Mechanical properties of foamed polyurethane solidified ballasted track

Foamed Polyurethane Solidified Ballasted Track(FPSBT),an innovative railway track,is formed by solidifying ballast bed with foamed polyurethane.Compared with the traditional Discrete Ballasted Track(DBT),FPSBT does not require regular maintenance such as tamping and cleaning.However,limited studies exist on the mechanical properties of FPSBT.In this study,Laboratory experiments are conducted on polyurethane samples to investigate the effects of polyurethane density on the mechanical properties of FPSBT.Furthermore,the performance of DBT and FPSBT with different polyurethane densities are compared,and the recommended polyurethane density is obtained.FPSBT exhibited negligible accumulation of deformation under cyclic loads,indicating excellent performance of FPSBT owing to the anti-deformation properties of polyurethane.Further,a track load vehicle test is conducted.FPSBT exhibited better load-transmitting ability than DBT.Finally,the construction and application of FPSBT in China are introduced.This study is expected to contribute to realizing a more extensive application of FPSBT.

Propagation Properties of Shock Waves in Polyurethane Foam based on Atomistic Simulations

Porous materials are widely used in the field of protection because of their excellent energy absorption characteristics.In this work,a series of polyurethane microscopic models are established and the effect of porosity on the shock waves is studied with classical molecular dynamics simulations.Firstly,shock Hugoniot relations for different porosities are obtained,which compare well with the experimental data.The pores collapse and form local stress wave,which results in the complex multi-wave structure of the shock wave.The microstructure analysis shows that the local stress increases and the local velocity decreases gradually during the process of pore collapse to complete compaction.Finally,it leads to stress relaxation and velocity homogenization.The shock stress peaks can be fitted with two exponential functions,and the amplitude of attenuation coefficient decreases with the increase of density.Besides,the pore collapse under shock or non-shock are discussed by the entropy increase rate of the system.The energy is dissipated mainly through the multiple interactions of the waves under shock.The energy is dissipated mainly by the friction between atoms under non-shock.

Experimental investigation on weak shock wave mitigation characteristics of flexible polyurethane foam and polyurea

In recent years,explosion shock wave has been considered as a signature injury of the current military conflicts.Although strong shock wave is lethal to the human body,weak shock wave can cause many more lasting consequences.To investigate the protection ability and characteristics of flexible materials and structures under weak shock wave loading,the blast wave produced by TNT explosive is loaded on the polyurethane foam with the density of 200.0 kg/m3(F-200)and 400.0 kg/m3(F-400),polyurea with the density of 1100.0 kg/m^(3)(P-1100)and structures composed of the two materials,which are intended for individual protection.Experimental results indicate that the shock wave is attenuated to weak pressure disturbance after interacting with the flexible materials which are not damaged.The shock wave protective capability of single-layer materials is dependent on their thickness,density and microscopic characteristics.The overpressure,maximum pressure rise rate and impulse of transmitted wave decrease exponentially with increase in sample thickness.For the same thickness,F-400 provides better protective capability than F-200 while P-1100 shows the best protective capability among the three materials.In this study,as the materials are not destroyed,F-200 with a thickness more than10.0 mm,F-400 with a thickness more than 4.0 mm,and P-1100 with a thickness more than 1.0 mm can attenuate the overpressure amplitude more than 90.0%.Further,multi-layer flexible composites are designed.Different layer layouts of designed structures and layer thickness of the single-layer materials can affect the protective performance.Within the research range,the structure in which polyurea is placed on the impact side shows the optimal shock wave protective performance,and the thicknesses of polyurea and polyurethane foam are 1.0 mm and 4.0 mm respectively.The overpressure attenuation rate reached maximum value of 93.3%and impulse attenuation capacity of this structure are better than those of single-layer polyurea and polyurethane foam with higher areal density.

