In this paper,more than 70 large-scale pullout tests were performed to evaluate the performance of an innovative composite geosynthetic strip(CGS)reinforcement in sandy backfill.The CGS reinforcement is composed of a ...In this paper,more than 70 large-scale pullout tests were performed to evaluate the performance of an innovative composite geosynthetic strip(CGS)reinforcement in sandy backfill.The CGS reinforcement is composed of a geosynthetic strip(GS)and parts of a scrap truck tire as transverse members.The experimental pullout results for the CGS reinforcement were compared with the suggested theoretical equations and ordinary reinforcements,including the GS,the steel strip(SS),and the steel strip with rib(SSR).The pullout test results show that adding three transverse members to the GS reinforcement(CGS3)with S/H?6.6(where S and H are the space and height of the transverse members,respectively)increases pullout resistance by more than 120%,170%,and 50%compared to the GS,the SS,and the SSR,respectively.This result shows that the CGS3(CGS with three transverse members)reinforcement needs at least 55.5%,63%,and 33.3%smaller length compared to the GS,the SS,and the SSR,respectively.In general,implementation of mechanically stabilized earth wall(MSEW)with the proposed strip may help geotechnical engineers prevent costly designs and solve the problem of MSEW implementation in cases where there are limitations of space.展开更多
A numerical method of integration of Green's functions of strip element method (SEM) is proposed The response of ultrasonic source generated by a transducer on the surface of a multi ply composite plate contain...A numerical method of integration of Green's functions of strip element method (SEM) is proposed The response of ultrasonic source generated by a transducer on the surface of a multi ply composite plate containing a delamination is analyzed by the use of SEM The numerical results show that the scanning features of the ultrasonic waves may be used to identify the delamination inside the composite plate.展开更多
The principle, formula and determination of internal stresses of metal multilayer composite coatings by means of the bending strip method were studied. Using this method, internal stresses of ion-plated metal multilay...The principle, formula and determination of internal stresses of metal multilayer composite coatings by means of the bending strip method were studied. Using this method, internal stresses of ion-plated metal multilayer composite coatings and thick monolayer coating of aluminium bronze, stainless steel and nickel-iron alloy were determined. The reason of decrement in internal stresses of multilayer composite coatings was discussed.展开更多
Solid-state electrolytes(SSEs)are a solution to safety issues related to flammable organic electrolytes for Li batteries.Insufficient contact between the anode and SSE results in high interface resistance,thus causing...Solid-state electrolytes(SSEs)are a solution to safety issues related to flammable organic electrolytes for Li batteries.Insufficient contact between the anode and SSE results in high interface resistance,thus causing the batteries to exhibit high charging and discharging overpotentials.Recently,we reduced the overpotential of Li stripping and plating by introducing a high proportion of dual-conductive phases into a composite anode.The current study investigates the interface resistance and stability of a composite electrode modified with Zn and a lower proportion of dual-conductive phases.Zn-cation-adsorbed Prussian blue is synthesized as an intermediate component for a Zn-modified composite electrode(Li-FeZnNC).The Li-FeZnNC symmetric cell presents a lower interface resistance and overpotential compared with Li-FeNC(without Zn modification)and Li-symmetric cells.The Li-FeZnNC symmetric cell shows high electrochemical stability during Li stripping and plating at different current densities and high stability for 200 h.Full batteries with a Li-FeZnNC composite anode,garnet-type SSE,and LiFePO4 cathode show low charging and discharging overpotentials,a capacity of 152 mAh g^(−1),and high stability for 200 cycles.展开更多
A novel nickel stripper using ammonia as the key component was developed to substitute cyanide for removing nickel film from iron substrates. Its compositions are: ammonia 150 g/L, hydrogen peroxide 50 g/L, ammonium c...A novel nickel stripper using ammonia as the key component was developed to substitute cyanide for removing nickel film from iron substrates. Its compositions are: ammonia 150 g/L, hydrogen peroxide 50 g/L, ammonium chloride 100 g/L, EDTA 7.5 g/L, copper chloride 15 g/L and glucopyrone 1.2 g/L. The optimum operating conditions are: pH 9.511, temperature 4050 ℃ and stripping time 1 h. It shows many advantages over the traditional cyanide stripper including no toxicity, mild operation, lower cost, larger holding capacity, faster stripping rate and good protection for the base metal, and can meet the technical requirements in industry.展开更多
