Fluorinated carbons CF_xhold the highest theoretical energy density(e.g.,2180 W h kg^(-1)when x=1)among all cathode materials of lithium primary batteries.However,the low conductivity and severe polarization limit it ...Fluorinated carbons CF_xhold the highest theoretical energy density(e.g.,2180 W h kg^(-1)when x=1)among all cathode materials of lithium primary batteries.However,the low conductivity and severe polarization limit it to achieve its theory.In this study,we design a new electrolyte,namely 1 M LiBF_(4)DMSO:DOL(1:9 vol.),achieving a high energy density in Li/CF_xprimary cells.The DMSO with a small molecular size and high donor number successfully solvates Li^(+)into a defined Li^(+)-solvation structure.Such solvated Li^(+)can intercalate into the large-spacing carbon layers and achieve an improved capacity.Consequently,when discharged to 1.0 V,the CF_(1.12)cathode demonstrates a specific capacity of 1944 m A h g^(-1)with a specific energy density of 3793 W h kg^(-1).This strategy demonstrates that designing the electrolyte is powerful in improving the electrochemical performance of CF_(x) cathode.展开更多
Li metal batteries using high-voltage layered oxides cathodes are of particular interest due to their high energy density.However,they suffer from short lifespan and extreme safety concerns,which are attributed to the...Li metal batteries using high-voltage layered oxides cathodes are of particular interest due to their high energy density.However,they suffer from short lifespan and extreme safety concerns,which are attributed to the degradation of layered oxides and the decomposition of electrolyte at high voltage,as well as the high reactivity of metallic Li.The key is the development of stable electrolytes against both highvoltage cathodes and Li with the formation of robust interphase films on the surfaces.Herein,we report a highly fluorinated ether,1,1,1-trifluoro-2-[(2,2,2-trifluoroethoxy)methoxy]ethane(TTME),as a cosolvent,which not only functions as a diluent forming a localized high concentration electrolyte(LHCE),but also participates in the construction of the inner solvation structure.The TTME-based electrolyte is stable itself at high voltage and induces the formation of a unique double-layer solid electrolyte interphase(SEI)film,which is embodied as one layer rich in crystalline structural components for enhanced mechanical strength and another amorphous layer with a higher concentration of organic components for enhanced flexibility.The Li||Cu cells display a noticeably high Coulombic efficiency of 99.28%after 300 cycles and Li symmetric cells maintain stable cycling more than 3200 h at 0.5 mA/cm^(2) and 1.0m Ah/cm^(2).In addition,lithium metal cells using LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) and Li CoO_(2) cathodes(both loadings~3.0 m Ah/cm^(2))realize capacity retentions of>85%over 240 cycles with a charge cut-off voltage of 4.4 V and 90%for 170 cycles with a charge cut-off voltage of 4.5 V,respectively.This study offers a bifunctional ether-based electrolyte solvent beneficial for high-voltage Li metal batteries.展开更多
Fluorinated electrolytes possess good antioxidant capacity that provides high compatibility to high-voltage cathode and flame retardance;thus,they are considered as a promising solution for advanced lithium-ion batter...Fluorinated electrolytes possess good antioxidant capacity that provides high compatibility to high-voltage cathode and flame retardance;thus,they are considered as a promising solution for advanced lithium-ion batteries carrying both high-energy density and high safety.Moreover,the fluorinated electrolytes are widely used to form stable electrolyte interphase,due to their chemical reactivity with lithiated graphite or lithium.However,the influence of this reactivity on the thermal safety of batteries is seldom discussed.Herein,we demonstrate that the flame-retardant fluorinated electrolytes help to reduce the flammability,while the lithium-ion batteries with flame-retardant fluorinated electrolytes still undergo thermal runaway and disclose their different thermal runaway pathway from that of battery with conventional electrolyte.The reduction in fluorinated components(e.g.,LiPF 6 and fluoroethylene carbonate(FEC))by fully lithiated graphite accounts for a significant heat release during battery thermal runaway.The 13%of total heat is sufficient to trigger the chain reactions during battery thermal runaway.This study deepens the understanding of the thermal runaway mechanism of lithium-ion batteries employing flame-retardant fluorinated electrolytes,providing guidance on the concept of electrolyte design for safer lithium-ion batteries.展开更多
Fluorinated carbons(CFx)have been widely applied as lithium primary batteries due to their ultra-high energy density.It will be a great promise if CFx can be rechargeable.In this study,we rationally tune the C-F bond ...Fluorinated carbons(CFx)have been widely applied as lithium primary batteries due to their ultra-high energy density.It will be a great promise if CFx can be rechargeable.In this study,we rationally tune the C-F bond strength for the alkaline intercalated CFx via importing an electronegative weaker element K instead of Li.It forms a ternary phase K_(x)FC instead of two phases(LiF+C)in lithium-ion batteries.Meanwhile,we choose a large layer distance and more defects CFx,namely fluorinated soft carbon,to accommodate K.Thus,we enable CFx rechargeable as a potassium-ion battery cathode.In detail fluorinated soft carbon CF_(1.01) presents a reversible specific capacity of 339 mA h g^(-1)(797 Wh kg^(-1))in the 2nd cycle and maintains 330 mA h g^(-1)(726 Wh kg^(-1))in the 15th cycle.This study reveals the importance of tuning chemical bond stability using different alkaline ions to endow batteries with rechargeability.This work provides good references for focusing on developing reversible electrode materials from popular primary cell configurations.展开更多
