Chemical flooding is one of the effective technologies to increase oil recovery of petroleum reservoirs after water flooding.Above the scale of representative elementary volume(REV), phenomenological modeling and nume...Chemical flooding is one of the effective technologies to increase oil recovery of petroleum reservoirs after water flooding.Above the scale of representative elementary volume(REV), phenomenological modeling and numerical simulations of chemical flooding have been reported in literatures,but the studies alike are rarely conducted at the pore-scale,at which the effects of physicochemical hydrodynamics are hardly resolved either by experimental observations or by traditional continuum-based simulations.In this paper,dissipative particle dynamics(DPD),one of mesoscopic fluid particle methods,is introduced to simulate the pore-scale flow in chemical flooding processes.The theoretical background,mathematical formulation and numerical approach of DPD are presented.The plane Poiseuille flow is used to illustrate the accuracy of the DPD simulation,and then the processes of polymer flooding through an oil-wet throat and a water-wet throat are studies, respectively.The selected parameters of those simulations are given in details.These preliminary results show the potential of this novel method for modeling the physicochemical hydrodynamics at the pore scale in the area of chemical enhanced oil recovery.展开更多
The penetration of water during water flooding has been observed over many years using several methods. A microfocused X-ray computed tomography scanner can be used to directly observe 3D water flooding in a nondestru...The penetration of water during water flooding has been observed over many years using several methods. A microfocused X-ray computed tomography scanner can be used to directly observe 3D water flooding in a nondestructive manner. To eliminate the possibility of false images being produced because of X-ray broadening effects, we developed a visualization method by arranging the brightness distribution of all phases involved. Water flooding experiments were conducted using oil-wet and water-wet porous media. The water phase was injected upward into packed glass beads containing an oil phase, and the process was scanned every minute until steady state was reached. Using this scheme, real-time, the water invasion pattern and oil trapping process in clusters of pores and individual pores can be observed clearly. By eliminating false images, the boundary of each phase could be identified with high precision, even in a single pore. Porelevel phenomena, including snap off (which has never before been captured in a real 3D porous medium), piston-like displacement, and the curvature of the interface, were also observed. Direct measurement of the pore throat radius and the contact angle between the wetting and nonwetting phases gave an approximation of the capillary pressure during the piston-like displacement and snap-off processes.展开更多
Flood catastrophe risk assessment is imperative for the steady development of agriculture under the context of global climate change,and meanwhile,it is an urgent scientific issue need to be solved in agricultural ris...Flood catastrophe risk assessment is imperative for the steady development of agriculture under the context of global climate change,and meanwhile,it is an urgent scientific issue need to be solved in agricultural risk assessment discipline.This paper developed the methodology of flood catastrophe risk assessment,which can be shown as the standard process of crop loss calculation,Monte Carlo simulation,the generalized extreme value distribution（GEV） fitting,and risk evaluation.Data on crop loss were collected based on hectares covered by natural disasters,hectares affected by natural disasters,and hectares destroyed by natural disasters using the standard equation.Monte Carlo simulation based on appropriate distribution was used to expand sample size to overcome the insufficiency of crop loss data.Block maxima model（BMM） approach based on the extreme value theory was for modeling the generalized extreme value distribution（GEV） of flood catastrophe loss,and then flood catastrophe risk at the provincial scale in China was calculated.The Type III Extreme distribution（Weibull） has a weighted advantage of modeling flood catastrophe risk for grain production.The impact of flood catastrophe to grain production in China was significantly serious,and high or very high risk of flood catastrophe mainly concentrates on the central and eastern regions of China.Given the scenario of suffering once-in-a-century flood disaster,for majority of the major-producing provinces,the probability of 10% reduction of grain output is more than 90%.Especially,the probabilities of more than 15% decline in grain production reach up to 99.99,99.86,99.69,and 91.60% respectively in Anhui,Jilin,Liaoning,and Heilongjiang.Flood catastrophe assessment can provide multifaceted information about flood catastrophe risk that can help to guide management of flood catastrophe.展开更多
