Based on the fact that the house dust usually falls on the ground, the floor level slit exhaust ventilation system including inlet located at the ceiling and outlet of slit exhaust installed at comer between wall and ...Based on the fact that the house dust usually falls on the ground, the floor level slit exhaust ventilation system including inlet located at the ceiling and outlet of slit exhaust installed at comer between wall and floor was considered. Experiments and simulations were performed to investigate the flow and diffusion fields that are affected by this floor level slit exhaust ventilation system. The characteristics of airflow with experiments and computation fluid dynamics （CFD） are generally similar except airflow at the location of impinging flow and the location right below the inlet. Riboflavin particles were used as the house dust. For the spatial distribution of riboflavin particles in the ventilation system before operation, due to the influence of gravity, different sizes of particles show smooth decay curve. After floor level slit exhaust ventilation system is operated, the decay rate of the particles becomes faster than that after the ventilation system is powered on, and the particles with diameter of 0.5-3.0 μm in the experimental data and calculated values show good agreement.展开更多
Background: Quantitative biomechanical characterization of pelvic supportive structures and functions in vivo is thought to provide insight into pathophysiology of pelvic organ prolapse (POP). An innovative approach—...Background: Quantitative biomechanical characterization of pelvic supportive structures and functions in vivo is thought to provide insight into pathophysiology of pelvic organ prolapse (POP). An innovative approach—vaginal tactile imaging—allows biomechanical mapping of the female pelvic floor to quantify tissue elasticity, pelvic support, and pelvic muscle functions. The Vaginal Tactile Imager (VTI) records high definition pressure patterns from vaginal walls under an applied tissue deformation and during pelvic floor muscle contractions. Objective: To explore an extended set of 52 biomechanical parameters for differentiation and characterization of POP relative to normal pelvic floor conditions. Methods: 96 subjects with normal and POP conditions were included in the data analysis from multi-site observational, case-controlled studies;42 subjects had normal pelvic floor conditions and 54 subjects had POP. The VTI, model 2S, was used with an analytical software package to calculate automatically 52 biomechanical parameters for 8 VTI test procedures (probe insertion, elevation, rotation, Valsalva maneuver, voluntary muscle contractions in 2 planes, relaxation, and reflex contraction). The groups were equalized for subject age and parity. Results: The ranges, mean values, and standard deviations for all 52 VTI parameters were established. 33 of 52 parameters were identified as statistically sensitive (p 0.05;t-test) to the POP development. Among these 33 parameters, 11 parameters show changes (decrease) in tissue elasticity, 8 parameters show deteriorations in pelvic support and 14 parameters show weakness in muscle functions for POP versus normal conditions. Conclusions: The biomechanical mapping of the female pelvic floor with the VTI provides a unique set of parameters characterizing POP versus normal conditions. These objectively measurable biomechanical transformations of pelvic tissues, support structures, and functions under POP may be used in future research and practical applications.展开更多
A study was conducted in central Ethiopian highland in 2008 to investigate the consumption of house construction wood, the tree species preference for construction wood and the forthcoming conditions of this forest pr...A study was conducted in central Ethiopian highland in 2008 to investigate the consumption of house construction wood, the tree species preference for construction wood and the forthcoming conditions of this forest product and possible strategies for future availability. Twenty-four iron-roofed houses and twenty-eight thatch-roofed houses belonging to thirty-six farm households were investigated for types, volumes and sources of construction wood used. It was found that an average farmhouse with a floor space of 57 m^2 consumed about 13.7 m^3 of wood. Both floor space and wood consumptions vary with house types An average iron-roofed house with floor space of 51.9 m^2 consumed 16.8 m^3 of wood and an average thatch-roofed house with mean floor space of 28.6 m^2 consumed 3.2 m^3 of wood. Family size and floor space were the major factors influencing construction wood consumption. An average living house was composed of woods of 39.3% ,luniperus procera, 5.6% Cupressus lusitanica, 29.2% Eucalyptus globulus and 26% Eucalyptus camaldulensis. The wood volume from the first two species and half that of the third species were obtained from state forest which is currently banned from any construction wood extraction and hence there is a shortage of around 59.5% of woods. We suggest the promotion of various tree planting approaches to increase the wood supply and the use of alternative local materials like soil bricks for house construction.展开更多
Two practical crawlspace heating systems introduced in detached houses have been chosen as a field study. One is the crawlspace warm air heating system and the other is the crawlspace hot water circulation system. Bas...Two practical crawlspace heating systems introduced in detached houses have been chosen as a field study. One is the crawlspace warm air heating system and the other is the crawlspace hot water circulation system. Based on the field study result, by using the simulation sol, ware, THERB, the effectiveness of the crawlspace warm air heating system has been examined. The effect of the factors, such as the wind amount circulating between crawlspace and indoor space, foundation insulation condition, and heat amount into the crawlspace, on the indoor thermal environment has been analyzed. Based on these analyses, the measured crawlspace heating system can make the average temperature of the living room above 20℃. These two houses have excellent thermal environment. According to the simulating result, heat amount input into crawlspace, which can make comfortable indoor thermal environment, for every month in heating period has been roughly concluded, and they are 600 W in December and March and 800 W in February and January, respectively.展开更多
