In order to reduce the resistance and improve the hydrodynamic performance of a ship, two hull form design methods are proposed based on the potential flow theory and viscous flow theory. The flow fields are meshed us...In order to reduce the resistance and improve the hydrodynamic performance of a ship, two hull form design methods are proposed based on the potential flow theory and viscous flow theory. The flow fields are meshed using body-fitted mesh and structured grids. The parameters of the hull modification function are the design variables. A three-dimensional modeling method is used to alter the geometry. The Non-Linear Programming(NLP) method is utilized to optimize a David Taylor Model Basin(DTMB) model 5415 ship under the constraints, including the displacement constraint. The optimization results show an effective reduction of the resistance. The two hull form design methods developed in this study can provide technical support and theoretical basis for designing green ships.展开更多
Form milling cutter is built-for-purpose cutter which process the form surface, for example, usually process male and female circular arc face and form trench and so on. From the traditional concept, form milling cutt...Form milling cutter is built-for-purpose cutter which process the form surface, for example, usually process male and female circular arc face and form trench and so on. From the traditional concept, form milling cutter is divided into pointed tooth and relieving follow its structure. Relieving shaped cutter is more convenient than pointed tooth milling cutter, because only its rake face is needed to grind after it turn into blunting, so the current books which are used in college almost select relieving shaped cutter in order to introduce how to design the form milling cutter.The curve of the back of tooth of relieving cutter is the transversal which is formed by the rear face of tooth in the end cut plane of the milling cutter. In the past, because of the limit of the manufacturing technology, the curve of the back of tooth is often selected Archimedes’ curve, in order that the shovel-nose tool acquire the uniform motion when the cutter shovel the back, in other word, the rear face of the milling cutter rotate its axis by the new cutting lip, in the same time, it move uniformly to the axis in order to form the surface. Although this curve of the back of tooth meet the fixedness of the form of blade around grinding the cutter, the rear angle of the dot of the cutting lip don’t keep fixedness. With the development of the modern manufacturing technology, the unmanageable problem of many complex curves is already easily solved. So it is need to study the optimum profile of the curve of the back of tooth in theory, and study the design theory of the relieving shaped cutter under the condition of new manufacture, in order to ensure that the rear angle of the dot of the cutting lip keep fixedness after the relieving shaped cutter is grinded. The paper derive the curve profile of tooth of the form cutter and the modifier calculation formula of the profile of the cutter edge from the definition of the rear angle of the cutter, which establish the foundation for the precision design and manufacture of other form cutter.展开更多
The structure stiffness of presses has great effects on the forming precision of workpieces, especially in near-net or net shape forming. Conventionally the stiffness specification of presses is empirically determined...The structure stiffness of presses has great effects on the forming precision of workpieces, especially in near-net or net shape forming. Conventionally the stiffness specification of presses is empirically determined, resulting in poor designs with insufficient or over sufficient stiffness of press structures. In this paper, an approach for the structure design of hydraulic presses is proposed, which is forming-precision-driven and can make presses costeffective by lightweight optimization. The approach consists of five steps:(1)the determination of the press stiffness specification in terms of the forming precision requirement of workpieces;(2)the conceptual design of the press structures according to the stiffness and workspace specifications, and the structure configuration of the press;(3)the prototype design of the press structures by equivalently converting the conceptual design to prototypes;(4)the selection of key structure parameters by sensitivity analysis of the prototype design; and(5)the optimization of the prototype design. The approach is demonstrated and validated through a case study of the structure design of a 100 MN hydraulic press.展开更多
Logistic regression models for binary response problems are present in a wide variety of industrial, biological, social and medical experiments;therefore, optimum designs are a valuable tool for experimenters, leading...Logistic regression models for binary response problems are present in a wide variety of industrial, biological, social and medical experiments;therefore, optimum designs are a valuable tool for experimenters, leading to estimators of parameters with minimum variance. Our interest in this contribution is to provide explicit formulae for the D-optimal designs as a function of the unknown parameters for the logistic model where q is an indicator variable. We have considered an experiment based on the dose-response to a fly insecticide in which males and females respond in different ways, proposed in Atkinson et al. (1995) [1]. To find the D-optimal designs, this problem has been reduced to a canonical form.展开更多
