A water model with a geometric similarity ratio of 1:5 was developed to investigate the gas-liquid mass transfer and flow charac- teristics in a Peirce-Smith converter. A gas mixture of CO2 and Ar was injected into a...A water model with a geometric similarity ratio of 1:5 was developed to investigate the gas-liquid mass transfer and flow charac- teristics in a Peirce-Smith converter. A gas mixture of CO2 and Ar was injected into a NaOH solution bath. The flow field, volumetric mass transfer coefficient per unit volume (Ak/V; where A is the contact area between phases, V is the volume, and k is the mass transfer coeffi- cient), and gas utilization ratio (t/) were then measured at different gas flow rates and blow angles. The results showed that the flow field could be divided into five regions, i.e., injection, strong loop, weak loop, splashing, and dead zone. Whereas the Ak/V of the bath increased and then decreased with increasing gas flow rate, and n steadily increased. When the converter was rotated clockwise, both Ak/F and t/increased. However, the flow condition deteriorated when the gas flow rate and blow angle were drastically increased. Therefore, these para- meters must be controlled to optimal conditions. In the proposed model, the optimal gas flow rate and blow angle were 7.5 m3.h-1 and 10°, respectively.展开更多
To enhance the quality of grade 20 carbon-steel on the continuous casting production line, the mechanism of forming blowholes and non-metallic inclusions in billets and numerical simulation of flow phenomena about liq...To enhance the quality of grade 20 carbon-steel on the continuous casting production line, the mechanism of forming blowholes and non-metallic inclusions in billets and numerical simulation of flow phenomena about liquid steel in tundish were studied. The results show that the configuration and operation of tundish play an important part in quality assurance of grade 20 carbon-steel products. By optimizing the configuration of the tundish, the depth of liquid bath in tundish is enhanced, the impact of liquid steel is decreased, and the residence time of liquid steel is lengthened, which is useful for eliminating inclusions and blowholes and improving the service life of tundish. Improving the pouring and tapping operation of liquid steel can avoid the contact of liquid steel with air, and decrease re-oxidation. Strict control of the superheat degree of casting liquid steel can decrease the non-metallic inclusion content of the re-oxidation in billets and reduce the erosion of tundish. The inclusions and blowholes in the continuous casting grade 20 steel billets are reduced to a great extent and qualification rate is enhanced from 60% to 80%.展开更多
Fuel cells and flow batteries are promising technologies to address climate change and air pollution problems. An understanding of the complex multiscale and multiphysics transport phenomena occurring in these electro...Fuel cells and flow batteries are promising technologies to address climate change and air pollution problems. An understanding of the complex multiscale and multiphysics transport phenomena occurring in these electrochemical systems requires powerful numerical tools. Over the past decades, the lattice Boltzmann (LB) method has attracted broad interest in the computational fluid dynamics and the numerical heat transfer communities, primarily due to its kinetic nature making it appropriate for modeling complex multiphase transport phenomena. More importantly, the LB method fits well with parallel computing due to its locality feature, which is required for large-scale engineering applications. In this article, we review the LB method for gas-liquid two-phase flows, coupled fluid flow and mass transport in porous media, and particulate flows. Examples of applications are provided in fuel cells and flow batteries. Further developments of the LB method are also outlined.展开更多
The use of dendrochronology to study and date geomorphic processes in volcanic environments is still incipient, even more so on the volcanic slopes covered by temperate forests in central Mexico. Mass movements, such ...The use of dendrochronology to study and date geomorphic processes in volcanic environments is still incipient, even more so on the volcanic slopes covered by temperate forests in central Mexico. Mass movements, such as debris flows, often impact forest stands where they cause damage to individual trees, thereby generating growth disturbances(GD) in the tree-ring records. The identification and dating of GD enables reconstruction of the age of trees colonizing bare surfaces after major events, but also allows the assessment of the frequency or spatial distribution of past geomorphic process activity. Here we used increment cores from 65 Pinus leiophylla, Abies religiosa, and Alnus jorullensis trees growing in the Axal gorge, on the southern slopes of La Malinche volcano, to unravel past debris-flow activity both temporally and spatially. Based on the combination of GD records, a weighted tree response index(Wit), field evidence and hydrometeorological records, we reconstructed 23 debris flows since 1933.Interestingly, almost two-thirds of the reconstructed years with debris-flow activity in Axal gorge match with events recorded in Axaltzintle gorge located on the NE slopes of La Malinche. These findings suggest a regional triggering mechanism, most likely related to the occurrence of hurricanes. This research could be useful for disaster risk management of the La Malinche National Park.展开更多