With the popularity and widespread applications of electronics,higher demands are being placed on the performance of battery materials.Due to the large difference in electronegativity between fluorine and carbon atoms...With the popularity and widespread applications of electronics,higher demands are being placed on the performance of battery materials.Due to the large difference in electronegativity between fluorine and carbon atoms,doping fluorine atoms in nanocarbon-based materials is considered an effective way to improve the performance of used battery.However,there is still a blank in the systematic review of the mechanism and research progress of fluorine-doped nanostructured carbon materials in various batteries.In this review,the synthetic routes of fluorinated/fluorine-doped nanocarbon-based(CF_x)materials under different fluorine sources and the function mechanism of CF_x in various batteries are reviewed in detail.Subsequently,judging from the dependence between the structure and electrochemical performance of nanocarbon sources,the progress of CF_x based on different dimensions(0D–3D)for primary battery applications is reviewed and the balance between energy density and power density is critically discussed.In addition,the roles of CF_x materials in secondary batteries and their current applications in recent years are summarized in detail to illustrate the effect of introducing F atoms.Finally,we envisage the prospect of CF_x materials and offer some insights and recommendations to facilitate the further exploration of CF_x materials for various high-performance battery applications.展开更多
The surface flashover of epoxy resin(EP) composites is a pivotal problem in the field of highvoltage insulation.The regulation of the interface between the filler and matrix is an effective means to suppress flashover...The surface flashover of epoxy resin(EP) composites is a pivotal problem in the field of highvoltage insulation.The regulation of the interface between the filler and matrix is an effective means to suppress flashover.In this work,nano ZnO was fluorinated and grafted using lowtemperature plasma technology,and the fluorinated filler was doped into EP to study the DC surface flashover performance of the composite.The results show that plasma fluorination can effectively inhibit the agglomeration by grafting –CFxgroups onto the surface of nano-ZnO particles.The fluorine-containing groups at the interface provide higher charge binding traps and enhance the insulation strength at the interface.At the same time,the interface bond cooperation caused by plasma treatment also promoted the accelerating effect of nano ZnO on charge dissipation.The two effects synergistically improve the surface flashover performance of epoxy composites.When the concentration of fluorinated ZnO filler is 20%,the flashover voltage has the highest increase,which is 31.52% higher than that of pure EP.In addition,fluorinated ZnO can effectively reduce the dielectric constant and dielectric loss of epoxy composites.The interface interaction mechanism was further analyzed using molecular dynamics simulation and density functional theory simulation.展开更多
A novel fluorinated polyurethane (FPU) with fluorine-containing pendent groups was prepared by using fluorinated polyether glycol (PTMG-g-HFP) as a soft segment, 1,6-hexamethylene diisocyanate (HDI) or toluene d...A novel fluorinated polyurethane (FPU) with fluorine-containing pendent groups was prepared by using fluorinated polyether glycol (PTMG-g-HFP) as a soft segment, 1,6-hexamethylene diisocyanate (HDI) or toluene diisocyanate (TD1) as a hard segment and 1,4-butanodiol (BDO) as a chain extender. FTIR, ^1H NMR, ^13C NMR and GPC were used to characterize the structure of the fluorinated polyurethane. Thermal stabilities of the fluorinated polyurethane and the corresponding hydrogenated polyurethane were studied by TGA. XPS analysis at two different sampling depths for the fluorinated polyurethane was used to investigate the surface compositions of FPU. The results showed the fluorine enrichment on the surface of FPU.展开更多
Ethyl-(2,2,2-trifluoroethyl)carbonate(ETFEC)is investigated as a solvent component in high-voltage electrolytes for LiNi0.5Mn1.5O4(LNMO).Our results show that the self-discharge behavior and the high temperature cycle...Ethyl-(2,2,2-trifluoroethyl)carbonate(ETFEC)is investigated as a solvent component in high-voltage electrolytes for LiNi0.5Mn1.5O4(LNMO).Our results show that the self-discharge behavior and the high temperature cycle performance can be significantly improved by the addition of 10%ETFEC into the normal carbonate electrolytes,e.g.,the capacity retention improved from 65.3%to 77.1%after 200 cycles at 60℃.The main reason can be ascribed to the high stability of ETFEC which prevents large oxidation of the electrolyte on the cathode surface.In addition,we also explore the feasibility of electrolytes using single fluoriated-solvents with and without additives.Our results show that the cycle performance of LNMO material can be greatly improved in 1 MLiPF6+pure ETFEC-solvent system with 2 wt%ethylene carbonate(EC)or ethylene sulfate(DTD).The capacity retention of the LNMO materials is 93%after 300 cycles,even better than that of carbonate-based electrolytes.It is shown that the additives are oxidized on the surface of LNMO particles and contribute to the formation of cathode/electrolyte interphase(CEI)films.This composite CEI film plays a crucial role in suppressing the serious decomposition of the electrolyte at high voltage.展开更多
This paper reported the oxidation of ethylbenzene catalyzed by fluorinated metalloporphyrins under mild conditions without any additives. The results showed that the cobalt(II)(5,10,15,20-tetrakis(pentafluorophenyl))p...This paper reported the oxidation of ethylbenzene catalyzed by fluorinated metalloporphyrins under mild conditions without any additives. The results showed that the cobalt(II)(5,10,15,20-tetrakis(pentafluorophenyl))porphyrin was the best catalyst among the fluorinated metalloporphyrins. The conversion of ethylbenzene reached 38.6%, the selectivity to acetophenone reached 94.0%, and the turnover number is 2719 under the optimal conditions.展开更多
Lithium–sulfur(Li–S) batteries represent a "beyond Li-ion" technology with low cost and high theoretical energy density and should fulfill the ever-growing requirements of electric vehicles and stationary ...Lithium–sulfur(Li–S) batteries represent a "beyond Li-ion" technology with low cost and high theoretical energy density and should fulfill the ever-growing requirements of electric vehicles and stationary energy storage systems. However, the sulfur-based conversion reaction in conventional liquid electrolytes results in issues like the so-called shuttle effect of polysulfides and lithium dendrite growth, which deteriorate the electrochemical performance and safety of Li–S batteries. Optimization of conventional organic solvents(including ether and carbonate) by fluorination to form fluorinated electrolytes is a promising strategy for the practical application of Li–S batteries. The fluorinated electrolytes, owing to the high electronegativity of fluorine, possesses attractive physicochemical properties, including low melting point,high flash point, and low solubility of lithium polysulfide, and can form a compact and stable solid electrolyte interphase(SEI) with the lithium metal anode. Herein, we review recent advancements in the development of fluorinated electrolytes for use in Li–S batteries. The effect of solvent molecular structure on the performance of Li–S batteries and the formation mechanism of SEI on the cathode and anode sides are analyzed and discussed in detail. The remaining challenges and future perspectives of fluorinated electrolytes for Li–S batteries are also presented.展开更多
