Experimentation of a Forced Convection Solar Dryer for Drying Sweet Potatoes at the Higher Institute of Technology of Mamou-Guinea

This study was carried out at the Mamou Higher Institute of Technology during the period from March 10 to April 15, 2022, with the aim of designing and testing a solar dryer with forced convection by drying potatoes. The dryer was designed using local materials. Its main geometric parameters are: 1) height of the drying chamber (90 cm), 2) length of the drying chamber (50 cm), 3) width of the drying chamber (43 cm), 4) surface of the racks (0.1806 m2), 5) surface of the heat accumulator (0.2537 m2). The experiment focused on the vacuum test of the dryer for two days and that of the drying of the sweet potato for three days from 8:30 a.m. to 5:30 p.m. The average vacuum test temperature values of the three environments are respectively accumulator (43°C), dryer chamber (41°C) and ambient environment (34°C). Four kilograms (4 kg) of boiled sweet potato were dried. The average temperatures in the accumulator and in the drying chamber during the three days of drying are respectively 33°C and 39°C. The final mass of the dried product is 1.2 kg, with a quantity of water extracted of 2 liters or 63% of the initial mass of the product. The average drying rate is 0.074 kg/h. The drying kinetics showed a decreasing rate in the absence of the heating period and the constant rate period.

Forced convection rheoforming process for preparation of 7075 aluminum alloy semisolid slurry and its numerical simulation

A self-developed forced convection rheoforming （FCR） machine for the preparation of light alloy semisolid slurry was introduced. The microstructure characteristics of 7075 aluminium alloy semisolid slurry at different stirring speeds prepared by the FCR process were analyzed. The experimental results suggest that with the increase of the stirring speed, the mean grain size of the semisolid decreases and the shape factor as well as the number of primary grains increase. Meanwhile, the preparation process of semisolid slurry was numerically simulated. The flow characteristics of the melt in the device and the effect of the stirring speed on temperature field and solid fraction of the melt were investigated. The simulated results show that during the preparation process of semisolid slurry, there is a complex convection within the FCR device that obviously changes the temperature field distribution and solid fraction of the melt. When the convection intensity increases, the scope of the undercooling gradient of the melt is reduced and temperature distribution is improved.

Single-Phase Forced Convection Heat Transfer in Micro Rectangular Channels

Increase in the integration and package density of aviation electronic equipment provides severe challenge to heat control for electronic components, yet the microchannel radiator offers an efficient method for solving the problem of cooling electronic chips and devices. In this paper, 6 micro rectangle channels with different sizes were designed and fabricated; the experiment of single\|phase forced convection heat transfer was conducted with solution of CH\-5OH, the most commonly used coolant for aviation electronic equipment, flowing through those microchannels. The influences of liquid velocity, degree of coolant supercooling, and configuration of microchannels on the heat transfer characteristics were analyzed respectively.

Optimal selection of annulus radius ratio to enhance heat transfer with minimum entropy generation in developing laminar forced convection of water-Al2O3 nanofluid flow

Heat transfer and entropy generation of developing laminar forced convection flow of water-Al_2O_3 nanofluid in a concentric annulus with constant heat flux on the walls is investigated numerically. In order to determine entropy generation of fully developed flow, two approaches are employed and it is shown that only one of these methods can provide appropriate results for flow inside annuli. The effects of concentration of nanoparticles, Reynolds number and thermal boundaries on heat transfer enhancement and entropy generation of developing laminar flow inside annuli with different radius ratios and same cross sectional areas are studied. The results show that radius ratio is a very important decision parameter of an annular heat exchanger such that in each Re, there is an optimum radius ratio to maximize Nu and minimize entropy generation. Moreover, the effect of nanoparticles concentration on heat transfer enhancement and minimizing entropy generation is stronger at higher Reynolds.

Effect of cooling rate and forced convection on as-cast structure of 2205 duplex stainless steel

To forecast the as-cast structure and ferrite-austenite phase ratio of 2205 duplex stainless steel(DSS), the effects of cooling rate and forced convection were observed in a high-vacuum resistance furnace in which the forced convection was created by the rotation of the crucible. The as-cast structure of all 2205 DSS samples is full equiaxed grains, and the microstructure consists of a great amount of desirable intra-granular austenite inside the continuous ferrite grain matrix, besides Widmanstatten austenite and grain boundary austenite. The ferrite grain size decreases gradually with the increase in the cooling rates(20 to 60 oC·min-1) or the forced convection, while the ferrite grains of the samples solidified with a strong convection are barely changed when the cooling rate is below 50 oC·min-1. Moreover, a small grain size is beneficial for the austenite formation but the influence is not very obvious under the cooling rates in the range of 5 to 50 oC·min-1. Compared with grain size, the cooling rate has a greater influence on the final ferrite content. A model based on the experimental results is established to predict the ferrite content, which could be approximated by δ(%) = 20.5·exp(c/80.0) + 0.34 d +34.1, where cis the cooling rate in oC·min-1 and d is the grain size in mm. By using this model, the dependence of the final ferrite content on cooling rate and grain size is well described.

