Wind and sand hazards are serious in the Milan Gobi area of the Xinjiang section of the Korla Railway. In order to ensure the safe operation of railroads, there is a need for wind and sand protection in heavily sandy ...Wind and sand hazards are serious in the Milan Gobi area of the Xinjiang section of the Korla Railway. In order to ensure the safe operation of railroads, there is a need for wind and sand protection in heavily sandy areas. The wind and sand flow in the region is notably bi-directional. To shield railroads from sand, a unique sand fence made of folded linear high-density polyethylene(HDPE) is used, aligning with the principle that the dominant wind direction is perpendicular to the fence. This study employed field observations and numerical simulations to investigate the effectiveness of these HDPE sand fences in altering flow field distribution and offering protection. It also explored how these fences affect the deposition and erosion of sand particles. Findings revealed a significant reduction in wind speed near the fence corner;the minimum horizontal wind speed on the leeward side of the first sand fence(LSF) decreased dramatically from 3 m/s to 0.64 m/s. The vortex area on the LSF markedly impacted horizontal wind speeds. Within the LSF, sand deposition was a primary occurrence. As wind speeds increased, the deposition zone shrank, whereas the positive erosion zone expanded. Close to the folded corners of the HDPE sand fence, there was a notable shift from the positive erosion zone to a deposition zone. Field tests and numerical simulations confirmed the high windproof efficiency(WE) and sand resistance efficiency(SE) in the HDPE sand fence. Folded linear HDPE sheet sand fence can effectively slow down the incoming flow and reduce the sand content, thus achieving good wind and sand protection. This study provides essential theoretical guidance for the design and improvement of wind and sand protection systems in railroad engineering.展开更多
The Milan Gobi area of the Golmud-Korla Railway in northwest China is located in the lower dispersal area of the mountain pass and has strong winds with evident double wind direction characteristics.This study introdu...The Milan Gobi area of the Golmud-Korla Railway in northwest China is located in the lower dispersal area of the mountain pass and has strong winds with evident double wind direction characteristics.This study introduced a novel sand fence deployment technique,termed‘folded linear deployment',designed to position the sand fence orthogonally to the two predominant wind directions for optimal protection.This study used wind tunnel and field tests to evaluate the wind and sand flow characteristics,as well as the windproof and sandresistant performance of folded linear HDPE(Highdensity polyethylene)board sand fences.The results suggest that the airflow around the fence creates clear zoning characteristics.The deceleration area on the BSF(backwind side of the sand fence)is much larger than that on the DSF(downwind side of the sand fence).Thus,sand particles are primarily deposited on the BSF.At different wind speeds,the airflow at 2 and 5 h on the DSF is not disturbed.The WSP(wind speed profile)presents a logarithmic distribution.The airflow is disturbed at 1-20 h on the BSF,and the WSP gradually deviates from the logarithmic law.However,as the airflow moves away from the fence,the WSP gradually approaches a logarithmic distribution.Meanwhile,the WPE(windproof efficiency)and SRE(sand-resistant efficiency)of the sand fence exceed 80%.In addition,the results of wind tunnel tests are compared with those of field tests.The overall dispersion is good,and the best dispersion is found at z/H=2.00,indicating good agreement between the two test results.This study provides a scientific basis for the design of sand hazard control measures,similar to the railway project in the Gobi Gale area.展开更多
In this research,two novel folded lattice-core sandwich cylinders were designed,manufactured,and tested.The lattice core has periodic zigzag corrugations,whose ridges and valleys are directed axially or circumferentia...In this research,two novel folded lattice-core sandwich cylinders were designed,manufactured,and tested.The lattice core has periodic zigzag corrugations,whose ridges and valleys are directed axially or circumferentially.Free vibration and axial compression experiments were performed to reveal the fundamental frequency,free vibration modes,bearing capacity,and failure mode of the cylinder.A folded lattice core effectively restricts local buckling by reducing the dimension of the local skin periodic cell,and improves the global buckling resistance by enhancing the shear stiffness of the sandwich core.The cylinders fail at the mode of material failure and possess excellent load-carrying capacity.An axially directed folded sandwich cylinder has greater load-carrying capacity,while a circumferentially directed folded sandwich cylinder has higher fundamental frequencies.These two types of folded lattices provide a selection for engineers when designing a sandwich cylinder requiring strength or vibration.This research also presents a feasible way to fabricate a large-dimensional folded structure and promote its engineering application.展开更多
By using a mapping approach and a linear variable separation approach, a new family of solitary wave solutions with arbitrary functions for the (2+1)-dimensional modified dispersive water-wave system (MDWW) is de...By using a mapping approach and a linear variable separation approach, a new family of solitary wave solutions with arbitrary functions for the (2+1)-dimensional modified dispersive water-wave system (MDWW) is derived. Based on the derived solutions and using some multi-valued functions, we obtain some novel folded localized excitations of the system.展开更多
