Electroosmotic oscillatory flow of micropolar fluid in microchannels:application to dynamics of blood flow in microfluidic devices

The electroosmotic flow of a micropolar fluid in a microchannel bounded by two parallel porous plates undergoing periodic vibration is studied. The equations for conservation of linear and angular momentums and Gauss＇s law of charge distribution are solved within the framework of the Debye-Hückel approximation. The fluid velocity and microrotation are assumed to depend linearly on the Reynolds number. The study shows that the amplitude of microrotation is highly sensitive to the changes in the magnitude of the suction velocity and the width of the microchannel. An increase in the micropolar parameter gives rise to a decrease in the amplitude of microrotation. Numerical estimates reveal that the microrotation of the suspended microelements in blood also plays an important role in controlling the electro-osmotically actuated flow dynamics in microbio-fluidic devices.

Artificial neural network-based subgrid-scale models for LES of compressible turbulent channel flow

Fully connected neural networks(FCNNs)have been developed for the closure of subgrid-scale(SGS)stress and SGS heat flux in large-eddy simulations of compressible turbulent channel flow.The FCNNbased SGS model trained using data with Mach number Ma=3.0 and Reynolds number Re=3000 was applied to situations with different Mach numbers and Reynolds numbers.The input variables of the neural network model were the filtered velocity gradients and temperature gradients at a single spatial grid point.The a priori test showed that the FCNN model had a correlation coefficient larger than 0.91 and a relative error smaller than 0.43,with much better reconstructions of SGS unclosed terms than the dynamic Smagorinsky model(DSM).In a posteriori test,the behavior of the FCNN model was marginally better than that of the DSM in predicting the mean velocity profiles,mean temperature profiles,turbulent intensities,total Reynolds stress,total Reynolds heat flux,and mean SGS flux of kinetic energy,and outperformed the Smagorinsky model.

NUMERICAL INVESTIGATION OF THREE-DIMENSIONAL VISCOUS INCOMPRESSIBLE FLOWS IN DIVERGENT CURVED CHANNELS AND TURBULENT MODEL STUDY

In order to make the numerical calculation of viscous flows more convenient for the flows in channel with complicated profile governing equations expressed in the arbitrary curvilinear coordinates were derived by means of Favre density-weighted averaged method, and a turbulent model with effect of curvature modification was also derived. The numerical calculation of laminar and turbulent flown in divergent curved channels was carried out by means of parabolizeil computation method. The calculating results were used to analyze and investigate the aerodynamic performance of talor cascades in compressors preliminarily.

Numerical Analysis of Flow-Induced Vibration and Noise Generation in a Variable Cross-Section Channel

Flow channels with a variable cross-section are important components of piping system and are widely used in variousfields of engineering.Using afinite element method and modal analysis theory,flow-induced noise,mode shapes,and structure-borne noise in such systems are investigated in this study.The results demonstrate that the maximum displacement and equivalent stress are located in the part with variable cross-sectional area.The aver-age excitation force on theflow channel wall increases with theflow velocity.The maximum excitation force occurs in the range of 0–20 Hz,and then it decreases gradually in the range of 20–1000 Hz.Additionally,as theflow velocity rises from 1 to 3 m/s,the overall sound pressure level associated with theflow-induced noise grows from 49.37 to 66.37 dB.Similarly,the overall sound pressure level associated with the structure-borne noise rises from 40.27 to 72.20 dB.When theflow velocity is increased,the increment of the structure-borne noise is higher than that of theflow-induced noise.

On interaction between freely moving bodies and fluid in a channel flow

The interaction between free fast-moving bodies(or particles)and the fluid surrounding them is studied,motivated by applications in different branches of industry,biomedicine,the environment and science such as flying droplets,ice growth,dust,impacts,food grains,sport,complexity and storms.New inviscid-based modelling and results on the behaviour of two interacting bodies inside a channel flow are described.This is followed by discussion of the more-bodies extension with a view to treating arrays of bodies in a rational manner.Significant dependences on initial conditions and on the comparative body masses and moments of inertia are found for the occurrence of body-body impacts as opposed to wall-body impacts and for the associated impact times.

