Combining the detached eddy simulation(DES)method and Ffowcs Williams-Hawkings(FW-H)equation,the effect of bogie cavity end wall inclination on the flow field and aerodynamic noise in the bogie region is numerically s...Combining the detached eddy simulation(DES)method and Ffowcs Williams-Hawkings(FW-H)equation,the effect of bogie cavity end wall inclination on the flow field and aerodynamic noise in the bogie region is numerically studied.First,the simulation is conducted based on a simplified cavity-bogie model,including five cases with different inclination angles of the front and rear walls of the cavity.By comparing and analyzing the flow field and acoustic results of the five cases,the influence of the regularity and mechanism of the bogie cavity end wall inclination on the flow field and the aerodynamic noise of the bogie region are revealed.Then,the noise reduction strategy determined by the results of the simplified cavity-bogie model is applied to a three-car marshaling train model to verify its effectiveness when applied to the real train.The results reveal that the forward inclination of the cavity front wall enlarges the influence area of shear vortex structures formed at the leading edge of the cavity and intensifies the interaction between the vortex structures and the front wheelset,frontmotor,and front gearbox,resulting in the increase of the aerodynamic noise generated by the bogie itself.The backward inclination of the cavity rear wall is conducive to guiding the vortex structures flow out of the cavity and weakening the interaction between the shear vortex structures and the cavity rear wall,leading to the reduction of the aerodynamic noise generated by the bogie cavity.Inclining the rear end wall of the foremost bogie cavity of the head car is a feasible aerodynamic noise reduction measure for high-speed trains.展开更多
Prevention and control measures of spontaneous combustion of coal and gas accumulation in a goaf require an accurate description of its gas flow state.However,the commonly used fluid dynamics in porous media is not su...Prevention and control measures of spontaneous combustion of coal and gas accumulation in a goaf require an accurate description of its gas flow state.However,the commonly used fluid dynamics in porous media is not suitable for the new-born goaf with fracture cavity combination,multi-scale,and large blocks.In this study,we propose a cavity flow algorithm to accurately describe the gas flow state in the new-born goaf.The genetic algorithm(GA)is used to randomly generate the binary matrix of a goaf caving shape.The difference between the gas flow state calculated by the lattice Boltzmann method(LBM)and the measured data at the boundary or internal measuring points of the real goaf is taken as the GA fitness value,and the real goaf caving shape and the gas flow state are quickly addressed by GA.The experimental model of new-born goaf is established,and the laser Doppler anemometry(LDA)experiment is carried out.The results show that the Jaccard similarity coefficient between the reconstructed caving shape and the real caving shape is 0.7473,the mean square error between the calculated wind speed and the LDA-measured value is 0.0244,and the R2 coefficient is 0.8986,which verify the feasibility of the algorithm.展开更多
Heat and mass transfer of a circular-shaped porous moist object inside a two-dimensional triangle cavity is investigated by using finite element method.The porous object is considered to be a moist food sample,located...Heat and mass transfer of a circular-shaped porous moist object inside a two-dimensional triangle cavity is investigated by using finite element method.The porous object is considered to be a moist food sample,located in the middle of the cavity with inlet and outlet ports with different configurations of inlet/outlet ports.Convective drying performance is numerically assessed for different values of Reynolds numbers(between 50 and 250),dry air inlet temperature(between 40 and 80℃)and different locations of the port.It is observed that changing the port locations has significant impacts on the flow recirculaitons inside the triangular chamber while convective drying performance is highly affected.The moisture content reduces with longer time and for higher Reynolds number(Re)values.Case P4 where inlet and outlet ports are in the middle of the walls provides the most effective configuration in terms of convective drying performance while the worst case is seen for P1 case where inlet and outlet are closer to the corners of the chamber.There is a 192% difference between the moisture reduction of these two cases at Re=250,T=80℃ and t=120 min.展开更多
By coupling the non-equilibrium extrapolation scheme for boundary condition with the multi-relaxation-time lattice Boltzmann method, this paper finds that the stability of the multi-relaxation-time model can be improv...By coupling the non-equilibrium extrapolation scheme for boundary condition with the multi-relaxation-time lattice Boltzmann method, this paper finds that the stability of the multi-relaxation-time model can be improved greatly, especially on simulating high Reynolds number (Re) flow. As a discovery, the super-stability analysed by Lallemand and Luo is verified and the complex structure of the cavity flow is also exhibited in our numerical simulation when Re is high enough. To the best knowledge of the authors, the maximum of Re which has been investigated by direct numerical simulation is only around 50 000 in the literature; however, this paper can readily extend the maximum to 1000 000 with the above combination.展开更多