The pressure drop during production in the near-wellbore zone of gas condensate reservoirs causes condensate formation in this area.Condensate blockage in this area causes an additional pressure drop that weakens the ...The pressure drop during production in the near-wellbore zone of gas condensate reservoirs causes condensate formation in this area.Condensate blockage in this area causes an additional pressure drop that weakens the effective parameters of production,such as permeability.Reservoir rock wettability alteration to gas-wet through chemical treatment is one of the solutions to produce these condensates and eliminate condensate blockage in the area.In this study,an anionic fluorinated surfactant was synthesized and used for chemical treatment and carbonate rock wettability alteration.The synthesized surfactant was characterized by Fourier transform infrared spectroscopy and thermogravimetric analysis.Then,using surface tension tests,its critical micelle concentration(CMC)was determined.Contact angle experiments on chemically treated sections with surfactant solutions and spontaneous imbibition were performed to investigate the wettability alteration.Surfactant adsorption on porous media was calculated using flooding.Finally,the surfactant foamability was investigated using a Ross-Miles foam generator.According to the results,the synthesized surfactant has suitable thermal stability for use in gas condensate reservoirs.A CMC of 3500 ppm was obtained for the surfactant based on the surface tension experiments.Contact angle experiments show the ability of the surfactant to chemical treatment and wettability alteration of carbonate rocks to gas-wet so that at the constant concentration of CMC and at 373 K,the contact angles at treatment times of 30,60,120 and 240 min were obtained 87.94°,93.50°,99.79°and 106.03°,respectively.However,this ability varies at different surfactant concentrations and temperatures.The foamability test also shows the suitable stability of the foam generated by the surfactant,and a foam half-life time of 13 min was obtained for the surfactant at CMC.展开更多
While serious stability issues impede the commercialization of perovskite solar cells(PSCs),two-dime nsional(2D)perovskites based on fluorinated bulky cations have emerged as more intrinsically stable materials.Howeve...While serious stability issues impede the commercialization of perovskite solar cells(PSCs),two-dime nsional(2D)perovskites based on fluorinated bulky cations have emerged as more intrinsically stable materials.However,the influence of fluorination degree of the bulky aromatic cation on the per-formance of resulting PSCs has not been scrutinized.Here,2D perovskites(FxPEA)_(2)PbI_(4)(x=1,2,3,5)are grown in situ on the surface of the three-dime nsion al(3D)perovskite and dem on strate effective passivation of the surface defects of 3D perovskite.The power conversion efficiency(PCE)of the optimized devices were boosted from 20.75%for the control device to 21.09%,22.06%,22.74%and 21.86%for 2D/3D devices treated with 4-fluorophenethylamine iodide,3,5-difluorophenylethylamine iodide,2,4,5-trifluoroethylphenylethylamine iodide,and 1,2,3,4,5-pentafluorophenylethylamine iodide,respectively.We firstly reported two unexplored RP-type layered perovskites with F_(2)PEAI and F_(3)PEAI as bulky cations.The combined experimental and theoretical analysis revealed the reasons behind the various morphology,device performances,dynamic behavior,and humidity stability.The best performing F_(5)PEAI-treated device retaining 95.0%of its initial PCE under ambient atmosphere(with RH of 60%±5%)without encapsulation for 300 h storage.This work provides useful guidance for selecting fluorinated bulky cations with different molecular electronic properties,which will play an essential role in further improving the performance/stability of PSCs for the sake of further commercialization.展开更多
The improvement of biocompatibility of polyurethanes was investigated.The results demonstrate that the blood compatibility of polyurethanes can be further improved by just simply mixing with the fluorinated phosphatid...The improvement of biocompatibility of polyurethanes was investigated.The results demonstrate that the blood compatibility of polyurethanes can be further improved by just simply mixing with the fluorinated phosphatidylcholine poly(carbonate urethane)s(FPCPCUs).The solution blending was done by mixing poly(ether urethane)(PEU)with FPCPCU in different compositions.An increased blood compatibility of the blend films was observed with the increase of FPCPCU content,and when FPCPCU content reached to 40 wt%(40F...展开更多
Fluorinated poly(ethylene oxide) propyl-b-polydimethylsiloxane-b-propyl fluorinated poly(ethylene oxide) (FPEO-b-PDMS-b- FPEO) was synthesized by a free radical addition of carbon-hydrogen of polyether segments ...Fluorinated poly(ethylene oxide) propyl-b-polydimethylsiloxane-b-propyl fluorinated poly(ethylene oxide) (FPEO-b-PDMS-b- FPEO) was synthesized by a free radical addition of carbon-hydrogen of polyether segments of poly(ethylene oxide) propyl-b- polydimethylsiloxane-b-propyl poty(ethylene oxide) (PEO-b-PDMS-b-PEO) to hexafluoropropylene (HFP) using tert-butyl peroxypivalate as an initiator. In order to reduce the possibility of side reaction, the protection and deprotection via silylation were used for the end-hydroxyls in PEO-b-PDMS-b-PEO chain. The structure of Intermediates and FPEO-b-PDMS-b-FPEO was confirmed by means of Fourier transform infrared and 1H NMR spectroscopy. The effects of amount of initiator, reaction temperature and time on free radical addition were investigated in detail. 2009 Xing Yuan Zhang. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.展开更多