Slip boundary effect on the critical Reynolds number of subcritical transition in channel flow

In this letter,the effect of slip boundary on the origin of subcritical transition in two-dimensional chan-nel flows is studied numerically and theoretically.It is shown that both the positive and the negative slip lengths will increase the critical Reynolds number of localized wave packet and hence postpone the transition.By applying a variable transformation and expanding the variables about a small slip length,it is illustrated that the slip boundary effect only exists in the second and higher order modulations of the no-slip solution,and hence explains the power law found in simulations,i.e.the relative increment of the critical Reynolds number due to the slip boundary is proportional to the square of the slip length.

Hybrid URANS/LES Method of Flow Fields in Axial-flow Compressor Rotor Rotor

Accurate and efficient prediction of the aerodynamic performance and flow details of axial-flow com-pressors is of great engineering application value for the aerodynamic design and flow control of axial-flow compres-sors.In this work,a delayed detached eddy simulation method is developed and applied to numerically simulate the tur-bulent channel flow and the aerodynamic performance of NASA Rotor 35.Several acceleration techniques including parallel implementation are also used to speed up the iteration convergence.The mean velocity distribution and Reyn-olds stress distribution in the boundary layer of turbulent channel flow and the aerodynamic performance curve of NASA Rotor 35 are predicted.The good agreement between the present delayed detached eddy simulation results and the available direct numerical simulation results or experimental data confirms the effectiveness of the developed meth-od in the accurate and efficient prediction of complex flow in turbomachinery.

Utility Impact below Bridge or Culvert Soffit on Open Channel Flow

The background to this research was a flooding incident that occurred in Bridgend, Co. Donegal, Ireland in August 2017. While several properties were flooded, a flooding case study of a single dwelling house adjacent to the Bridgend River at Riverdale, Bunamayne, Co. Donegal, Ireland is used herein. For this study the flooded site shall be referred to as the “Hegarty property”. A structure in the form of a stone arched culvert is located directly adjacent to the two-storey detached dwelling house on the Hegarty Property. While the culvert is referred to locally as a bridge, within this research the word culvert will be used in connection with the structure. The culvert has a concrete surrounded utility (watermain) crossing at a gradient below the culvert soffit on the upstream face of the structure. The utility obstructed flow through the culvert and contributed to the flooding event. Given the implication of climate change and the increased probability of more extreme flooding events, it was decided to explore the case study to ascertain the factors that contribute to flooding events when utilities are positioned at culvert or bridge structures. This work was completed to assist undergraduate students, researchers, and local authorities in a relatively unknown area of flood causation.

Analysis of the Influence of Geometrical Parameters on the Performance of a Proton Exchange Membrane Fuel Cell

A suitable channel structure can lead to efficient gas distribution and significantly improve the power density of fuel cells.In this study,the influence of two channel design parameters is investigated,namely,the ratio of the channel width to the bipolar plate ridge width(i.e.,the channel ridge ratio)and the channel depth.The impact of these parameters is evaluated with respect to the flow pattern,the gas composition distribution,the temperature field and the fuel cell output capability.The results show that a decrease in the channel ridge ratio and an increase in the channel depth can effectively make the distributions of velocity,temperature and concentration more uniform in each channel and improve the output capability of the fuel cell.An increase in the channel ridge ratio and depth obviously reduces the flow resistance and improves the flow characteristics.

