PBL-Sandwich混合教学模式在临床分子生物学检验技术实习教学中的应用

目的 探讨以问题为基础的教学法(PBL)-Sandwich混合教学模式在临床分子生物学检验技术实习教学中的应用效果。方法 选取2018-2019年进入该院分子生物学实验室实习的82例实习生作为研究对象。以2018年的42例实习生作为对照组,采用传统教学模式;以2019年的40例实习生作为试验组,采用PBL-Sandwich混合教学模式。实习结束后,采用理论考试、操作考核和问卷调查等形式评价实习生的教学效果。结果 试验组的理论考试成绩与操作考核成绩均明显高于对照组,差异均有统计学意义(P<0.05)。共发放调查问卷82份,回收有效问卷80份,其中试验组39份,对照组41份,有效回收率为97.56%(80/82)。试验组在提高学习主动性、激发学习兴趣、增强师生间的交流和互动、提升分析解决临床实际问题能力和教学方法实施满意度方面均优于对照组,差异均有统计学意义(P<0.05)。结论 PBL-Sandwich混合教学模式能有效激发实习生学习兴趣,培养实习生自主学习的主观能动性,提高分析、解决临床实际问题能力,教学质量得到提升。

案例教学法联合Sandwich教学法在老年科教学中的应用

目的探讨案例教学法联合Sandwich教学法在老年科教学中的应用效果。方法选取2022年3月—2023年6月潍坊医学院附属医院的60名参加老年科教学的学生为研究对象,按照随机数表法分为两组,各30名。对照组行常规教学,观察组行案例教学法联合Sandwich教学法教学,比较两组教学效果。结果观察组各项模拟出科考试成绩高于对照组,差异有统计学意义(P均<0.05);观察组对实习教学效果的各项满意度评分高于对照组,差异有统计学意义(P<0.05)。结论案例教学法联合Sandwich教学法可提升老年科教学的效果,并提高学生对实习教学效果的满意度。

Sandwich联合角色扮演教学法在住培医师医患沟通能力培训中的应用

目的 以腰椎穿刺术前谈话为例,探讨Sandwich联合角色扮演教学法在住院医师规范化培训(住培)学员医患沟通能力培训中的应用价值。方法 选取2019年3月至2023年1月在该院神经外科进行住培的40名学员,将其分为A、B组,每组20名。A组通过传统教学方法进行腰椎穿刺术前谈话的教学,B组运用Sandwich联合角色扮演教学法进行教学,在教学前、中、后期分别使用医患沟通技能评价量表对2组学员进行考评,最后对2组学员进行满意度问卷调查,对比2组教学效果及学员对教学的满意度。结果 2组学员在教学前测评得分均较低,在教学后测评较教学前均有提升,差异均有统计学意义(P<0.05);与A组比较,B组在教学中期测评得分明显更高,差异有统计学意义(P<0.05);2组在教学后期测评得分比较,差异无统计学意义(P>0.05)。B组住培学员的满意度高于A组,差异有统计学意义(P<0.05)。结论 Sandwich联合角色扮演教学法能快速提升学员的术前谈话沟通能力,也能提高学员的教学满意度,适合在相关教学活动中推广。

MDT+Sandwich教学法在本科内科学教学中的应用

目的探讨多学科诊疗(MDT)+“三明治”教学法(Sandwich教学法)与传统的以学科为基础的教学法在本科内科学教学中的应用效果。方法选取五年制临床医学专业60名本科生为研究对象,随机分为对照组(n=30)和试验组(n=30)。对照组采用传统的以学科为基础的教学法,试验组采用MDT+Sandwich教学法,课程结束后比较两组教学效果。结果试验组理论考试、临床技能操作考核成绩及课堂教学效果均优于对照组。结论在内科学教学中引入MDT+Sandwich教学法,能够更好地培养学生分析和解决临床问题能力。