The hygienic threshold limit values for ammonia （25 ppm） for animal welfare but also for occupational safety and health is often exceeded in floor housing systems for laying hens with long time storage of manure in ...The hygienic threshold limit values for ammonia （25 ppm） for animal welfare but also for occupational safety and health is often exceeded in floor housing systems for laying hens with long time storage of manure in bins below draining floors. The major reason for high ammonia concentrations is the large amounts of stored and exposed manure. The possibility to reduce ammonia release by reducing the amount of stored manure in bins in floor housing systems for laying hens has therefore been investigated. Investigations were carried out in a climate chamber equipped with a floor housing system with a manure removal system with two parallel motor driven conveyors placed below an elevated draining floor. The conditions when manure is stored in bins below draining floors were simulated by storing manure on the conveyors for several days at constant ventilation rates and temperatures. The investigations clearly showed that storage of manure in the bin caused a rapid increase in ammonia concentrations. After about 7 days storage of manure in the bin the ammonia concentration exceeded the hygienic threshold limit values. It can be concluded that long time storage of manure in storage bins below draining floors should not be recommended. It was possible to maintain the ammonia concentration below the hygienic threshold limit values when manure was removed frequently with conveyors. Floor housing systems for laying hens with elevated draining floors should therefore be equipped with manure removal systems that enable frequent removal of manure in the bins.展开更多
Housing in the private sector in the metropolitan of Tehran in the past decades has been very much tied to the economical considerations, The current urban and building standards and regulations are believed to have v...Housing in the private sector in the metropolitan of Tehran in the past decades has been very much tied to the economical considerations, The current urban and building standards and regulations are believed to have very much contributed to the undermining the many social, environmental and visual potentials of the neighborhoods and to what we face today as congested apartment atmosphere where and the monotonous character of most of the neighborhoods as a result of the very same plans and regulations applied to their development namely the setbacks, land coverage ratios and floor to land area ratios with no regard to the very different characters many of these neighborhoods once had, either traditional and long-established or scenic and natural. The purpose of this paper is to briefly review the current state and trend of urban housing in Tehran and search for practical measures to improve the environment and character of urban housing in the city.展开更多
基金Project supported by Ministry of Land, Infrastructure, Transport and Tourism of Japan Project(DUT10RC(3)103) supported by the Fundamental Research Funds for the Central Universities in China+2 种基金 Project(20111027) supported by the Liaoning Provincial Scientific Research Foundation, China Key Project (2012BAJ02B05) supported by the Twelfth Five-Year National Technology Program of China Project supported by Dalian Municipal Construction Technology Program, China
文摘Based on the fact that the house dust usually falls on the ground, the floor level slit exhaust ventilation system including inlet located at the ceiling and outlet of slit exhaust installed at comer between wall and floor was considered. Experiments and simulations were performed to investigate the flow and diffusion fields that are affected by this floor level slit exhaust ventilation system. The characteristics of airflow with experiments and computation fluid dynamics （CFD） are generally similar except airflow at the location of impinging flow and the location right below the inlet. Riboflavin particles were used as the house dust. For the spatial distribution of riboflavin particles in the ventilation system before operation, due to the influence of gravity, different sizes of particles show smooth decay curve. After floor level slit exhaust ventilation system is operated, the decay rate of the particles becomes faster than that after the ventilation system is powered on, and the particles with diameter of 0.5-3.0 μm in the experimental data and calculated values show good agreement.
文摘Background: Quantitative biomechanical characterization of pelvic supportive structures and functions in vivo is thought to provide insight into pathophysiology of pelvic organ prolapse (POP). An innovative approach—vaginal tactile imaging—allows biomechanical mapping of the female pelvic floor to quantify tissue elasticity, pelvic support, and pelvic muscle functions. The Vaginal Tactile Imager (VTI) records high definition pressure patterns from vaginal walls under an applied tissue deformation and during pelvic floor muscle contractions. Objective: To explore an extended set of 52 biomechanical parameters for differentiation and characterization of POP relative to normal pelvic floor conditions. Methods: 96 subjects with normal and POP conditions were included in the data analysis from multi-site observational, case-controlled studies;42 subjects had normal pelvic floor conditions and 54 subjects had POP. The VTI, model 2S, was used with an analytical software package to calculate automatically 52 biomechanical parameters for 8 VTI test procedures (probe insertion, elevation, rotation, Valsalva maneuver, voluntary muscle contractions in 2 planes, relaxation, and reflex contraction). The groups were equalized for subject age and parity. Results: The ranges, mean values, and standard deviations for all 52 VTI parameters were established. 33 of 52 parameters were identified as statistically sensitive (p 0.05;t-test) to the POP development. Among these 33 parameters, 11 parameters show changes (decrease) in tissue elasticity, 8 parameters show deteriorations in pelvic support and 14 parameters show weakness in muscle functions for POP versus normal conditions. Conclusions: The biomechanical mapping of the female pelvic floor with the VTI provides a unique set of parameters characterizing POP versus normal conditions. These objectively measurable biomechanical transformations of pelvic tissues, support structures, and functions under POP may be used in future research and practical applications.
