期刊文献+
共找到10篇文章
< 1 >
每页显示 20 50 100
Dynamic Buckling of Elasto-Plastic Cylindrical Shells Under Axial Fluid-Solid Impact Load 被引量:9
1
作者 Gu Wangming and Chen Tieyun" Postdoctor, Department of Naval Architechture and Ocean Engineering, Shanghai Jiaotong University,Shanghai 200030 Professor, Department of Naval Architechture and Ocean Engineering, Shanghai Jiaotong University, Shanghai 200030 《China Ocean Engineering》 SCIE EI 1994年第3期237-250,共14页
The dynamic buckling of elasto-plastic cylindrical shells under axial fluid-solid impact is investigated theoretically. A simplified liquid- gas- structure model is given to approximately imitate the problem. The basi... The dynamic buckling of elasto-plastic cylindrical shells under axial fluid-solid impact is investigated theoretically. A simplified liquid- gas- structure model is given to approximately imitate the problem. The basic equation of the structure is derived from a minimum principle in dynamics of elasto-plastic continua at finite deformation, and the flow theory of plasticity is employed. The liquid is incompressible and the gas is compressed adiabatically. A number of numerical results are presented and the characteristics of the buckling behavior under fluid-solid impact are illustrated. 展开更多
关键词 fluid-solid impact cylindrical shell dynamic buckling elasto-plastic buckling
下载PDF
Numerical Analysis of Hydrodynamic Pressure Induced by Fluid-Solid Impact 被引量:2
2
作者 黄玉盈 邹时智 +1 位作者 钱勤 李其申 《China Ocean Engineering》 SCIE EI 2000年第1期1-13,共13页
As a further development of the authors' work (Huang and Qian, 1993), in this paper a new numerical method based on the time domain boundary element technique is proposed for solving fluid-solid coupling problems,... As a further development of the authors' work (Huang and Qian, 1993), in this paper a new numerical method based on the time domain boundary element technique is proposed for solving fluid-solid coupling problems, in which a rigid body impacts normally on the calm surface of a half-space fluid. A fundamental solution to the half-space potential flow problem is first derived with the method of images. Then, an equivalent boundary integral equation in the Laplace transform domain is established by means of Green's second identity. Through