本文详细阐述了渗流力学经典理论——达西定律的发展历程及其适用条件,并从Navier-Stokes(N-S)方程推导出了达西定律在多孔介质中的毛细管渗流和裂缝渗流中的数学表达式。文章指出了当前达西定律应用中存在的8大问题,并综合分析了渗流...本文详细阐述了渗流力学经典理论——达西定律的发展历程及其适用条件,并从Navier-Stokes(N-S)方程推导出了达西定律在多孔介质中的毛细管渗流和裂缝渗流中的数学表达式。文章指出了当前达西定律应用中存在的8大问题,并综合分析了渗流力学理论在油气田开发中的主要挑战。针对这些挑战,本文提出了一系列对策和思考。文章强调指出:构建多尺度、多物理场耦合模型并借助AI科学计算是揭示油气储层复杂真实流动机制,填补目前理论空白的必由之路。建议指出:进一步发展核磁共振、电镜扫描及智能数据与图像处理等高精度实验技术,以直观展现流体在储层中的流动行为和过程。最后,建议综合运用实验研究、新理论模型建立和AI科学研究方法(AI for Science),突破油气渗流力学理论中目前遇到的挑战。研究成果可为我国高校、科研机构和研究者开展石油科学理论研究和课题立项提供重要参考,同时可为我国油气资源可持续进行科学和技术战略规划提供强有力的技术支撑。展开更多
By combining the results of prototype observation of flood discharge atomization at the Wujiangdu Hydropower Station, and by adopting the serial model test method, the model scale effect was examined, the influences o...By combining the results of prototype observation of flood discharge atomization at the Wujiangdu Hydropower Station, and by adopting the serial model test method, the model scale effect was examined, the influences of the Reynolds and Weber numbers of water flow on the rain intensity of flood discharge atomization were analyzed and a rain intensity conversion relation was established. It is demonstrated that the level of atomization follows the geometric similarity relations and it is possible to ignore the influence of the surface tension of the flow when the Weber number is greater than 500. Despite limitations such as incomplete data sets, it is undoubtedly helpful to study the scale effect of atomization flow, and it is beneficial to identify the rules of the model test results in order to extrapolate to prototype prediction.展开更多
Although existing hydraulic models have been used to simulate and predict urban flooding, most of these models are inadequate due to the high spatial resolution required to simulate flows in urban floodplains. Nesting...Although existing hydraulic models have been used to simulate and predict urban flooding, most of these models are inadequate due to the high spatial resolution required to simulate flows in urban floodplains. Nesting high-resolution subdomains within coarser-resolution models is an efficient solution for enabling simultaneous calculation of flooding due to tides, surges, and high river flows. MSN_Flood has been developed to incorporate moving boundaries around nested domains, permitting alternate flooding and drying along the boundary and in the interior of the domain. Ghost cells adjacent to open boundary cells convert open boundaries, in effect, into internal boundaries. The moving boundary may be multi-segmented and non-continuous, with recirculating flow across the boundary. When combined with a bespoke adaptive interpolation scheme, this approach facilitates a dynamic internal boundary. Based on an alternating-direction semi-implicit finite difference scheme,MSN_Flood was used to hindcast a major flood event in Cork City resulting from the combined pressures of fluvial, tidal, and storm surge processes. The results show that the model is computationally efficient, as the 2-m high-resolution nest is used only in the urban flooded region.Elsewhere, lower-resolution nests are used. The results also show that the model is highly accurate when compared with measured data. The model is capable of incorporating nested sub-domains when the nested boundary is multi-segmented and highly complex with lateral gradients of elevation and velocities. This is a major benefit when modelling urban floodplains at very high resolution.展开更多
Fluvial processes comprise water flow,sediment transport and bed evolution,which normally feature distinct time scales.The time scales of sediment transport and bed deformation relative to the flow essentially measure...Fluvial processes comprise water flow,sediment transport and bed evolution,which normally feature distinct time scales.The time scales of sediment transport and bed deformation relative to the flow essentially measure how fast sediment transport adapts to capacity region in line with local flow scenario and the bed deforms in comparison with the flow,which literally dictates if a capacity based and/or decoupled model is justified.This paper synthesizes the recently developed multiscale theory for sediment-laden flows over erodible bed,with bed load and suspended load transport,respectively.It is unravelled that bed load transport can adapt to capacity sufficiently rapidly even under highly unsteady flows and thus a capacity model is mostly applicable,whereas a non-capacity model is critical for suspended sediment because of the lower rate of adaptation to capacity.Physically coupled modelling is critical for fluvial processes characterized by rapid bed variation.Applications are outlined on very active bed load sediment transported by flash floods and landslide dam break floods.展开更多
基金supported by the National Basic Research Program of China(2005CB221307 & 2005CB221304)China Postdoctoral Science Foundation(20090460391 & 201003138)PetroChina RIPED Innovations Foundation.
