Research on the flow stability and noise reduction characteristics of quasi-periodic elastic support skin

To enhance flow stability and reduce hydrodynamic noise caused by fluctuating pressure,a quasiperiodic elastic support skin composed of flexible walls and elastic support elements is proposed for fluid noise reduction.The arrangement of the elastic support element is determined by the equivalent periodic distance and quasi-periodic coefficient.In this paper,a dynamic model of skin in a fluid environment is established.The influence of equivalent periodic distance and quasi-periodic coefficient on flow stability is investigated.The results suggest that arranging the elastic support elements in accordance with the quasi-periodic law can effectively enhance flow stability.Meanwhile,the hydrodynamic noise calculation results demonstrate that the skin exhibits excellent noise reduction performance,with reductions of 10 dB in the streamwise direction,11 dB in the spanwise direction,and 10 dB in the normal direction.The results also demonstrate that the stability analysis method can serve as a diagnostic tool for flow fields and guide the design of noise reduction structures.

SIDEWALL FLOW STABILITY IN THE MHD CHANNEL FLOWS

The velocity distribution between two sidewalls is; M-shaped for the MHD channel flows with rectangular cross section and thin conducting walls in a strong transverse magnetic field. Assume that the dimensionless numbers R(m) much less than 1, M, N much greater than 1, and sigma* much less than 1 and that the distance between two perpendicular walls is very long in comparison with the distance between two sidewalls. First, the equation for steady flow is established, and the solution of M-shaped velocity distribution is given. Then, an equation for stability of small disturbances is derived based on the velocity distribution obtained. Finally, it is proved that the stability equation for sidewall how can be transformed into the famous Orr-Sommerfeld equation, in addition, the following theorems are also proved, namely, the analogy theorem, the generalized Rayleigh's theorem, the generalized Fjortoft's theorem and the generalized Joseph's theorems.

GPU-based discrete element simulation on flow stability of flat-bottomed hopper

In this study, the flow stability of the flat-bottomed hopper was investigated via GPU-based discrete element method(DEM) simulation. With the material height inside the hopper reducing, the fluctuation of the flow rate indicates an unstable discharge. The flow regions of the unstable discharge were compared with that of the stable discharge, a key transformation zone, where the voidage showed the largest difference between unstable and stable discharge, was revealed. To identify the relevance of the key transformation zone and the hopper flow stability, the voidage variation of the key transformation zone with material height reducing was studied.A sharp increase in the voidage in the key transformation zone was considered to be the standard for judging the unstable hopper flow, and the ‘Top–Bottom effect' of the hopper was defined, which indicated the hopper flow was unstable when the hopper only had the top area and the bottom area, because the voidage of particles in the top area and the bottom area were both variables.

Stability and Drag Reduction in Transient Channel Flow of Fibre Suspension

Drag reduction features in the transition regime of channel flow with fibre suspension were analyzed in terms of the linear stability theory. The modified stability equation was obtained based on the slender-body theory and natural closure approximation. Results of the stability analysis show attenuating effects of fibre additives to the flow instability. For the cases leading to transition, drag reduction rate increases with the characteristic parameter H of fibres. The mechanism of drag reduction by fibres is revealed through the variation of velocity profile and the decrease of wall shear stress. The theoretical results are qualitatively consistent with some typical experiments.

INVESTIGATION ON THE FLOW STABILITY OF NEWTONIAN FLUID IN ECCENTRIC ANNULUS VIA THE AXIAL RECIPROCATION OF THE INNER TUBE

The governing equation, together with the formulas of the averaged flux and the stability parameter for Newtonian fluid flowing in eccentric annulus via the axial reciprocation of the inner tube was established in the bipolar coordinate system. Numerical calculation was conducted for the measurement of water flow using the formulas above, of which the results agree well with the experimental data. It is shown that the flow instability can be induced by the increase of the stroke, the frequency, and the eccentricity of annulus, making the sucker rod more susceptible to partial abrasion. Some protecting methods, including adding centralizers, adjusting the stroke and frequency, are proposed to protect the sucker rod from the partial abrasion, and satisfactory results have been achieved in the oilfields.

ANALYSIS OF EDL EFFECTS ON THE FLOW AND FLOW STABILITY IN MICROCHANNELS

The effects of the Electrical Double Layer （EDL） on the liquid mean flow and the flow stability in microchannels are investigated by solving the Poisson-Boltzmann equation. The models of the traditional streaming Electrical Current Balance （ECB） and the newly introduced streaming Electrical Current Density Balance （ECDB） are applied to determine the electrical streaming current. The numerical results show that the electrical streaming current backflow in the ECB model near the wall can be removed by using the ECDB model, which is suitable to study the effects of the EDL on the mean flow and the flow stability in microchannels. The flow is found more unstable if the ECDB model is applied.