Supersonic flows past two-dimensional cavities with/without control are investigated by the direct numerical simulation (DNS). For an uncontrolled cavity, as the thickness of the boundary layer declines, transition ...Supersonic flows past two-dimensional cavities with/without control are investigated by the direct numerical simulation (DNS). For an uncontrolled cavity, as the thickness of the boundary layer declines, transition of the dominant mode from the steady mode to the Rossiter Ⅱ mode and then to the Rossiter III mode is observed due to the change of vortex-corner interactions. Meanwhile, a low frequency mode appears. However, the wake mode observed in a subsonic cavity flow is absent in the current simulation. The oscillation frequencies obtained from a global dynamic mode decomposition (DMD) approach are consistent with the local power spectral density (PSD) analysis. The dominant mode transition is clearly shown by the dynamic modes obtained from the DMD. A passive control technique of substituting the cavity trailing edge with a quarter-circle is studied. As the effective cavity length increases, the dominant mode transition from the Rossiter Ⅱ mode to the Rossiter Ⅲ mode occurs. With the control, the pressure oscillations are reduced significantly. The interaction of the shear layer and the recirculation zone is greatly weakened, combined with weaker shear layer instability, responsible for the suppression of pressure oscillations. Moreover, active control using steady subsonic mass injection upstream of a cavity leading edge can stabilize the flow.展开更多
The reduced-order model (ROM) for the two-dimensional supersonic cavity flow based on proper orthogonal decomposition (POD) and Galerkin projection is investigated. Presently, popular ROMs in cavity flows are base...The reduced-order model (ROM) for the two-dimensional supersonic cavity flow based on proper orthogonal decomposition (POD) and Galerkin projection is investigated. Presently, popular ROMs in cavity flows are based on an isentropic assumption, valid only for flows at low or moderate Mach numbers. A new ROM is constructed involving primitive variables of the fully compressible Navier-Stokes (N-S) equations, which is suitable for flows at high Mach numbers. Compared with the direct numerical simulation (DNS) results, the proposed model predicts flow dynamics (e.g., dominant frequency and amplitude) accurately for supersonic cavity flows, and is robust. The comparison between the present transient flow fields and those of the DNS shows that the proposed ROM can capture self-sustained oscillations of a shear layer. In addition, the present model reduction method can be easily extended to other supersonic flows.展开更多
Flow induced oscillation in a cavity and its suppression by means of acoustic excitation were studied both experimentally and numerically. In the experiment it was found that with the leading edge pure tone excitation...Flow induced oscillation in a cavity and its suppression by means of acoustic excitation were studied both experimentally and numerically. In the experiment it was found that with the leading edge pure tone excitation at some frequencies and intensities. the flow-induced oscillation in the cavity could be greatly suppressed. Cavity flows both with and without acoustic excitation were studied by solving the 2-D time-dependent Reynolds averaged Navier Stokes equations using explicit predictor-corrector difference algorithm of MacCormack. Effects of turbulence were simulated via Cebeci-Smith turbulence mode with relaxation modification. The computational and experimental results are compared. and good agreement is obtained.展开更多
The pantograph and its recess on the train roof are major aerodynamic noise sources on high-speed trains.Reducing this noise is particularly important because conventional noise barriers usually do not shield the pant...The pantograph and its recess on the train roof are major aerodynamic noise sources on high-speed trains.Reducing this noise is particularly important because conventional noise barriers usually do not shield the pantograph.However,less attention has been paid to the pantograph recess compared with the pantograph.In this paper,the flow features and noise contribution of two types of noise reduction treatments rounded and chamfered edges are studied for a simplified high-speed train pantograph recess,which is represented as a rectangular cavity and numerically investigated at 1/10 scale.Improved delayed detached-eddy simulations are performed for the near-field turbulent flow simulation,and the Ffowcs Williams and Hawkings aeroacoustic analogy is used for far-field noise prediction.The highly unsteady flow over the cavity is significantly reduced by the cavity edge modifications,and consequently,the noise radiated from the cavity is reduced.Furthermore,effects of the rounded cavity edges on the flow and noise of the pantographs(one raised and one folded)are investigated by comparing the flow features and noise contributions from the cases with and without rounding of the cavity edges.Different train running directions are also considered.Flow analysis shows that the highly unsteady flow within the cavity is reduced by rounding the cavity edges and a slightly lower flow speed occurs around the upper parts of the raised pantograph,whereas the flow velocity in the cavity is slightly increased by the rounding.Higher pressure fluctuations occur on the folded pantograph and the lower parts of the raised pantograph,whereas weaker fluctuations are found on the panhead of the raised pantograph.This study shows that by rounding the cavity edges,a reduction in radiated noise at the side and the top receiver positions can be achieved.Noise reductions in the other directions can also be found.展开更多
