Supercritical Fluid Extraction of Essential Oil from Dry Rhizome of Ligusticum chuanxiong Hort and Their Characterization by GC/MS

Supercritical fluid extraction (SFE) of essential oil from dry rhizome ofLigusticum chuanxiong Hort was developed. GC/MS was used for the determination of the composition ofessential oil. Forty-four compounds were identified. The conventional extraction method wasconducted in parallel for comparison. The extracts were qualitatively compared by GC/MS. The yieldsof SFE and steam distillation-extraction were 4.16 % ( v/w) and 0.8 % ( v/w), respectively.Application of SFE of zessential oil from dry rhizome of Ligustiaan chuanxiong Hort was preferable.

Isolation and Extraction of Total Flavonoids from Epimedium Koreanum Nakai by Supercritical Fluid Extraction

In the present paper is reported the method for the isolation and extraction of total flavonoids of Epimedium Koreanum Nakai by means of supercritical fluid extraction(SFE). By examining pressure, temperature, amounts of modifier and extraction time, the optimized condition of SFE is confirmed as 30 MPa and 60 ℃, with 70% ethanol as the modifier. The samples were statically extracted for 30 min, followed by dynamic extraction for 120 min at a flow rate of 6 mL/min. The quantitative analysis of total flavonoids was performed by UV-Vis spectrophotometry. Compared with the conventional method, the SFE method is more efficient, more rapid and more friendly environmentally.

Comparison of Constituents and Insecticidal Activities of Essential Oil from Artemisia lavandulaefolia by Steam Distillation and Supercritical-CO_2 Fluid Extraction

Essential oil was extracted from Artemisia lavandulaefolia DC.by steam distillation（SD） and supercritical-CO2 fluid extraction（SFE）,respectively.The constituents of the essentil oils extracted with those two methods were analyzed by gas chromatography-mass spectrometry（GC-MS） and insecticidal activities of the essential oils were evaluated,then the results were compared to assess their biological activity.Thirty-one compounds were identified in the essential oil extracted by SD,and its main components were eucalyptol,α,α,4-trimethyl-3-cyclohexene-1-methanol and so on.Twenty-two compounds were identified for the essential oil extracted by SFE,and its main components were cyclodecene,n-hexadecanoic acid and so on.Six chemical compositions were all contained in the essential oils extracted by the two methods,i.e.,eucalyptol,α,α,4-trimethyl-3-cyclohexene-1-methanol,caryophyllene,[3aS-（3aα,3bβ,4β,7α,7aS）]-octahydro-7-methyl-3-methylene-4-（1-methylethyl）-1H-cyclopenta[1,3]cyclopropa-[1,2]benzene,nerolidol and（-）-Spathulenol.The fumigation toxicity of the essential oil obtained by means of SD to the adults of Sitophilus zeamais is significantly higher than that of the essential oil by means of SFE.The contact toxicity of the essential oil obtained by means of SFE to the adults of S.zeamais is higher than that of the essential oil obtained by means of SD,but the difference is not significant.

Supercritical Fluid Extraction of Total Flavonoids from Leaves of Acanthopanax Senticosus Harms

The herbal plant Acanthopanax Senticosus Harms is natural herb of Changbaishan in Jilin Province of China, which belongs to the Araliaceae family. As the ingredients of folk medicine, it has long been used to treat a variety of human diseases, such as cerebrovascular disease, diabetes, tumor, isochemic heart diseases, hypertension, rheumatic arthritis, etc. E2,33. Flavonoids, a class of constituent compounds, which have a broad distribution in the nature and are found in Acanthopanax Senticosus Harms, have gained particular attention. A number of studies have shown that flavonoid compounds have wide biological activities, such as anti-aging, anticancer, anti-HIV,

Supercritical Fluid Extraction of a Novel Template from Mesoporous Zirconia and the Effect on Porous Structure

Mesoporous zirconia was synthesized by a new and simple method. Zirconium n-propoxide was used as the zirconium source. A small, inexpensive nonsurfactant, triethanolamine, was used as the template. The template was removed by thermal treatment in air and supercritical fluid extraction using CO2. The structure of the resulting materials was characterized by X-ray diffraction, transmission electron microscopy, and N2 adsorption-desorption analyses. The materials are found to have narrowly distributed average pore diameters and wormhole-like pore channels. However, higher surface area and larger pore volume are exhibited after supercritical fluid extraction with CO2. The removal of the template by thermal treatment also leads to condensation and mild shrinkage of the zirconia framework.

