associated with the SSPS are reviewed:the finite element,absolute nodal coordinate,foating frame formulation,and structure-preserving methods.Both the merits and shortcomings of the above four approaches are introduced when they are employed in dynamic problems associated with the SSPS.Synthesizing the merits of the aforementioned four approaches,we believe that embedding the structure-preserving method into finite element software may be an effective way to perform a numerical analysis of the dynamic problems associated with the SSPS.

White light luminescence in Dy/Tm co-doped yttria stabilized zirconia single crystals

A series of high quality Dy_(2)O_(3) and Tm_(2)O_(3)co-doped yttria stabilized zirconia(YSZ) single crystals was synthesized.These crystals have a single cubic structure,and exhibit the characteristic of Dy^(3+)(blue and yellow emissions) and Tm^(3+)(blue emission) under excitation with NUV light.Impo rtantly,the hue can be varied between blue and white by modifying the Tm^(3+)/Dy^(3+)ratio.The photoluminescence and decay curves are consistent with the existence of resonance-type energy transfer from Tm^(3+)to Dy^(3+)ions via an electric multipole interaction mechanism.Maximum luminescence intensity is observed in YSZ doped with 0.50 mol% Tm_(2)O_(3) and 0.75 mol% Dy_(2)O_(3),and this sample has CIE coordinates(x = 0.33,y = 0.33) in accordance with those for white chromaticity.Thus,the outstanding luminescence properties of these single crystals suggest potential applications in white light emission devices.