Mercury is a promising candidate for the optical lattice clock, due to its low sensitivity to the blackbody radiation. We develop a single folded beam magneto-optical trap for the neutral mercury optical lattice clock...Mercury is a promising candidate for the optical lattice clock, due to its low sensitivity to the blackbody radiation. We develop a single folded beam magneto-optical trap for the neutral mercury optical lattice clock, with a 253. 7nm frequency quadrupled laser. Up to 1.7 × 10^6 (202Hg) or 1.5 × 10^6 (199Hg) atoms can be captured, and the atom temperature is lowered to 170μK (202Hg) or 50μK (199Hg). The cold atom signals of all six rich abundant isotopes are observed in this system.展开更多
The periodic nonuniform folded waveguides are special structures, the physical dimension of which is between the periodic folded waveguide and the tapering period folded waveguide. Therefore, the synchronization betwe...The periodic nonuniform folded waveguides are special structures, the physical dimension of which is between the periodic folded waveguide and the tapering period folded waveguide. Therefore, the synchronization between the microwave and the electron beam can be maintained in the whole interaction process and the periods are not tapered. In comparison with the tapering period folded waveguide, the theoretical analysis and the technological requirements for this structure are more convenient. In order to study this structure, the space harmonics are analysed, the conditions to make the rn-th space harmonic synchronizing with the electron beam in the whole interaction process are present, and the dispersion curve and the coupling impedance curve are obtained by the simulation software HFSS.展开更多
In this paper, the basic equations of beam-wave interaction for designing the 220 GHz folded waveguide (FW) backward wave oscillator (BWO) are described. On the whole, these equations are mainly classified into sm...In this paper, the basic equations of beam-wave interaction for designing the 220 GHz folded waveguide (FW) backward wave oscillator (BWO) are described. On the whole, these equations are mainly classified into small signal model (SSM), large signal model (LSM), and simplified small signal model (SSSM). Using these linear and nonlinear one-dimensional (1D) models, the oscillation characteristics of the FW BWO of a given configuration of slow wave struc- ture (SWS) can be calculated by numerical iteration algorithm, which is more time efficient than three-dimensional (3D) particle-in-cell (PIC) simulation. The SSSM expressed by analytical formulas is innovatively derived for determining the initial values of the FW SWS conveniently. The dispersion characteristics of the FW are obtained by equivalent circuit analysis. The space charge effect, the end reflection effect, the lossy wall effect, and the relativistic effect are all considered in our models to offer more accurate results. The design process of the FW BWO tube with output power of watt scale in a frequency range between 215 GHz and 225 GHz based on these 1D models is demonstrated. The 3D PIC method is adopted to verify the theoretical design results, which shows that they are in good agreement with each other.展开更多
Ultra-violet(UV)curing is an efficient method for composite molding.Firstly,thermophysical properties of UV cured glass-fiber reinforced plastics are conducted.Material properties are studied for various kinds of post...Ultra-violet(UV)curing is an efficient method for composite molding.Firstly,thermophysical properties of UV cured glass-fiber reinforced plastics are conducted.Material properties are studied for various kinds of postcuring modes.Then the UV curing method is suggested in manufacturing V-crimp folded core for sandwich panels.Two kinds of processing schemes for V-crimp folded core manufacturing using UV curing are presented.Finally,the effect of post-curing on the mechanical properties of folded core sandwiches is experimentally studied,and optimum modes of post-curing are determined.The experimental results show that the ultimate compressive strength of the folded sandwiches is increased by 60% after post-curing with the optimum post-curing mode.展开更多
The folded double-ridged waveguide structure is presented and its properties used for wide-band traveling-wave tube are investigated. Expressions of dispersion characteristics, normalized phase velocity and interactio...The folded double-ridged waveguide structure is presented and its properties used for wide-band traveling-wave tube are investigated. Expressions of dispersion characteristics, normalized phase velocity and interaction impedance of this structure are derived and numerically calculated. The calculated results using our theory agree well with those obtained by using the 3D electromagnetic simulation software HFSS. Influences of the ridge-loaded area and broad-wall dimensions on the high frequency characteristics of the novel slow-wave structure are discussed. It is shown that the folded double-ridged waveguide structure has a much wider relative passband than the folded waveguide slow-wave structure and a relative passband of 67% could be obtained, indicating that this structure can operate in broad-band frequency ranges of beam-wave interaction. The small signal gain property is investigated for ensuring the improvement of bandwidth. Meanwhile, with comparable dispersion characteristics, the transverse section dimension of this novel structure is much smaller than that of conventional one, which indicates an available way to reduce the weight of traveling-wave tube.展开更多
