Numerical simulation of standing wave with 3D predictor-corrector finite difference method for potential flow equations

A three-dimensional （3D） predictor-corrector finite difference method for standing wave is developed. It is applied to solve the 3D nonlinear potential flow equa- tions with a free surface. The 3D irregular tank is mapped onto a fixed cubic tank through the proper coordinate transform schemes. The cubic tank is distributed by the staggered meshgrid, and the staggered meshgrid is used to denote the variables of the flow field. The predictor-corrector finite difference method is given to develop the difference equa- tions of the dynamic boundary equation and kinematic boundary equation. Experimental results show that, using the finite difference method of the predictor-corrector scheme, the numerical solutions agree well with the published results. The wave profiles of the standing wave with different amplitudes and wave lengths are studied. The numerical solutions are also analyzed and presented graphically.

Optimal convergence rates for three-dimensional turbulent flow equations

In this paper, the convergence turbulent flow equations are considered. By rates of solutions to the three-dimensional combining the LP-Lq estimate for the linearized equations and an elaborate energy method, the convergence rates are obtained in various norms for the solution to the equilibrium state in the whole space when the initial perturbation of the equilibrium state is small in the H3-framework. More precisely, the optimal convergence rates of the solutions and their first-order derivatives in the L2-norm are obtained when the LP-norm of the perturbation is bounded for some p ε [1, 6）.

ON THE COMPLETENESS OF THE GENERALIZED AXISYMMETRIC STOKES FLOW EQUATION

This paper defines new kinds of functions——the conjugate axisymmetric poteptial functions. With the aid of them, we can prove the completeness of the solutions of the generalized axisymmetric Stokes flow equation without the condition on the convexity of the domain.

THE ANALYTIC RESOLUTIONS AND APPLICATIONS OF THE NON－LINEAR SEEPAGE FLOW EQUATIONS OF COAL INFUSION

hi this paper. the author uses the theory of fluid mechanics. dynamics of fluids in Porous media. gas seepage flow in coal seams and combines the tests in the laboratory with the actual coal infusion to have an investigating and study from the theory to the mechanism of coal infusion to wet coal seams. through the analysis to the process of coal infusion the author builds up the mathematical models and has a detailed discussion to the boundary conditions of coal infusion. Because the equation sets to describe coal infusion are non-linear. we have made a simplification to them to use the dimension analysis theory by leading into the non-dimensions of water pressure of coal infusion, seepage flow rate. increment of coal seam moisture and so on Besides the analytic and approximate solutions have also been discussed. At last. we use the scientific research item of the actual coal infusion to illustrate the effects and importance of the theory to direct actual coal infusion and its designs.

High-order Soliton Matrix for the Third-order Flow Equation of the Gerdjikov-Ivanov Hierarchy Through the Riemann-Hilbert Method

The Gerdjikov-Ivanov(GI)hierarchy is derived via recursion operator,in this article,we mainly investigate the third-order flow GI equation.In the framework of the Riemann-Hilbert method,the soliton matrices of the third-order flow GI equation with simple zeros and elementary high-order zeros of Riemann-Hilbert problem are constructed through the standard dressing process.Taking advantage of this result,some properties and asymptotic analysis of single soliton solution and two soliton solution are discussed,and the simple elastic interaction of two soliton are proved.Compared with soliton solution of the classical second-order flow,we find that the higher-order dispersion term affects the propagation velocity,propagation direction and amplitude of the soliton.Finally,by means of a certain limit technique,the high-order soliton solution matrix for the third-order flow GI equation is derived.

Numerical solution of potential flow equations with a predictor-corrector finite difference method

We develop a numerical solution algorithm of the nonlinear potential flow equations with the nonlinear free surface boundary condition.A finite difference method with a predictor-corrector method is applied to solve the nonlinear potential flow equations in a two-dimensional (2D) tank.The irregular tank is mapped onto a fixed square domain with rectangular cells through a proper mapping function.A staggered mesh system is adopted in a 2D tank to capture the wave elevation of the transient fluid.The finite difference method with a predictor-corrector scheme is applied to discretize the nonlinear dynamic boundary condition and nonlinear kinematic boundary condition.We present the numerical results of wave elevations from small to large amplitude waves with free oscillation motion,and the numerical solutions of wave elevation with horizontal excited motion.The beating period and the nonlinear phenomenon are very clear.The numerical solutions agree well with the analytical solutions and previously published results.

Flow stress equation for multipass hot-rolling of aluminum alloys

A series of simple axisymmetric compression tests were carried out on the computer servo controlled Gleeble 1 500 machine when strain rates ranged between 0.05 25 s -1 and deformation temperature 300 500 ℃. The results show that flow stress is related to the Zener Hollonom parameter Z and strain, as well as the static recrystallization fraction between passes during multipass hot deformation of 5182 aluminum alloy. Hence, a modified exponential flow stress equation was presented by considering the values of ln A and β as functions of strain, and by using the uniform softening method and incorporating the static recrystallization fraction between passes to consider the effects of residual strain during multipass hot rolling of 5182 aluminum alloy. The validity of the equation was examined by a typical non isothermal multipass deformation test.