the inverse Laplace transform and discretization in both time and boundary of the fluid region, the numerical calculation for the problem under consideration has been carried out. Several examples demonstrate that the present method is more efficient than existing ones, from which it is also seen that the shape of the impacting body has a considerable effect on the total impact force. 展开更多
关键词 fluid-solid impact boundary element method hydrodynamic pressure potential flow numerical analysis
下载PDF
DYNAMIC BUCKLING OF STIFFENED PLATES UNDER FLUID-SOLID IMPACT LOAD
3
作者 张涛 刘土光 +1 位作者 熊有伦 张维衡 《Applied Mathematics and Mechanics(English Edition)》 SCIE EI 2004年第7期827-835,共9页
A simple solution of the dynamic buckling of stiffened plates under fluid-solid impact loading is presented.Based on large deflection theory,a discretely stiffened plate model has been used.The tangential stresses of ... A simple solution of the dynamic buckling of stiffened plates under fluid-solid impact loading is presented.Based on large deflection theory,a discretely stiffened plate model has been used.The tangential stresses of stiffeners and in-plane displacement are neglected.Applying the (Hamilton's) principle,the motion equations of stiffened plates are obtained.The deflection of the plate is taken as Fourier series,and using Galerkin method,the discrete equations can be deduced,which can be solved easily by Runge-Kutta method.The dynamic buckling loads of the stiffened plates are obtained from Budiansky-Roth(B-R) curves. 展开更多
关键词 stiffened plate NONLINEARITY dynamic buckling fluid-solid impact
下载PDF
冲击载荷下的齿轮动应力变化规律数值分析 被引量:14
4
作者 唐进元 彭方进 黄云飞 《振动与冲击》 EI CSCD 北大核心 2009年第8期138-143,共6页
基于虚拟制造方法建立了滚剃工艺的精确圆柱直齿轮三维几何模型,并进行线外啮合冲击动态仿真分析,得到了可靠的齿轮动应力变化规律。仿真结果表明:冲击加载时,不同工况下齿根两侧最大动应力的出现位置呈对称分布;冲击载荷下,齿根最大应... 基于虚拟制造方法建立了滚剃工艺的精确圆柱直齿轮三维几何模型,并进行线外啮合冲击动态仿真分析,得到了可靠的齿轮动应力变化规律。仿真结果表明:冲击加载时,不同工况下齿根两侧最大动应力的出现位置呈对称分布;冲击载荷下,齿根最大应力大于ISO标准静强度理论值,最大应力位置比ISO标准确定的最危险截面位置偏高;冲击载荷峰值相同时,冲击时间越短,产生的动应力越大。 展开更多
关键词 冲击载荷 有限元分析 动应力 齿轮
下载PDF
落锤冲击加载下炸药基体内不同粒度AP颗粒破碎特征 被引量:7
5
作者 孙培培 王晓峰 +1 位作者 南海 郭昕 《含能材料》 EI CAS CSCD 北大核心 2015年第1期53-56,共4页