An idea to develop a family of cellular cores for sandwich panels using a technology of prepreg folding is presented.Polar folded quadra-structures are regarded as a geometric basis for these cores whose standard frag...An idea to develop a family of cellular cores for sandwich panels using a technology of prepreg folding is presented.Polar folded quadra-structures are regarded as a geometric basis for these cores whose standard fragment has the fourth degree of axial symmetry.The classification of the polar structures are described and a method of various quadra-structure synthesis is developed.A possibility to provide high strength of the structure due to preservation of faces reinforcement pattern is presented.Arrangement of the plane core on a bi-curvature surface is also introduced.Besides,provision of isotropy of the core in two or three directions are described.Finally,examples of cellular folded cores manufactured from basalt reinforced plastic are demonstrated.展开更多
In this project, a Blumlein line with a folded parallel-plates configuration using Kapton film as dielectrics was investigated. The characteristic parameters of this Blumlein line were analysed theoretically. The elec...In this project, a Blumlein line with a folded parallel-plates configuration using Kapton film as dielectrics was investigated. The characteristic parameters of this Blumlein line were analysed theoretically. The electric field distributions under different inner radii of the folded part were simulated. The output waveforms on the match load were also simulated by means of an equivalent electric circuit. According to the results of the theoretecal analysis and simulation, a Blumlein line with the folded parallel-plates configuration with an output voltage of 500 kV, a pulse duration of 100 ns, and a characteristic impedance of 4.773Ω was designed and manufactured. The experimental results properly demonstrated the wave transmitting process in the Blumlein line, and provided the voltage waveform of 500 kV and the current waveform of 50 kA with a pulse duration of 150 ns. Some engineering problems such as the edge electric breakdown and measuring precision by a resistance divider were revealed, which must be solved in future work to produce a more compact transmission line.展开更多
A period-varying folded waveguide is formed by varying the period of a folded waveguide. It has the advantages of the space harmonic selectivity and the wide bandwidth. However, the regularities of the variety of thes...A period-varying folded waveguide is formed by varying the period of a folded waveguide. It has the advantages of the space harmonic selectivity and the wide bandwidth. However, the regularities of the variety of these period-varying folded waveguides are unavailable from the published papers. In order to solve this problem, the principle of the space harmonic selectivity of a period-varying folded waveguide is analysed, and the conditions to select the space harmonic for this slow wave system are obtained. In addition, the space harmonic selectivities for a linear period-varying folded waveguide and a hyperbolic sine-varying period folded waveguide are also analysed as examples.展开更多
Based on the first-order shear deformation theory,a 3-node co-rotational triangular finite element formulation is developed for large deformation modeling of non-smooth,folded and multi-shell laminated composite struc...Based on the first-order shear deformation theory,a 3-node co-rotational triangular finite element formulation is developed for large deformation modeling of non-smooth,folded and multi-shell laminated composite structures.The two smaller components of the mid-surface normal vector of shell at a node are defined as nodal rotational variables in the co-rotational local coordinate system.In the global coordinate system,two smaller components of one vector,together with the smallest or second smallest component of another vector,of an orthogonal triad at a node on a non-smooth intersection of plates and/or shells are defined as rotational variables,whereas the two smaller components of the mid-surface normal vector at a node on the smooth part of the plate or shell(away from non-smooth intersections)are defined as rotational variables.All these vectorial rotational variables can be updated in an additive manner during an incremental solution procedure,and thus improve the computational efficiency in the nonlinear solution of these composite shell structures.Due to the commutativity of all nodal variables in calculating of the second derivatives of the local nodal variables with respect to global nodal variables,and the second derivatives of the strain energy functional with respect to local nodal variables,symmetric tangent stiffness matrices in local and global coordinate systems are obtained.To overcome shear locking,the assumed transverse shear strains obtained from the line-integration approach are employed.The reliability and computational accuracy of the present 3-node triangular shell finite element are verified through modeling two patch tests,several smooth and non-smooth laminated composite shells undergoing large displacements and large rotations.展开更多
A general solution, including three arbitrary functions, is obtained for a (2~l)-dimensional modified dispersive water-wave (MDWW) equation by means of the WTC truncation method. Introducing proper multiple valued...A general solution, including three arbitrary functions, is obtained for a (2~l)-dimensional modified dispersive water-wave (MDWW) equation by means of the WTC truncation method. Introducing proper multiple valued functions and Jacobi elliptic functions in the seed solution, special types of periodic folded waves are derived. In the long wave limit these periodic folded wave patterns may degenerate into single localized folded solitary wave excitations. The interactions of the periodic folded waves and the degenerated single folded solitary waves are investigated graphically and found to be completely elastic.展开更多