含根量对SANDWICH形加筋土界面剪切强度影响--以红叶石楠为例

SANDWICH形加筋土是一种采用粘土夹砂层以及土工格栅而形成的混合填料形式的加筋土结构。采用一系列直接剪切试验研究含根量、竖向应力等因素对筋土界面强度的影响。试验证明,根系的加入对SANDWICH形加筋土界面最大剪应力有所提升且随着竖向应力的增大,土体抗剪强度增幅大。随着粘土中含根量的增加,筋土界面最大剪应力在不同竖向应力作用下出现先增后减的趋势。根据试验数据,利用拟合软件提出了评价筋土界面剪切强度的经验公式,得出理论上含根量的最优值为4.2%。并通过试验验证了拟合公式的有效性和正确性。

Mechanical Performance of Bio-inspired Bidirectional Corrugated Sandwich Pressure Shell Under External Hydrostatic Pressure

This paper aims to enhance the compression capacity of underwater cylindrical shells by adopting the corrugated sandwich structure of cuttlebone.The cuttlebone suffers uniaxial external compression,while underwater cylindrical shells are in a biaxial compressive stress state.To suit the biaxial compressive stress state,a novel bidirectional corrugated sandwich structure is proposed to improve the bearing capacity of cylindrical shells.The static and buckling analysis for the sandwich shell and the unstiffened cylindrical shell with the same volume-weight ratio are studied by numerical simulation.It is indicated that the proposed sandwich shell can effectively reduce the ratio between circumferential and axial stress from 2 to 1.25 and improve the critical buckling load by about 1.63 times.Numerical simulation shows that optimizing and adjusting the structural parameters could significantly improve the advantage of the sandwich shell.Then,the hydrostatic pressure tests for shell models fabricated by 3D printing are carried out.According to the experimental results,the overall failure position of the sandwich shell is at the center part of the sandwich shell.It has been found the average critical load of the proposed sandwich shell models exceeds two times that of the unstiffened shell models.Hence,the proposed bio-inspired bidirectional corrugated sandwich structure can significantly enhance the pressure resistance capability of cylindrical shells.

基于岗位胜任力的WebQuest联合Sandwich教学法在超声医学本科教学的探索

超声医学是一门理论性和实践性较强的综合性学科,对从业人员的专业知识和操作技能均有较高要求。传统超声医学本科教育存在教师单方面授课无法激发学生学习兴趣以及学生实践时间严重不足等问题,超声医学专业人才岗位胜任力的培养存在一定难度。本文基于超声医学本科教学的实际情况,探讨以岗位胜任力为导向的WebQuest联合Sandwich教学法在超声医学专业本科教育体系中的应用前景。

非k积态基于Sandwiched Renyi相对熵的关联测度

在量子信息理论中,Sandwiched Renyi相对熵具有极其重要的应用价值。该研究给出多体复合系统非k积态基于Sandwiched Renyi相对熵的关联测度,同时证明了其满足量子关联度的一些必要性质,包括非负性,酉不变性,在完全正的保迹线性映射下的单调性,联合凸性以及在非相干辅助子系统影响下的不变性。

Phonon Thermal Transport at Interfaces of a Graphene/Vertically Aligned Carbon Nanotubes/Hexagonal Boron Nitride Sandwiched Heterostructure

Molecular dynamics simulation is used to calculate the interfacial thermal resistance of a graphene/carbon nanotubes/hexagonal boron nitride(Gr/CNTs/hBN)sandwiched heterostructure,in which vertically aligned carbon nanotube(VACNT)arrays are covalently bonded to graphene and hexagonal boron nitride layers.We find that the interfacial thermal resistance(ITR)of the Gr/VACNT/hBN sandwiched heterostructure is one to two orders of magnitude smaller than the ITR of a Gr/hBN van der Waals heterostructure with the same plane size.It is observed that covalent bonding effectively enhances the phonon coupling between Gr and hBN layers,resulting in an increase in the overlap factor of phonon density of states between Gr and hBN,thus reducing the ITR of Gr and hBN.In addition,the chirality,size(diameter and length),and packing density of sandwich-layer VACNTs have an important influence on the ITR of the heterostructure.Under the same CNT diameter and length,the ITR of the sandwiched heterostructure with armchair-shaped VACNTs is higher than that of the sandwiched heterostructure with zigzag-shaped VACNTs due to the different chemical bonding of chiral CNTs with Gr and hBN.When the armchair-shaped CNT diameter increases or the length decreases,the ITR of the sandwiched heterostructure tends to decrease.Moreover,the increase in the VACNT packing density also leads to a continuous decrease in the ITR of the sandwiched heterostructure,attributed to the extremely high intrinsic thermal conductivity of CNTs and the increase of out-of-plane heat transfer channels.This work may be helpful for understanding the mechanism for ITR in multilayer vertical heterostructures,and provides theoretical guidance for a new strategy to regulate the interlayer thermal resistance of heterostructures by optimizing the design of sandwich layer thermal interface materials.