Numerical study of forward smoldering combustionof polyurethane foam

A two-dimensional and two-phase numerical model is presented for the smolder propagation in a horizontal polyurethane foam. The chemical processes considered include endothermic pyrolysis and exotherrnic oxidation degradation of polyurethane foam and exothermic oxidation of char. The governing equations are discretized in space using the finite element method and solved by the software package FEMLAB. Predicted profiles of solid temperature as well as evolutions of solid compositions （including foam, char and ash） are presented at an airflow velocity of 0. 28 cm/s. The computed average smoldering velocity is 0. 021 4 cm/s, and the average maximum temperature is 644. 67 K. Based on the evolutions of solid compositions, the packed bed can be obviously divided into four zones： unreacted zone, fuel pyrolysis and oxidation zone, char oxidation zone and fuel burned-out zone. Simultaneously, the effects of inlet air velocity and fuel properties （including thermal conductivity, specific heat, density and pore diameter） are studied on the smoldering propagation. The results show that the smoldering velocity and temperature have a roughly linear increase with increasing inlet air velocity; the fuel density is the most important factor in determining smoldering propagation; radiation has a non-negligible role on the smoldering velocity for larger pore diameters of porous material. The computational results are compared with the experimental data and a general agreement is reached.

Electroless copper plating on microcellular polyurethane foam

In order to obtain substrates with good conductive foam for high porosity foam metal materials used in the metal electrodes,the technique of electroless copper plating on the microcellular polyurethane foam with pore size of 0.3 mm was investigated.The main factors affecting the deposition rate such as the solution composition,temperature,pH value and adding ultrasonic were explored.The results show that the optimum process conditions are CuSO4 16 g/L,HCHO 5 mL/L,NaKC4H4O6 30 g/L,Na2EDTA 20 g/L,K4Fe(CN)6 25 mg/L,pH value of 12.5-13.0 and temperature of 40-50℃.Under these technical conditions, the process has excellent bath stability.Adding ultrasonic on the process can elevate the deposition rate of copper by 20%-30%.The foam metal material with a porosity of 92.2%and a three-dimensional network structure,was fabricated by electro-deposition after the electroless copper plating.

Biodegraded and Polyurethane Drape-formed Urea Fertilizer

Natural water absorbent konjac flour participates in synthesizing biodegraded and polyurethane foamed drape, which is used to release urea slowly.The experimental results indicate that the slowly-releasing velocity of urea nitrogen and the degrading velocity of the drape can be controlled by regulating the thicknesses of drapes, the amount of konjac flour and the water content. In addition, the biodegradability of the drape was investigated by burying the specimens in earth afterwards,and results show this drape can be degraded naturally.

Synthesis of CO2 Copolymer Based Polyurethane Foams

CO2-copolymer based polyurethane foams were synthesized and characterized in this paper. The foams were found to have higher strength and lower heat of combustion than the conventional polyether polyurethane foams. They may find wide applications in many fields.

Effect of Cellular Structure on Mechanical Properties of Polyurethane Foam Curing Materials

Based on the mechanical properties and microstructure of polyurethane foam solidified material, a two-dimensional model of polyurethane foam solidified material was constructed. Polyurethane foam was obtained by fully and uniformly mixing the two components. The research was carried out through the combination of experimental test and finite element simulation. The experimental results show that when the pore density is constant, the size of the bubble hole is an important factor affecting the mechanical properties of the model. The smaller the size of the bubble hole, the less likely it is to produce stress concentration inside the model, and the stronger the resistance to material deformation. Under the random distribution, the lower the density of the polyurethane cured material, the higher the probability of damage between the adjacent bubbles, which is not conducive to the stability of the material. The density of the cured material should not be lower than 199 kg/m^3.

Broadband microwave absorption properties of polyurethane foam absorber optimized by sandwiched cross-shaped metamaterial

The effect of a sandwiched cross-shaped metamaterial absorber(CMMA) on microwave absorption properties of the double-layered polyurethane foam absorber(PUFA) is investigated. Combining with the sandwiched CMMA, the bandwidth of -10-dB reflection loss for PUFA is broadened from 7.4 GHz to 9.1 GHz, which is attributed to the overlap of two absorption peaks originating from CMMA and PUFA, respectively. The values of the two absorption peaks located at 10.15 GHz and 14.7 GHz are -38.44 dB and -40.91 dB, respectively. Additionally, distribution of surface current,electromagnetic field and power loss density are introduced to investigate the absorption mechanism of the CMMA. The electromagnetic field distribution of the double-layered PUFA and the three-layered hybrid absorber are comparatively analyzed to ascertain the influence of CMMA. The results show that the proposed hybrid absorber can be applied to the anti-electromagnetic interference and stealth technology.