An experimental study of cavity oscillating flow carried out on subsonic wall jet facilities in an anechoic room is summarized. The jet exit Mach number range is from 0.2 to 0.8. The effects of the flow Mach number (...An experimental study of cavity oscillating flow carried out on subsonic wall jet facilities in an anechoic room is summarized. The jet exit Mach number range is from 0.2 to 0.8. The effects of the flow Mach number ( Ma ) and the cavity depth ( D ) on the oscillation are studied. It is found that for L/D =4, (shallow cavity), the oscillation is mainly due to the self exciting of the free shear layer above the cavity opening, for L/D =2, the acoustic resonance is responsible for the oscillation. Preliminary tests are performed to study the suppression effect of the leading edge tone excitation on cavity flow, and considerable reduction of oscillation has been achieved when Ma ≤0.6.展开更多
A streamline upwind/Petrov-Galerkin (SUPG) finite element method based on a penalty function is pro- posed for steady incompressible Navier-Stokes equations. The SUPG stabilization technique is employed for the for-...A streamline upwind/Petrov-Galerkin (SUPG) finite element method based on a penalty function is pro- posed for steady incompressible Navier-Stokes equations. The SUPG stabilization technique is employed for the for- mulation of momentum equations. Using the penalty function method, the continuity equation is simplified and the pres- sure of the momentum equations is eliminated. The lid-driven cavity flow problem is solved using the present model. It is shown that steady flow simulations are computable up to Re = 27500, and the present results agree well with previous solutions. Tabulated results for the properties of the primary vortex are also provided for benchmarking purposes.展开更多
Near space has been paid more and more attentionin recent years due to its military application value.However,flow characteristics of some fundamental configurations(e.g.,the cavity)in near space have rarely been inve...Near space has been paid more and more attentionin recent years due to its military application value.However,flow characteristics of some fundamental configurations(e.g.,the cavity)in near space have rarely been investigated due to rarefied gas effects,which make the numerical simulation methods based on continuous flow hypothesis lose validity.In this work,the direct simulation Monte Carlo(DSMC),one of the most successful particle simulation methods in treating rarefied gas dynamics,is employed to explore flow characteristics of a hypersonic cavity with sweepback angle in near space by considering a variety of cases,such as the cavity at a wide range of altitudes 20-60 km,the cavity at freestream Mach numbers of 6-20,and the cavity with a sweepback angle of 30°-90°.By analyzing the simulation results,flow characteristics are obtained and meanwhile some interesting phenomena are also found.The primary recirculation region,which occupies the most area of the cavity,causes pressure and temperature stratification due to rotational motion of fluid inside it,whereas the pressure and temperature in the secondary recirculation region,which is a small vortex and locates at the lower left corner of the cavity,change slightly due to low-speed movement of fluid inside it.With the increase of altitude,both the primary and secondary recirculation regions contract greatly and it causes them to separate.A notable finding is that rotation direction of the secondary recirculation region would be reversed at a higher altitude.The overall effect of increasing the Mach number is that the velocity,pressure,and temperature within the cavity increase uniformly.The maximum pressure nearby the trailing edge of the cavity decreases rapidly as the sweepback angle increases,whereas the influence of sweepback angle on velocity distribution and maximum temperature within the cavity is slight.展开更多
To date,there are very few studies on the transition beyond second Hopf bifurcation in a lid-driven square cavity,due to the difficulties in theoretical analysis and numerical simulations.In this paper,we study the ch...To date,there are very few studies on the transition beyond second Hopf bifurcation in a lid-driven square cavity,due to the difficulties in theoretical analysis and numerical simulations.In this paper,we study the characteristics of the third Hopf bifurcation in a driven square cavity by applying a consistent fourth-order compact finite difference scheme rectently developed by us.We numerically identify the critical Reynolds number of the third Hopf bifurcation located in the interval of(13944.7021,13946.5333)by the method of bisection.Through Fourier analysis,it is discovered that the flow becomes chaotic with a characteristic of period-doubling bifurcation when the Reynolds number is beyond the third bifurcation critical interval.Nonlinear time series analysis further ascertains the flow chaotic behaviors via the phase diagram,Kolmogorov entropy and maximal Lyapunov exponent.The phase diagram changes interestingly from a closed curve with self-intersection to an unclosed curve and the attractor eventually becomes strange when the flow becomes chaotic.展开更多
Based on finite volume method, subsonic and transonic flow in 3-D cavity of different length-to-depth ratios are numerically investigated by using Navier-Stokes equations with k-ε SST two-equation turbulence model an...Based on finite volume method, subsonic and transonic flow in 3-D cavity of different length-to-depth ratios are numerically investigated by using Navier-Stokes equations with k-ε SST two-equation turbulence model and coupled implicit algorithm. The cavity streamline patterns and the static pressure coefficient distributions on the cavity floor are shown, and the flow characteristics of the cavity and the floor pressure coefficient distributions are analyzed. Numerical results demon- strate that the flow characteristics of the cavity at subsonic and transonic speeds are different from that of supersonic ones; length-to-depth ratio is the main factor that affects the flow characteristics of the cavity at subsonic and transonic number has a neglectable effect on the cavity floor pressure distributions. speeds and causes changes of the cavity flow type; Mach cavity flow fields at subsonic and transonic speeds and the展开更多