Based on the different hydrophobicities of the intermediates of proteins the various conformational intermediates of the refolding of a-amylase originally denatured with 8.0 mol/L urea solution were separated with hi...Based on the different hydrophobicities of the intermediates of proteins the various conformational intermediates of the refolding of a-amylase originally denatured with 8.0 mol/L urea solution were separated with high performance hydrophobic interaction chromatography(HPHIC). Compared to the separation of the same intermediates with weak anion exchange chromatography and size-exclusion chromatography the result obtained with HPHIC is the best It would be expected that HPHIC may be a strongly potential tool to separate intermediates of some proteins which cannot be, or cannot completely be refolded by HPHIC.展开更多
A novel silicon-on-insulator(SOI) high breakdown voltage(BV) power device with interlaced dielectric trenches(IDT) and N/P pillars is proposed. In the studied structure, the drift region is folded by IDT embedde...A novel silicon-on-insulator(SOI) high breakdown voltage(BV) power device with interlaced dielectric trenches(IDT) and N/P pillars is proposed. In the studied structure, the drift region is folded by IDT embedded in the active layer,which results in an increase of length of ionization integral remarkably. The crowding phenomenon of electric field in the corner of IDT is relieved by the N/P pillars. Both traits improve two key factors of BV, the ionization integral length and electric field magnitude, and thus BV is significantly enhanced. The electric field in the dielectric layer is enhanced and a major portion of bias is borne by the oxide layer due to the accumulation of inverse charges(holes) at the corner of IDT.The average value of the lateral electric field of the proposed device reaches 60 V/μm with a 10 μm drift length, which increases by 200% in comparison to the conventional SOI LDMOS, resulting in a breakdown voltage of 607 V.展开更多
The 60-GHz traveling-wave tube (TWT) prevails nowadays as the amplifier for the satellite communication and electronic countermeasures. The folded waveguide (FW) is a promising all-metal slow-wave structure (SWS...The 60-GHz traveling-wave tube (TWT) prevails nowadays as the amplifier for the satellite communication and electronic countermeasures. The folded waveguide (FW) is a promising all-metal slow-wave structure (SWS) for the 60-GHz TWT with advantages of robust performance, fine heat dissipation, considerable power and bandwidth. A novel FW periodically loaded with rectangular grooves is analyzed for the purpose of gaining higher power and gain. The rf characteristics are investigated by numerical simulation, and the nonlinear large- signal performance of such a TWT is analyzed by a 3I) particle-in-cell code MAGIC. Compared with normal circuits, relatively higher continuous-wave power (40-56 W) and similar bandwidth (5 GHz) are predicted by simulation. Meanwhile, the designed operation voltage is 10.5 kV, which keeps the low-voltage advantage of the popular helix TWT competitor. The novel FW will favor the design of a broadband and high-power 60-GHz TWT展开更多
The Aghajari Formation, called also the Upper Fars, develops throughout the Folded Zagros Zone and its thickness in the type section in southwest of Iran is 2966 meters. To analyze the sedimentary basin of this Format...The Aghajari Formation, called also the Upper Fars, develops throughout the Folded Zagros Zone and its thickness in the type section in southwest of Iran is 2966 meters. To analyze the sedimentary basin of this Formation, lithofacies, architectural elements and petrofacies of the related deposits in a section in southeast of Sarvestan in Fars Province of Iran with a thickness of 2221.45 meters were examined. Microscopically studying thin sections, the petrography and the occurrence of the deposits were determined. In this section, 16 lithofacies, 10 architectural elements and 2 sandstone petrofacies were identified. The lithofacies were divided into two major and minor groups, in which the major lithofacies consist of coarse-grained (Gh, Gp, Gt and Gm), medium-grained (Sh, Sp, St, Sl, Sm, Sr and Ss and fine-grained ones (Fm, Fl and Fsm), and the minor lithofacies were evaporative and mixed silisiclastic-carbonate. The identified architectural elements are CH, SB, GB, LA, DA, CR, CS, LV, LS, CH (FF) and FF. By combining evidences from facies analysis and architectural elements together, the Aghajari Formation was divided into three parts in which the related sedimentation environments, from top to bottom, are gravel, gravel-sand and fine-grained meandering river respectively. There have also been playas and shoreface in the lower part. Based on petrography, the sandstones of this formation were classified into two groups: litharenite and sublitharenite. The origin of these deposits (sandstones) was appointed to the recycled orogeny and the source of quartz is low and medium to high metamorphic rank. Using the field evidences, the paleocurrent direction was achieved indicating the direction of the paleocurrent from northwest to southeast at the time of deposition. It is hoped that these data can be used in the interpretation of the basin and reconstruction of the paleogeography in the local and regional scales.展开更多
By means of a Painlevé-Baicklund transformation and a multi-linear separation-of-variable approach, abundant localized coherent excitations of a modified Broer-Kaup system are derived. There appear possible phase...By means of a Painlevé-Baicklund transformation and a multi-linear separation-of-variable approach, abundant localized coherent excitations of a modified Broer-Kaup system are derived. There appear possible phase shifts for the interactions of the (2+1)-dimensional novel localized structures, which are discussed in this paper.展开更多