The manual design of addendum surfaces on common CAD platforms is very tedious which requires many trialscorrections,which will certainly a ect the construction e ciency and quality of addendum surfaces,and then a ect...The manual design of addendum surfaces on common CAD platforms is very tedious which requires many trialscorrections,which will certainly a ect the construction e ciency and quality of addendum surfaces,and then a ect the formability and quality of the workpiece in the process of sheet forming.In this paper,an automatic procedure based on parametric design method is proposed for the rapid construction of the addendum surfaces.The kernel of the parametric method is constructing boundary curves based on the shape of surfaces of workpiece and designing guide curves based on Hermite curve interpolation.By some simple parameters,the shape of the addendum surfaces could be controlled and adjusted easily.In addition,a minimum energy optimization method is employed to further optimize the constructed addendum surface.A finite element analysis for the sheet forming process is performed to evaluate the forming quality of constructed addendum surfaces.The instance illustrates that the addendum surface constructed by the proposed method could ensure both the overall smoothing of surfaces and the final forming quality,and it has a good e ect on springback after forming.This research proposes a smoothing parametric design method for addendum surfaces construction which could construct and optimize addendum surfaces rapidly.展开更多
A new effective tool design of three-rank form of electroremoval was present using a precision recycle system offering faster performance in removing the indium-tin-oxide(ITO) thin-films on color filter surface of dis...A new effective tool design of three-rank form of electroremoval was present using a precision recycle system offering faster performance in removing the indium-tin-oxide(ITO) thin-films on color filter surface of displays. Higher electric power is not required since the three-rank form tool is adopted as a feeding mode to reduce the response area. The low yield of ITO persists throughout the entire semiconductor production process. By establishing a recycle process of ultra-precise removal of the thin-film nanostructure, defective products in the optoelectronic semiconductors industry can be effectively recycled, decreasing both production costs and pollution. A 5th generation TFT-LCD was used. The design features of the removal processes for the thin-films and the tool design of three-rank form were of major interest. For the precision removal processes, a pulsed current can improve the effect of dreg discharge and contributes to the achievement of a fast workpiece (displays' color filter) feed rate, but raises the current rating. High flow velocity of the electrolyte with a high rotational speed of the tool electrodes elevates the ITO removal effect. A displays' color filter with a fast feed rate is combined with enough electric power to provide highly effective removal. A small thickness of the rank and a small arc angle of the negative-electrode correspond to a higher removal rate for ITO-film. An effective three-rank form negative-electrode provides larger discharge mobility and better removal effect. It only needs a short period of time to remove the ITO easily and cleanly.展开更多
The paper introduces effective and straightforward algorithms of both explicit and implicit model-following designs with state derivative measurement feedback in novel reciprocal state space form (RSS) to handle state...The paper introduces effective and straightforward algorithms of both explicit and implicit model-following designs with state derivative measurement feedback in novel reciprocal state space form (RSS) to handle state derivative related performance output and state related performance output design cases. Applying proposed algorithms, no integrators are required. Consequently, implementation is simple and low-cost. Simulation has also been carried out to verify the proposed algorithms. Since acceleration can only be modeled as state derivative in state space form and micro-accelerometer which is the state derivative sensor is getting more and more attentions in many microelectromechanical and nanoelectromechanical systems (MEMS/NEMS) applications, the proposed algorithms are suitable for MEMS/NEMS systems installed with micro-accelerometers.展开更多
基金Supported by the Ministry of Research,Technology,and Higher Education Republic of Indonesia,through the Budget Implementation List(DIPA)of Diponegoro University,Grant No.DIPA-023.04.02.189185/2014,December 05,2013