To study the airflow distribution in human nasal cavity during respiration and the characteristic parameters for nasal structure, thirty three-dimensional, anatomically accurate representations of adult nasal cavity m...To study the airflow distribution in human nasal cavity during respiration and the characteristic parameters for nasal structure, thirty three-dimensional, anatomically accurate representations of adult nasal cavity models were reconstructed based on processed tomography images collected from normal people. The airflow fields in nasal cavities were simulated using the fluid dynamics with the finite element software ANSYS. The results showed that the difference of human nasal cavity structure led to varying airflow distribution in the nasal cavities and the main airflow passed through the common nasal meatus. The nasal resistance in the regions of nasal valve and nasal vestibule accounted for more than a half of overall resistance. The characteristic model of nasal cavity was extracted based on the characteristic points and dimensions deducted from the original models. It showed that either the geometric structure or the air-flow field of the two kinds of model was similar. The characteristic dimensions were the characteristic parameters of nasal cavity that properly represented the original model in research for nasal cavity.展开更多
The calculation sequence of collision, propagation and macroscopic variables is not very clear in lattice Boltzmann method (LBM) code implementation. According to the definition, three steps should be computed on all ...The calculation sequence of collision, propagation and macroscopic variables is not very clear in lattice Boltzmann method (LBM) code implementation. According to the definition, three steps should be computed on all nodes respectively, which mean three loops are needed. While the “pull” scheme makes the only one loop possible for coding, this is called semi-implicit scheme in this study. The accuracy and efficiency of semi-implicit scheme are discussed in detail through the simulation of lid-driven cavity flow. Non-equilibrium extrapolation scheme is adopted on the boundary of simulation area. The results are compared with two classic articles, which show that semi-implicit scheme has good agreement with the classic scheme. When Re is less than 3000, the iterations steps of semi-scheme can be decreased by about 30% though comparing the semi-implicit scheme with standard scheme containing three loops. As the Re increases into more than 3400, the standard scheme is not converged. On the contrary, the iterations of semi-implicit scheme are approximately linear to Re.展开更多
In this experiment, the effects of the combination of jets or rods and a porous cavity on the supersonic flow field are studied by means of visualization of schlieren method and the measurements of wall static pressur...In this experiment, the effects of the combination of jets or rods and a porous cavity on the supersonic flow field are studied by means of visualization of schlieren method and the measurements of wall static pressures and the flow direction in the cavity with the thermal tuft probe. Three cases of jets or rods arrangements are tested in the experiments. As a result, a bow shock wave which is generated by the jets or rods is observed by mean of schlieren method. And it is confirmed that the expansion region appears downstream of the rods but is not in case of the jets pattern. Moreover the pressure ratios of starting shock wave passing through porous cavity for jets pattern differ from that of rods pattern. In the cavity, the flow direction at the measurement position in the cavity is always opposite to the main flow, as long as the starting shock wave is located upstream of the porous cavity for all cases. Difference in the backward flow ratio between the jets and rods patterns is observe after the starting shock wave passes through the porous cavity.展开更多
Employing Rayleigh's method, the collapse of a vaporous bubble in an incompressible liquid with surface tension is analysed. The expressions of time versus radius, bubble-wall velocity and pressure developed at co...Employing Rayleigh's method, the collapse of a vaporous bubble in an incompressible liquid with surface tension is analysed. The expressions of time versus radius, bubble-wall velocity and pressure developed at collapse are thus introduced.Finally, the numerical solution of velocity and pressure field in the liquid surrounding the cavity is also given.展开更多
The fractional volumetric lattice Boltzmann method with much better stability was used to simulate two-dimensional cavity flows. Because the effective viscosity was reduced by the fraction factor, it is very effective...The fractional volumetric lattice Boltzmann method with much better stability was used to simulate two-dimensional cavity flows. Because the effective viscosity was reduced by the fraction factor, it is very effective for simulating high Reynolds number flows. Simulations were carried out on a uniform grids system. The stream lines and the velocity profiles obtained from the simulations agree well with the standard lattice Boltzmann method simulations. Comparisons of detailed flow patterns with other studies via location of vortex centers are also satisfactory.展开更多
基金supported by National Natural Science Foundation of China(12172308)National Key Research and Development Program of China(2020YFA0710902).