Structural ensemble dynamics based closure model for wall-bounded turbulent flow

Wall-bounded turbulent flow involves the development of multi-scale turbulent eddies, as well as a sharply varying boundary layer. Its theoretical descriptions are yet phenomenological. We present here a new framework called structural ensemble dynamics （SED）, which aims at using systematically all relevant statistical properties of turbulent structures for a quantitative description of ensemble means. A new set of closure equations based on the SED approach for a turbulent channel flow is presented. SED order functions are defined, and numerically determined from data of direct numerical simulations （DNS）. Computational results show that the new closure model reproduces accurately the solution of the original Navier-Stokes simulation, including the mean velocity profile, the kinetic energy of the streamwise velocity component, and every term in the energy budget equation. It is suggested that the SED-based studies of turbulent structure builds a bridge between the studies of physical mechanisms of turbulence and the development of accurate model equations for engineering predictions.

Experimental study on influence of boundary on location of maximum velocity in open channel flows

The velocity dip phenomenon may occur in a part of or in the whole flow field of open channel flows due to the secondary flow effect. Based on rectangular flume experiments and the laser Doppler velocimetry, the influence of the distance to the sidewall and the aspect ratio on the velocity dip is investigated. Through application of statistical methods to the experimental results, it is proposed that the flow field may be divided into two regions, the relatively strong sidewall region and the relatively weak sidewall region. In the former region, the distance to the sidewall greatly affects the location of maximum velocity, and, in the latter region, both the distance to the sidewall and the aspect ratio influence the location of the maximum velocity.

Orientation distribution of fibres in a channel flow of fibre suspension

The orientation and concentration distributions of fibres in laminar and turbulent channel flows are investigated numerically. The obtained results are in good agreement with the experimental data. In the laminar flow regime, more fibres orient to the flow direction as the Reynolds number increases. The shear rate of fluid around a fibre plays an important role in determining the orientation distribution of fibres, while the fibre density and the fibre aspect-ratio have marginal influence on the orientation distribution. In the turbulent regime, the orientation distribution of fibres becomes more homogeneous with the increase of Reynolds number, and the concentration profile is flatter than that in the laminar regime. The fluctuating intensity of fibre velocity in the downstream direction is larger than that in the lateral directions.

On Turbulent Contribution to Frictional Drag in Wall-Bounded Turbulent Flow

We propose a simple model for turbulent contribution to the frictional drag in a wall-bounded turbulent flow based on the characteristic parameters of turbulent bursting events, it is verified on water and drag-reducing surfactant solution flows investigated by particle image velocimetry in experiments. It is obtained that the turbulent contribution to the skin friction factor is linearly proportional to the product of the spatial frequency and strength of turbulent bursts originated from the wall.

Predictive model for stage-discharge curve in compound channels with vegetated floodplains

The governing equation of the discharge per unit width, derived from the flow continuity equation and the momentum equation in the vegetated compound chan- nel, is established. The analytical solution to the discharge per unit width is presented, including the effects of bed friction, lateral momentum transfer, drag force, and secondary flows. A simple＇ but available numerical integral method, i.e., the compound trapezoidM formula, is used to calculate the approximate solutions of the sub-area discharge and the total discharge. A comparison with the published experimental data from the U. K. Flood Channel Facility （UK-FCF） demonstrates that this model is capable of predicting not only the stage-discharge curve but also the sub-area discharge in the vegetated com- pound channel. The effects of the two crucial parameters, i.e., the divided number of the integral interval and the secondary flow coefficient, on the total discharge are discussed and analyzed.

Direct simulation of MHD flows in dual-coolant liquid metal fusion blanket using a consistent and conservative scheme

Direct simulation of 3-D MHD(magnetohydrodynamics) flows in liquid metal fusion blanket with flow channel insert(FCI) has been conducted.Two kinds of pressure equilibrium slot (PES) in FCI,which are used to balance the pressure difference between the inside and outside of FCI,are considered with a slot in Hartmann wall or a slot in side wall,respectively.The velocity and pressure distribution of FCI made of SiC/SiC_f are numerically studied to illustrate the 3-D MHD flow effects,which clearly show that the flows in fusion blanket with FCI are typical three-dimensional issues and the assumption of 2-D fully developed flows is not the real physical problem of the MHD flows in dual-coolant liquid metal fusion blanket.The optimum opening location of PES has been analyzed based on the 3-D pressure and velocity distributions.