文摘优化分析和计算液体动力学(CFD ) 同时被使用了，在哪个一个参量的模型在发现最佳的答案起一个重要作用。然而，与不规则的曲线为复杂形状创造一个参量的模型是困难的，例如一种海底的壳形式。在这研究，立方的 Bezier 曲线和曲线飞机交叉方法被用来产生考虑三个输入参数的一种参量的海底的壳形式的一个稳固的模型：鼻子半径，尾巴半径，和长度高度壳比率(L/H ) 。应用程序接口(API ) 脚本也被用来在 ANSYS 设计 modeler 写代码。结果证明海底的形状能与输入参数的某变化被产生。一个例子被给那显示出建议方法怎么能成功地被用于一个壳抵抗优化盒子。中间的海底的类型的参量的设计被选择被修改。首先，预先，原来的海底的模型用 CFD 被分析。然后，使用反应表面图，某候选人有一个最小的壳抵抗系数的最佳的图案被获得。进一步，在目标驱动的优化(GDO ) 的优化方法被实现与最小的壳抵抗系数发现海底的壳形式(C <sub> t </sub>) 。最小的 C <sub> t </sub> 被获得。在在起始的潜水艇和最佳潜水艇之间的 C <sub> t </sub> 价值的计算差别在 0.26% 附近，与起始的潜水艇和是的最佳潜水艇的 C <sub> t </sub> 0.001 508 26 和 0.001 504 29 分别地。结果证明最佳潜水艇壳形式显示出更高的鼻子半径(r <sub> n </sub>) 和更高的 L/H 起始的潜水艇比那些塑造，当时尾巴的半径(r <sub> t </sub>) 比起始的形状的小。
基金financially supported by the National P&D Program of China(Grant No.2016YFB0300700)the National Natural Science Foundation of China(Grant Nos.51779135 and 51009087)the Natural Science Foundation of Shanghai(Grant No.14ZR1419500)
文摘In order to reduce the resistance and improve the hydrodynamic performance of a ship, two hull form design methods are proposed based on the potential flow theory and viscous flow theory. The flow fields are meshed using body-fitted mesh and structured grids. The parameters of the hull modification function are the design variables. A three-dimensional modeling method is used to alter the geometry. The Non-Linear Programming(NLP) method is utilized to optimize a David Taylor Model Basin(DTMB) model 5415 ship under the constraints, including the displacement constraint. The optimization results show an effective reduction of the resistance. The two hull form design methods developed in this study can provide technical support and theoretical basis for designing green ships.
文摘Form milling cutter is built-for-purpose cutter which process the form surface, for example, usually process male and female circular arc face and form trench and so on. From the traditional concept, form milling cutter is divided into pointed tooth and relieving follow its structure. Relieving shaped cutter is more convenient than pointed tooth milling cutter, because only its rake face is needed to grind after it turn into blunting, so the current books which are used in college almost select relieving shaped cutter in order to introduce how to design the form milling cutter.The curve of the back of tooth of relieving cutter is the transversal which is formed by the rear face of tooth in the end cut plane of the milling cutter. In the past, because of the limit of the manufacturing technology, the curve of the back of tooth is often selected Archimedes’ curve, in order that the shovel-nose tool acquire the uniform motion when the cutter shovel the back, in other word, the rear face of the milling cutter rotate its axis by the new cutting lip, in the same time, it move uniformly to the axis in order to form the surface. Although this curve of the back of tooth meet the fixedness of the form of blade around grinding the cutter, the rear angle of the dot of the cutting lip don’t keep fixedness. With the development of the modern manufacturing technology, the unmanageable problem of many complex curves is already easily solved. So it is need to study the optimum profile of the curve of the back of tooth in theory, and study the design theory of the relieving shaped cutter under the condition of new manufacture, in order to ensure that the rear angle of the dot of the cutting lip keep fixedness after the relieving shaped cutter is grinded. The paper derive the curve profile of tooth of the form cutter and the modifier calculation formula of the profile of the cutter edge from the definition of the rear angle of the cutter, which establish the foundation for the precision design and manufacture of other form cutter.
基金Supported by the National Natural Science Foundation of China(No.50805101 and No.51275347)the National Key S&T Special Projects of China on CNC Machine Tools and Fundamental Manufacturing Equipment(No.2010ZX04001-191 and No.2011ZX04002-032)the Science and Technology R&D Program of Tianjin(No.13JCZDJC35000 and No.12ZCDZGX45000)
文摘The structure stiffness of presses has great effects on the forming precision of workpieces, especially in near-net or net shape forming. Conventionally the stiffness specification of presses is empirically determined, resulting in poor designs with insufficient or over sufficient stiffness of press structures. In this paper, an approach for the structure design of hydraulic presses is proposed, which is forming-precision-driven and can make presses costeffective by lightweight optimization. The approach consists of five steps:(1)the determination of the press stiffness specification in terms of the forming precision requirement of workpieces;(2)the conceptual design of the press structures according to the stiffness and workspace specifications, and the structure configuration of the press;(3)the prototype design of the press structures by equivalently converting the conceptual design to prototypes;(4)the selection of key structure parameters by sensitivity analysis of the prototype design; and(5)the optimization of the prototype design. The approach is demonstrated and validated through a case study of the structure design of a 100 MN hydraulic press.