Dielectric Permittivity of Rigid Rapeseed Oil Polyol Polyurethane Biofoams and Petrochemical Foams at Low Frequencies

Early investigations of dielectric permittivity of rigid polyurethane foams at low frequencies were made on petrochemical-origin foams,mainly by means of parallel plate capacitors.In the present investigation biopolyol was synthesized from Latvia-grown rapeseeds’oil by the transesterification method with triethanolamine,in an environmentally friendly process,without emission of harmful substances,at temperatures 175℃±5℃.Rigid,closed-cell rapeseed oil polyol polyurethane biofoams and petrochemical foams were made ensuring content of the renewable rapeseed oil polyol in ready foams 27 wt.%–29 wt.%.Dielectric permittivity of the polyurethane foams and the underlying monolithic petrochemical-origin polyurethane and biopolyurethane was measured with a non-destructive dielectric spectrometer equipped with a capacitive sensor of one-side access type at 16 discrete frequencies distributed geometrically over the band 10 Hz,…,330 kHz.Permittivity value of the gaseous phase in the closed-cells was estimated to beεg≈1.001 that corresponds to the values,characteristic for the most of gases.Dielectric permittivity of petrochemical polyurethane foams and the mentioned biofoams was compared with permittivity of polyurethane foams from industrial producers Sika JSC and General Plastics Manufacturing Co.Polyurethane foams of the developed formulation exhibit competitive,low dielectric permittivity,not exceeding that of the foams from industrial producers:petrochemical foams up to 550 kg/m^(3) and the mentioned biofoams,comprising the renewable rapeseed oil polyol,up to densities 230–250 kg/m^(3).Considering petrochemical-origin polyurethane foams as a heterogeneous media“Polymer—gaseous phase”,the applicability of the rule of mixture and Maxwell–Garnett equation to model mathematically the dependence of effective dielectric permittivity on the volume fraction of phases was showed.

Effect of dosage of expandable graphite,dimethyl methylphosphonate,triethanolamine,and isocyanate on fluidity,mechanical,and flame retardant properties of polyurethane materials in coal reinforcement

In this study,orthogonal experiments were conducted to investigate the influence of expandable graphite(EG),dimethyl methylphosphonate(DMMP),triethanolamine(TEA),and isocyanate content on the compressive and bonding strengths,oxygen index,and fluidity of rigid polyurethane foam(RPUF).The results revealed that EG significantly increased the oxygen index of RPUF,enlarged the diameter of foam cells,and decreased the cell-closed content in foam;thus,leading to a pressure drop in RPUF.However,excessive EG was capable of reducing the fluidity of polyurethane slurry.TEA exhibited significant influence on the compressive strength of RPUF,which dropped initially,and then increased.DMMP had a remarkable effect on the flame retardant property and compressive strength of RPUF.Compressive strength of RPUF initially displayed an increase followed by a decrease with increasing dosage of DMMP,and achieved the maximum value at DMMP dosage of 4%.DMMP could effectively reduce the diameter of RPUF cells leading to an increase in the percentage of close area in foam.DMMP displayed the flame-retardation effects mainly in the gas phase leading to a significant enhancement in the oxygen index of RPUF.Moreover,the compressive strength and bonding strength of RPUF decrease significantly with the increase of isocyanate content due to the increased blowing efficiency by the CO_2.The oxygen index and flowing length of foam increased with the increase in isocyanate dosage.

Bio-Based Trivalent Phytate:A Novel Strategy for Enhancing Fire Performance of Rigid Polyurethane Foam Composites

Biomass phytic acid has potential flame retardant value as the main form of phosphorus in plant seeds.In this study,phytate-based flame retardants aluminum phytate(PA-Al)and iron phytate(PA-Fe)were synthesized and characterized.Subsequently,they were introduced into rigid polyurethane foam(RPUF)as flame retardants by one-step water-blown method.The results indicated that RPUF/PA-Fe30 exhibited the highest char residue of 22.1 wt%,significantly higher than 12.4 wt%of RPUF.Cone calorimetry analysis showed that the total heat release(THR)of RPUF/PA-Al30 decreased by 17.0%and total smoke release(TSR)decreased by 22.0%compared with pure RPUF,which were the lowest,demonstrating a low fire risk and good smoke suppression.Thermogravimetric analysis-Fourier transform infrared spectrometer(TG-FTIR)implied the release intensity of flammable gases(hydrocarbons,esters)and toxic gases(isocyanate,CO,aromatic compounds,HCN)of composites was significantly reduced after the addition of PA-Fe.The analysis of char residue indicated that the RPUF composites formed a dense char layer with a high degree of graphitization after the addition of PA-Al/PA-Fe,endowing RPUF composites with excellent mass&heat transmission inhibition effect and fire resistance in the combustion process.