Transport of dissolved oxygen at the sediment-water interface in the spanwise oscillating flow

The distribution and concentration of dissolved oxygen(DO)play important roles in aerobic heterotroph activities and some slow chemical reactions,and can affect the water quality,biological communities,and ecosystem functions of rivers and lakes.In this work,the transport of high Schmidt number DO at the sediment-water interface of spanwise oscillating flow is investigated.The volume-averaged Navier-Stokes(VANS)equations and Monod equation are used to describe the flow in the sediment layer and the sediment oxygen demand of microorganisms.The phase-averaged velocities and concentrations of different amplitudes and periods are studied.The dependence of DO transfer on the amplitude and period is analyzed by means of phase-average statistical quantities.It is shown that the concentration in the sediment layer is positively correlated with the turbulence intensity,and the DO concentration and penetration depth in the sediment layer increases when the period and amplitude of the oscillating flow increase.Moreover,in the presence of oscillating flow,a specific scaling relationship exists between the Sherwood number/oxygen consumption of aerobic heterotrophs and the Reynolds number.

EXPERIMENTAL STUDY ON TURBULENT FEATURES IN THE NEGATIVE TRANSPORT REGION OF ASYMMETRIC PLANE CHANNEL FLOW

Turbulent features of streamwise and vertical components of velocity in the negative transport region of asymmetric plane channel flow have been studied experimentally in details. Experiments show that turbulent fluctuations in negative transport region are suppressed, and their probability distributions are far from Gaussian. Besides, the skewness factors attain their negative maxima at the position of the maximum mean velocity, whereas the flatness factors attain their positive maxima at the same position.

The nature of near-wall convection velocity in turbulent channel flow

A novel notion of turbulent structure the local cascade structure-is introduced to study the convection phenomenon in a turbulent channel flow. A space-time cross-correlation method is used to calculate the convection velocity. It is found that there are two characteristic convection speeds near the wall, one associated with small-scale streaks of a lower speed and another with streamwise vortices and hairpin vortices of a higher speed. The new concept of turbulent structure is powerful to illustrate the dominant role of coherent structures in the near-wall convection, and to reveal also the nature of the convection-the propagation of patterns of velocity fluctuations-which is scale-dependent.

Analytic homotopy solution of generalized three-dimensional channel flow due to uniform stretching of the plate

In this communication a generalized three- dimensional steady flow of a viscous fluid between two infinite parallel plates is considered. The flow is generated due to uniform stretching of the lower plate in x- and y-directions. It is assumed that the upper plate is uniformly porous and is subjected to constant injection. The governing system is fully coupled and nonlinear in nature. A complete analytic solution which is uniformly valid for all values of the dimensionless parameters β Re and λ is obtained by using a purely analytic technique, namely the homotopy analysis method. Also the effects of the parameters β Re and λ on the velocity field are discussed through graphs.

Mechanism of controlling turbulent channel flow with the effect of spanwise Lorentz force distribution

A direct numerical simulation（DNS） is performed to investigate the control effect and mechanism of turbulent channel flow with the distribution of spanwise Lorentz force. A sinusoidal distribution of constant spanwise Lorentz force is selected, of which the control effects, such as flow characters, mean Reynolds stress, and drag reductions, at different parameters of amplitude A and wave number k_x are discussed. The results indicate that the control effects vary with the parameter A and k_x. With the increase of A, the drag reduction rate D_r first increases and then decreases rapidly at low k_x,and slowly at high k_x. The low drag reduction（or even drag increase） is due to a weak suppression or even the enhancements of the random velocity fluctuation and mean Reynolds stress. The efficient drag reduction is due to the quasi-streamwise vortex structure induced by Lorentz force, which contributes to suppressing the random velocity fluctuation and mean Reynolds stress, and the negative vorticity improves the distribution of streamwise velocity. Therefore, the optimal control effect with a drag reduction of up to 58% can be obtained.