Sandwich structures with tapered tubes as core:A quasi-static investigation

In this article,the experimental and finite element analysis is utilized to investigate the quasi-static compression features of sandwich constructions built with tapered tubes.3D printing technology was utilized to create the hollow centers of the tapering tubes,with and without corrugations.The results demonstrate that the energy absorption(EA)and specific energy absorption(SEA)of the single corrugated tapered tube sandwich are 51.6% and 19.8% higher,respectively,than those of the conical tube sandwich.Furthermore,the results demonstrate that energy absorbers can benefit from corrugation in order to increase their efficiency.Additionally,the tapered corrugated tubes'resistance to oblique impacts was studied.Compared to a straight tube,the tapered tube is more resistant to oblique loads and has a lower initial peak crushing force(PCF),according to numerical simulations.After conducting a parametric study,it was discovered that the energy absorption performance of the sandwich construction is significantly affected by the amplitude,number of corrugations,and wall thickness.EA and SEA of DTS with corrugation number of 8 increased by 17.4%and 29.6%,respectively,while PCF decreased by 9.2% compared to DTS with corrugation number of 10.

Nonlinear vibration of Timoshenko FG porous sandwich beams subjected to a harmonic axial load

In this study,the instability and bifurcation diagrams of a functionally graded(FG)porous sandwich beam on an elastic,viscous foundation which is influenced by an axial load,are investigated with an analytical attitude.To do so,the Timoshenko beam theory is utilized to take the shear deformations into account,and the nonlinear Von-Karman approach is adopted to acquire the equations of motion.Then,to turn the partial differential equations(PDEs)into ordinary differential equations(ODEs)in the case of equations of motion,the method of Galerkin is employed,followed by the multiple time scale method to solve the resulting equations.The impact of parameters affecting the response of the beam,including the porosity distribution,porosity coefficient,temperature increments,slenderness,thickness,and damping ratios,are explicitly discussed.It is found that the parameters mentioned above affect the bifurcation points and instability of the sandwich porous beams,some of which,including the effect of temperature and porosity distribution,are less noticeable.

Experimental study of 3D printed carbon fibre sandwich structures for lightweight applications

Honeycomb sandwich structures are widely used in lightweight applications.Usually,these structures are subjected to extreme loading conditions,leading to potential failures due to delamination and debonding between the face sheet and the honeycomb core.Therefore,the present study is focused on the mechanical characterisation of honeycomb sandwich structures fabricated using advanced 3D printing technology.The continuous carbon fibres and ONYX-FR matrix materials have been used as raw materials for 3D printing of the specimens needed for various mechanical characterization testing;ONYX-FR is a commercial trade name for flame retardant short carbon fibre filled nylon filaments,used as a reinforcing material in Morkforged 3D printer.Edgewise and flatwise compression tests have been conducted for different configurations of honeycomb sandwich structures,fabricated by varying the face sheet thickness and core cell size,while keeping the core cell thickness and core height constant.Based on these tests,the proposed structure with face sheet thickness of 3.2 mm and a core cell size of 12.7 mm exhibited the highest energy absorption and prevented delamination and debonding failures.Therefore,3D printing technology can also be considered as an alternative method for sandwich structure fabrication.However,detailed parametric studies still need to be conducted to meet various other structural integrity criteria related to the lightweight applications.