文摘Combining the detached eddy simulation(DES)method and Ffowcs Williams-Hawkings(FW-H)equation,the effect of bogie cavity end wall inclination on the flow field and aerodynamic noise in the bogie region is numerically studied.First,the simulation is conducted based on a simplified cavity-bogie model,including five cases with different inclination angles of the front and rear walls of the cavity.By comparing and analyzing the flow field and acoustic results of the five cases,the influence of the regularity and mechanism of the bogie cavity end wall inclination on the flow field and the aerodynamic noise of the bogie region are revealed.Then,the noise reduction strategy determined by the results of the simplified cavity-bogie model is applied to a three-car marshaling train model to verify its effectiveness when applied to the real train.The results reveal that the forward inclination of the cavity front wall enlarges the influence area of shear vortex structures formed at the leading edge of the cavity and intensifies the interaction between the vortex structures and the front wheelset,frontmotor,and front gearbox,resulting in the increase of the aerodynamic noise generated by the bogie itself.The backward inclination of the cavity rear wall is conducive to guiding the vortex structures flow out of the cavity and weakening the interaction between the shear vortex structures and the cavity rear wall,leading to the reduction of the aerodynamic noise generated by the bogie cavity.Inclining the rear end wall of the foremost bogie cavity of the head car is a feasible aerodynamic noise reduction measure for high-speed trains.
基金This work was supported by the Natural Science Foundation of China(Nos.51774169 and 51574142)the National Key Research and Development Program of China(No.2017YFC0804401).
文摘Prevention and control measures of spontaneous combustion of coal and gas accumulation in a goaf require an accurate description of its gas flow state.However,the commonly used fluid dynamics in porous media is not suitable for the new-born goaf with fracture cavity combination,multi-scale,and large blocks.In this study,we propose a cavity flow algorithm to accurately describe the gas flow state in the new-born goaf.The genetic algorithm(GA)is used to randomly generate the binary matrix of a goaf caving shape.The difference between the gas flow state calculated by the lattice Boltzmann method(LBM)and the measured data at the boundary or internal measuring points of the real goaf is taken as the GA fitness value,and the real goaf caving shape and the gas flow state are quickly addressed by GA.The experimental model of new-born goaf is established,and the laser Doppler anemometry(LDA)experiment is carried out.The results show that the Jaccard similarity coefficient between the reconstructed caving shape and the real caving shape is 0.7473,the mean square error between the calculated wind speed and the LDA-measured value is 0.0244,and the R2 coefficient is 0.8986,which verify the feasibility of the algorithm.
文摘Heat and mass transfer of a circular-shaped porous moist object inside a two-dimensional triangle cavity is investigated by using finite element method.The porous object is considered to be a moist food sample,located in the middle of the cavity with inlet and outlet ports with different configurations of inlet/outlet ports.Convective drying performance is numerically assessed for different values of Reynolds numbers(between 50 and 250),dry air inlet temperature(between 40 and 80℃)and different locations of the port.It is observed that changing the port locations has significant impacts on the flow recirculaitons inside the triangular chamber while convective drying performance is highly affected.The moisture content reduces with longer time and for higher Reynolds number(Re)values.Case P4 where inlet and outlet ports are in the middle of the walls provides the most effective configuration in terms of convective drying performance while the worst case is seen for P1 case where inlet and outlet are closer to the corners of the chamber.There is a 192% difference between the moisture reduction of these two cases at Re=250,T=80℃ and t=120 min.