Formal Similarity of Solutions in the Laplace Space on the Class of Fluid Flow Differential Equation

In this paper, the fluid flow differential equation based on the homogenous reservoirs model is first reviewed. Then a theorem about the formal similarity of solutions in the Laplace space with outer boundary conditions and inner boundary condition is presented and proved. Lastly, a corollary of our theorem is given particularly on inner boundary. The obtained results are very helpful for understanding inherent laws of relevant engineering science and designing practical analysis software.

The Korteweg-de Vires equation for the bidirectional pedestrian flow model considering the next-nearest-neighbor effect

This paper focuses on a two-dimensional bidirectional pedestrian flow model which involves the next-nearest-neighbor effect. The stability condition and the Korteweg-de Vries （KdV） equation are derived to describe the density wave of pedestrian congestion by linear stability and nonlinear analysis. Through theoretical analysis, the soliton solution is obtained.

NUMERICAL SIMULATION OF THE FLOW PAST WING-BODY USING EULER EQUATIONS

AbstractThis paper gives H-O type grid generation and applies finite-volume method forwing-body flow.A 3-D Euler code for wing-body has been developed. We improve in thiscode the distribution of the number of grid points over wing and body surfaces,and keepthe training edge of the wing being one of the grid lines even when the edge has sweepbackor sweep forward.The code developed can provide not only the spanwise pressure distribu-tion as usual ou cross-flow planes,but also the chordwise Pressure distributions.The com-putation for NASA TN D-712 wing-body model with the present code shows that thecomputed pressure distributions are in very good agreement with the experiment.

ANALYTICAL SOLUTIONS FOR EQUATIONS OF UNSTEADY FLOW OF NON-NEWTONIAN FLUIDS IN TUBE

This paper presents analytieal solutions to the partial differential equations for unsteady flow of the second-order fluid and Maxwell fluid in tube by using the integral transform method. It can be used to analyse the behaviour of axial velocity and shear stress for unsteady flow of nun-Newtonian visco-elastie fluids in tube, and to provide a theoretical base for the projection of pipe-line engineering.

A CLOSED SYSTEM OF EQUATIONS FOR DENSE TWO-PHASE FLOW AND EXPRESSIONS OF SHEARING STRESS OF DISPERSED PHA’E AT A WALL

Inthis paper, each of the two phases in dense two-phase flow is considered as continuous medium and the fundamental equations for two-phase flow arc described in Eulerian form. The generalized constitutive relation of the Bingham fluid is applied to the dispersed phase with the analysis oj physical mechanism of dense two-phase flow. The shearing stress of dispersed phase at a wall is used to give a boundary condition. Then a mathematical model for dense two-phase flow is obtained. In addition, the expressions of shearing stress of dispersed phase at a wall is derived according to the fundamental model of the friclional collision between dispersed-plutse particles and the wall.

THE VERIFICATION OF THE CURRENT TRANSIENT EQUATION AT TUBULAR ELECTRODES IN A FLOWING FLUID UNDER POTENTIAL STEP

The equation derived for the response of the current transients in the flowing fluid is verified experimentally.

An overview on nonlinear porous flow in low permeability porous media

This paper gives an overview on nonlinear porous flow in low permeability porous media, reveals the microscopic mechanisms of flows, and clarifies properties of porous flow fluids. It shows that, deviating from Darcy＇s linear law, the porous flow characteristics obey a nonlinear law in a low-permeability porous medium, and the viscosity of the porous flow fluid and the permeability values of water and oil are not constants. Based on these characters, a new porous flow model, which can better describe low permeability reservoir~ is established. This model can describe various patterns of porous flow, as Darcy＇s linear law does. All the parameters involved in the model, having definite physical meanings, can be obtained directly from the experiments.

Gas-kinetic numerical method for solving mesoscopic velocity distribution function equation

A gas-kinetic numerical method for directly solving the mesoscopic velocity distribution function equation is presented and applied to the study of three-dimensional complex flows and micro-channel flows covering various flow regimes. The unified velocity distribution function equation describing gas transport phenomena from rarefied transition to continuum flow regimes can be presented on the basis of the kinetic Boltzmann-Shakhov model equation. The gas-kinetic finite-difference schemes for the velocity distribution function are constructed by developing a discrete velocity ordinate method of gas kinetic theory and an unsteady time-splitting technique from computational fluid dynamics. Gas-kinetic boundary conditions and numerical modeling can be established by directly manipulating on the mesoscopic velocity distribution function. A new Gauss-type discrete velocity numerical integra- tion method can be developed and adopted to attack complex flows with different Mach numbers. HPF paral- lel strategy suitable for the gas-kinetic numerical method is investigated and adopted to solve three-dimensional complex problems. High Mach number flows around three-dimensional bodies are computed preliminarilywith massive scale parallel. It is noteworthy and of practical importance that the HPF parallel algorithm for solving three-dimensional complex problems can be effectively developed to cover various flow regimes. On the other hand, the gas-kinetic numerical method is extended and used to study micro-channel gas flows including the classical Couette flow, the Poiseuillechannel flow and pressure-driven gas flows in twodimensional short micro-channels. The numerical experience shows that the gas-kinetic algorithm may be a powerful tool in the numerical simulation of microscale gas flows occuring in the Micro-Electro-Mechanical System （MEMS）.