文摘Chemical flooding is one of the effective technologies to increase oil recovery of petroleum reservoirs after water flooding.Above the scale of representative elementary volume(REV), phenomenological modeling and numerical simulations of chemical flooding have been reported in literatures,but the studies alike are rarely conducted at the pore-scale,at which the effects of physicochemical hydrodynamics are hardly resolved either by experimental observations or by traditional continuum-based simulations.In this paper,dissipative particle dynamics(DPD),one of mesoscopic fluid particle methods,is introduced to simulate the pore-scale flow in chemical flooding processes.The theoretical background,mathematical formulation and numerical approach of DPD are presented.The plane Poiseuille flow is used to illustrate the accuracy of the DPD simulation,and then the processes of polymer flooding through an oil-wet throat and a water-wet throat are studies, respectively.The selected parameters of those simulations are given in details.These preliminary results show the potential of this novel method for modeling the physicochemical hydrodynamics at the pore scale in the area of chemical enhanced oil recovery.
文摘The penetration of water during water flooding has been observed over many years using several methods. A microfocused X-ray computed tomography scanner can be used to directly observe 3D water flooding in a nondestructive manner. To eliminate the possibility of false images being produced because of X-ray broadening effects, we developed a visualization method by arranging the brightness distribution of all phases involved. Water flooding experiments were conducted using oil-wet and water-wet porous media. The water phase was injected upward into packed glass beads containing an oil phase, and the process was scanned every minute until steady state was reached. Using this scheme, real-time, the water invasion pattern and oil trapping process in clusters of pores and individual pores can be observed clearly. By eliminating false images, the boundary of each phase could be identified with high precision, even in a single pore. Porelevel phenomena, including snap off (which has never before been captured in a real 3D porous medium), piston-like displacement, and the curvature of the interface, were also observed. Direct measurement of the pore throat radius and the contact angle between the wetting and nonwetting phases gave an approximation of the capillary pressure during the piston-like displacement and snap-off processes.
基金jointly funded by the National Natural Science Foundation of China(41201551)the Key Technology R&D Program of China(2012BAH20B04-2)
文摘Flood catastrophe risk assessment is imperative for the steady development of agriculture under the context of global climate change,and meanwhile,it is an urgent scientific issue need to be solved in agricultural risk assessment discipline.This paper developed the methodology of flood catastrophe risk assessment,which can be shown as the standard process of crop loss calculation,Monte Carlo simulation,the generalized extreme value distribution（GEV） fitting,and risk evaluation.Data on crop loss were collected based on hectares covered by natural disasters,hectares affected by natural disasters,and hectares destroyed by natural disasters using the standard equation.Monte Carlo simulation based on appropriate distribution was used to expand sample size to overcome the insufficiency of crop loss data.Block maxima model（BMM） approach based on the extreme value theory was for modeling the generalized extreme value distribution（GEV） of flood catastrophe loss,and then flood catastrophe risk at the provincial scale in China was calculated.The Type III Extreme distribution（Weibull） has a weighted advantage of modeling flood catastrophe risk for grain production.The impact of flood catastrophe to grain production in China was significantly serious,and high or very high risk of flood catastrophe mainly concentrates on the central and eastern regions of China.Given the scenario of suffering once-in-a-century flood disaster,for majority of the major-producing provinces,the probability of 10% reduction of grain output is more than 90%.Especially,the probabilities of more than 15% decline in grain production reach up to 99.99,99.86,99.69,and 91.60% respectively in Anhui,Jilin,Liaoning,and Heilongjiang.Flood catastrophe assessment can provide multifaceted information about flood catastrophe risk that can help to guide management of flood catastrophe.