基金Project supported by the National Natural Science Foundation of China (Grant No 70271069).
文摘By coupling the non-equilibrium extrapolation scheme for boundary condition with the multi-relaxation-time lattice Boltzmann method, this paper finds that the stability of the multi-relaxation-time model can be improved greatly, especially on simulating high Reynolds number (Re) flow. As a discovery, the super-stability analysed by Lallemand and Luo is verified and the complex structure of the cavity flow is also exhibited in our numerical simulation when Re is high enough. To the best knowledge of the authors, the maximum of Re which has been investigated by direct numerical simulation is only around 50 000 in the literature; however, this paper can readily extend the maximum to 1000 000 with the above combination.
基金supported by the National Natural Science Foundation of China(Nos.11232011 and11402262)the 111 Project of China(No.B07033)+1 种基金the China Postdoctoral Science Foundation(No.2014M561833)the Fundamental Research Funds for the Central Universities
文摘Supersonic flows past two-dimensional cavities with/without control are investigated by the direct numerical simulation (DNS). For an uncontrolled cavity, as the thickness of the boundary layer declines, transition of the dominant mode from the steady mode to the Rossiter Ⅱ mode and then to the Rossiter III mode is observed due to the change of vortex-corner interactions. Meanwhile, a low frequency mode appears. However, the wake mode observed in a subsonic cavity flow is absent in the current simulation. The oscillation frequencies obtained from a global dynamic mode decomposition (DMD) approach are consistent with the local power spectral density (PSD) analysis. The dominant mode transition is clearly shown by the dynamic modes obtained from the DMD. A passive control technique of substituting the cavity trailing edge with a quarter-circle is studied. As the effective cavity length increases, the dominant mode transition from the Rossiter Ⅱ mode to the Rossiter Ⅲ mode occurs. With the control, the pressure oscillations are reduced significantly. The interaction of the shear layer and the recirculation zone is greatly weakened, combined with weaker shear layer instability, responsible for the suppression of pressure oscillations. Moreover, active control using steady subsonic mass injection upstream of a cavity leading edge can stabilize the flow.
基金Project supported by the National Natural Science Foundation of China(Nos.11232011,11402262,11572314,and 11621202)
文摘The reduced-order model (ROM) for the two-dimensional supersonic cavity flow based on proper orthogonal decomposition (POD) and Galerkin projection is investigated. Presently, popular ROMs in cavity flows are based on an isentropic assumption, valid only for flows at low or moderate Mach numbers. A new ROM is constructed involving primitive variables of the fully compressible Navier-Stokes (N-S) equations, which is suitable for flows at high Mach numbers. Compared with the direct numerical simulation (DNS) results, the proposed model predicts flow dynamics (e.g., dominant frequency and amplitude) accurately for supersonic cavity flows, and is robust. The comparison between the present transient flow fields and those of the DNS shows that the proposed ROM can capture self-sustained oscillations of a shear layer. In addition, the present model reduction method can be easily extended to other supersonic flows.
文摘Flow induced oscillation in a cavity and its suppression by means of acoustic excitation were studied both experimentally and numerically. In the experiment it was found that with the leading edge pure tone excitation at some frequencies and intensities. the flow-induced oscillation in the cavity could be greatly suppressed. Cavity flows both with and without acoustic excitation were studied by solving the 2-D time-dependent Reynolds averaged Navier Stokes equations using explicit predictor-corrector difference algorithm of MacCormack. Effects of turbulence were simulated via Cebeci-Smith turbulence mode with relaxation modification. The computational and experimental results are compared. and good agreement is obtained.
基金This research project has been supported by the Iridis 4 and Lyceum High Performance Computing Facility at the University of Southampton.
文摘The pantograph and its recess on the train roof are major aerodynamic noise sources on high-speed trains.Reducing this noise is particularly important because conventional noise barriers usually do not shield the pantograph.However,less attention has been paid to the pantograph recess compared with the pantograph.In this paper,the flow features and noise contribution of two types of noise reduction treatments rounded and chamfered edges are studied for a simplified high-speed train pantograph recess,which is represented as a rectangular cavity and numerically investigated at 1/10 scale.Improved delayed detached-eddy simulations are performed for the near-field turbulent flow simulation,and the Ffowcs Williams and Hawkings aeroacoustic analogy is used for far-field noise prediction.The highly unsteady flow over the cavity is significantly reduced by the cavity edge modifications,and consequently,the noise radiated from the cavity is reduced.Furthermore,effects of the rounded cavity edges on the flow and noise of the pantographs(one raised and one folded)are investigated by comparing the flow features and noise contributions from the cases with and without rounding of the cavity edges.Different train running directions are also considered.Flow analysis shows that the highly unsteady flow within the cavity is reduced by rounding the cavity edges and a slightly lower flow speed occurs around the upper parts of the raised pantograph,whereas the flow velocity in the cavity is slightly increased by the rounding.Higher pressure fluctuations occur on the folded pantograph and the lower parts of the raised pantograph,whereas weaker fluctuations are found on the panhead of the raised pantograph.This study shows that by rounding the cavity edges,a reduction in radiated noise at the side and the top receiver positions can be achieved.Noise reductions in the other directions can also be found.