基金financially supported by the National Natural Science Foundation of China(No.51504018)the China Postdoctoral Science Foundation(2015M580986)the Fundamental Research Funds for the Central Universities(FRF-TP-17-038A2)
文摘A water model with a geometric similarity ratio of 1:5 was developed to investigate the gas-liquid mass transfer and flow charac- teristics in a Peirce-Smith converter. A gas mixture of CO2 and Ar was injected into a NaOH solution bath. The flow field, volumetric mass transfer coefficient per unit volume (Ak/V; where A is the contact area between phases, V is the volume, and k is the mass transfer coeffi- cient), and gas utilization ratio (t/) were then measured at different gas flow rates and blow angles. The results showed that the flow field could be divided into five regions, i.e., injection, strong loop, weak loop, splashing, and dead zone. Whereas the Ak/V of the bath increased and then decreased with increasing gas flow rate, and n steadily increased. When the converter was rotated clockwise, both Ak/F and t/increased. However, the flow condition deteriorated when the gas flow rate and blow angle were drastically increased. Therefore, these para- meters must be controlled to optimal conditions. In the proposed model, the optimal gas flow rate and blow angle were 7.5 m3.h-1 and 10°, respectively.
文摘To enhance the quality of grade 20 carbon-steel on the continuous casting production line, the mechanism of forming blowholes and non-metallic inclusions in billets and numerical simulation of flow phenomena about liquid steel in tundish were studied. The results show that the configuration and operation of tundish play an important part in quality assurance of grade 20 carbon-steel products. By optimizing the configuration of the tundish, the depth of liquid bath in tundish is enhanced, the impact of liquid steel is decreased, and the residence time of liquid steel is lengthened, which is useful for eliminating inclusions and blowholes and improving the service life of tundish. Improving the pouring and tapping operation of liquid steel can avoid the contact of liquid steel with air, and decrease re-oxidation. Strict control of the superheat degree of casting liquid steel can decrease the non-metallic inclusion content of the re-oxidation in billets and reduce the erosion of tundish. The inclusions and blowholes in the continuous casting grade 20 steel billets are reduced to a great extent and qualification rate is enhanced from 60% to 80%.
基金supported by the Research Grants Council of the Hong Kong Special Administrative Region, China (Grant 623313)
文摘Fuel cells and flow batteries are promising technologies to address climate change and air pollution problems. An understanding of the complex multiscale and multiphysics transport phenomena occurring in these electrochemical systems requires powerful numerical tools. Over the past decades, the lattice Boltzmann (LB) method has attracted broad interest in the computational fluid dynamics and the numerical heat transfer communities, primarily due to its kinetic nature making it appropriate for modeling complex multiphase transport phenomena. More importantly, the LB method fits well with parallel computing due to its locality feature, which is required for large-scale engineering applications. In this article, we review the LB method for gas-liquid two-phase flows, coupled fluid flow and mass transport in porous media, and particulate flows. Examples of applications are provided in fuel cells and flow batteries. Further developments of the LB method are also outlined.
文摘The use of dendrochronology to study and date geomorphic processes in volcanic environments is still incipient, even more so on the volcanic slopes covered by temperate forests in central Mexico. Mass movements, such as debris flows, often impact forest stands where they cause damage to individual trees, thereby generating growth disturbances(GD) in the tree-ring records. The identification and dating of GD enables reconstruction of the age of trees colonizing bare surfaces after major events, but also allows the assessment of the frequency or spatial distribution of past geomorphic process activity. Here we used increment cores from 65 Pinus leiophylla, Abies religiosa, and Alnus jorullensis trees growing in the Axal gorge, on the southern slopes of La Malinche volcano, to unravel past debris-flow activity both temporally and spatially. Based on the combination of GD records, a weighted tree response index(Wit), field evidence and hydrometeorological records, we reconstructed 23 debris flows since 1933.Interestingly, almost two-thirds of the reconstructed years with debris-flow activity in Axal gorge match with events recorded in Axaltzintle gorge located on the NE slopes of La Malinche. These findings suggest a regional triggering mechanism, most likely related to the occurrence of hurricanes. This research could be useful for disaster risk management of the La Malinche National Park.