Forced vibration analysis of nano-composite rotating pressurized microbeam reinforced by CNTs based on MCST with temperature-variable material properties

In this study, free and forced vibration analysis of nano-composite rotating pressurized microbeam reinforced by carbon nanotubes （CNTs） under magnetic field based on modify couple stress theory （MCST） with temperature-variable material propertiesis presented. Also, the boundary conditions at two ends of nano-composite rotating pressurized microbeam reinforced by CNTs are considered as simply supported. The governing equations are obtained based on the Hamilton＇s principle and then computed these equations by using Navier＇s solution. The magnetic field is inserted in the thickness direction of the nano-composite microbeam. The effects of various parameters such as angular velocity, temperature changes, and pressure between of the inside and outside, the magnetic field, material length scale parameter, and volume fraction of nanocomposite microbeam on the natural frequency and response systemare studied. The results show that with increasing volume fraction of nano-composite microbeam, thickness, material length scale parameter, and magnetic fields, the natural frequency increases. The results of this research can be used for optimization of micro-structures and manufacturing sensors, displacement fluid, and drug delivery.

IMPROVED FABRICATION METHOD FOR CARBON NANOTUBE PROBE OF ATOMIC FORCE MICROSCOPY(AFM)

An improved arc discharge method is developed to fabricate carbon nanotube probe of atomic force microscopy （AFM） here. First, silicon probe and carbon nanotube are manipulated under an optical microscope by two high precision microtranslators. When silicon probe and carbon nanotube are very close, several tens voltage is applied between them. And carbon nanotube is divided and attached to the end of silicon probe, which mainly due to the arc welding function. Comparing with the arc discharge method before, the new method here needs no coat silicon probe with metal film in advance, which can greatly reduce the fabrication＇s difficulty. The fabricated carbon nanotube probe shows good property of higher aspect ratio and can more accurately reflect the true topography of silicon grating than silicon probe. Under the same image drive force, carbon nanotube probe had less indentation depth on soft triblock copolymer sample than silicon probe. This showed that carbon nanotube probe has lower spring constant and less damage to the scan sample than silicon probe.

THEORETICAL ANALYSIS AND EXPERIMENTAL STUDY OF CARBON NANOTUBE PROBE AND CONVENTIONAL ATOMIC FORCE MICROSCOPY PROBE ON SURFACE ROUGHNESS

In this paper, three different tips are employed, i.e., the carbon nanotube tip, monocrystalline silicon tip and silicon nitride tip. Resorting to atomic force microscope （AFM）, they are used for measuring the surface roughness of indium tin oxide （ITO） film and the immunoglobulin G （IgG） proteins within the scanning area of 10 μm×10 μm and 0.5 μm×0.5 μm, respectively. Subsequently, the scanned surface of the ITO film and IgG proteins are analyzed by using fractal dimension. The results show that the ffactal dimension measured by carbon nanotube tip is biggest with the highest frequency components and the most microscopic information. Therefore, the carbon nanotube tip is the ideal measuring tool for measuring super-smooth surface, which will play a more and more important role in the high-resolution imaging field.

Axisymmetric compressive buckling of multi-walled carbon nanotubes under different boundary conditions

The paper studies the axisymmetric compressive buckling behavior of multi-walled carbon nanotubes （MWNTs） under different boundary conditions based on continuum mechanics model. A buckling condition is derived for determining the critical buckling load and associated buckling mode of MWNTs, and numerical results are worked out for MWNTs with different aspect ratios under fixed and simply supported boundary conditions. It is shown that the critical buckling load of MWNTs is insensitive to boundary conditions, except for nanotubes with smaller radii and very small aspect ratio. The associated buckling modes for different layers of MWNTs are in-phase, and the buckling displacement ratios for different layers are independent of the boundary conditions and the length of MWNTs. Moreover, for simply supported boundary conditions, the critical buckling load is compared with the corresponding one for axial compressive buckling, which indicates that the critical buckling load for axial compressive buckling can be well approximated by the corresponding one for axisymmetric compressive buckling. In particular, for axial compressive buckling of double-walled carbon nanotubes, an analytical expression is given for approximating the critical bucklingload. The present investigation may be of some help in fur- ther understanding the mechanical properties of MWNTs.

Analysis of the Driving Factors of Carbon Emissions and Countermeasures for Carbon Emission Reduction in Hebei Province

In this paper,the quadratic polynomial and cubic polynomial functions were applied to analyze the environmental Kuznets curve(EKC)of carbon emissions in Hebei Province.The improved STIRPAT model was also applied to assess the driving factors and reduction paths for carbon emissions in Hebei Province.The results lead to three main conclusions.Firstly,carbon emissions and economic growth in Hebei Province are in a positive correlation stage which has not formed the EKC curve,and the“decoupling”stage between carbon emissions and economic growth has not arrived yet.Secondly,the industrial structure,per capita GDP,fixed assets investment,population size and urbanization rate account for the highest proportion of carbon emissions.Carbon emissions can be reduced greatly by changing the energy structure,in which the proportion of coal is decreased year by year.Environmental regulation also has an obvious effect on the reduction of carbon emissions.Thirdly,it is suggested that the reduction of carbon emissions in Hebei Province should focus on four tasks:controlling the development of heavy industry,avoiding overcapacity,optimizing the industrial structure and accelerating the development of clean energy.

Adsorption and desorption of SO_2, NO and chlorobenzene on activated carbon

Activated carbon（AC） is very effective for multi-pollutant removal; however, the complicated components in flue gas can influence each other＇s adsorption. A series of adsorption experiments for multicomponents, including SO_2, NO, chlorobenzene and H2 O,on AC were performed in a fixed-bed reactor. For single-component adsorption, the adsorption amount for chlorobenzene was larger than for SO_2 and NO on the AC. In the multi-component atmosphere, the adsorption amount decreased by 27.6% for chlorobenzene and decreased by 95.6% for NO, whereas it increased by a factor of two for SO_2,demonstrating that a complex atmosphere is unfavorable for chlorobenzene adsorption and inhibits NO adsorption. In contrast, it is very beneficial for SO_2 adsorption. The temperature-programmed desorption（TPD） results indicated that the binding strength between the gas adsorbates and the AC follows the order of SO_2〉 chlorobenzene 〉 NO. The adsorption amount is independent of the binding strength. The presence of H2 O enhanced the component effects, while it weakened the binding force between the gas adsorbates and the AC. AC oxygen functional groups were analyzed using TPD and X-ray photoelectron spectroscopy（XPS） measurements. The results reveal the reason why the chlorobenzene adsorption is less affected by the presence of other components. Lactone groups partly transform into carbonyl and quinone groups after chlorobenzene desorption. The chlorobenzene adsorption increases the number of C = O groups, which explains the positive effect of chlorobenzene on SO_2 adsorption and the strong NO adsorption.