Supercritical Fluid Extraction of Saponins from Ginseng

Introduction Ginseng（ Panax ginseng C. A. Meyer, Araliaceae） is one of the most valuable Chinese crude drugs and has been used widely for over 2000 years. Studies have demonstrated that ginseng can act on the central nervous system, the cardiovascular system and the endocrine system; it can enhance immune function and metabolism; it possesses a biomodulation action, anticancer effect, anti-stress and anti-ageing activities, and so on.

Fast analysis of derivatives of polycyclic aromatic hydrocarbons in soil by ultra-high performance supercritical fluid chromatography after supercritical fluid extraction enrichment

An efficient and environment-friendly method for simultaneous determination of 13 typical derivatives of polycyclic aromatic hydrocarbon(PAH)in petroleum-polluted soil with nitro-,oxy-and alkylfunctional group was developed using supercritical fluid extraction(SFE)followed by ultra-high performance supercritical fluid chromatography(UHPSFC).Parameters of UHPSFC,including type of stationary phase and mobile phase modifiers,gradient elution process,backpressure,column temperature,and the flow rate of mobile phase,were systematically optimized,achieving a fast separation within4.2 min.Limits of detection(LOD)were 0.005-0.1μg mL^(-1)or 0.1-2.0 ng g^(-1),respectively,with a good repeatability(RSD<5.0%).Before UHPSFC-PDA analysis,the PAH-derivatives in soil samples were effectively enriched in 15.0 min using SFE with an online carbon nanotubes(CNTs)collection trap.The soil samples were analyzed by the proposed method and the results were verified by GC-MS.Thus,SFE equipped with an online CNTs trap followed by UHPSFC-PDA analysis,which only consumed about2.0 mL organic solvent for a whole run,has been demonstrated to be an efficient way for screening and quantitative analysis of trace-level PAH-derivatives in soil samples.

Determination of polycyclic aromatic hydrocarbons with supercritical fluid extraction and chromatography（SFE／SFC）

Ｄｅｔｅｒｍｉｎａｔｉｏｎｏｆｐｏｌｙｃｙｃｌｉｃａｒｏｍａｔｉｃｈｙｄｒｏｃａｒｂｏｎｓｗｉｔｈｓｕｐｅｒｃｒｉｔｉｃａｌｆｌｕｉｄｅｘｔｒａｃｔｉｏｎａｎｄｃｈｒｏｍａｔｏｇｒａｐｈｙ（ＳＦＥ／ＳＦＣ）ＹａｏＷｅｉｘｉ（ＲｅｓｅａｒｃｈＣｅｎｔｅ...

Comparison of volatile and semivolatile compounds from commercial cigarette by supercritical fluid extraction and simultaneous distillation extraction

Supercritical carbon dioxide fluid extraction (SFE) was studied as a rapid method for extraction of volatile and semivolatile compounds of Chinese commercial cigarettes. The method was compared with simultaneous distillation and extraction (SDE). Temperature and pressure for the SFE were optimized. The extracts obtained by the two methods showed different characters in composition and represented differently the flavor characteristics of tobacco; compared to SDE, SFE can extract compounds within a shorter time and avoid the thermal degradation and solvent contamination of samples. The extracts by the two extraction methods are complementary for investigating the flavor characteristic of tobacco products.