基金the Austrian Exchange Service for financially supporting this study as part of the academic thesis of the first author
文摘A study was conducted in central Ethiopian highland in 2008 to investigate the consumption of house construction wood, the tree species preference for construction wood and the forthcoming conditions of this forest product and possible strategies for future availability. Twenty-four iron-roofed houses and twenty-eight thatch-roofed houses belonging to thirty-six farm households were investigated for types, volumes and sources of construction wood used. It was found that an average farmhouse with a floor space of 57 m^2 consumed about 13.7 m^3 of wood. Both floor space and wood consumptions vary with house types An average iron-roofed house with floor space of 51.9 m^2 consumed 16.8 m^3 of wood and an average thatch-roofed house with mean floor space of 28.6 m^2 consumed 3.2 m^3 of wood. Family size and floor space were the major factors influencing construction wood consumption. An average living house was composed of woods of 39.3% ,luniperus procera, 5.6% Cupressus lusitanica, 29.2% Eucalyptus globulus and 26% Eucalyptus camaldulensis. The wood volume from the first two species and half that of the third species were obtained from state forest which is currently banned from any construction wood extraction and hence there is a shortage of around 59.5% of woods. We suggest the promotion of various tree planting approaches to increase the wood supply and the use of alternative local materials like soil bricks for house construction.
基金Project(10YZ156) supported by Innovation Program of Shanghai Municipal Education Commission, China Project(sdl09009) supported by Training Program for Outstanding Youth Teacher of Shanghai Municipal Education Commission, China Project(Z2010-103) supported by Shanghai Education Development Foundation, China
文摘Two practical crawlspace heating systems introduced in detached houses have been chosen as a field study. One is the crawlspace warm air heating system and the other is the crawlspace hot water circulation system. Based on the field study result, by using the simulation sol, ware, THERB, the effectiveness of the crawlspace warm air heating system has been examined. The effect of the factors, such as the wind amount circulating between crawlspace and indoor space, foundation insulation condition, and heat amount into the crawlspace, on the indoor thermal environment has been analyzed. Based on these analyses, the measured crawlspace heating system can make the average temperature of the living room above 20℃. These two houses have excellent thermal environment. According to the simulating result, heat amount input into crawlspace, which can make comfortable indoor thermal environment, for every month in heating period has been roughly concluded, and they are 600 W in December and March and 800 W in February and January, respectively.
文摘The hygienic threshold limit values for ammonia （25 ppm） for animal welfare but also for occupational safety and health is often exceeded in floor housing systems for laying hens with long time storage of manure in bins below draining floors. The major reason for high ammonia concentrations is the large amounts of stored and exposed manure. The possibility to reduce ammonia release by reducing the amount of stored manure in bins in floor housing systems for laying hens has therefore been investigated. Investigations were carried out in a climate chamber equipped with a floor housing system with a manure removal system with two parallel motor driven conveyors placed below an elevated draining floor. The conditions when manure is stored in bins below draining floors were simulated by storing manure on the conveyors for several days at constant ventilation rates and temperatures. The investigations clearly showed that storage of manure in the bin caused a rapid increase in ammonia concentrations. After about 7 days storage of manure in the bin the ammonia concentration exceeded the hygienic threshold limit values. It can be concluded that long time storage of manure in storage bins below draining floors should not be recommended. It was possible to maintain the ammonia concentration below the hygienic threshold limit values when manure was removed frequently with conveyors. Floor housing systems for laying hens with elevated draining floors should therefore be equipped with manure removal systems that enable frequent removal of manure in the bins.
文摘Housing in the private sector in the metropolitan of Tehran in the past decades has been very much tied to the economical considerations, The current urban and building standards and regulations are believed to have very much contributed to the undermining the many social, environmental and visual potentials of the neighborhoods and to what we face today as congested apartment atmosphere where and the monotonous character of most of the neighborhoods as a result of the very same plans and regulations applied to their development namely the setbacks, land coverage ratios and floor to land area ratios with no regard to the very different characters many of these neighborhoods once had, either traditional and long-established or scenic and natural. The purpose of this paper is to briefly review the current state and trend of urban housing in Tehran and search for practical measures to improve the environment and character of urban housing in the city.