A series of copolymers comprising butylmethacrylate, styrene, butylacrylate, hydroxypropyl acrylate and perfluoroalkyl methacrylate were synthesized by the free radical polymerization using BPO as an initiator. The su...A series of copolymers comprising butylmethacrylate, styrene, butylacrylate, hydroxypropyl acrylate and perfluoroalkyl methacrylate were synthesized by the free radical polymerization using BPO as an initiator. The surface property of the copolymer films was subsequently characterized. The contact angle measurements and energy dispersive analysis of X-ray (EDAX) show that the length and content of perfluoroalkyl side chains in the copolymers are crucial for the preparation of the film with low surface energy. At a given content of fluorinated monomers in the copolymers, the longer the perfluoroalkyl side chain, the larger the water contact angle of the copolymer films will be. On the other hand, the higher the content of fluorinated monomers, the lower the surface energy is. The water contact angle increases with the increase of the fluorinated monomer content and reaches a plateau at 3 wt% of fluorinated monomer content.展开更多
In order to find new urea cytokinins, a series of novel fluorinated heteroaromatic ureas have been designed and synthesized, The crystal structure of 3g was further determined by single crystal X-ray diffraction to ob...In order to find new urea cytokinins, a series of novel fluorinated heteroaromatic ureas have been designed and synthesized, The crystal structure of 3g was further determined by single crystal X-ray diffraction to obtain the structural feature of this class of urea compounds. The preliminary bioassay showed that some title compounds have good cytokinin activity.展开更多
Organo-soluble fluorinated polyimides were synthesized by the polycondensation of a new aromatic diamine α,α-bis(4-amino-3,5-dimethylphenyl)-4'-fluorophenyl methane with several aromatic dianhydrides.The one-ste...Organo-soluble fluorinated polyimides were synthesized by the polycondensation of a new aromatic diamine α,α-bis(4-amino-3,5-dimethylphenyl)-4'-fluorophenyl methane with several aromatic dianhydrides.The one-step polymerizationprocedure was conducted at 180℃ in m-cresol,producing the polyimides with inherent viscosities of 0.68-0.76 dL.g^(-1).Thepolyimides could be soluble not only in polar aprotic solvents,such as N-methyl-2-pyrrolidinone,and N,N-dimethylacetamide,but also in common organic solvents,such as chloroform,cyclopentanone,m-cresol and so on.Thepolyimide films show excellent transparency with the UV-Vis cut-off lengths of 310-360 nm and light transmittances ofhigher than 80% in the visible region.In addition,the polyimides exhibit good thermal stability with an initial decompositiontemperature(T_d)higher than 530℃ and have more than 60% of residual weight retentions at 700℃.展开更多
The surface phase separated structure of polyurethanes is always desired due to the advantage of better biocompatibility, compared with the homogeneous one. The key issue is how to control and characterize the surface...The surface phase separated structure of polyurethanes is always desired due to the advantage of better biocompatibility, compared with the homogeneous one. The key issue is how to control and characterize the surface morphology. In this work, we report the uppermost surface morphology of fluorinated poly(carbonate urethane)s with fluorinated side chains attached to hard segments as studied by AFM, XPS and contact angle measurement. A self-assembled micro-domain with the fluorinated side chain standing up on the uppermost surface has been proposed for polyurethane with higher fluorinated content, based on the result obtained.展开更多
A new fluorinated poly(ether amide) bearing xanthene group was prepared from 9,9-bis[4-(2-trifluoromethyl-4-aminophenox- y)phenyl]xanthene (BTFAPX) with 9,9-bis[4-(4-carboxyphenoxy)phenyl]xanthene (BCAPX) in the prese...A new fluorinated poly(ether amide) bearing xanthene group was prepared from 9,9-bis[4-(2-trifluoromethyl-4-aminophenox- y)phenyl]xanthene (BTFAPX) with 9,9-bis[4-(4-carboxyphenoxy)phenyl]xanthene (BCAPX) in the presence of triphenyl phos- phate and pyridine (Py). The polymer had the weight-average molecular weight (Mw) of 69,000 and number-average molecular weight (Mn) of 39,000, showed the glass transition temperature (Tg) of 267 ℃, 5% weight loss temperature (Tds) over 460 ℃ both in N2 and air, and char yield of 62% at 800 ℃ in N2. This polymer was amorphous and readily soluble in amide-type solvents such as N,N-dimethylacetamide (DMAc), and even in m-cressol, Py and tetrahydrofuran (THF) at room temperature, and exhibited tensile strength of 74 MPa, elongation at break of 6%, tensile moduli of 2.2 GPa. The polymer had low dielectric constant of 3.69 (100 Hz), low moisture absorption of 0.56%, and high transparency with an ultraviolet-visible absorption cut-off wavelength at 334 nm.展开更多
Three kinds of fluorinated Schiff's base esters, 4-allyloxy-2-X-6-X-benzoic acid 4-[(2, 3, 4-trifluorophenylimino)methyl]phenyl ester, where X=H or F, were synthesized and characterized. Their chemical structures w...Three kinds of fluorinated Schiff's base esters, 4-allyloxy-2-X-6-X-benzoic acid 4-[(2, 3, 4-trifluorophenylimino)methyl]phenyl ester, where X=H or F, were synthesized and characterized. Their chemical structures were identified by Fourier transform infrared spectroscopy (FTIR) and ^1H nuclear magnetic resonance (^1H NMR). Their mesomorphic properties were studied by polarized optical microscopy (POM) and differential scanning calorimetry (DSC). It was found that all the three compounds exhibited enantiotropic nematic phases only. And their cleating point temperature and thermal range of mesophase decreased with the number of fluorine atoms on the rigid core of the compounds; while their melting point temperature showed no distinct regularity.展开更多
基金supported by the National Natural Science Foundation of China(Nos.52072061,22322903,12174162)the Natural Science Foundation of Sichuan,China(No.2023NSFSC1914)21C Innovation Laboratory,Contemporary Amperex Technology Ltd.by project No.21C-OP-202103。
文摘Fluorinated carbons CF_xhold the highest theoretical energy density(e.g.,2180 W h kg^(-1)when x=1)among all cathode materials of lithium primary batteries.However,the low conductivity and severe polarization limit it to achieve its theory.In this study,we design a new electrolyte,namely 1 M LiBF_(4)DMSO:DOL(1:9 vol.),achieving a high energy density in Li/CF_xprimary cells.The DMSO with a small molecular size and high donor number successfully solvates Li^(+)into a defined Li^(+)-solvation structure.Such solvated Li^(+)can intercalate into the large-spacing carbon layers and achieve an improved capacity.Consequently,when discharged to 1.0 V,the CF_(1.12)cathode demonstrates a specific capacity of 1944 m A h g^(-1)with a specific energy density of 3793 W h kg^(-1).This strategy demonstrates that designing the electrolyte is powerful in improving the electrochemical performance of CF_(x) cathode.
