Based on in-mine instrumentation and theoretical analysis of the unsymmetrical large-deformation that occurred in the roadway after excavation,Differential Floor Heave(DFH)was found to be the main reason for roadway f...Based on in-mine instrumentation and theoretical analysis of the unsymmetrical large-deformation that occurred in the roadway after excavation,Differential Floor Heave(DFH)was found to be the main reason for roadway failure.It needs to be pointed out that the specific roadway was driven in inclined rock strata.In addition,the factors that contribute to the occurrence of DFH are discussed in detail.It is believed that DFH is triggered by the unsymmetrical stress distribution in the floor and the different rock types encountered near the two floor corners.Hence,DFH control should be focused on the left floor corner where shearing failure occurs initially and the left floor surface where tensile failure is more severe.The proposed DFH control strategies include unsymmetrical grouting for the whole roadway,re-design of the roof and ribs support,reinforcement of the weak zones,and release of the concentrated stress in the earlier stage.Meanwhile,it is recommended that in the later stage,both bolts and cable bolts with higher strength and the backfilling technique using the coal measure rocks and concrete should be employed in the reversed-arch floor.The field instrumentation results,after using the proposed control strategies,indicate that large deformation in a DFH roadway has been successfully controlled.展开更多
With the increase in mining depth many mining areas in China have entered a period necessitating mining above aquifers. Production safety in coal mines in northern China is under serious threat from Ordovician karst w...With the increase in mining depth many mining areas in China have entered a period necessitating mining above aquifers. Production safety in coal mines in northern China is under serious threat from Ordovician karst water on coal seam floors, in order to analyze the destruction of water-resisting strata in floors of coal seams being mined and to achieve safe mining above deep aquifers, we established a numerical model of water-resisting strata, considering the structural characteristics and mechanical properties of a floor layered with hard and soft rock. We simulated the distribution characteristics of deformation, failure and seepage using the analytical module of fluid-structure interaction of FLAt：. We also obtained the corresponding stress distribution, deformation and flow vectors. Our results indi- cate that： （1） the advance of the working face causes water-resisting strata in goaf floors to form a deep double-clamped beam, subject to homogeneous loading at the bottom; （2） the two sides of the rock beam are subject 1~0 shear failure; （3） both sides of the rock seam at the bottom of the water-resisting strata are subject to tension and the greater the working face advance, the more serious the failure; C4） the original balance of the stress and seepage fields are broken and redistributed due to mining activities, especially the interaction of the abutment pressure in both sides of the goal; the lateral pressure on the goal floor and the water pressure on the floor of the aquifer promote floor heave and shear failure on both sides of the floor, forming a water-inrush passage. Our study results can provide references for the mechanism of water-inrush on mine floors.展开更多
Deep coal seam mining floor strata water bursting is a complicate nonlinear system, whose factors are coupling and influencing themselves. It built the analytic structure model for deep coal seam mining floor strata w...Deep coal seam mining floor strata water bursting is a complicate nonlinear system, whose factors are coupling and influencing themselves. It built the analytic structure model for deep coal seam mining floor strata water bursting, the judgment matrix was found by the expert scoring method, the contribution weights of the influenced factors were given out by the equation analytic process. The thirteen controlling factors and five main controlling factors were put award by analyzing weights, so the result was basically conform to the field practice. The expert scoring method and analytic process can convert the objective fact to the subjective cognition, so it is a method that can turn the qualitative into the quantitative. This can be relative objectively and precisely to study the question of many factors and grey box.展开更多
A water-resistant key strata model of a goaf floor prior to main roof weighting was developed to explore the relationship between water inrush from the floor and main roof weighting. The stress distribution,broken cha...A water-resistant key strata model of a goaf floor prior to main roof weighting was developed to explore the relationship between water inrush from the floor and main roof weighting. The stress distribution,broken characteristics, and the risk area for water inrush of the water-resistant key strata were analysed using elastic thin plate theory. The formula of the maximum water pressure tolerated by the waterresistant key strata was deduced. The effects of the caved load of the goaf, the goaf size prior to main roof weighting, the advancing distance of the workface or weighting step, and the thickness of the waterresistant key strata on the breaking and instability of the water-resistant key strata were analysed.The results indicate that the water inrush from the floor can be predicted and prevented by controlling the initial or periodic weighting step with measures such as artificial forced caving, thus achieving safe mining conditions above confined aquifers. The findings provide an important theoretical basis for determining water inrush from the floor when mining above confined aquifers.展开更多
基金financially supported by the National Natural Science Foundation of China (Nos.51204166 and 51174195)the Graduate Student Research Innovation Project of Ordinary University in Jiangsu Province (2013) (No.CXLX13_952)
文摘Based on in-mine instrumentation and theoretical analysis of the unsymmetrical large-deformation that occurred in the roadway after excavation,Differential Floor Heave(DFH)was found to be the main reason for roadway failure.It needs to be pointed out that the specific roadway was driven in inclined rock strata.In addition,the factors that contribute to the occurrence of DFH are discussed in detail.It is believed that DFH is triggered by the unsymmetrical stress distribution in the floor and the different rock types encountered near the two floor corners.Hence,DFH control should be focused on the left floor corner where shearing failure occurs initially and the left floor surface where tensile failure is more severe.The proposed DFH control strategies include unsymmetrical grouting for the whole roadway,re-design of the roof and ribs support,reinforcement of the weak zones,and release of the concentrated stress in the earlier stage.Meanwhile,it is recommended that in the later stage,both bolts and cable bolts with higher strength and the backfilling technique using the coal measure rocks and concrete should be employed in the reversed-arch floor.The field instrumentation results,after using the proposed control strategies,indicate that large deformation in a DFH roadway has been successfully controlled.