System-level fault identification is a key subject for maintaining the reliability of multiprocessor interconnected systems. This task requires fast and accurate inferences based on big volume of data, and the problem...System-level fault identification is a key subject for maintaining the reliability of multiprocessor interconnected systems. This task requires fast and accurate inferences based on big volume of data, and the problem of fault identification in an unstructured graph has been proved to be NP-hard (non-deterministic polynomial-time hard). In this paper, we adopt the PMC diagnostic model (first proposed by Preparata, Metze, and Chien) as the foundation of point-to-point probing technology, and a system contains only restricted-faults if every of its fault-free units has at least one fault-free neighbor. Under this condition we propose an efficient method of identifying restricted-faults in the folded hypercube, which is a promising alternative to the popular hypercube topology.展开更多
基金financially supported by the Chang Jiang Scholar and Innovation Team Development Plan of China (IRT_15R29)the Basic Research Innovation Group Project of Gansu Province, China (21JR7RA347)the Natural Science Foundation of Gansu Province, China (20JR10RA231)。
文摘Wind and sand hazards are serious in the Milan Gobi area of the Xinjiang section of the Korla Railway. In order to ensure the safe operation of railroads, there is a need for wind and sand protection in heavily sandy areas. The wind and sand flow in the region is notably bi-directional. To shield railroads from sand, a unique sand fence made of folded linear high-density polyethylene(HDPE) is used, aligning with the principle that the dominant wind direction is perpendicular to the fence. This study employed field observations and numerical simulations to investigate the effectiveness of these HDPE sand fences in altering flow field distribution and offering protection. It also explored how these fences affect the deposition and erosion of sand particles. Findings revealed a significant reduction in wind speed near the fence corner;the minimum horizontal wind speed on the leeward side of the first sand fence(LSF) decreased dramatically from 3 m/s to 0.64 m/s. The vortex area on the LSF markedly impacted horizontal wind speeds. Within the LSF, sand deposition was a primary occurrence. As wind speeds increased, the deposition zone shrank, whereas the positive erosion zone expanded. Close to the folded corners of the HDPE sand fence, there was a notable shift from the positive erosion zone to a deposition zone. Field tests and numerical simulations confirmed the high windproof efficiency(WE) and sand resistance efficiency(SE) in the HDPE sand fence. Folded linear HDPE sheet sand fence can effectively slow down the incoming flow and reduce the sand content, thus achieving good wind and sand protection. This study provides essential theoretical guidance for the design and improvement of wind and sand protection systems in railroad engineering.
基金financially supported by the Chang Jiang Scholar and Innovation Team Development Plan of China(IRT_15R29)the Basic Research Innovation Group Project of Gansu Province,China(21JR7RA347)the Natural Science Foundation of Gansu Province,China(20JR10RA231)。
文摘The Milan Gobi area of the Golmud-Korla Railway in northwest China is located in the lower dispersal area of the mountain pass and has strong winds with evident double wind direction characteristics.This study introduced a novel sand fence deployment technique,termed‘folded linear deployment',designed to position the sand fence orthogonally to the two predominant wind directions for optimal protection.This study used wind tunnel and field tests to evaluate the wind and sand flow characteristics,as well as the windproof and sandresistant performance of folded linear HDPE(Highdensity polyethylene)board sand fences.The results suggest that the airflow around the fence creates clear zoning characteristics.The deceleration area on the BSF(backwind side of the sand fence)is much larger than that on the DSF(downwind side of the sand fence).Thus,sand particles are primarily deposited on the BSF.At different wind speeds,the airflow at 2 and 5 h on the DSF is not disturbed.The WSP(wind speed profile)presents a logarithmic distribution.The airflow is disturbed at 1-20 h on the BSF,and the WSP gradually deviates from the logarithmic law.However,as the airflow moves away from the fence,the WSP gradually approaches a logarithmic distribution.Meanwhile,the WPE(windproof efficiency)and SRE(sand-resistant efficiency)of the sand fence exceed 80%.In addition,the results of wind tunnel tests are compared with those of field tests.The overall dispersion is good,and the best dispersion is found at z/H=2.00,indicating good agreement between the two test results.This study provides a scientific basis for the design of sand hazard control measures,similar to the railway project in the Gobi Gale area.
基金Support from the National Natural Science Foundation of China(11672130 and 11972184)the State Key Laboratory of Mechanics and Control of Mechanical Structures(MCMS-0217G03)Aerospace System Engineering Shanghai are gratefully acknowledged.
文摘In this research,two novel folded lattice-core sandwich cylinders were designed,manufactured,and tested.The lattice core has periodic zigzag corrugations,whose ridges and valleys are directed axially or circumferentially.Free vibration and axial compression experiments were performed to reveal the fundamental frequency,free vibration modes,bearing capacity,and failure mode of the cylinder.A folded lattice core effectively restricts local buckling by reducing the dimension of the local skin periodic cell,and improves the global buckling resistance by enhancing the shear stiffness of the sandwich core.The cylinders fail at the mode of material failure and possess excellent load-carrying capacity.An axially directed folded sandwich cylinder has greater load-carrying capacity,while a circumferentially directed folded sandwich cylinder has higher fundamental frequencies.These two types of folded lattices provide a selection for engineers when designing a sandwich cylinder requiring strength or vibration.This research also presents a feasible way to fabricate a large-dimensional folded structure and promote its engineering application.