基金the financial supports from the KeyArea Research and Development Program of Guangdong Province (2020B090919001)the National Natural Science Foundation of China (22078144)the Guangdong Natural Science Foundation for Basic and Applied Basic Research (2021A1515010138 and 2023A1515010686)。
文摘Li metal batteries using high-voltage layered oxides cathodes are of particular interest due to their high energy density.However,they suffer from short lifespan and extreme safety concerns,which are attributed to the degradation of layered oxides and the decomposition of electrolyte at high voltage,as well as the high reactivity of metallic Li.The key is the development of stable electrolytes against both highvoltage cathodes and Li with the formation of robust interphase films on the surfaces.Herein,we report a highly fluorinated ether,1,1,1-trifluoro-2-[(2,2,2-trifluoroethoxy)methoxy]ethane(TTME),as a cosolvent,which not only functions as a diluent forming a localized high concentration electrolyte(LHCE),but also participates in the construction of the inner solvation structure.The TTME-based electrolyte is stable itself at high voltage and induces the formation of a unique double-layer solid electrolyte interphase(SEI)film,which is embodied as one layer rich in crystalline structural components for enhanced mechanical strength and another amorphous layer with a higher concentration of organic components for enhanced flexibility.The Li||Cu cells display a noticeably high Coulombic efficiency of 99.28%after 300 cycles and Li symmetric cells maintain stable cycling more than 3200 h at 0.5 mA/cm^(2) and 1.0m Ah/cm^(2).In addition,lithium metal cells using LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) and Li CoO_(2) cathodes(both loadings~3.0 m Ah/cm^(2))realize capacity retentions of>85%over 240 cycles with a charge cut-off voltage of 4.4 V and 90%for 170 cycles with a charge cut-off voltage of 4.5 V,respectively.This study offers a bifunctional ether-based electrolyte solvent beneficial for high-voltage Li metal batteries.
基金This work is funded by National Natural Science Foundation of China(Grant No.52006115)Ministry of Science and Technology of China(Grant No.2019YFE0100200)+3 种基金National Natural Science Foundation of China(Grant No.52076121)China National Postdoctoral Program for Innovative Talents(Grant No.BX20190162)China Postdoctoral Science Foundation(Grant No.2019M660631)the Tsinghua University Initiative Scientific Research Program(Grant No.2019Z02UTY06).
文摘Fluorinated electrolytes possess good antioxidant capacity that provides high compatibility to high-voltage cathode and flame retardance;thus,they are considered as a promising solution for advanced lithium-ion batteries carrying both high-energy density and high safety.Moreover,the fluorinated electrolytes are widely used to form stable electrolyte interphase,due to their chemical reactivity with lithiated graphite or lithium.However,the influence of this reactivity on the thermal safety of batteries is seldom discussed.Herein,we demonstrate that the flame-retardant fluorinated electrolytes help to reduce the flammability,while the lithium-ion batteries with flame-retardant fluorinated electrolytes still undergo thermal runaway and disclose their different thermal runaway pathway from that of battery with conventional electrolyte.The reduction in fluorinated components(e.g.,LiPF 6 and fluoroethylene carbonate(FEC))by fully lithiated graphite accounts for a significant heat release during battery thermal runaway.The 13%of total heat is sufficient to trigger the chain reactions during battery thermal runaway.This study deepens the understanding of the thermal runaway mechanism of lithium-ion batteries employing flame-retardant fluorinated electrolytes,providing guidance on the concept of electrolyte design for safer lithium-ion batteries.
基金supported by the National Natural Science Foundation of China(52072061)21C Innovation Laboratory,Contemporary Amperex Technology Ltd.by project No.21C–OP–202103。
文摘Fluorinated carbons(CFx)have been widely applied as lithium primary batteries due to their ultra-high energy density.It will be a great promise if CFx can be rechargeable.In this study,we rationally tune the C-F bond strength for the alkaline intercalated CFx via importing an electronegative weaker element K instead of Li.It forms a ternary phase K_(x)FC instead of two phases(LiF+C)in lithium-ion batteries.Meanwhile,we choose a large layer distance and more defects CFx,namely fluorinated soft carbon,to accommodate K.Thus,we enable CFx rechargeable as a potassium-ion battery cathode.In detail fluorinated soft carbon CF_(1.01) presents a reversible specific capacity of 339 mA h g^(-1)(797 Wh kg^(-1))in the 2nd cycle and maintains 330 mA h g^(-1)(726 Wh kg^(-1))in the 15th cycle.This study reveals the importance of tuning chemical bond stability using different alkaline ions to endow batteries with rechargeability.This work provides good references for focusing on developing reversible electrode materials from popular primary cell configurations.