Energy dissipation mechanism and ballistic characteristic optimization in foam sandwich panels against spherical projectile impact

This study systematically examines the energy dissipation mechanisms and ballistic characteristics of foam sandwich panels(FSP)under high-velocity impact using the explicit non-linear finite element method.Based on the geometric topology of the FSP system,three FSP configurations with the same areal density are derived,namely multi-layer,gradient core and asymmetric face sheet,and three key structural parameters are identified:core thickness(t_(c)),face sheet thickness(t_(f))and overlap face/core number(n_(o)).The ballistic performance of the FSP system is comprehensively evaluated in terms of the ballistic limit velocity(BLV),deformation modes,energy dissipation mechanism,and specific penetration energy(SPE).The results show that the FSP system exhibits a significant configuration dependence,whose ballistic performance ranking is:asymmetric face sheet>gradient core>multi-layer.The mass distribution of the top and bottom face sheets plays a critical role in the ballistic resistance of the FSP system.Both BLV and SPE increase with tf,while the raising tcor noleads to an increase in BLV but a decrease in SPE.Further,a face-core synchronous enhancement mechanism is discovered by the energy dissipation analysis,based on which the ballistic optimization procedure is also conducted and a design chart is established.This study shed light on the anti-penetration mechanism of the FSP system and might provide a theoretical basis for its engineering application.

Double casing warhead with sandwiched charge:The axial distribution of fragments velocities

The double casing warhead with sandwiched charge is a novel fragmentation warhead that can produce two groups of fragments with different velocity,and the previous work has presented a calculation formula to determine the maximum fragment velocity.The current work builds on the published formula to further develop a formula for calculating the axial distribution characteristics of the fragment velocity.For this type of warhead,the simulation of the dispersion characteristics of the detonation products at different positions shows that the detonation products at the ends have a much larger axial velocity than those in the middle,and the detonation products have a greater axial dispersion velocity when they are closer to the central axis.The loading process and the fragment velocity vary with the axial position for both casing layers,and the total velocity of the fragments is the vector sum of the radial velocity and the axial velocity.At the same axial position,the acceleration time of the inner casing is greater than that of the outer casing.For the same casing,the fragments generated at the ends have a longer acceleration time than the fragments from the middle.The proposed formula is validated with the X-ray radiography results of the four warheads previously tested experimentally and the 3D smoothedparticle hydrodynamics numerical simulation results of several series of new warheads with different configurations.The formula can accurately and reliably calculate the fragment velocity when the lengthto-diameter ratio of the charge is greater than 1.5 and the thickness of the casing is less than 20%its inner radius.This work thus provides a key reference for the theoretical analysis and the design of warheads with multiple casings.

Mechanical property of cylindrical sandwich shell with gradient core of entangled wire mesh

To explore the wide-frequency damping and vibration-attenuation performances in the application of aerospace components,the cylindrical sandwich shell structure with a gradient core of entangled wire mesh was proposed in this paper.Firstly,the gradient cores of entangled wire mesh in the axial and radial directions were prepared by using an in-house Numerical Control weaving machine,and the metallurgical connection between skin sheets and the gradient core was performed using vacuum brazing.Secondly,to investigate the mechanical properties of cylindrical sandwich shells with axial or radial gradient cores,quasi-static and dynamic mechanical experiments were carried out.The primary evaluations of mechanical properties include secant stiffness,natural frequency,Specific Energy Absorption(SEA),vibration acceleration level,and so on.The results suggest that the vibration-attenuation performance of the sandwich shell is remarkable when the high-density core layer is at the end of the shell or abuts the inner skin.The axial gradient material has almost no influence on the vibration frequencies of the shell,whereas the vibration frequencies increase dramatically when the high-density core layer approaches the skin.Moreover,compared to the conventional sandwich shells,the proposed functional grading cylindrical sandwich shell exhibits more potential in mass reduction,stiffness designing,and energy dissipation.

Ballistic performances of the hourglass lattice sandwich structures under high-velocity fragments

In this paper,the numerical simulation method is used to study the ballistic performances of hourglass lattice sandwich structures with the same mass under the vertical incidence of fragments.Attention is paid to elucidating the influences of rod cross-section dimensions,structure height,structure layer,and rod inclination angle on the deformation mode,ballistic performances,and ability to change the ballistic direction of fragments.The results show that the ballistic performances of hourglass lattice sandwich structures are mainly affected by their structural parameters.In this respect,structural parameters optimization of the hourglass lattice sandwich structures enable one to effectively improve their ballistic limit velocity and,consequently,ballistic performances.