基金Project supported by the Natural Science Foundation of Zhejiang Province, China (Grant Nos. Y6100257 and Y6110140)
文摘By using a mapping approach and a linear variable separation approach, a new family of solitary wave solutions with arbitrary functions for the (2+1)-dimensional modified dispersive water-wave system (MDWW) is derived. Based on the derived solutions and using some multi-valued functions, we obtain some novel folded localized excitations of the system.
基金Supported by the National Natural Science Foundation of China under Grant No 91436105the National Basic Research Program of China under Grant No 2011CB921504the Research Project of Shanghai Science and Technology Commission under Grant No 09DJ1400700
文摘Mercury is a promising candidate for the optical lattice clock, due to its low sensitivity to the blackbody radiation. We develop a single folded beam magneto-optical trap for the neutral mercury optical lattice clock, with a 253. 7nm frequency quadrupled laser. Up to 1.7 × 10^6 (202Hg) or 1.5 × 10^6 (199Hg) atoms can be captured, and the atom temperature is lowered to 170μK (202Hg) or 50μK (199Hg). The cold atom signals of all six rich abundant isotopes are observed in this system.
基金supported by the National Natural Science Foundation of China (Grant Nos 60532010 and 60401005)
文摘The periodic nonuniform folded waveguides are special structures, the physical dimension of which is between the periodic folded waveguide and the tapering period folded waveguide. Therefore, the synchronization between the microwave and the electron beam can be maintained in the whole interaction process and the periods are not tapered. In comparison with the tapering period folded waveguide, the theoretical analysis and the technological requirements for this structure are more convenient. In order to study this structure, the space harmonics are analysed, the conditions to make the rn-th space harmonic synchronizing with the electron beam in the whole interaction process are present, and the dispersion curve and the coupling impedance curve are obtained by the simulation software HFSS.
基金Project supported by the Innovative Research Foundation of China Academy of Engineering Physics(Grant No.426050502-2)
文摘In this paper, the basic equations of beam-wave interaction for designing the 220 GHz folded waveguide (FW) backward wave oscillator (BWO) are described. On the whole, these equations are mainly classified into small signal model (SSM), large signal model (LSM), and simplified small signal model (SSSM). Using these linear and nonlinear one-dimensional (1D) models, the oscillation characteristics of the FW BWO of a given configuration of slow wave struc- ture (SWS) can be calculated by numerical iteration algorithm, which is more time efficient than three-dimensional (3D) particle-in-cell (PIC) simulation. The SSSM expressed by analytical formulas is innovatively derived for determining the initial values of the FW SWS conveniently. The dispersion characteristics of the FW are obtained by equivalent circuit analysis. The space charge effect, the end reflection effect, the lossy wall effect, and the relativistic effect are all considered in our models to offer more accurate results. The design process of the FW BWO tube with output power of watt scale in a frequency range between 215 GHz and 225 GHz based on these 1D models is demonstrated. The 3D PIC method is adopted to verify the theoretical design results, which shows that they are in good agreement with each other.
基金supported by the Ministry of Education and Science of Russian Federation (No.RFMEFI57414X0078)
文摘Ultra-violet(UV)curing is an efficient method for composite molding.Firstly,thermophysical properties of UV cured glass-fiber reinforced plastics are conducted.Material properties are studied for various kinds of postcuring modes.Then the UV curing method is suggested in manufacturing V-crimp folded core for sandwich panels.Two kinds of processing schemes for V-crimp folded core manufacturing using UV curing are presented.Finally,the effect of post-curing on the mechanical properties of folded core sandwiches is experimentally studied,and optimum modes of post-curing are determined.The experimental results show that the ultimate compressive strength of the folded sandwiches is increased by 60% after post-curing with the optimum post-curing mode.
基金Project supported in part by the National Natural Science Foundation of China (Grant No. 60971038)in part by the Fundamental Research Funds for Central Universities,China (Grant No. ZYGX2009Z003)
文摘The folded double-ridged waveguide structure is presented and its properties used for wide-band traveling-wave tube are investigated. Expressions of dispersion characteristics, normalized phase velocity and interaction impedance of this structure are derived and numerically calculated. The calculated results using our theory agree well with those obtained by using the 3D electromagnetic simulation software HFSS. Influences of the ridge-loaded area and broad-wall dimensions on the high frequency characteristics of the novel slow-wave structure are discussed. It is shown that the folded double-ridged waveguide structure has a much wider relative passband than the folded waveguide slow-wave structure and a relative passband of 67% could be obtained, indicating that this structure can operate in broad-band frequency ranges of beam-wave interaction. The small signal gain property is investigated for ensuring the improvement of bandwidth. Meanwhile, with comparable dispersion characteristics, the transverse section dimension of this novel structure is much smaller than that of conventional one, which indicates an available way to reduce the weight of traveling-wave tube.