A comparative study of conventional and supercritical fluid extraction methods for the recovery of secondary metabolites from Syzygium campanulatum Korth

Syzygium campanulatum Korth is a plant, which is a rich source of secondary metabolites （especially flavanones, chalcone, and triterpenoids）. In our present study, three conventional solvent extraction （CSE） techniques and supercritical fluid extraction （SFE） techniques were performed to achieve a maximum recovery of two flavanones, chalcone, and two triterpenoids from S. campanulatum leaves. Furthermore, a Box-Behnken design was constructed for the SFE technique using pressure, temperature, and particle size as independent variables, and yields of crude extract, individual and total secondary metabolites as the dependent variables. In the CSE procedure, twenty extracts were produced using ten different solvents and three techniques （maceration, soxhletion, and reflux）. An enriched extract of five secondary metabolites was collected using n-hexane：methanol （1：1） soxhletion. Using food-grade ethanol as a modifier, the SFE methods produced a higher recovery （25.5%-84.9%） of selected secondary metabo- lites as compared to the CSE techniques （0.92%-66.00%）.

Supercritical fluid extraction and gas chromatography analysis of arsenic species from solid matrices

A method in combination with derivatization-supercritical fluid extraction（SFE） and gas chromatography（GC） for the speciation and quantitative determination of dimethylarsinate（DMA）, monomethylarsonate（MMA） and inorganic arsenic in solid matrices was investigated. Thioglycolic acid methyl ester（TGM） and thioglycolic acid ethyl ester（TGE） were evaluated as derivatization reagents. The effects of pressure, temperature, flow rate of supercritical CO_2, extraction time, modifier and microemulsion on the efficiency of extraction were systematically investigated. The procedure was applied to the analysis of real soil and sediment samples. Results showed that TGE was more effective for arsenic speciation as a derivatization reagent. Modifying supercritical CO_2 with methanol can greatly improve the extraction efficiency. Further, the addition of microemulsion containing surfactant Triton X-100 can further enhance recoveries of arsenic species. The optimum extraction conditions were 100 ℃, 30 MPa, 10 min static and 25 min dynamic extraction with 5%（v/v） methanol, and surfactant modified supercritical CO_2. Detection limits in solid matrices were 0.15, 0.3 and 1.2 mg/kg for DMA, MMA and inorganic arsenic,respectively. The method was validated by the recovery data. The resulting method was fast, easy to perform and selective in the extraction and detection of various arsenic species in solid matrices.

Advent of clean and green technology for preparation of low-cholesterol dairy cream powder:supercritical fluid extraction process

Objectives:Due to health issues related to cholesterol and the emphasis on manufacture of low cholesterol food products,the research was undertaken for the extraction of cholesterol from cream powder using supercritical fluid extraction(SCFE)process.Materials and Methods:Face centered composite design(FCCD)was used to design the experiments with three independent variables viz.,extraction temperature(40˚C-75˚C),extraction pressure(100-250 bar)and dynamic time(2.5-3.5 h)taking two responses(cholesterol and fat content).The standardized flow rate and static time were 5 L/min(expanded CO_(2) gas)and 30 min,respectively.Response surface methodology was used for optimizing the process variables.Results:It was found that higher operating pressure,low extraction temperature and moderate amount of dynamic time facilitated the removal of cholesterol.The optimized process conditions of 75˚C,204 bar and 3.5 h dynamic time yielded 39%reduction in cholesterol content and 10.6%reduction in total fat content of the cream powder.Conclusions:Thus,a low cholesterol cream powder was developed with health benefits for people suffering from cardiovascular diseases.

Optimization of Supercritical Fluid Extraction and Rapid Resolution LC-MS/ESI Identification of Chromones from Saposhnikoviae Radix through Orthogonal Array Design

Objective To establish a rapid and effective supercritical fluid extraction（SFE） and rapid resolution liquid chromatography method coupled with diode-array detector（RRLC-DAD） to quantify the chromones in a species. Methods The effects of four parameters including ethanol concentration（50%-90%）, pressure（25-45 MPa）, temperature（40-60 ℃）, and time（30-90 min） on the chromones yields, namely prim-O-glucosylcimifugin, cimifugin, 5-O-methylvisammioside, and sec-O-glucosylhamaudol, were investigated using SFE system with orthogonal array design（OAD）. Furthermore, the extracts were analyzed using rapid resolution liquid chromatography coupled with diode-array detector（RRLC-DAD） system to confirm the results. Results Under the optimized conditions, i.e., 35 MPa of pressure, 60 ℃ of temperature, 70% ethanol, and 60 min of time, the yields of prim-O-glucosylcimifugin, cimifugin, 5-O-methylvisammioside, sec-O-glucosylhamaudol, and total chromones were 3.514, 0.132, 6.242, 0.342, and 10.231 mg/g, respectively. In comparison with ultrasonic assisted extraction（UAE）, SFE was able to yield a 20.7% increase in the total chromones from Saposhnikoviae Radix. Conclusion SFE is an alternative and promising method to extract chromones from this species, and the established RRLC-DAD method could serve as a rapid and effective method for the identification of chromones from Saposhnikoviae Radix.