Entropy generation analysis of thermally developing forced convection in fluid-saturated porous medium

Entropy generation for thermally developing forced convection in a porous medium bounded by two isothermal parallel plates is investigated analytically on the basis of the Darcy flow model where the viscous dissipation effects had also been taken into account. A parametric study showed that decreasing the group parameter and the Peclet number increases the entropy generation while for the Brinkman number the converse is true. Heatline visualization technique is applied with an emphasis on the Br 〈 0 case where there is somewhere that heat transfer changes direction at some streamwise location to the wall instead of its original direction, i.e., from the wall.

EFFECTS OF VISCOUS DISSIPATION ON THERMALLY DEVELOPING FORCED CONVECTION IN A POROUS SATURATED CIRCULAR TUBE WITH AN ISOFLUX WALL

The viscous dissipation effect on forced convection in a porous saturated circular tube with an isoflux wall is investigated on the basis of the Brinkman flow model. For the thermally developing region, a numerical study is reported while a perturbation analysis is presented to find expressions for the temperature profile and the Nusselt number for the fully developed region. The fully developed Nusselt number found by numerical solution for the developing region is compared with that of asymptotic analysis and a good degree of agreement is observed.

Two-Dimensional Simulation of the Navier-Stokes Equations for Laminar and Turbulent Flow around a Heated Square Cylinder with Forced Convection

Few studies jointly investigate thermal and turbulent effects. In general, these subjects are treated separately. The purpose of this paper is to use the Immersed Boundary Method (IBM) coupled with the Virtual Physical Model (VPM) to investigate incompressible two-dimensional Newtonian flow around a heated square cylinder at constant temperature on its surface with forced convection and turbulence. The VPM model dynamically evaluates the force that the fluid exerts on the immersed surface and the thermal exchange between both in the Reynolds numbers (Re) window 40 ≤ Re ≤ 5×103 . For simulations of turbulence the Smagorinsky and Spalart-Allmaras models are used. The first model uses the Large Eddy Simulation (LES) methodology and is based on the local equilibrium hypothesis for small scales associated with the Boussinesq hypothesis, such that the energy injected into the spectrum of the turbulence balances the energy dissipated by convective effects. The second model uses the concept Unsteady Reynolds Averaged Navier-Stokes Equations (URANS), with only one transport equation for turbulent viscosity, being calibrated in pressure gradient layers. The goal of this work is to analyse the combination of the heat-transfer phenomena with the turbulence for the thermo-fluid-structure interaction in a square cylinder. For this, it was developed a C/C++ code that requires low computational costs in regards to memory and computer facilities. It is observed that, with the increase of the Reynolds number, an increase of the drag coefficient occurs, as well as reinforces the influence of the pressure distribution downstream of the cylinder, which is strongly influenced by the formation and detachment of vortices on the upper and lower sides of the square cylinder.

Effect of Magnetic Field on Forced Convection between Two Nanofluid Laminar Flows in a Channel

This paper provides a numerical study of forced convection between hot and cold nanofluid laminar flows that are separated by a thin membrane, in a horizontal channel. Outer surface of channels＇ walls are thermally insulated and divide into two parts; namely NMP and MP. NMP is the channel＇s wall from the entrance section to the middle section of channel that is not influenced by magnetic field. MP is the channel＇s wall from the middle section to the exit section of channel which is influenced by a uniform-strength transverse magnetic field. The governing equations for both hot and cold flows are solved together using the SIMPLE algorithm. The effects of pertinent parameters, such as Reynolds number （10 ≤ Re ≤500）, Hartman number （0 ≤Ha ≤60） and the solid volume fraction of copper nano-particles （0≤φ≤0.05）, are studied. The results are reported in terms of streamlines, isotherms, velocity and temperature profiles and local and average Nusselt number. The results of the numerical simulation indicate that the increase in Reynolds number and the solid volume fraction lead to increase in Nusselt number. Meanwhile, the results also show that the rate of heat transfer between the flows increases as the Hartmann number increases, especially at higher values of the Reynolds number.

Forced convection heat transfer due to different inclination angles of splitter behind square cylinder

A numerical investigation is carried out to study the effect of splitter＇s inclination angle behind an inclined square cylinder on the forced convection heat transfer in a plan channel using the lattice Boltzmann method （LBM）. The simulations are conducted for the pertinent parameters in the following ranges： the Reynolds number Re=50-300, the gap ratio G/d = 2, and the splitter＇s inclination angle 8 = 0°-90°. The results show that with the increase in the angle of the splitter, the drag coefficient initially decreases and then increases. Moreover, the time-averaged Nusselt number at a certain angle increases noticeably.