基金supported by the National Natural Science Foundation of China(51973157,61904123,52103061,52203066)the Science&Technology Development Fund of Tianjin Education Commission for Higher Education(2018KJ196)+3 种基金the project funded by China Postdoctoral Science Foundation(2021T140419)Tianjin Municipal College Student’Innovation and Entrepreneurship Training Program(202110058052)the National Innovation and Entrepreneurship Training Program for College Students(202110058017)the State Key Laboratory of Membrane and Membrane Separation,Tiangong University。
文摘With the popularity and widespread applications of electronics,higher demands are being placed on the performance of battery materials.Due to the large difference in electronegativity between fluorine and carbon atoms,doping fluorine atoms in nanocarbon-based materials is considered an effective way to improve the performance of used battery.However,there is still a blank in the systematic review of the mechanism and research progress of fluorine-doped nanostructured carbon materials in various batteries.In this review,the synthetic routes of fluorinated/fluorine-doped nanocarbon-based(CF_x)materials under different fluorine sources and the function mechanism of CF_x in various batteries are reviewed in detail.Subsequently,judging from the dependence between the structure and electrochemical performance of nanocarbon sources,the progress of CF_x based on different dimensions(0D–3D)for primary battery applications is reviewed and the balance between energy density and power density is critically discussed.In addition,the roles of CF_x materials in secondary batteries and their current applications in recent years are summarized in detail to illustrate the effect of introducing F atoms.Finally,we envisage the prospect of CF_x materials and offer some insights and recommendations to facilitate the further exploration of CF_x materials for various high-performance battery applications.
基金supported by Beijing Natural Science Foundation (No. 3222057)National Natural Science Foundation of China (Nos. 52277147 and 52007065)。
文摘The surface flashover of epoxy resin(EP) composites is a pivotal problem in the field of highvoltage insulation.The regulation of the interface between the filler and matrix is an effective means to suppress flashover.In this work,nano ZnO was fluorinated and grafted using lowtemperature plasma technology,and the fluorinated filler was doped into EP to study the DC surface flashover performance of the composite.The results show that plasma fluorination can effectively inhibit the agglomeration by grafting –CFxgroups onto the surface of nano-ZnO particles.The fluorine-containing groups at the interface provide higher charge binding traps and enhance the insulation strength at the interface.At the same time,the interface bond cooperation caused by plasma treatment also promoted the accelerating effect of nano ZnO on charge dissipation.The two effects synergistically improve the surface flashover performance of epoxy composites.When the concentration of fluorinated ZnO filler is 20%,the flashover voltage has the highest increase,which is 31.52% higher than that of pure EP.In addition,fluorinated ZnO can effectively reduce the dielectric constant and dielectric loss of epoxy composites.The interface interaction mechanism was further analyzed using molecular dynamics simulation and density functional theory simulation.
基金Financial support from the Fundamental Research Foundation of Beijing Institute of Technology (No.20070442005)
文摘A novel fluorinated polyurethane (FPU) with fluorine-containing pendent groups was prepared by using fluorinated polyether glycol (PTMG-g-HFP) as a soft segment, 1,6-hexamethylene diisocyanate (HDI) or toluene diisocyanate (TD1) as a hard segment and 1,4-butanodiol (BDO) as a chain extender. FTIR, ^1H NMR, ^13C NMR and GPC were used to characterize the structure of the fluorinated polyurethane. Thermal stabilities of the fluorinated polyurethane and the corresponding hydrogenated polyurethane were studied by TGA. XPS analysis at two different sampling depths for the fluorinated polyurethane was used to investigate the surface compositions of FPU. The results showed the fluorine enrichment on the surface of FPU.
基金financially supported by National Key Research and Development Program of China(Grant no.2018YFB010440)the National Natural Science Foundation of China(Grant nos.21761132030,21621091).
文摘Ethyl-(2,2,2-trifluoroethyl)carbonate(ETFEC)is investigated as a solvent component in high-voltage electrolytes for LiNi0.5Mn1.5O4(LNMO).Our results show that the self-discharge behavior and the high temperature cycle performance can be significantly improved by the addition of 10%ETFEC into the normal carbonate electrolytes,e.g.,the capacity retention improved from 65.3%to 77.1%after 200 cycles at 60℃.The main reason can be ascribed to the high stability of ETFEC which prevents large oxidation of the electrolyte on the cathode surface.In addition,we also explore the feasibility of electrolytes using single fluoriated-solvents with and without additives.Our results show that the cycle performance of LNMO material can be greatly improved in 1 MLiPF6+pure ETFEC-solvent system with 2 wt%ethylene carbonate(EC)or ethylene sulfate(DTD).The capacity retention of the LNMO materials is 93%after 300 cycles,even better than that of carbonate-based electrolytes.It is shown that the additives are oxidized on the surface of LNMO particles and contribute to the formation of cathode/electrolyte interphase(CEI)films.This composite CEI film plays a crucial role in suppressing the serious decomposition of the electrolyte at high voltage.
文摘This paper reported the oxidation of ethylbenzene catalyzed by fluorinated metalloporphyrins under mild conditions without any additives. The results showed that the cobalt(II)(5,10,15,20-tetrakis(pentafluorophenyl))porphyrin was the best catalyst among the fluorinated metalloporphyrins. The conversion of ethylbenzene reached 38.6%, the selectivity to acetophenone reached 94.0%, and the turnover number is 2719 under the optimal conditions.