Hydrodynamics and Mass Transfer Performance in Supercritical Fluid Extraction Columns

New models for describing hydrodynamics and mass transfer performance in supercritical fluid extraction columns were proposed. Those models were proved by experimental data, which were obtained in supercritical fluid extraction packed column, spray column and sieve tray column respectively. The inner diameter of those columns areФ25 mm. These experimental systems include supercritical carbon diox-ide-isopropanol-water and supercritical carbon dioxide-ethanol-water, in which supercritical carbon dioxide was dispersed phase, and another was continuous phase. The extraction processes were operated with continuous countercurrent flow. The predicted values are agreed well with experimental data.

Study on a New Method of Extraction of Metal Ions from SolidMatrices by Supercritical Fluid

8-Hydroxyquinoline, methanol and Triton-100 were first used together in the extraction of metal ions by supercritical CO2. In the new system, the effects of pressure, temperature and the volume of CO2 on the efficiency of supercritical fluid extraction (SFE) were systematically investigated. The recovery under the optimum condition was only 11.38%, but if suitable concentration of methanol (v/v=5%) was added to the supercritical CO2, the recovery was increased significantly (83.60%, RSD=4.37%, n=5). In order to further enhance the recovery Triton X-100 was added to the samples, and the results were satisfactory (96.62%, RSD=2.85%, n=5).

Production of De-asphalted Oil and Fine Asphalt Particles by Supercritical Extraction

A continuous three-stage supercritical fluid extraction (SFE) process with a capacity of 1.0kg.h^-1 was setup to extract petroleum residue by pentane to obtain more oil for further upgrading. A discharging system integrated to the bottom of the extractor was used to recover solvent as gas while asphalt was obtained as fine particles. The influence of operating conditions on the yield and quality of extracts, i.e., deasphalted oil (DAO) and resin, was studied in the range of temperature 150-220℃, pressure of 4.0-6.0 MPa and the mass ratio of solvent to oil feed (S/O) 2.5-5.0. The particle size distribution, apparent forms and the packing density, which vary with operating pressure, were measured. The particle structures were observed by SEM as well. With the modification to conventional processes, furnace can be eliminated for solvent recovery from asphalt phase, so as to reduce energy consumption.

Effect of Three Extraction Methods on the Volatile Component of Illicium verum Hook.f.Analyzed by GC-MS

The physical properties and chemical components of three oil samples extracted from Illicium verum Hook. f. by steam distillation （SD）, solvent extraction （SE） and supercritical fluid extraction （SFE） were compared with one another and analyzed by Gas Chromatography-Mass Spectrometry （GC-MS）. The quality parameters of star anise essential oil from SFE were close to that of those came from SD and SE. Although the extraction yield of star anise by SFE （9.2 %） was close to the value from SE （9.3%）, it was yet higher than that came from SD （8.2%）. For sensory evaluation, however, three oils were significantly different. The odor and taste of the products from SFE and SE were generally more natural and vivid than that came from distilled oil. The volatile compound revealed that significant differences of the composition existed in the distilled oil and the oleoresins prepared by SFE and SE.

Extraction of cellulose with subcritical and Supercritical ethanol

Cotton cellulose was extracted with ethanol in sub-and supercritical states dynamically. The degree of conversion was 95.4% and the extract yield was 55.2% when cotton cellulose was non-isothermally extracted with ethanol from 20°C to 400°C. From an engineering standpoint, in the temperature range from 200°C to 320°C, the rate of extract formation could adequately be described by a second-order reaction kinetics equation with the activation energy of 105.3 kJ/mol and the pre-exponential factor of 3.53×107 s?1. With the non-isothermal experimental technique, it was possible to determine the kinetic parameters; conversion degree and extract yield by one experiment.