Lightweight Biobased Polyurethane Nanocomposite Foams Reinforced with Pineapple Leaf Nanofibers (PLNFs)

Pineapple leaf nanofibers(PLNFs)extracted from pineapple leaf fiber were used for reinforcing biobased polyurethane foam(BPU).The dispersion performance of PLNF in the foaming mixture system,nanocomposite foaming behavior,cell morphology,cell size,density,compressive strength and dimensional stability were investigated.The viscosity of the mixtures increased with increasing the PLNF content.The addition of a tiny amount of PLNF did not influence the exothermic temperature of the foam system,but reduced the expansion and gel time of the nanocomposite foams.This reduced time was found to increase the production efficiency.Scanning electron microscopy(SEM)images showed that the PLNF neither affected the cell shape nor size.While the density of the foam was not obviously altered with the addition of a small amount of PLNF,the compressive strength and dimensional stability were significantly improved.

Improving the Sound Absorption Properties of Flexible Polyurethane (PU) Foam using Nanofibers and Nanoparticles

Polyurethane foam as the most well-known absorbent materials has a suitable absorption coefficient only within a limited frequency range.The aim of this study was to improve the sound absorption coefficient of flexible polyurethane(PU)foam within the range of various frequencies using clay nanoparticles,polyacrylonitrile nanofibers,and polyvinylidene fluoride nanofibers.The response surface method was used to determine the effect of addition of nanofibers of PAN and PVDF,addition of clay nanoparticles,absorbent thickness,and air gap on the sound absorption coefficient of flexible polyurethane foam(PU)across different frequency ranges.The absorption coefficient of the samples was measured using Impedance Tubes device.Nano clay at low thicknesses as well as polyacrylonitrile nanofibers and polyvinyl fluoride nanofibers at higher thicknesses had a greater positive effect on absorption coefficient.The mean sound absorption coefficient in the composite with the highest absorption coefficient at middle and high frequencies was 0.798 and 0.75,respectively.In comparison with pure polyurethane foam with the same thickness and air gap,these values were 2.22 times at the middle frequencies and 1.47 times at high frequencies,respectively.Surface porosity rose with increasing nano clay,but decreased with increasing polyacrylonitrile nanofibers and polyvinyl fluoride nanofibers.The results indicated that the absorption coefficient was elevated with increasing the thickness and air gap.This study suggests that the use of a combination of nanoparticles and nanofibers can enhance the acoustic properties of flexible polyurethane foam.

Numerical Predictions of the Effective Thermal Conductivity of the Rigid Polyurethane Foam

A reconstruction method is proposed for the polyurethane foam and then a complete numerical method is developed to predict the effective thermal conductivity of the polyurethane foam. The finite volume method is applied to solve the 2D heterogeneous pure conduction. The lattice Boltzmann method is adopted to solve the 1D homogenous radiative transfer equation rather than Rosseland approximation equation. The lattice Boltzmann method is then adopted to solve 1D homogeneous conduction-radiation energy transport equation considering the combined effect of conduction and radiation. To validate the accuracy of the present method, the hot disk method is adopted to measure the effective thermal conductivity of the polyurethane foams at different temperature. The numerical results agree well with the experimental data. Then, the influences of temperature, porosity and cell size on the effective thermal conductivity of the polyurethane foam are investigated. The results show that the effective thermal conductivity of the polyurethane foams increases with temperature; and the effective thermal conductivity of the polyurethane foams decreases with increasing porosity while increases with the cell size.

Thermal Decomposition and Kinetics of Rigid Polyurethane Foams Derived from Sugarcane Bagasse

Rigid polyurethane foams were fabricated with five kinds of liquefied sugarcane bagasse polyols （LBP）. The foams derived from sugarcane bagasse were investigated by thermogravimetric analysis （TGA）, and the thermal degradation data were analyzed using the Coast-Redfern method and Ozawa method to obtain the reaction order and activation energy. The results indicate that the sugarcane bagasse-foams exhibit an excellent heat-resistant property, whereas their pyrolysis procedures are quite complicated. The reaction as first order only takes place from 250 to 400 ℃, and the pyrolysis activation energies vary from 20 to 140 kJ/mol during the whole pyrolysis process.