文摘In this paper,more than 70 large-scale pullout tests were performed to evaluate the performance of an innovative composite geosynthetic strip(CGS)reinforcement in sandy backfill.The CGS reinforcement is composed of a geosynthetic strip(GS)and parts of a scrap truck tire as transverse members.The experimental pullout results for the CGS reinforcement were compared with the suggested theoretical equations and ordinary reinforcements,including the GS,the steel strip(SS),and the steel strip with rib(SSR).The pullout test results show that adding three transverse members to the GS reinforcement(CGS3)with S/H?6.6(where S and H are the space and height of the transverse members,respectively)increases pullout resistance by more than 120%,170%,and 50%compared to the GS,the SS,and the SSR,respectively.This result shows that the CGS3(CGS with three transverse members)reinforcement needs at least 55.5%,63%,and 33.3%smaller length compared to the GS,the SS,and the SSR,respectively.In general,implementation of mechanically stabilized earth wall(MSEW)with the proposed strip may help geotechnical engineers prevent costly designs and solve the problem of MSEW implementation in cases where there are limitations of space.
基金This project is supported by National Natural Science Foundation of China(No19872011).
文摘A numerical method of integration of Green's functions of strip element method (SEM) is proposed The response of ultrasonic source generated by a transducer on the surface of a multi ply composite plate containing a delamination is analyzed by the use of SEM The numerical results show that the scanning features of the ultrasonic waves may be used to identify the delamination inside the composite plate.
文摘The principle, formula and determination of internal stresses of metal multilayer composite coatings by means of the bending strip method were studied. Using this method, internal stresses of ion-plated metal multilayer composite coatings and thick monolayer coating of aluminium bronze, stainless steel and nickel-iron alloy were determined. The reason of decrement in internal stresses of multilayer composite coatings was discussed.
基金supported by the Australian Research Council Discovery Projects(grant nos.DP200103315,DP200103332,DP220103669,and DP230100685)Linkage Projects(grant no.LP220200920).
文摘Solid-state electrolytes(SSEs)are a solution to safety issues related to flammable organic electrolytes for Li batteries.Insufficient contact between the anode and SSE results in high interface resistance,thus causing the batteries to exhibit high charging and discharging overpotentials.Recently,we reduced the overpotential of Li stripping and plating by introducing a high proportion of dual-conductive phases into a composite anode.The current study investigates the interface resistance and stability of a composite electrode modified with Zn and a lower proportion of dual-conductive phases.Zn-cation-adsorbed Prussian blue is synthesized as an intermediate component for a Zn-modified composite electrode(Li-FeZnNC).The Li-FeZnNC symmetric cell presents a lower interface resistance and overpotential compared with Li-FeNC(without Zn modification)and Li-symmetric cells.The Li-FeZnNC symmetric cell shows high electrochemical stability during Li stripping and plating at different current densities and high stability for 200 h.Full batteries with a Li-FeZnNC composite anode,garnet-type SSE,and LiFePO4 cathode show low charging and discharging overpotentials,a capacity of 152 mAh g^(−1),and high stability for 200 cycles.
文摘A novel nickel stripper using ammonia as the key component was developed to substitute cyanide for removing nickel film from iron substrates. Its compositions are: ammonia 150 g/L, hydrogen peroxide 50 g/L, ammonium chloride 100 g/L, EDTA 7.5 g/L, copper chloride 15 g/L and glucopyrone 1.2 g/L. The optimum operating conditions are: pH 9.511, temperature 4050 ℃ and stripping time 1 h. It shows many advantages over the traditional cyanide stripper including no toxicity, mild operation, lower cost, larger holding capacity, faster stripping rate and good protection for the base metal, and can meet the technical requirements in industry.