文摘An experimental study of cavity oscillating flow carried out on subsonic wall jet facilities in an anechoic room is summarized. The jet exit Mach number range is from 0.2 to 0.8. The effects of the flow Mach number ( Ma ) and the cavity depth ( D ) on the oscillation are studied. It is found that for L/D =4, (shallow cavity), the oscillation is mainly due to the self exciting of the free shear layer above the cavity opening, for L/D =2, the acoustic resonance is responsible for the oscillation. Preliminary tests are performed to study the suppression effect of the leading edge tone excitation on cavity flow, and considerable reduction of oscillation has been achieved when Ma ≤0.6.
基金the National Natural Science Foundation of China (Grants 41372301 and 51349011)the Preeminent Youth Talent Project of Southwest University of Science and Technology (Grant 13zx9109)
文摘A streamline upwind/Petrov-Galerkin (SUPG) finite element method based on a penalty function is pro- posed for steady incompressible Navier-Stokes equations. The SUPG stabilization technique is employed for the for- mulation of momentum equations. Using the penalty function method, the continuity equation is simplified and the pres- sure of the momentum equations is eliminated. The lid-driven cavity flow problem is solved using the present model. It is shown that steady flow simulations are computable up to Re = 27500, and the present results agree well with previous solutions. Tabulated results for the properties of the primary vortex are also provided for benchmarking purposes.
基金Project partly supported by the National Natural Science Foundation of China(Grant No.11802264)the Natural Science Foundation of Jiangsu Province,China(Grant No.BK20180896)。
文摘Near space has been paid more and more attentionin recent years due to its military application value.However,flow characteristics of some fundamental configurations(e.g.,the cavity)in near space have rarely been investigated due to rarefied gas effects,which make the numerical simulation methods based on continuous flow hypothesis lose validity.In this work,the direct simulation Monte Carlo(DSMC),one of the most successful particle simulation methods in treating rarefied gas dynamics,is employed to explore flow characteristics of a hypersonic cavity with sweepback angle in near space by considering a variety of cases,such as the cavity at a wide range of altitudes 20-60 km,the cavity at freestream Mach numbers of 6-20,and the cavity with a sweepback angle of 30°-90°.By analyzing the simulation results,flow characteristics are obtained and meanwhile some interesting phenomena are also found.The primary recirculation region,which occupies the most area of the cavity,causes pressure and temperature stratification due to rotational motion of fluid inside it,whereas the pressure and temperature in the secondary recirculation region,which is a small vortex and locates at the lower left corner of the cavity,change slightly due to low-speed movement of fluid inside it.With the increase of altitude,both the primary and secondary recirculation regions contract greatly and it causes them to separate.A notable finding is that rotation direction of the secondary recirculation region would be reversed at a higher altitude.The overall effect of increasing the Mach number is that the velocity,pressure,and temperature within the cavity increase uniformly.The maximum pressure nearby the trailing edge of the cavity decreases rapidly as the sweepback angle increases,whereas the influence of sweepback angle on velocity distribution and maximum temperature within the cavity is slight.
基金Project supported by the National Natural Science Foundation of China(Grant No.12162001)the Natural Science Foundation of Ningxia(Grant No.2019AAC03129)the Construction Project of First-Class Disciplines in Ningxia Higher Education(Grant No.NXYLXK2017B09)。
文摘To date,there are very few studies on the transition beyond second Hopf bifurcation in a lid-driven square cavity,due to the difficulties in theoretical analysis and numerical simulations.In this paper,we study the characteristics of the third Hopf bifurcation in a driven square cavity by applying a consistent fourth-order compact finite difference scheme rectently developed by us.We numerically identify the critical Reynolds number of the third Hopf bifurcation located in the interval of(13944.7021,13946.5333)by the method of bisection.Through Fourier analysis,it is discovered that the flow becomes chaotic with a characteristic of period-doubling bifurcation when the Reynolds number is beyond the third bifurcation critical interval.Nonlinear time series analysis further ascertains the flow chaotic behaviors via the phase diagram,Kolmogorov entropy and maximal Lyapunov exponent.The phase diagram changes interestingly from a closed curve with self-intersection to an unclosed curve and the attractor eventually becomes strange when the flow becomes chaotic.