为研究炸药基体内不同粒度高氯酸铵(AP)颗粒在落锤冲击加载下的破碎特征,用中粒径为6--8,130,300μm的AP制备了三种AP/HTPB样品,用落锤冲击加载损毁样品。回收冲击试验后样品,用扫描电镜(SEM)研究AP颗粒的破碎特征。分析炸药基体内... 为研究炸药基体内不同粒度高氯酸铵(AP)颗粒在落锤冲击加载下的破碎特征,用中粒径为6--8,130,300μm的AP制备了三种AP/HTPB样品,用落锤冲击加载损毁样品。回收冲击试验后样品,用扫描电镜(SEM)研究AP颗粒的破碎特征。分析炸药基体内不同粒度AP颗粒在落锤冲击加载下的破碎特征。结果表明,冲击加载后,三种样品内的AP颗粒均发生脆性破裂,部分晶体上清晰可见剪切带现象,且粒度越大颗粒破碎越严重。破碎后AP颗粒尺寸均在10--100μm,最小颗粒小于10μm。结合材料剪切理论、AP颗粒破碎特征和破碎尺度,可推断:在落锤冲击下AP颗粒由于样品内部的剪切作用发生脆性断裂,且AP颗粒破碎尺度特征与材料剪切现象中的剪切带尺寸特征相类似。 展开更多
关键词 含能材料损伤学 高氯酸铵(AP) 落锤撞击加载 破碎特征 绝热剪切
下载PDF
73.0mm EU J55油管短节断裂原因分析 被引量:9
6
作者 吕拴录 袁鹏斌 +3 位作者 魏茂质 宋顺平 唐飞 吴天灵 《理化检验(物理分册)》 CAS 2008年第12期715-718,共4页
对断裂油管短节和新油管短节材质进行了对比试验,并对所用吊卡和油管接箍主要配合尺寸进行了测量和分析,发现吊卡磨损之后承载面孔径变大,油管接箍承载面本身偏小。根据尺寸测量结果,推断出了油管断裂时与吊卡的非正常配合状态。对油管... 对断裂油管短节和新油管短节材质进行了对比试验,并对所用吊卡和油管接箍主要配合尺寸进行了测量和分析,发现吊卡磨损之后承载面孔径变大,油管接箍承载面本身偏小。根据尺寸测量结果,推断出了油管断裂时与吊卡的非正常配合状态。对油管断裂时的受力状态分析结果认为油管短节失效过程为:接箍一侧承载面滑入磨损的吊卡承载面内孔里边,管体倾斜与吊卡上活门体下端面内圆弧棱相撞产生裂纹和变形,最后在偏斜拉伸和冲击载荷共同作用下断裂。 展开更多
关键词 油管短节 接箍 吊卡 偏斜拉伸 冲击载荷
下载PDF
流-固冲击载荷作用下圆柱薄壳的动力屈曲研究 被引量:3
7
作者 龚良贵 李情 《南昌大学学报(工科版)》 CAS 2010年第2期158-162,共5页
研究流-固冲击载荷作用下的圆柱薄壳动力屈曲问题。运动方程采用Karman-Donnell运动方程,本构关系采用增量理论,借助增量数值计算方法对Karman-Donnell运动方程进行求解。结果表明:均匀径向外压对圆柱壳的轴向冲击过程和冲击性态有较大... 研究流-固冲击载荷作用下的圆柱薄壳动力屈曲问题。运动方程采用Karman-Donnell运动方程,本构关系采用增量理论,借助增量数值计算方法对Karman-Donnell运动方程进行求解。结果表明:均匀径向外压对圆柱壳的轴向冲击过程和冲击性态有较大的影响。讨论了径向压力与轴向冲击载荷的幅值对结构临界动力屈曲载荷和临界动力失效载荷的影响。 展开更多
关键词 圆柱薄壳 流-固冲击载荷 动力屈曲 本构关系 临界载荷
下载PDF
冲击荷载作用下圆环的动态响应 被引量:2
8
作者 王祥林 王立平 王强 《岩土工程学报》 EI CAS CSCD 北大核心 1995年第2期60-67,共8页
本文用动光弹性方法研究冲击载荷下不同支承条件的圆环的动态响应;开口圆环模型内部应力波的传播、动应力分布;在圆环开口处镶嵌不同材料介质后,动应力分布状况的变化。文中还对内边界受冲击力作用的镶嵌圆环进行了实验研究。
关键词 动态响应 冲击荷载 应力波 岩体 建筑物
下载PDF
弹丸正撞击Whipple防护结构后墙的撞击载荷分析 被引量:3
9
作者 张永 李明 韩增尧 《航天器工程》 2008年第6期79-83,共5页
文章为了分析超高速弹丸对Whipple防护结构后墙的撞击损伤,利用质量守恒、动量守恒及能量守恒等分析了碎片云运动特性,在此基础上构造了碎片云对Whipple防护结构后墙的法向撞击载荷函数,为进一步分析弹丸超高速正撞击Whipple防护结构后... 文章为了分析超高速弹丸对Whipple防护结构后墙的撞击损伤,利用质量守恒、动量守恒及能量守恒等分析了碎片云运动特性,在此基础上构造了碎片云对Whipple防护结构后墙的法向撞击载荷函数,为进一步分析弹丸超高速正撞击Whipple防护结构后其后墙的裂纹长度提供了有效的分析工具。 展开更多
关键词 WHIPPLE防护结构 后墙 撞击载荷 超高速撞击
下载PDF
气动升力对水陆两栖飞机着水载荷的影响研究 被引量:3
10
作者 胡奇 王明振 +2 位作者 张家旭 吴彬 蒋荣 《航空计算技术》 2018年第6期36-39,共4页
气动升力对水陆两栖飞机着水载荷会产生较大的影响,采用理论分析研究不同气动升力对着水载荷的影响,确定了载荷增量、加速度增量与气动升力减小量之间的关系。利用典型水陆两栖飞机剖面模型,运用耦合欧拉-拉格朗日方法对水陆两栖飞机着... 气动升力对水陆两栖飞机着水载荷会产生较大的影响,采用理论分析研究不同气动升力对着水载荷的影响,确定了载荷增量、加速度增量与气动升力减小量之间的关系。利用典型水陆两栖飞机剖面模型,运用耦合欧拉-拉格朗日方法对水陆两栖飞机着水进行仿真计算,得到气动升力变化量与载荷变化量之间的关系,表明了水陆两栖飞机着水加速度增量大约是气动力减小量的0.33倍。 展开更多
关键词 水陆两栖飞机 气动升力 着水载荷 理论分析 仿真计算
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部