DEVELOPMENT OF CONSTITUTE EQUATIONS FOR Ti-6Al-4V ALLOY UNDER HOT-WORKING CONDITION

The deformaton behavior of Ti - 6Al - 4V alloy under hot - working condition has been studied by compression testing in the temperature range 750 - 950℃ and strain rate range 0.05 - 15s -1. The flow stress decreases with the increase of temperature and with the decrease of strain rate. After a steep initial strain hardening, a flow softening occurs. This softening is mainly ascribed to the temperature rise and dynamic recmptallisation.By a simple extension, a classical sinushyperbolic constitutive equation can be used to describe the flow behavior of Ti - 6Al - 4V alloy. flow stress is described as a function of strain, strain rate and temperature. The parameters Q, n andaare the same at differ- ent deformation conditions, and A is a funciton of strain.

A UNIFORMLY VALID ASYMPTOTIC SOLUTION OF THE NAVIER-STOKES EQUATIONS

In this paper, problems of the flow over a fat plate in the large Reynolds numbercase are studied by using the method of multiple scales￣[1,2].We have obtained N-orderuniformly valid asymptotic solutions of the Naver-Stodes equations.

Forward modeling of tight sandstone permeability based on mud intrusion depth and its application in the south of the Ordos Basin

Permeability is an important index in reservoir evaluation,oil and gas accumulation control,and production effi ciency.At present,permeability can be obtained through several methods.However,these methods are not suitable for tight sandstone in general because the pore type in tight sandstone is mainly secondary pores and has the characteristics of low porosity and permeability,high capillary pressure,and high irreducible water saturation.Mud invasion depth is closely related to permeability during drilling.In general,the greater the permeability,the shallower the mud invasion depth,and the smaller the permeability,the deeper the mud invasion depth.Therefore,this paper builds a model to predict the permeability of tight sandstone using mud invasion depth.The model is based on the improvement of the Darcy flow equation to obtain permeability using mud invasion depth inversion of array induction logging.The influence of various permeability factors on the model is analyzed by numerical simulation.The model is used to predict the permeability of tight sandstone in the south of the Ordos Basin.The predicted permeability is highly consistent with the core analysis permeability,which verifi es the reliability of the method.

Methods for simultaneously evaluating reserve and permeability of undersaturated coalbed methane reservoirs using production data during the dewatering stage

In this work,a flowing material balance equation(FMBE) is established for under saturated coalbed methane(CBM) reservoirs,which considers immobile free gas expansion effect at the dewatering stage.Based on the established FMBE,five straight-line methods are proposed to determine the control area,initial water reserve,initial free gas reserve,initial adsorbed gas reserve,original gas in place,as well as permeability at the same time.Subsequently,the proposed FMBE methods for undersaturated CBM reservoirs are validated against a reservoir simulation software with and without considering free gas expansion.Finally,the proposed methods are applied in a field case when considering free gas expansion effect.Validation cases show that the straight-line relationships for the proposed five FMBE methods are excellent,and good agreements are obtained among the actual reserves and permeabilities and those evaluated by the proposed five FMBE methods,indicating the proposed five FMBE methods are effective and rational for CBM reservoirs.Results show that a small amount of free gas will result in a great deviation in reserve evaluation;hence,the immobile free gas expansion effect should be considered when establishing the material balance equation of undersaturated CBM reservoirs at the dewatering stage.

The mechanical energy equation for total flow in open channels

The mechanical energy equation is a fundamental equation of a 1-D mathematical model in Hydraulics and Engineering Fluid Mechanics. This equation for the total flow used to be deduced by extending the Bernoulli＇s equation for the ideal fluid in the streamline to a stream tube, and then revised by considering the viscous effect and integrated on the cross section. This derivation is not rigorous and the effect of turbulence is not considered. In this paper, the energy equation for the total flow is derived by using the Navier-Stokes equations in Fluid Mechanics, the results are as follows：（1） A new energy equation for steady channel flows of incompressible homogeneous liquid is obtained, which includes the variation of the turbulent kinetic energy along the channel, the formula for the mechanical energy loss of the total flow can be determined directly in the deduction process.（2） The theoretical solution of the velocity field for laminar flows in a rectangular open channel is obtained and the mechanical energy loss in the energy equation is calculated. The variations of the coefficient of the mechanical energy loss against the Reynolds number and the width-depth ratio are obtained.（3） The turbulent flow in a rectangular open channel is simulated using 3-D Reynolds averaged equations closed by the Reynolds stress model（RSM）, and the variations of the coefficient of the mechanical energy loss against the Reynolds number and the width-depth ratio are discussed.