Viscoelastic and Thermal Properties of Polyurethane Foams Obtained from Renewable and Recyclable Components

This article deals with the study of the viscoelastic and thermal properties of polyurethane (PU) rigid foamsfrom biobased and recycled components. Rapeseed oil (RO) and recycled poly(ethylene terephthalate)(PET) were used to synthesize PU polyols. Addition of adipic acid (ADA) to polyol resulted in improvedthermal and viscoelastic properties of foam materials. ADA content was varied from 1 to 6 wt%. Results ofthe dynamic mechanical spectra indicate an increase of the storage modulus E′ and the loss modulus E″ inthe whole temperature range for specimens with higher loading of ADA. In addition, damping factor shiftedto higher temperatures, but damping intensity remained almost unaffected by the compositions. Scanningelectron microscopy of the foams’ cross sections testified that the average cells’ size of 110 mm was unaffectedby the ADA content in polyol.

Cushioning Performance of a Novel Polyurethane Foam Material Applied in Fragile Packaging

For fragile products,packaging requires cushioning protection to prevent irreversible damage from accidental falls,transportation impacts,and other causes.The new polyurethane foam(PUF)material demonstrates superior cushioning and vibration isolation performance in practical applications,effectively minimizing damage from vibrations.Drop and vibration experiments were conducted on packages comprising novel PUF,expandable polyethylene,ethylene-vinyl acetate copolymer foam,and bracelets.Results verify that the new PUF material outperforms in cushioning and vibration isolation,as observed from the acceleration response.Furthermore,a random vibration analysis of a packaging unit involving different thicknesses of PUF materials and bracelets reveals the enhanced vibration isolation effect within a specific thickness range.The vibration results of the bracelet’s outer packaging align closely with finite element simulation results,validating the effectiveness of designing and optimizing the outer packaging.Through finite element simulation,deeper understanding and prediction of the bracelet’s vibration response under various conditions is achieved,facilitating optimized packaging design for better protection and vibration damping.

The role of polyurethane foam compressible layer in the mechanical behaviour of multi-layer yielding supports for deep soft rock tunnels

The polyurethane foam(PU)compressible layer is a viable solution to the problem of damage to the secondary lining in squeezing tunnels.Nevertheless,the mechanical behaviour of the multi-layer yielding supports has not been thoroughly investigated.To fill this gap,large-scale model tests were conducted in this study.The synergistic load-bearing mechanics were analyzed using the convergenceconfinement method.Two types of multi-layer yielding supports with different thicknesses(2.5 cm,3.75 cm and 5 cm)of PU compressible layers were investigated respectively.Digital image correlation(DIC)analysis and acoustic emission(AE)techniques were used for detecting the deformation fields and damage evolution of the multi-layer yielding supports in real-time.Results indicated that the loaddisplacement relationship of the multi-layer yielding supports could be divided into the crack initiation,crack propagation,strain-hardening,and failure stages.Compared with those of the stiff support,the toughness,deformability and ultimate load of the yielding supports were increased by an average of 225%,61%and 32%,respectively.Additionally,the PU compressible layer is positioned between two primary linings to allow the yielding support to have greater mechanical properties.The analysis of the synergistic bearing effect suggested that the thickness of PU compressible layer and its location significantly affect the mechanical properties of the yielding supports.The use of yielding supports with a compressible layer positioned between the primary and secondary linings is recommended to mitigate the effects of high geo-stress in squeezing tunnels.

磷酸三丁酯负载聚氨酯泡塑萃取色层分离分光光度法测定微量铀

用2—(5—溴—2—吡啶偶氮)—5—二乙氨基苯酚(简称5—Br—PADAP)分光光度法测定铀有较高的灵敏度和选择性。但是,在样品中含铀量低,共存元素种类多,称样量大时,杂质干扰大,必须经过分离后才能测定。萃取色层分离是用于此目的的一种有效方法。有人介绍用硅球为支持体,磷酸三丁酯(TBP)为固定相,硝酸—硝酸铵溶液为移动相的萃取色层法使铀与共存元素分离,然后用5—Br—PADAP法测定。用作支持体的硅球,需先经硅烷化处理,手续繁琐。近年来,聚氨酯泡沫塑料(以下简称泡塑)