基金the National Natural Science Foundation of China(Grant nos.51772089 and 21872046)the Youth 1000 Talent Program of China(Grant no.S2017JJJCQN0149)+2 种基金the Fundamental Research Funds for the Central Universitiesthe Outstanding Youth Scientist Foundation of Hunan Province(Grant no.S2019JJQNJJ0361)Natural Science Foundation of Hunan Province(Grant no.S2019JJQNJJ0361)。
文摘Lithium–sulfur(Li–S) batteries represent a "beyond Li-ion" technology with low cost and high theoretical energy density and should fulfill the ever-growing requirements of electric vehicles and stationary energy storage systems. However, the sulfur-based conversion reaction in conventional liquid electrolytes results in issues like the so-called shuttle effect of polysulfides and lithium dendrite growth, which deteriorate the electrochemical performance and safety of Li–S batteries. Optimization of conventional organic solvents(including ether and carbonate) by fluorination to form fluorinated electrolytes is a promising strategy for the practical application of Li–S batteries. The fluorinated electrolytes, owing to the high electronegativity of fluorine, possesses attractive physicochemical properties, including low melting point,high flash point, and low solubility of lithium polysulfide, and can form a compact and stable solid electrolyte interphase(SEI) with the lithium metal anode. Herein, we review recent advancements in the development of fluorinated electrolytes for use in Li–S batteries. The effect of solvent molecular structure on the performance of Li–S batteries and the formation mechanism of SEI on the cathode and anode sides are analyzed and discussed in detail. The remaining challenges and future perspectives of fluorinated electrolytes for Li–S batteries are also presented.
文摘The pressure drop during production in the near-wellbore zone of gas condensate reservoirs causes condensate formation in this area.Condensate blockage in this area causes an additional pressure drop that weakens the effective parameters of production,such as permeability.Reservoir rock wettability alteration to gas-wet through chemical treatment is one of the solutions to produce these condensates and eliminate condensate blockage in the area.In this study,an anionic fluorinated surfactant was synthesized and used for chemical treatment and carbonate rock wettability alteration.The synthesized surfactant was characterized by Fourier transform infrared spectroscopy and thermogravimetric analysis.Then,using surface tension tests,its critical micelle concentration(CMC)was determined.Contact angle experiments on chemically treated sections with surfactant solutions and spontaneous imbibition were performed to investigate the wettability alteration.Surfactant adsorption on porous media was calculated using flooding.Finally,the surfactant foamability was investigated using a Ross-Miles foam generator.According to the results,the synthesized surfactant has suitable thermal stability for use in gas condensate reservoirs.A CMC of 3500 ppm was obtained for the surfactant based on the surface tension experiments.Contact angle experiments show the ability of the surfactant to chemical treatment and wettability alteration of carbonate rocks to gas-wet so that at the constant concentration of CMC and at 373 K,the contact angles at treatment times of 30,60,120 and 240 min were obtained 87.94°,93.50°,99.79°and 106.03°,respectively.However,this ability varies at different surfactant concentrations and temperatures.The foamability test also shows the suitable stability of the foam generated by the surfactant,and a foam half-life time of 13 min was obtained for the surfactant at CMC.
基金financial support from the National Natural Science Foundation of China (Grant No. 21975260)the financial support from the National Natural Science Foundation of China (Grant No. 22078241).
文摘While serious stability issues impede the commercialization of perovskite solar cells(PSCs),two-dime nsional(2D)perovskites based on fluorinated bulky cations have emerged as more intrinsically stable materials.However,the influence of fluorination degree of the bulky aromatic cation on the per-formance of resulting PSCs has not been scrutinized.Here,2D perovskites(FxPEA)_(2)PbI_(4)(x=1,2,3,5)are grown in situ on the surface of the three-dime nsion al(3D)perovskite and dem on strate effective passivation of the surface defects of 3D perovskite.The power conversion efficiency(PCE)of the optimized devices were boosted from 20.75%for the control device to 21.09%,22.06%,22.74%and 21.86%for 2D/3D devices treated with 4-fluorophenethylamine iodide,3,5-difluorophenylethylamine iodide,2,4,5-trifluoroethylphenylethylamine iodide,and 1,2,3,4,5-pentafluorophenylethylamine iodide,respectively.We firstly reported two unexplored RP-type layered perovskites with F_(2)PEAI and F_(3)PEAI as bulky cations.The combined experimental and theoretical analysis revealed the reasons behind the various morphology,device performances,dynamic behavior,and humidity stability.The best performing F_(5)PEAI-treated device retaining 95.0%of its initial PCE under ambient atmosphere(with RH of 60%±5%)without encapsulation for 300 h storage.This work provides useful guidance for selecting fluorinated bulky cations with different molecular electronic properties,which will play an essential role in further improving the performance/stability of PSCs for the sake of further commercialization.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.50673063 and 50533050)Young Foundation of Sichuan University for Financial Support.This work was also subsidized by the Special Funds for Major State Basic Research Projects of China(No.2003CB615600).
文摘The improvement of biocompatibility of polyurethanes was investigated.The results demonstrate that the blood compatibility of polyurethanes can be further improved by just simply mixing with the fluorinated phosphatidylcholine poly(carbonate urethane)s(FPCPCUs).The solution blending was done by mixing poly(ether urethane)(PEU)with FPCPCU in different compositions.An increased blood compatibility of the blend films was observed with the increase of FPCPCU content,and when FPCPCU content reached to 40 wt%(40F...
基金supports from the National Natural Science Foundation of China(No.50273035)and Hefei Ketian Chemical Industry Co.,Ltd.