基金supported by the Ministry of Education and Science of Russian Federation (No.RFMEFI57414X0078)
文摘An idea to develop a family of cellular cores for sandwich panels using a technology of prepreg folding is presented.Polar folded quadra-structures are regarded as a geometric basis for these cores whose standard fragment has the fourth degree of axial symmetry.The classification of the polar structures are described and a method of various quadra-structure synthesis is developed.A possibility to provide high strength of the structure due to preservation of faces reinforcement pattern is presented.Arrangement of the plane core on a bi-curvature surface is also introduced.Besides,provision of isotropy of the core in two or three directions are described.Finally,examples of cellular folded cores manufactured from basalt reinforced plastic are demonstrated.
基金National Natural Science Foundation of China(No.10675168)
文摘In this project, a Blumlein line with a folded parallel-plates configuration using Kapton film as dielectrics was investigated. The characteristic parameters of this Blumlein line were analysed theoretically. The electric field distributions under different inner radii of the folded part were simulated. The output waveforms on the match load were also simulated by means of an equivalent electric circuit. According to the results of the theoretecal analysis and simulation, a Blumlein line with the folded parallel-plates configuration with an output voltage of 500 kV, a pulse duration of 100 ns, and a characteristic impedance of 4.773Ω was designed and manufactured. The experimental results properly demonstrated the wave transmitting process in the Blumlein line, and provided the voltage waveform of 500 kV and the current waveform of 50 kA with a pulse duration of 150 ns. Some engineering problems such as the edge electric breakdown and measuring precision by a resistance divider were revealed, which must be solved in future work to produce a more compact transmission line.
基金supported by the National Natural Science Foundation of China (Grant Nos 60532010 and 60401005)
文摘A period-varying folded waveguide is formed by varying the period of a folded waveguide. It has the advantages of the space harmonic selectivity and the wide bandwidth. However, the regularities of the variety of these period-varying folded waveguides are unavailable from the published papers. In order to solve this problem, the principle of the space harmonic selectivity of a period-varying folded waveguide is analysed, and the conditions to select the space harmonic for this slow wave system are obtained. In addition, the space harmonic selectivities for a linear period-varying folded waveguide and a hyperbolic sine-varying period folded waveguide are also analysed as examples.
基金This work was supported by National Natural Science Foundation of China under Grant 11672266.
文摘Based on the first-order shear deformation theory,a 3-node co-rotational triangular finite element formulation is developed for large deformation modeling of non-smooth,folded and multi-shell laminated composite structures.The two smaller components of the mid-surface normal vector of shell at a node are defined as nodal rotational variables in the co-rotational local coordinate system.In the global coordinate system,two smaller components of one vector,together with the smallest or second smallest component of another vector,of an orthogonal triad at a node on a non-smooth intersection of plates and/or shells are defined as rotational variables,whereas the two smaller components of the mid-surface normal vector at a node on the smooth part of the plate or shell(away from non-smooth intersections)are defined as rotational variables.All these vectorial rotational variables can be updated in an additive manner during an incremental solution procedure,and thus improve the computational efficiency in the nonlinear solution of these composite shell structures.Due to the commutativity of all nodal variables in calculating of the second derivatives of the local nodal variables with respect to global nodal variables,and the second derivatives of the strain energy functional with respect to local nodal variables,symmetric tangent stiffness matrices in local and global coordinate systems are obtained.To overcome shear locking,the assumed transverse shear strains obtained from the line-integration approach are employed.The reliability and computational accuracy of the present 3-node triangular shell finite element are verified through modeling two patch tests,several smooth and non-smooth laminated composite shells undergoing large displacements and large rotations.
基金supported in part by National Natural Science Foundation of China (Grant No 10772110)
文摘A general solution, including three arbitrary functions, is obtained for a (2~l)-dimensional modified dispersive water-wave (MDWW) equation by means of the WTC truncation method. Introducing proper multiple valued functions and Jacobi elliptic functions in the seed solution, special types of periodic folded waves are derived. In the long wave limit these periodic folded wave patterns may degenerate into single localized folded solitary wave excitations. The interactions of the periodic folded waves and the degenerated single folded solitary waves are investigated graphically and found to be completely elastic.
文摘Based on the different hydrophobicities of the intermediates of proteins the various conformational intermediates of the refolding of a-amylase originally denatured with 8.0 mol/L urea solution were separated with high performance hydrophobic interaction chromatography(HPHIC). Compared to the separation of the same intermediates with weak anion exchange chromatography and size-exclusion chromatography the result obtained with HPHIC is the best It would be expected that HPHIC may be a strongly potential tool to separate intermediates of some proteins which cannot be, or cannot completely be refolded by HPHIC.