TEMPERATURE PROFILES OF LOCAL THERMAL NONEQUILIBRIUM FOR THERMAL DEVELOPING FORCED CONVECTION IN POROUS MEDIUM PARALLEL PLATE CHANNEL

Based on the two-energy equation model, taking into account viscous dissipation due to the interaction between solid skeleton and pore fluid flow, temperature expressions of the solid skeleton and pore fluid flow are obtained analytically for the thermally developing forced convection in a saturated porous medium parallel plate channel, with walls being at constant temperature. It is proved that the temperatures of the two phases for the local thermal nonequilibrium approach to the temperature derived from the one-energy equation model for the local thermal equilibrium when the heat exchange coefficient goes to infinite. The temperature profiles are shown in figures for different dimensionless parameters and the effects of the parameters on the local thermal nonequilibrium are revealed by parameter study.

Quantitative Visualization of the Thermal Boundary Layer of Forced Convection on a Heated or Cooled Flat Plate with a 30°Leading Edge Using a Mach-Zehnder Interferometer

This study focuses on the experimental measurements of the heat transfer coefficient over a flat plate with a 30° leading edge. Under forced convection by a hot/cold air and flow over a cooled/heated flat plate, the thermal boundary layer and its thickness are quantitatively visualized and measured using a Mach-Zehnder interferometer. In addition, the variation in the local heat transfer coefficient is evaluated experimentally with respect to the air flow velocity and temperature. Differences within the heat transfer performance between the plates are confirmed and discussed. As a result, the average heat transfer performance is about the same for the heated plate and the cooled plate under all air velocity conditions. This contrasts with the theoretical prediction in the case of low air velocity, the reason considered was that the buoyancy at the 30° leading edge blocked air from flowing across the surface of the plate.

Turbulent forced convection in a heat exchanger square channel with wavy-ribs vortex generator

Turbulent forced convective heat transfer and flow con figurations in a square channel with wavy-ribs inserted diagonally are examined numerically. The in fluences of the 30° and 45° flow attack angles for wavy-ribs, blockage ratio, R B= b/H = 0.05–0.25 with single pitch ratio, R P= P/H = 1 are investigated for the Reynolds number based on the hydraulic diameter of the square channel, Re = 3000–20000. The use of the wavy-ribs, which inserted diagonal in the square channel, is aimed to help to improve the thermal performance in heat exchange systems.The finite volume method and SIMPLE algorithm are applied to the present numerical simulation. The results are presented on the periodic flow and heat transfer pro files, flow con figurations, heat transfer characteristics and the performance evaluations. The mathematical results reveal that the use of wavy-ribs leads to a higher heat transfer rate and friction loss over the smooth channel. The heat transfer enhancements are around 1.97–5.14 and 2.04–5.27 times over the smooth channel for 30° and 45° attack angles, respectively. However, the corresponding friction loss values for 30° and 45° are around 4.26–86.55 and 5.03–97.98 times higher than the smooth square channel, respectively. The optimum thermal enhancement factor on both cases is found at R B= 0.10 and the lowest Reynolds number, Re = 3000, to be about 1.47 and 1.52, respectively, for 30° and 45° wavy-ribs.

Effects of Hydromagnetic and Thermophoresis of Unsteady Forced Convection Boundary Layer Flow over Flat Plates

In this paper, we analyze unsteady two dimensional hydromagnetic forced convection boundary layer flow of a viscous incompressible fluid along flat plates with thermophoresis. The potential flow velocity has been taken as a function of the distance x and time t. The governing partial differential equations are transformed to ordinary differential equation by applying local similarity transformation. The resulting similarity equations are then solved numerically for unsteady case, applying Nachtsheim-Swigert shooting iteration technique with six order Runge-Kutta method. The variations in fluid velocity, fluid temperature and species concentration are displayed graphically and discussed for different material parameters entering into the analysis. The effects of the pertinent parameters on the skin-friction coefficient, wall heat transfer coefficient and wall deposition flux rate are also displayed in tabulated form and discussed them from the physical point of view. An analysis of the obtained results shows that the flow field is influenced appreciably by the magnetic field parameter and the thermophoresis particle deposition.

Effects Viscous Dissipation on the Asymptotic Behaviour of Laminar Forced Convection for HerscheI-Bulkley Fluid in a Circular Duct

The asymptotic behaviour of laminar forced convection in a circular duct, for a Herschel-Bulkley fluid with constant properties, is analysed by taking into account the viscous dissipation effects. The axial heat conduction in the fluid is neglected. The asymptotic temperature field and the asymptotic value of the Nusselt number are determined for every boundary condition that allows a fully developed region. Comparisons with other existing solutions for Newtonian and non-Newtonian cases are presented.