文摘Fluorinated poly(ethylene oxide) propyl-b-polydimethylsiloxane-b-propyl fluorinated poly(ethylene oxide) (FPEO-b-PDMS-b- FPEO) was synthesized by a free radical addition of carbon-hydrogen of polyether segments of poly(ethylene oxide) propyl-b- polydimethylsiloxane-b-propyl poty(ethylene oxide) (PEO-b-PDMS-b-PEO) to hexafluoropropylene (HFP) using tert-butyl peroxypivalate as an initiator. In order to reduce the possibility of side reaction, the protection and deprotection via silylation were used for the end-hydroxyls in PEO-b-PDMS-b-PEO chain. The structure of Intermediates and FPEO-b-PDMS-b-FPEO was confirmed by means of Fourier transform infrared and 1H NMR spectroscopy. The effects of amount of initiator, reaction temperature and time on free radical addition were investigated in detail. 2009 Xing Yuan Zhang. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.
基金This work was partly supported by the National Natural Science Foundation of China (No. 50273008)Qingdao Municipal Science and Technology Commission.
文摘A series of copolymers comprising butylmethacrylate, styrene, butylacrylate, hydroxypropyl acrylate and perfluoroalkyl methacrylate were synthesized by the free radical polymerization using BPO as an initiator. The surface property of the copolymer films was subsequently characterized. The contact angle measurements and energy dispersive analysis of X-ray (EDAX) show that the length and content of perfluoroalkyl side chains in the copolymers are crucial for the preparation of the film with low surface energy. At a given content of fluorinated monomers in the copolymers, the longer the perfluoroalkyl side chain, the larger the water contact angle of the copolymer films will be. On the other hand, the higher the content of fluorinated monomers, the lower the surface energy is. The water contact angle increases with the increase of the fluorinated monomer content and reaches a plateau at 3 wt% of fluorinated monomer content.
基金This work was funded by the National Natural Science Foundation of China(No.20072009)the Research Project from Hubei Provincial Department of Education(No.Q200529003).
文摘In order to find new urea cytokinins, a series of novel fluorinated heteroaromatic ureas have been designed and synthesized, The crystal structure of 3g was further determined by single crystal X-ray diffraction to obtain the structural feature of this class of urea compounds. The preliminary bioassay showed that some title compounds have good cytokinin activity.
基金This work was supported by the National Natural Science Foundation of China(NSFC)for distinguished Young Scholars(No.59925310).
文摘Organo-soluble fluorinated polyimides were synthesized by the polycondensation of a new aromatic diamine α,α-bis(4-amino-3,5-dimethylphenyl)-4'-fluorophenyl methane with several aromatic dianhydrides.The one-step polymerizationprocedure was conducted at 180℃ in m-cresol,producing the polyimides with inherent viscosities of 0.68-0.76 dL.g^(-1).Thepolyimides could be soluble not only in polar aprotic solvents,such as N-methyl-2-pyrrolidinone,and N,N-dimethylacetamide,but also in common organic solvents,such as chloroform,cyclopentanone,m-cresol and so on.Thepolyimide films show excellent transparency with the UV-Vis cut-off lengths of 310-360 nm and light transmittances ofhigher than 80% in the visible region.In addition,the polyimides exhibit good thermal stability with an initial decompositiontemperature(T_d)higher than 530℃ and have more than 60% of residual weight retentions at 700℃.
基金This work was supported by the China National Distinguished Young Investigator Fund (29925413) and the NationalNatural Science Foundation of China (Project number 50303014).
文摘The surface phase separated structure of polyurethanes is always desired due to the advantage of better biocompatibility, compared with the homogeneous one. The key issue is how to control and characterize the surface morphology. In this work, we report the uppermost surface morphology of fluorinated poly(carbonate urethane)s with fluorinated side chains attached to hard segments as studied by AFM, XPS and contact angle measurement. A self-assembled micro-domain with the fluorinated side chain standing up on the uppermost surface has been proposed for polyurethane with higher fluorinated content, based on the result obtained.
基金National Natural Science Foundation of China(No.20664001)the Research Program of Jiangxi Province Department of Education(No.2007-123,GJJ08166 and GJJ09138) for the financial support
文摘A new fluorinated poly(ether amide) bearing xanthene group was prepared from 9,9-bis[4-(2-trifluoromethyl-4-aminophenox- y)phenyl]xanthene (BTFAPX) with 9,9-bis[4-(4-carboxyphenoxy)phenyl]xanthene (BCAPX) in the presence of triphenyl phos- phate and pyridine (Py). The polymer had the weight-average molecular weight (Mw) of 69,000 and number-average molecular weight (Mn) of 39,000, showed the glass transition temperature (Tg) of 267 ℃, 5% weight loss temperature (Tds) over 460 ℃ both in N2 and air, and char yield of 62% at 800 ℃ in N2. This polymer was amorphous and readily soluble in amide-type solvents such as N,N-dimethylacetamide (DMAc), and even in m-cressol, Py and tetrahydrofuran (THF) at room temperature, and exhibited tensile strength of 74 MPa, elongation at break of 6%, tensile moduli of 2.2 GPa. The polymer had low dielectric constant of 3.69 (100 Hz), low moisture absorption of 0.56%, and high transparency with an ultraviolet-visible absorption cut-off wavelength at 334 nm.
基金the National High-Tech Research and Development Program of China (863 Program, No. 2003AA327050) the Major Project of Ministry of Education of the People’s Republic of China (No.104187).
文摘Three kinds of fluorinated Schiff's base esters, 4-allyloxy-2-X-6-X-benzoic acid 4-[(2, 3, 4-trifluorophenylimino)methyl]phenyl ester, where X=H or F, were synthesized and characterized. Their chemical structures were identified by Fourier transform infrared spectroscopy (FTIR) and ^1H nuclear magnetic resonance (^1H NMR). Their mesomorphic properties were studied by polarized optical microscopy (POM) and differential scanning calorimetry (DSC). It was found that all the three compounds exhibited enantiotropic nematic phases only. And their cleating point temperature and thermal range of mesophase decreased with the number of fluorine atoms on the rigid core of the compounds; while their melting point temperature showed no distinct regularity.