文摘Based on finite volume method, subsonic and transonic flow in 3-D cavity of different length-to-depth ratios are numerically investigated by using Navier-Stokes equations with k-ε SST two-equation turbulence model and coupled implicit algorithm. The cavity streamline patterns and the static pressure coefficient distributions on the cavity floor are shown, and the flow characteristics of the cavity and the floor pressure coefficient distributions are analyzed. Numerical results demon- strate that the flow characteristics of the cavity at subsonic and transonic speeds are different from that of supersonic ones; length-to-depth ratio is the main factor that affects the flow characteristics of the cavity at subsonic and transonic number has a neglectable effect on the cavity floor pressure distributions. speeds and causes changes of the cavity flow type; Mach cavity flow fields at subsonic and transonic speeds and the
文摘To study the airflow distribution in human nasal cavity during respiration and the characteristic parameters for nasal structure, thirty three-dimensional, anatomically accurate representations of adult nasal cavity models were reconstructed based on processed tomography images collected from normal people. The airflow fields in nasal cavities were simulated using the fluid dynamics with the finite element software ANSYS. The results showed that the difference of human nasal cavity structure led to varying airflow distribution in the nasal cavities and the main airflow passed through the common nasal meatus. The nasal resistance in the regions of nasal valve and nasal vestibule accounted for more than a half of overall resistance. The characteristic model of nasal cavity was extracted based on the characteristic points and dimensions deducted from the original models. It showed that either the geometric structure or the air-flow field of the two kinds of model was similar. The characteristic dimensions were the characteristic parameters of nasal cavity that properly represented the original model in research for nasal cavity.
文摘The calculation sequence of collision, propagation and macroscopic variables is not very clear in lattice Boltzmann method (LBM) code implementation. According to the definition, three steps should be computed on all nodes respectively, which mean three loops are needed. While the “pull” scheme makes the only one loop possible for coding, this is called semi-implicit scheme in this study. The accuracy and efficiency of semi-implicit scheme are discussed in detail through the simulation of lid-driven cavity flow. Non-equilibrium extrapolation scheme is adopted on the boundary of simulation area. The results are compared with two classic articles, which show that semi-implicit scheme has good agreement with the classic scheme. When Re is less than 3000, the iterations steps of semi-scheme can be decreased by about 30% though comparing the semi-implicit scheme with standard scheme containing three loops. As the Re increases into more than 3400, the standard scheme is not converged. On the contrary, the iterations of semi-implicit scheme are approximately linear to Re.
文摘In this experiment, the effects of the combination of jets or rods and a porous cavity on the supersonic flow field are studied by means of visualization of schlieren method and the measurements of wall static pressures and the flow direction in the cavity with the thermal tuft probe. Three cases of jets or rods arrangements are tested in the experiments. As a result, a bow shock wave which is generated by the jets or rods is observed by mean of schlieren method. And it is confirmed that the expansion region appears downstream of the rods but is not in case of the jets pattern. Moreover the pressure ratios of starting shock wave passing through porous cavity for jets pattern differ from that of rods pattern. In the cavity, the flow direction at the measurement position in the cavity is always opposite to the main flow, as long as the starting shock wave is located upstream of the porous cavity for all cases. Difference in the backward flow ratio between the jets and rods patterns is observe after the starting shock wave passes through the porous cavity.
文摘Employing Rayleigh's method, the collapse of a vaporous bubble in an incompressible liquid with surface tension is analysed. The expressions of time versus radius, bubble-wall velocity and pressure developed at collapse are thus introduced.Finally, the numerical solution of velocity and pressure field in the liquid surrounding the cavity is also given.
文摘The fractional volumetric lattice Boltzmann method with much better stability was used to simulate two-dimensional cavity flows. Because the effective viscosity was reduced by the fraction factor, it is very effective for simulating high Reynolds number flows. Simulations were carried out on a uniform grids system. The stream lines and the velocity profiles obtained from the simulations agree well with the standard lattice Boltzmann method simulations. Comparisons of detailed flow patterns with other studies via location of vortex centers are also satisfactory.