基金Project supported by the Guangxi Natural Science Foundation of China(Grant Nos.2013GXNSFAA019335 and 2015GXNSFAA139300)Guangxi Experiment Center of Information Science of China(Grant No.YB1406)+2 种基金Guangxi Key Laboratory of Wireless Wideband Communication and Signal Processing of China,Key Laboratory of Cognitive Radio and Information Processing(Grant No.GXKL061505)Guangxi Key Laboratory of Automobile Components and Vehicle Technology of China(Grant No.2014KFMS04)the National Natural Science Foundation of China(Grant Nos.61361011,61274077,and 61464003)
文摘A novel silicon-on-insulator(SOI) high breakdown voltage(BV) power device with interlaced dielectric trenches(IDT) and N/P pillars is proposed. In the studied structure, the drift region is folded by IDT embedded in the active layer,which results in an increase of length of ionization integral remarkably. The crowding phenomenon of electric field in the corner of IDT is relieved by the N/P pillars. Both traits improve two key factors of BV, the ionization integral length and electric field magnitude, and thus BV is significantly enhanced. The electric field in the dielectric layer is enhanced and a major portion of bias is borne by the oxide layer due to the accumulation of inverse charges(holes) at the corner of IDT.The average value of the lateral electric field of the proposed device reaches 60 V/μm with a 10 μm drift length, which increases by 200% in comparison to the conventional SOI LDMOS, resulting in a breakdown voltage of 607 V.
基金Supported by the National Natural Science Foundation of China under Grant No 61271029the National Science Fund for Distinguished Young Scholars of China under Grant No 61125103the National Research Foundation of Korea under Grant No MSIP:NRF-2009-0083512
文摘The 60-GHz traveling-wave tube (TWT) prevails nowadays as the amplifier for the satellite communication and electronic countermeasures. The folded waveguide (FW) is a promising all-metal slow-wave structure (SWS) for the 60-GHz TWT with advantages of robust performance, fine heat dissipation, considerable power and bandwidth. A novel FW periodically loaded with rectangular grooves is analyzed for the purpose of gaining higher power and gain. The rf characteristics are investigated by numerical simulation, and the nonlinear large- signal performance of such a TWT is analyzed by a 3I) particle-in-cell code MAGIC. Compared with normal circuits, relatively higher continuous-wave power (40-56 W) and similar bandwidth (5 GHz) are predicted by simulation. Meanwhile, the designed operation voltage is 10.5 kV, which keeps the low-voltage advantage of the popular helix TWT competitor. The novel FW will favor the design of a broadband and high-power 60-GHz TWT
基金Islamic Azad University,Khorasgan(Esfahan)Branch grants commission(Grant No.238341892005)
文摘The Aghajari Formation, called also the Upper Fars, develops throughout the Folded Zagros Zone and its thickness in the type section in southwest of Iran is 2966 meters. To analyze the sedimentary basin of this Formation, lithofacies, architectural elements and petrofacies of the related deposits in a section in southeast of Sarvestan in Fars Province of Iran with a thickness of 2221.45 meters were examined. Microscopically studying thin sections, the petrography and the occurrence of the deposits were determined. In this section, 16 lithofacies, 10 architectural elements and 2 sandstone petrofacies were identified. The lithofacies were divided into two major and minor groups, in which the major lithofacies consist of coarse-grained (Gh, Gp, Gt and Gm), medium-grained (Sh, Sp, St, Sl, Sm, Sr and Ss and fine-grained ones (Fm, Fl and Fsm), and the minor lithofacies were evaporative and mixed silisiclastic-carbonate. The identified architectural elements are CH, SB, GB, LA, DA, CR, CS, LV, LS, CH (FF) and FF. By combining evidences from facies analysis and architectural elements together, the Aghajari Formation was divided into three parts in which the related sedimentation environments, from top to bottom, are gravel, gravel-sand and fine-grained meandering river respectively. There have also been playas and shoreface in the lower part. Based on petrography, the sandstones of this formation were classified into two groups: litharenite and sublitharenite. The origin of these deposits (sandstones) was appointed to the recycled orogeny and the source of quartz is low and medium to high metamorphic rank. Using the field evidences, the paleocurrent direction was achieved indicating the direction of the paleocurrent from northwest to southeast at the time of deposition. It is hoped that these data can be used in the interpretation of the basin and reconstruction of the paleogeography in the local and regional scales.
基金Project supported by the National Natural Science Foundation of China (Grant No 10272071) and the Key Assisted Academic Discipline of Zhejiang Province (Grant No 200337).
文摘By means of a Painlevé-Baicklund transformation and a multi-linear separation-of-variable approach, abundant localized coherent excitations of a modified Broer-Kaup system are derived. There appear possible phase shifts for the interactions of the (2+1)-dimensional novel localized structures, which are discussed in this paper.
基金supported in part by the NSC under Grand No.NSC102-2221-E-468-018
文摘System-level fault identification is a key subject for maintaining the reliability of multiprocessor interconnected systems. This task requires fast and accurate inferences based on big volume of data, and the problem of fault identification in an unstructured graph has been proved to be NP-hard (non-deterministic polynomial-time hard). In this paper, we adopt the PMC diagnostic model (first proposed by Preparata, Metze, and Chien) as the foundation of point-to-point probing technology, and a system contains only restricted-faults if every of its fault-free units has at least one fault-free neighbor. Under this condition we propose an efficient method of identifying restricted-faults in the folded hypercube, which is a promising alternative to the popular hypercube topology.