Changes in filtration and capacitance properties of highly porous reservoir in underground gas storage:CT-based and geomechanical modeling

The paper presents the results of comprehensive studies of filtration and capacitance properties of highly porous reservoir rocks of the aquifer of an underground gas storage facility.The geomechanical part of the research included studying the dependence of rock permeability on the stress-strain state in the vicinity of the wells,and physical modeling of the implementation of the method of increasing the permeability of the wellbore zone-the method of directional unloading of the reservoir.The digital part of the research included computed tomography(CT)-based computer analysis of the internal structure,pore space characteristics,and filtration properties before and after the tests.According to the results of physical modeling of deformation and filtration processes,it is found that the permeability of rocks before fracture depends on the stress-strain state insignificantly,and this influence is reversible.However,when downhole pressure reaches 7-8 MPa,macrocracks in the rock begin to grow,accompanied by irreversible permeability increase.Porosity,geodesic tortuosity and permeability values were obtained based on digital studies and numerical modeling.A weak degree of transversal anisotropy of the filtration properties of rocks was detected.Based on the analysis of pore size distribution,pressure field and flow velocities,high homogeneity and connectivity of the rock pore space is shown.The absence of pronounced changes in pore space characteristics and pore permeability after non-uniform triaxial loading rocks was shown.On the basis of geometrical analysis of pore space,the reasons for weak permeability anisotropy were identified.The filtration-capacitance properties obtained from the digital analysis showed very good agreement with the results of field and laboratory measurements.The physical modeling has confirmed the efficiency of application of the directional unloading method for the reservoir under study.The necessary parameters of its application were calculated:bottomhole geometry,stage of operation,stresses and pressure drawdown value.

A comparison of centrifugation and tangential flow filtration for nanoparticle purification: A case study on acetalated dextran nanoparticles

Tangential fiow filtration (TFF) is a purification method commonly used in a multitude of fields,including particle engineering.Currently,there is still a lack of comprehensive understanding of the effects of key TFF parameters on nanoparticle (NP) characteristics (purification outcomes).The present study aimed to investigate the influence of various factors on the characteristics of TFF-purified NP.The most commonly used NP purification method,centrifugation,was studied as a control.A design of experiment approach was implemented to investigate the influence of transmembrane pressure,flow rate,and initial drug loading on NP characteristics using paclitaxel as a model small molecule.Following the determination of optimized TFF parameters,the two purification methods were assessed using other model small molecules (i.e.tacrolimus and resveratrol).The results indicated that the TFF parameters and initial loading of the drug played important roles in the purified NP outcomes.Compared with the centrifugation method,TFF resulted in smaller NP with higher drug loading.TFF was able to circumvent issues associated with conventional centrifugation,while yielding similar results,and can potentially serve as a suitable large-scale purification method for polymeric NP.

Progression of injectivity damage with oily waste water in linear flow

Numerous laboratory experiments and field cases show that even very small amount of oil in injected water can cause severe injectivity damage. Although injectivity decline caused by oil droplets has been studied experimentally, there is still lack of an easy-to-use and widely accepted model to predict the decline behavior. In this work, we developed an analytical model to predict the time-dependent progress of the water permeability reduction in linear flow by analyzing experimental data obtained from linear core flooding. The model considers mass transfer of the oil phase from the produced water to the rock due capture effects by dispersion, advection and adsorption inside the rock. As the captured oil saturation increases, permeability reduces following the relative permeability drainage relationship. The reduction stabilizes when the oil saturation comes to an equilibrium value controlled by oil droplet size and injection velocity. The model is calibrated using published experimental data from prolonged core floods with oil- contaminated waste water. Theoretical runs of the model replicate all the effects known from experimental observations. Resulting from the model is a distributed change of permeability vs. time and distance from the point of injection that can be converted to the overall injectivity damage.

Numerical simulation for determining three zones in the goaf at a fully-mechanized coal face

According to the theory of ventilation network, a model for a filtration flow field in goaf was built and simulation soft- ware for determining the three zones in goaf has been developed. This software uses no-gap-connection between Visual Basic (VB) and Excel to exchange data, uses Component Object Model (COM) component of MATLAB to plot charts of the three zones and to export the corresponding coordinates of the isolines. An example shows that this software is convenient and simple. By using it, the three zones can be easily determined. The software is convenient in studies and analyses of the three zones in goaf.