A Comparative Study on Hemp(Cannabis sativa)Essential Oil Extraction Using Traditional and Advanced Techniques

A comparative study of Cannabis sativa(Hemp)essential constituents obtained by using Supercritical Fluid Extraction(SCFE),Steam Distillation(SD)and Hydrodistillation(HD)is presented here.The optimized extraction temperatures were 130,110and 50℃for hydrodistillation,steam distillation and supercritical fluid extraction respectively.The essential oil of C.sativa was analyzed by using Gas chromatography mass spectrometry(GC-MS).A total of 33,30and 31components have been identified in HD,SD and SCFE respectively.Yield of essential oil using SCFE(0.039%)was more than HD(0.025%)and SD(0.035%)extraction respectively.The main component of sesquiterpenes obtained by hydrodistillation at 130℃with their percentages included caryophyllene(40.58%),trans-α-bergamotene(5.41%),humulene(10.97%),cis-β-farnesene(8.53%)and monoterpenes includedα-pinene(2.13%),d-limonene(6.46%),p-cymol(0.65%)and cineole(2.58%)respectively.The main component of sesquiterpenes obtained by SD steam distillation at110℃including caryophyllene(38.60%)trans-α-bergamotene(4.22%),humulene(10.26%),cis-β-farnesene(6.67%)and monoterpenes includedα-pinene(3.21%),d-limonene(7.07%),p-cymol(2.59%)and cineole(3.88%)whereas the more percentages of major components were obtained by SCFE at 50℃included caryophyllene(44.31%),trans-α-bergamotene(6.79%),humulene(11.97%)cis-β-farnesene(9.71%)and monoterpenes includedα-pinene(0.45%),d-limonene(2.13%)p-cymol(0.19%)and cineole(1.38%)respectively.We found yield/efficiency,chemical composition,quality of the essential oils by supercritical fluid extraction superior in terms of modern,green,saving energy and a rapid approach as compared to traditional techniques.

Comparative study on yields and quality parameters of argan oils extracted by conventional and green extraction techniques

Argan oil is most frequently sold as pure oil,which can be directly applied topically due to its cosmetological proprieties or ingested in order to provide several health benefits.It's also commonly mixed into a number of cosmetic products like shampoos,soaps and conditioners.In this study we aimed to improve the argan oil extraction yield and quality parameters by comparing the effects of different extraction technologies.Argan kernel oils were extracted using four methods:mechanical cold press,Soxhlet extraction with n-hexane,supercritical fluid extraction(SFE),and enzyme assisted extraction with three different enzyme solutions cellulase(cellulast),pectinase(Pectinex)and a mixture of carbohydrase enzymes(Viscozyme®).The quality parameters was evaluated by determining the acid,peroxide and iodine values aswell as the extinction coefficients K_(232) and K_(270) as measures of conjugated dienes and trienes,respectively.The results showed that the highest yield(66.37%±3.3%)was obtained by enzyme assisted extraction using the carbohydrases enzymes mixture(Viscozyme®),followed by Soxhlet extraction(59.5%±3.1%)and pectinase extraction(52.03%±3.55%).All argan oils samples obtained by the different methods showed a good oxidation stability,with acid,peroxide and iodine values lower than 0.8 mg/g,15 meq/kg and 110 g/100 g according to the official argan oil norm,respectively.The results of argan oils quality parameters demonstrated that the enzyme extracted argan oils showed low oxidation,with the following quality parameters:acid values(0.4-0.6 mg/g),iodine values(95-100 g/100 g),dienes(K_(232)<2),trienes(K_(270)<0.35),and peroxide values(<1.5 meq/kg).The results proved that the enzyme assisted extraction method can be applied to improve the argan oil yield without affecting the oil quality.The enzyme extraction method may be a great alternative to solvent and cold press extractions for this eco-friendly processing approach.