STABILITY ANALYSIS IN SPATIAL MODE FOR CHANNEL FLOW OF FIBER SUSPENSIONS

Different from previous temporal evolution assumption, the spatially growing mode was employed to analyze the linear stability for the channel flow of fiber suspensions. The stability equation applicable to fiber suspensions was established and solutions for a wide range of Reynolds number and angular frequency were given numerically . The results show that, the flow instability is governed by a parameter H which represents a ratio between the axial stretching resistance of fiber and the inertial force of the fluid. An increase of H leads to a raise of the critical Reynolds number, a decrease of corresponding wave number, a slowdown of the decreasing of phase velocity , a growth of the spatial attenuation rate and a diminishment of the peak value of disturbance velocity. Although the unstable region is reduced on the whole, long wave disturbances are susceptible to fibers.

Two Phase Flow Stability in the HTR-10 Steam Generator

A 10MW High Temperature Gas Cooled Reactor (HTR-10) designed by the Institute of Nuclear Energy Technology (INET) is now being constructed. The steam generator (SG) in the HTR-10 is one of the most important components for reactor safety. The thermal-hydraulic performance of the SG was investigated. A full scale HTR-10 Steam Generator Two Tube Engineering Model Test Facility (SGTM-10) was installed and tested at INET. This paper describes the SGTM-10 thermal hydraulic experimental system in detail. The SGTM-10 simulates the actual thermal and structural parameters of the HTR-10. The SGTM-10 includes three separated loops: the primary helium loop, the secondary water loop, and the tertiary cooling water loop. Two parallel tubes are arranged in the test assembly. The main experimental equipment is shown in the paper. Expermental results are given illustrating the effects of the outlet pressures, the heating power, and the inlet subcooling.

Discussion on Stability Criterion of Inviscid Compressible Swirling Flow

The stability condition for compressible and incompressible swirling flow is discussed and compared. It is found that Eckhoff and Storesletten's necessary condition for stability of inviscid compressible swirling flow seems incorrect.

THE LOSS OF STABILITY OF LAMINAR FLOW IN OPEN CHANNEL AND THE MECHANISM OF SAND RIPPLE FORMATION

In the flow on a mobile bed in an open channel, sand ripple often appears after the sediment begins to move. Different scholars have different views on the formation of sand ripples. This paper holds that as the ripple in general is very small, its formation is due to the instability of the laminar flow or the evolution of the small-scale coherent structures in the sublayer adjacent to the wall of the open channel. When the shear stresses caused by the disturbing waves or the coherent structure near the bed surface boundary and the water flow itself are greater than the shields stresses, responses on the bed surface appear and the sand ripple forms. If the frequency of the shear stress caused by the disturbance is close to the natural frequency of the sand grains that produced resonance, such a phenomenon is called the 'detection property' of the sediment. It is at this point that the maximum resonance appears and the sand ripple develops rapidly.

MHD Stability Analysis and Flow Controls of Liquid Metal Free Surface Film Flows as Fusion Reactor PFCs

Numerical and experimental investigation results on the magnetohydrodynamics（MHD） film flows along flat and curved bottom surfaces are summarized in this study. A simplified modeling has been developed to study the liquid metal MHD film state, which has been validated by the existing experimental results. Numerical results on how the inlet velocity（V）, the chute width（W） and the inlet film thickness（d0） affect the MHD film flow state are obtained. MHD stability analysis results are also provided in this study. The results show that strong magnetic fields make the stable V decrease several times compared to the case with no magnetic field,especially small radial magnetic fields（Bn） will have a significant impact on the MHD film flow state. Based on the above numerical and MHD stability analysis results flow control methods are proposed for flat and curved MHD film flows. For curved film flow we firstly proposed a new multi-layers MHD film flow system with a solid metal mesh to get the stable MHD film flows along the curved bottom surface. Experiments on flat and curved MHD film flows are also carried out and some firstly observed results are achieved.

Effects of shear-thinning/thickening nature on the stability of Couette-like flow with uniform crossflow

The linear stability of wall-injected pressure- driven Couette-like flow in power-law fluids is studied. Previous study on this kind of flow for Newtonian fluids by Nicoud and Angilella [Phys. Rev. E 56, 3000 （1997）] was extended to power-law fluids to understand the effects of shear-thinning/thickening nature on the flow stability. A related expression between the critical crossflow Reynolds number for Newtonian fluids and that for power-law fluids is obtained as the streamwise Reynolds number is large enough based on numerical computations, and verified theoretically in the case of a limiting condition with the power-law index.

ON THE STABILITY OF DISTORTED LAMINAR FLOW(Ⅱ)——THE LINEAR STABILITY ANALYSIS OF DISTORTED PARALLEL SHEAR FLOW

Based on the hydrodynamic stability theory of distorted laminar flow and the kind of distortion profiles on the mean velocity in parallel shear flow given in paper [1], this paper investigates the linear stability behaviour of parallel shear flow, presents unstable results of plane Couette flow and pipe Poiseuille flow to two-dimensional or axisymmetric disturbances for the first time, and obtains neutral curves of these two motions under certain definition.