文摘本文详细阐述了渗流力学经典理论——达西定律的发展历程及其适用条件,并从Navier-Stokes(N-S)方程推导出了达西定律在多孔介质中的毛细管渗流和裂缝渗流中的数学表达式。文章指出了当前达西定律应用中存在的8大问题,并综合分析了渗流力学理论在油气田开发中的主要挑战。针对这些挑战,本文提出了一系列对策和思考。文章强调指出:构建多尺度、多物理场耦合模型并借助AI科学计算是揭示油气储层复杂真实流动机制,填补目前理论空白的必由之路。建议指出:进一步发展核磁共振、电镜扫描及智能数据与图像处理等高精度实验技术,以直观展现流体在储层中的流动行为和过程。最后,建议综合运用实验研究、新理论模型建立和AI科学研究方法(AI for Science),突破油气渗流力学理论中目前遇到的挑战。研究成果可为我国高校、科研机构和研究者开展石油科学理论研究和课题立项提供重要参考,同时可为我国油气资源可持续进行科学和技术战略规划提供强有力的技术支撑。
基金supported by the National Natural Science Foundation of China (Grant No 50579084)the Foundation of the Nanjing Hydraulic Research Institute (Grant No Y10705)
文摘By combining the results of prototype observation of flood discharge atomization at the Wujiangdu Hydropower Station, and by adopting the serial model test method, the model scale effect was examined, the influences of the Reynolds and Weber numbers of water flow on the rain intensity of flood discharge atomization were analyzed and a rain intensity conversion relation was established. It is demonstrated that the level of atomization follows the geometric similarity relations and it is possible to ignore the influence of the surface tension of the flow when the Weber number is greater than 500. Despite limitations such as incomplete data sets, it is undoubtedly helpful to study the scale effect of atomization flow, and it is beneficial to identify the rules of the model test results in order to extrapolate to prototype prediction.
文摘Although existing hydraulic models have been used to simulate and predict urban flooding, most of these models are inadequate due to the high spatial resolution required to simulate flows in urban floodplains. Nesting high-resolution subdomains within coarser-resolution models is an efficient solution for enabling simultaneous calculation of flooding due to tides, surges, and high river flows. MSN_Flood has been developed to incorporate moving boundaries around nested domains, permitting alternate flooding and drying along the boundary and in the interior of the domain. Ghost cells adjacent to open boundary cells convert open boundaries, in effect, into internal boundaries. The moving boundary may be multi-segmented and non-continuous, with recirculating flow across the boundary. When combined with a bespoke adaptive interpolation scheme, this approach facilitates a dynamic internal boundary. Based on an alternating-direction semi-implicit finite difference scheme,MSN_Flood was used to hindcast a major flood event in Cork City resulting from the combined pressures of fluvial, tidal, and storm surge processes. The results show that the model is computationally efficient, as the 2-m high-resolution nest is used only in the urban flooded region.Elsewhere, lower-resolution nests are used. The results also show that the model is highly accurate when compared with measured data. The model is capable of incorporating nested sub-domains when the nested boundary is multi-segmented and highly complex with lateral gradients of elevation and velocities. This is a major benefit when modelling urban floodplains at very high resolution.
基金supported by the National Natural Science Foundation of China (10932012 and 10972164)State Key Basic Research and Development Program (973) of China (2007CB714106)
文摘Fluvial processes comprise water flow,sediment transport and bed evolution,which normally feature distinct time scales.The time scales of sediment transport and bed deformation relative to the flow essentially measure how fast sediment transport adapts to capacity region in line with local flow scenario and the bed deforms in comparison with the flow,which literally dictates if a capacity based and/or decoupled model is justified.This paper synthesizes the recently developed multiscale theory for sediment-laden flows over erodible bed,with bed load and suspended load transport,respectively.It is unravelled that bed load transport can adapt to capacity sufficiently rapidly even under highly unsteady flows and thus a capacity model is mostly applicable,whereas a non-capacity model is critical for suspended sediment because of the lower rate of adaptation to capacity.Physically coupled modelling is critical for fluvial processes characterized by rapid bed variation.Applications are outlined on very active bed load sediment transported by flash floods and landslide dam break floods.
