To study the influence of back feeding particles on gas-solid flow in the riser, this paper investigated the flow asymmetry in the solid entrance region of a fluidized bed by particle concentration/velocity measuremen...To study the influence of back feeding particles on gas-solid flow in the riser, this paper investigated the flow asymmetry in the solid entrance region of a fluidized bed by particle concentration/velocity measurements in a cold square circulating fluidized beds （CFB）. The pressure drop distribution along the riser and the saturation carrying capacity of gas for Geldart-B type particles were first analyzed. Under the condition of u0 = 4 m/s and Gs = 21 kg/（m^2 s）, the back feeding particles were found to penetrate the lean gas-solid flow near the entrance （rear） wall before reaching the opposite （front） wall, thus leading to a relatively denser region near the front wall in the bottom bed. Higher solid circulation rate （u0 =4 m/s, Gs = 33 kg/（m^2 s）） resulted in a higher particle concentration in the riser. However the back feeding particles with higher momentum increased the asymmetry of the particle concentration/velocity profile in the solid entrance region. Lower air velocity （u0 =3.2 m/s） and Gs =21 kg/（m2 s）, beyond the saturation carrying capacity of gas, induced an S-shaped axial solid distribution with a denser bottom zone. This limited the penetration of the back feeding particles and forced the flnidizing air to flow in the central region, thus leading to a higher solid holdup near the rear wall. Under the conditions of uo = 4 m/s and Gs = 21 kg/（m^2 s）, addition of coarse particles （dp= 1145 μm） into the bed made the radial distribution of solids more symmetrical.展开更多
基金supported financially by the Ministry of Science of China under the National Key Technology R&D Program of China (Contract No.:2006BAA03B01-07)
文摘To study the influence of back feeding particles on gas-solid flow in the riser, this paper investigated the flow asymmetry in the solid entrance region of a fluidized bed by particle concentration/velocity measurements in a cold square circulating fluidized beds （CFB）. The pressure drop distribution along the riser and the saturation carrying capacity of gas for Geldart-B type particles were first analyzed. Under the condition of u0 = 4 m/s and Gs = 21 kg/（m^2 s）, the back feeding particles were found to penetrate the lean gas-solid flow near the entrance （rear） wall before reaching the opposite （front） wall, thus leading to a relatively denser region near the front wall in the bottom bed. Higher solid circulation rate （u0 =4 m/s, Gs = 33 kg/（m^2 s）） resulted in a higher particle concentration in the riser. However the back feeding particles with higher momentum increased the asymmetry of the particle concentration/velocity profile in the solid entrance region. Lower air velocity （u0 =3.2 m/s） and Gs =21 kg/（m2 s）, beyond the saturation carrying capacity of gas, induced an S-shaped axial solid distribution with a denser bottom zone. This limited the penetration of the back feeding particles and forced the flnidizing air to flow in the central region, thus leading to a higher solid holdup near the rear wall. Under the conditions of uo = 4 m/s and Gs = 21 kg/（m^2 s）, addition of coarse particles （dp= 1145 μm） into the bed made the radial distribution of solids more symmetrical.
