The study of synchronization in the periodic nonuniform folded waveguide

The periodic nonuniform folded waveguides are special structures, the physical dimension of which is between the periodic folded waveguide and the tapering period folded waveguide. Therefore, the synchronization between the microwave and the electron beam can be maintained in the whole interaction process and the periods are not tapered. In comparison with the tapering period folded waveguide, the theoretical analysis and the technological requirements for this structure are more convenient. In order to study this structure, the space harmonics are analysed, the conditions to make the rn-th space harmonic synchronizing with the electron beam in the whole interaction process are present, and the dispersion curve and the coupling impedance curve are obtained by the simulation software HFSS.

Theoretical models for designing a 220-GHz folded waveguide backward wave oscillator

In this paper, the basic equations of beam-wave interaction for designing the 220 GHz folded waveguide （FW） backward wave oscillator （BWO） are described. On the whole, these equations are mainly classified into small signal model （SSM）, large signal model （LSM）, and simplified small signal model （SSSM）. Using these linear and nonlinear one-dimensional （1D） models, the oscillation characteristics of the FW BWO of a given configuration of slow wave struc- ture （SWS） can be calculated by numerical iteration algorithm, which is more time efficient than three-dimensional （3D） particle-in-cell （PIC） simulation. The SSSM expressed by analytical formulas is innovatively derived for determining the initial values of the FW SWS conveniently. The dispersion characteristics of the FW are obtained by equivalent circuit analysis. The space charge effect, the end reflection effect, the lossy wall effect, and the relativistic effect are all considered in our models to offer more accurate results. The design process of the FW BWO tube with output power of watt scale in a frequency range between 215 GHz and 225 GHz based on these 1D models is demonstrated. The 3D PIC method is adopted to verify the theoretical design results, which shows that they are in good agreement with each other.

Analysis of space harmonic selectivity of period-varying folded waveguide

A period-varying folded waveguide is formed by varying the period of a folded waveguide. It has the advantages of the space harmonic selectivity and the wide bandwidth. However, the regularities of the variety of these period-varying folded waveguides are unavailable from the published papers. In order to solve this problem, the principle of the space harmonic selectivity of a period-varying folded waveguide is analysed, and the conditions to select the space harmonic for this slow wave system are obtained. In addition, the space harmonic selectivities for a linear period-varying folded waveguide and a hyperbolic sine-varying period folded waveguide are also analysed as examples.

Design of a Novel Folded Waveguide for 60-GHz Traveling-Wave Tubes

The 60-GHz traveling-wave tube （TWT） prevails nowadays as the amplifier for the satellite communication and electronic countermeasures. The folded waveguide （FW） is a promising all-metal slow-wave structure （SWS） for the 60-GHz TWT with advantages of robust performance, fine heat dissipation, considerable power and bandwidth. A novel FW periodically loaded with rectangular grooves is analyzed for the purpose of gaining higher power and gain. The rf characteristics are investigated by numerical simulation, and the nonlinear large- signal performance of such a TWT is analyzed by a 3I） particle-in-cell code MAGIC. Compared with normal circuits, relatively higher continuous-wave power （40-56 W） and similar bandwidth （5 GHz） are predicted by simulation. Meanwhile, the designed operation voltage is 10.5 kV, which keeps the low-voltage advantage of the popular helix TWT competitor. The novel FW will favor the design of a broadband and high-power 60-GHz TWT

Investigation of a wideband folded double-ridged waveguide slow-wave system

The folded double-ridged waveguide structure is presented and its properties used for wide-band traveling-wave tube are investigated. Expressions of dispersion characteristics, normalized phase velocity and interaction impedance of this structure are derived and numerically calculated. The calculated results using our theory agree well with those obtained by using the 3D electromagnetic simulation software HFSS. Influences of the ridge-loaded area and broad-wall dimensions on the high frequency characteristics of the novel slow-wave structure are discussed. It is shown that the folded double-ridged waveguide structure has a much wider relative passband than the folded waveguide slow-wave structure and a relative passband of 67% could be obtained, indicating that this structure can operate in broad-band frequency ranges of beam-wave interaction. The small signal gain property is investigated for ensuring the improvement of bandwidth. Meanwhile, with comparable dispersion characteristics, the transverse section dimension of this novel structure is much smaller than that of conventional one, which indicates an available way to reduce the weight of traveling-wave tube.

Design and fabrication of a sub-millimeter multi-beam folded waveguide structure

A novel multi-beam folded waveguide(MBFW) circuit,which can enhance the output power and interaction efficiency of sub-terahertz(THz) traveling wave tube(TWT),is presented in the paper. Operating with fundamental mode and multiple electron beams means that a larger beam current can be used for a higher output power. The characteristics of the MBFW structure are analyzed and optimized. Compared with the single-beam folded waveguide(SBFW) TWT,the output power of the MBFW TWT increases from 3.64 W to 25.45 W at 140 GHz and its electronic efficiency increases from 1.06% to 7.4% under the conditions of an input peak power of 10 m W,a beam voltage of 9.55 k V and a current of 12 m A. The optimized MBFW structure can be successfully fabricated by micro milling,with dimension errors below expectation,and the measured transmission characteristics are in good agreement with the design.