Influence of Prandtl Number on Thin Film Condensation in Forced Convection in an Inclined Wall Covered with a Porous Material

The numerical study of thin film type condensation in forced convection of a saturated pure vapor in an inclined wall covered with a porous material is presented. The generalized Darcy-Brinkman-Forchheimer (DBF) model is used to describe the flow in the porous medium while the classical boundary layer equations have been exploited in the case of a pure liquid. The dimensionless equations are solved by an implicit finite difference method and the iterative Gauss-Seidel method. The objective of this study is to examine the influence of the Prandtl number on the hydrodynamic and thermal fields but also on the local Nusselt number and on the boundary layer thickness. For Pr ≤ 0.7 (low) the velocity and the longitudinal temperature increase with the Prandtl number. On the other hand, when Pr ≥ 2 (high) the Prandtl number no longer influences the velocity and the longitudinal temperature. The local Nusselt number increases as the Prandtl number increases and the thickness of the hydrodynamic boundary layer increases as the Prandtl number decreases.

Numerical Study of Forced Convection Lid-Driven Cavity Flows Using LES （Large Eddy Simulation）

This study presents the LES （large eddy simulation） of forced convection in laminar and two dimensional turbulent flows when the flow reaches the steady state. The main purpose is the evaluation of a developed numerical methodology for the simulation of forced convection flows at various Reynolds numbers （100 _〈 Rex 〈_ 10,000） and for a fixed Prandtl number （Pr = 1.0）. The hexahedral eight-node FEM （finite element method） with an explicit Taylor-Galerkin scheme is used to obtain the numerical solutions of the conservation equations of mass, momentum and energy. The Smagorinsky model is employed for the sub-grid treatment. The time-averaged velocity and temperature profiles are compared with results of literature and a CFD （computational fluid dynamics） package based on finite volume method, leading to a highest deviation of nearly 6%. Moreover, characteristics of the forced convection flows are properly obtained, e.g., the effect of the Reynolds number over the multiplicity of scales.

Effect of boundary conditions and convection on thermally induced motion of beams subjected to internal heating

Numerical exercises are presented on the thermally induced motion of internally heated beams under various heat transfer and structural boundary conditions. The dynamic displacement and dynamic thermal moment of the beam are analyzed taking into consideration that the temperature gradient is independent as well as dependent on the beam displacement. The effect of length to thickness ratio of the beam on the thermally induced vibration is also investigated. The type of boundary conditions has its influence on the magnitude of dynamic displacement and dynamic thermal moment. A sustained thermally induced motion is observed with progress of time when the temperature gradient being evaluated is dependent on the forced convection generated due to beam motion. A finite element method (FEM) is used to solve the structural equation of motion as well as the heat transfer equation.

Diagnosis of the Forcing of Inertial-gravity Waves in a Severe Convection System

The non-hydrostatic wave equation set in Cartesian coordinates is rearranged to gain insight into wave generation in a mesoscale severe convection system. The wave equation is characterized by a wave operator on the lhs, and forcing involving three terms—linear and nonlinear terms, and diabatic heating—on the rhs. The equation was applied to a case of severe convection that occurred in East China. The calculation with simulation data showed that the diabatic forcing and linear and nonlinear forcing presented large magnitude at different altitudes in the severe convection region. Further analysis revealed the diabatic forcing due to condensational latent heating had an important influence on the generation of gravity waves in the middle and lower levels. The linear forcing resulting from the Laplacian of potential-temperature linear forcing was dominant in the middle and upper levels. The nonlinear forcing was determined by the Laplacian of potential-temperature nonlinear forcing. Therefore, the forcing of gravity waves was closely associated with the thermodynamic processes in the severe convection case. The reason may be that, besides the vertical component of pressure gradient force, the vertical oscillation of atmospheric particles was dominated by the buoyancy for inertial gravity waves. The latent heating and potential-temperature linear and nonlinear forcing played an important role in the buoyancy tendency. Consequently, these thermodynamic elements influenced the evolution of inertial-gravity waves.

Forced Convective Heat Transfer Experiment of Supercritical Water in Different Diameter of Tubes

Forced convective experiment of supercritical water was performed in Inconel-625 tubes of 4.62 mm, 7.98 mm and 10.89 mm in diameter. The water flowed upward, covering the ranges of pressure of 23.4 MPa to 25.8 MPa, mass flux of 90 kg/m^2s to 3,281 kg/m^2s, local bulk temperature of 102-384 ℃, inner wall temperature of 167-669℃ and heat flux of up to 2.41 MW/m^2. The results exhibited severe deteriorated and enhancement heat transfer. The experimental results can be calculated by the Jackson＇s correlation and the Bishop＇s correlation mostly. But some data with strong effects of the buoyancy force and the variations of flow regimes can not be predicted properly.