文摘Logistic regression models for binary response problems are present in a wide variety of industrial, biological, social and medical experiments;therefore, optimum designs are a valuable tool for experimenters, leading to estimators of parameters with minimum variance. Our interest in this contribution is to provide explicit formulae for the D-optimal designs as a function of the unknown parameters for the logistic model where q is an indicator variable. We have considered an experiment based on the dose-response to a fly insecticide in which males and females respond in different ways, proposed in Atkinson et al. (1995) [1]. To find the D-optimal designs, this problem has been reduced to a canonical form.
基金Supported by National Natural Science Foundation of China(Grant No.61471024)National Natural Science Foundation for Young Scientists of China(Grant No.51705469).
文摘The manual design of addendum surfaces on common CAD platforms is very tedious which requires many trialscorrections,which will certainly a ect the construction e ciency and quality of addendum surfaces,and then a ect the formability and quality of the workpiece in the process of sheet forming.In this paper,an automatic procedure based on parametric design method is proposed for the rapid construction of the addendum surfaces.The kernel of the parametric method is constructing boundary curves based on the shape of surfaces of workpiece and designing guide curves based on Hermite curve interpolation.By some simple parameters,the shape of the addendum surfaces could be controlled and adjusted easily.In addition,a minimum energy optimization method is employed to further optimize the constructed addendum surface.A finite element analysis for the sheet forming process is performed to evaluate the forming quality of constructed addendum surfaces.The instance illustrates that the addendum surface constructed by the proposed method could ensure both the overall smoothing of surfaces and the final forming quality,and it has a good e ect on springback after forming.This research proposes a smoothing parametric design method for addendum surfaces construction which could construct and optimize addendum surfaces rapidly.
基金supported by BEN TEN THECO.,and National Science Council,under contract 96-2622-E-152-001-CC397-2410-H-152-016
文摘A new effective tool design of three-rank form of electroremoval was present using a precision recycle system offering faster performance in removing the indium-tin-oxide(ITO) thin-films on color filter surface of displays. Higher electric power is not required since the three-rank form tool is adopted as a feeding mode to reduce the response area. The low yield of ITO persists throughout the entire semiconductor production process. By establishing a recycle process of ultra-precise removal of the thin-film nanostructure, defective products in the optoelectronic semiconductors industry can be effectively recycled, decreasing both production costs and pollution. A 5th generation TFT-LCD was used. The design features of the removal processes for the thin-films and the tool design of three-rank form were of major interest. For the precision removal processes, a pulsed current can improve the effect of dreg discharge and contributes to the achievement of a fast workpiece (displays' color filter) feed rate, but raises the current rating. High flow velocity of the electrolyte with a high rotational speed of the tool electrodes elevates the ITO removal effect. A displays' color filter with a fast feed rate is combined with enough electric power to provide highly effective removal. A small thickness of the rank and a small arc angle of the negative-electrode correspond to a higher removal rate for ITO-film. An effective three-rank form negative-electrode provides larger discharge mobility and better removal effect. It only needs a short period of time to remove the ITO easily and cleanly.
文摘The paper introduces effective and straightforward algorithms of both explicit and implicit model-following designs with state derivative measurement feedback in novel reciprocal state space form (RSS) to handle state derivative related performance output and state related performance output design cases. Applying proposed algorithms, no integrators are required. Consequently, implementation is simple and low-cost. Simulation has also been carried out to verify the proposed algorithms. Since acceleration can only be modeled as state derivative in state space form and micro-accelerometer which is the state derivative sensor is getting more and more attentions in many microelectromechanical and nanoelectromechanical systems (MEMS/NEMS) applications, the proposed algorithms are suitable for MEMS/NEMS systems installed with micro-accelerometers.