基金supported by the National Basic Research Program of China (No. 2007CB209400)the National Natural Science Foundation of China (Nos. 50634050,50834004,50874103 and 50904065) the Young Scientists Fund of the School Science Foundation of CUMT (No. 2008A046)
文摘With the increase in mining depth many mining areas in China have entered a period necessitating mining above aquifers. Production safety in coal mines in northern China is under serious threat from Ordovician karst water on coal seam floors, in order to analyze the destruction of water-resisting strata in floors of coal seams being mined and to achieve safe mining above deep aquifers, we established a numerical model of water-resisting strata, considering the structural characteristics and mechanical properties of a floor layered with hard and soft rock. We simulated the distribution characteristics of deformation, failure and seepage using the analytical module of fluid-structure interaction of FLAt：. We also obtained the corresponding stress distribution, deformation and flow vectors. Our results indi- cate that： （1） the advance of the working face causes water-resisting strata in goaf floors to form a deep double-clamped beam, subject to homogeneous loading at the bottom; （2） the two sides of the rock beam are subject 1~0 shear failure; （3） both sides of the rock seam at the bottom of the water-resisting strata are subject to tension and the greater the working face advance, the more serious the failure; C4） the original balance of the stress and seepage fields are broken and redistributed due to mining activities, especially the interaction of the abutment pressure in both sides of the goal; the lateral pressure on the goal floor and the water pressure on the floor of the aquifer promote floor heave and shear failure on both sides of the floor, forming a water-inrush passage. Our study results can provide references for the mechanism of water-inrush on mine floors.
文摘Deep coal seam mining floor strata water bursting is a complicate nonlinear system, whose factors are coupling and influencing themselves. It built the analytic structure model for deep coal seam mining floor strata water bursting, the judgment matrix was found by the expert scoring method, the contribution weights of the influenced factors were given out by the equation analytic process. The thirteen controlling factors and five main controlling factors were put award by analyzing weights, so the result was basically conform to the field practice. The expert scoring method and analytic process can convert the objective fact to the subjective cognition, so it is a method that can turn the qualitative into the quantitative. This can be relative objectively and precisely to study the question of many factors and grey box.
基金supported by the National Natural Science Foundation of China (Nos. 51404013 and 51674008)the Open Projects of State Key Laboratory of Coal Resources and Safe Mining at the China University of Mining and Technology (No. 13KF01)the Natural Science Foundation of Anhui Province (Nos. 1508085ME77 and 1508085QE89)
文摘A water-resistant key strata model of a goaf floor prior to main roof weighting was developed to explore the relationship between water inrush from the floor and main roof weighting. The stress distribution,broken characteristics, and the risk area for water inrush of the water-resistant key strata were analysed using elastic thin plate theory. The formula of the maximum water pressure tolerated by the waterresistant key strata was deduced. The effects of the caved load of the goaf, the goaf size prior to main roof weighting, the advancing distance of the workface or weighting step, and the thickness of the waterresistant key strata on the breaking and instability of the water-resistant key strata were analysed.The results indicate that the water inrush from the floor can be predicted and prevented by controlling the initial or periodic weighting step with measures such as artificial forced caving, thus achieving safe mining conditions above confined aquifers. The findings provide an important theoretical basis for determining water inrush from the floor when mining above confined aquifers.