Establishment of infinite dimensional Hamiltonian system of multilayer quasi-geostrophic flow & study on its linear stability

A multilayer flow is a stratified fluid composed of a finite number of layers with densities homogeneous within one layer but different from each other. It is an intermediate system between the single-layer barotropic model and the continuously stratified baroclinic model. Since this system can simulate the baroclinic effect simply, it is widely used to study the large-scale dynamic process in atmosphere and ocean. The present paper is concerned with the linear stability of the multilayer quasi-geostrophic flow, and the associated linear stability criteria are established. Firstly, the nonlinear model is turned into the form of a Hamiltonian system, and a basic flow is defined. But it cannot be an extreme point of the Hamiltonian function since the system is an infinite-dimensional one. Therefore, it is necessary to reconstruct a new Hamiltonian function so that the basic flow becomes an extreme point of it. Secondly, the linearized equations of disturbances in the multilayer quasi-geostrophic flow are derived by introducing infinitesimal disturbances superposed on the basic flows. Finally, the properties of the linearized system are discussed, and the linear stability criteria in the sense of Liapunov are derived under two different conditions with respect to certain norms.

ON THE STABILITY OF DISTORTED LAMINAR FLOW(Ⅲ)—THE NONLINEAR STABILITY ANALYSIS OF DISTORTED PARALLEL SHEAR FLOW

Based on the hydrodynamic stability theory of distorted laminar flow and the kind of distortion profiles on the mean velocity in parallel shear flow given in paper [1], this paper investigates the nonlinear stability behaviour of parallel shear flow, carries on stability calculation taking account of the perturbations of background turbulence noise under certain assumption, and obtains some results in accordance qualitatively with those of experiment for plane Poiseuille flow and pipe Poiseuille flow.

ON THE STABILITY OF DISTORTED LAMINAR FLOW(Ⅰ)—BASIC IDEAS AND THEORY

This paper suggests a hydrodynamic stability theory of distorted laminar flow, and presents a kind of distortion profile of mean velocity in parallel shear flow. With such distortion profiles, the new theory can be used to investigate the stability behaviour of parallel shear flow, and thus suggests a new possible approach to instability.

THE NONLINEAR STABILITY OF PLANE POISEUILLE FLOW FOR NON－NEWTONIAN POWER SERIES FLUID

Non-Newtonan fluid is a kind of fluid whose components of stresstensor aren’t theliear funtions of compoents of the strain rate tensor.Non-Newtonianfluid is beingprocessed in many kinds of modern industry,Stability of flows for Non- Newtonianfluid is of important applicatuib,In this article we calculate subcritical thrdshold of flow which oecurs in polymer-processing when the melting substance is driven throughtwo parallel fixed boundaries.

EFFECT OF AXIAL SPACING ON COMPRESSOR STABILITY

Experimental studies are carried out at a low speed axial compressor with five different rotor/stator gaps. Analysis of the effect of axial spacing of two successive blade rows on the measured mean flow coefficient at stall inception and on the flow range of compressor under multi-cell rotating stall operating conditions proves that the stator can suppress the flow disturbance in the compressor and strengthen the stability of the compressor. Experimental data show that the stall flow coefficient decreases by reducing the axial spacing of successive blade rows. Moreover, by reducing the axial spacing, the stall pattern transition pace from multi-cell stall to single-cell stall can be shifted. And the compressor directly slips into single-cell stall at 21.0% CR axial spacing. By analyzing the pressure fluctuation closed to the surge line, it can be known that there exists an eigenfrequency where the amplitude of the oscillating pressure suddenly and dramatically increases as the compressor runs close to the surge line and this pressure disturbance is relevant to the compressor instability.

Lane changing analysis for two-lane traffic flow

In this paper, the two-lane traffic are studied by using the lane-changing rules in the car-following models. The simulation show that the frequent lane changing occurs when the lateral distance in car following activities is considered and it gives rise to oscillating waves. In contrast, if the lateral distance is not considered （or considered occasionally）, the lane changing appears infrequently and soliton waves occurs. This implies that the stabilization mechanism no longer functions when the lane changing is permitted. Since the oscillating and soliton waves correspond to the unstable and metastable flow regimes, respectively, our study verifies that a phase transition may occur as a result of the lane changing.

Multiple solutions and stability of the steady transonic small-disturbance equation

Numerical solutions of the steady transonic small-disturbance（TSD） potential equation are computed using the conservative Murman-Cole scheme. Multiple solutions are discovered and mapped out for the Mach number range at zero angle of attack and the angle of attack range at Mach number 0.85 for the NACA 0012 airfoil. We present a linear stability analysis method by directly assembling and evaluating the Jacobian matrix of the nonlinear finite-difference equation of the TSD equation. The stability of all the discovered multiple solutions are then determined by the proposed eigen analysis. The relation of stability to convergence of the iterative method for solving the TSD equation is discussed. Computations and the stability analysis demonstrate the possibility of eliminating the multiple solutions and stabilizing the remaining unique solution by adding a sufficiently long splitter plate downstream the airfoil trailing edge. Finally, instability of the solution of the TSD equation is shown to be closely connected to the onset of transonic buffet by comparing with experimental data.