Sandwich教学法在中医骨伤科专科护士实践的应用

目的探讨Sandwich教学法在中医骨伤专科护士实践的应用效果。方法选择40名中医骨伤科专科护士学员为研究对象,采用随机数字表法平均分为Sandwich教学法带教组(实验组)和授课为基础的教学法(LBL)带教组(对照组)。培训结束后比较两组学员理论考核、中医个案护理考核和操作考核的成绩,并调查学员对教学效果的评价。结果实验组的理论考核、中医个案护理考核以及操作考核成绩均高于对照组,差异有统计学意义(P<0.05)。与LBL教学法相比,绝大多数学员认为,应用Sandwich教学法能提高辨证施护能力、解决问题能力、思维开放能力、临床管理能力以及人际沟通能力。结论Sandwich教学法在中医骨伤科专科护士的实践教学中效果较好,值得进一步推广应用。

Sandwich联合CBL在中医内科专科护士临床带教的应用

目的观察Sandwich联合案例式教学法(CBL)在中医内科专科护士临床实践教学中的应用效果。方法将32名中医内科专科护士随机分为Sandwich联合CBL教学组(实验组)和讲授式教学法(LBL)组(对照组),各16名。在临床实践结束后,比较两组理论及技能操作成绩的差异性,并调查学员对临床教学效果的满意度。结果实验组的理论及技能操作成绩高于对照组,且病案分析题、中医四诊收集和辨证施护成绩显著优于对照组,差异有统计学意义(P<0.05)。与LBL教学法比较,绝大多数学员认为应用Sandwich联合CBL教学法更能提高自身辨证施护能力、组织协调能力、人际交往能力、思维批判能力以及科研创新能力。结论Sandwich联合CBL教学法更适合中医内科专科护士的临床带教,有利于提高学员的岗位胜任力。

Dynamic and electrical responses of a curved sandwich beam with glass reinforced laminate layers and a pliable core in the presence of a piezoelectric layer under low-velocity impact

The dynamic responses and generated voltage in a curved sandwich beam with glass reinforced laminate(GRL)layers and a pliable core in the presence of a piezoelectric layer under low-velocity impact(LVI)are investigated.The current study aims to carry out a dynamic analysis on the sandwich beam when the impactor hits the top face sheet with an initial velocity.For the layer analysis,the high-order shear deformation theory(HSDT)and Frostig's second model for the displacement fields of the core layer are used.The classical non-adhesive elastic contact theory and Hunter's principle are used to calculate the dynamic responses in terms of time.In order to validate the analytical method,the outcomes of the current investigation are compared with those gained by the experimental tests carried out by other researchers for a rectangular composite plate subject to the LVI.Finite element(FE)simulations are conducted by means of the ABAQUS software.The effects of the parameters such as foam modulus,layer material,fiber angle,impactor mass,and its velocity on the generated voltage are reviewed.

A Modified Principal Component Analysis Method for Honeycomb Sandwich Panel Debonding Recognition Based on Distributed Optical Fiber Sensing Signals

The safety and integrity requirements of aerospace composite structures necessitate real-time health monitoring throughout their service life.To this end,distributed optical fiber sensors utilizing back Rayleigh scattering have been extensively deployed in structural health monitoring due to their advantages,such as lightweight and ease of embedding.However,identifying the precise location of damage from the optical fiber signals remains a critical challenge.In this paper,a novel approach which namely Modified Sliding Window Principal Component Analysis(MSWPCA)was proposed to facilitate automatic damage identification and localization via distributed optical fiber sensors.The proposed method is able to extract signal characteristics interfered by measurement noise to improve the accuracy of damage detection.Specifically,we applied the MSWPCA method to monitor and analyze the debonding propagation process in honeycomb sandwich panel structures.Our findings demonstrate that the training model exhibits high precision in detecting the location and size of honeycomb debonding,thereby facilitating reliable and efficient online assessment of the structural health state.