Low-permeability dense reservoirs,including micro-fractured reservoirs,are commonly characterized by high content of clay substances,high original water saturation,high sensitivity to invasive fluids,high capillary pr...Low-permeability dense reservoirs,including micro-fractured reservoirs,are commonly characterized by high content of clay substances,high original water saturation,high sensitivity to invasive fluids,high capillary pressure,complicated structure and anisotropic,high flow-resistance and micro pore throats etc,.Generally they also have lots of natural micro fractures,probably leading to stress sensibility.Main damaging factors in such reservoirs are water-sensibility and water-blocking caused by invasive fluids during drilling and production operations.Once damaged,formation permeability can rarely recovered.Numerous studies have shown that damaging extent of water-blocking ranges from 70% to 90%.Main damaging mechanisms and influencing factors of water-blocking were systematically analyzed.Also some feasible precaution or treating approaches of water-blocking were put forward.In a laboratory setting,a new multi-functional drilling fluid composed mainly of amphion polymer,sulfonation polymer,high effectively preventive water-blocking surfactants,ideal packing temporary bridging agents(TBA) and film-forming agents,etc.,were developed.New low-damage drilling fluids has many advantages,such as good rheological properties,excellent effectiveness of water-blocking prevention,good temporary plugging effect,low filtration and ultra-low permeability(API filtration≤5 mL,HTHP filtration≤10 mL,mud cake frictional coefficient≤0.14,permeability recovery>81%),can efficiently prevent or minimize damage,preserve natural formation and enhance comprehensive development-investment effect in TUHA Jurassic dense sandstone reservoir formation with low-permeability,the only one developing integrated condense gas field.Some references can be provided to similar reservoir formations.展开更多
A submanifold in a complex space form is called slant if it has constant Wirtinger angles. B. Y. Chen and Y. Tazawa proved that there do not exist minimal proper slant surfaces in CP2 and CH2. So it seems that the sla...A submanifold in a complex space form is called slant if it has constant Wirtinger angles. B. Y. Chen and Y. Tazawa proved that there do not exist minimal proper slant surfaces in CP2 and CH2. So it seems that the slant immersion has some interesting properties. The authors have great interest to consider slant immersions satisfying some additional conditions, such as unfull first normal bundles or Chen’s equality holding. They prove that there do not exist n-dimensional Kaehlerian slant immersions in CPn and CHn with unfull first normal bundles. Next, it is seen that every Kaehlerian slant submanifold satisfying an equality of Chen is minimal which is similar to that of Lagrangian immersions. But in contrast, it is shown that a large class of slant immersions do not exist thoroughly. Finally, they give an application of Chen’s inequality to general slant immersions in a complex projective space, which generalizes a result of Chen.展开更多
The comparison of Plato's description of the dialectic in his Republic with Marx's analysis of the value form in The Capital reveals certain common features striking to the reader.How is this possible?The pape...The comparison of Plato's description of the dialectic in his Republic with Marx's analysis of the value form in The Capital reveals certain common features striking to the reader.How is this possible?The paper discusses the grounds of possibility of such a comparison focusing on two levels:firstly,a ground of historical comparability and,secondly,a ground of systematic comparability.Based on these two grounds,the argument highlights two of the common features that can be found in both thinkers,namely the dialectic as a process of complete separation of the intellect from sense perception and as a process that supersedes the form of hypothesis of scientific thinking.展开更多
Millipede Forming is a novel metal forming method that has been proposed and developed recently.It can be applied to overcome fundamental limitations in conventional roll forming,and,in addition,used for incremental f...Millipede Forming is a novel metal forming method that has been proposed and developed recently.It can be applied to overcome fundamental limitations in conventional roll forming,and,in addition,used for incremental forging and integrated into a strip casting or extrusion process for downstream thickness reduction. In this new method,there are two main principles:①the use of an optimal transitional surface or space linking of the incoming material to the outgoing product,and②implementation of a method to feed the material through the forming device so that it conforms with this ideal space and the required deformation is imposed on it by the tooling. The system described here is called "Millipede forming" because deformation is accomplished in a large number of small steps.A prototype has been built to demonstrate the working principle applied to the replacement of a roll forming process;it can be used to produce simple profiles within a forming length an order of magnitude shorter than the conventional process. In this paper,the working principle of "Millipede forming" is introduced and some fundamental research on forming a channel section and a circular tube is discussed.Following the success of the small scale prototype, research on a full scale pilot machine has been proceeding.It is expected that this process can be developed and extended as a useful alternative to conventional roll forming,incremental forging and within a strip casting or other novel strip material(e.g.nanostructured metals) system.展开更多
基金Project(50574061) supported by the National Natural Science Foundation of China
文摘Low-permeability dense reservoirs,including micro-fractured reservoirs,are commonly characterized by high content of clay substances,high original water saturation,high sensitivity to invasive fluids,high capillary pressure,complicated structure and anisotropic,high flow-resistance and micro pore throats etc,.Generally they also have lots of natural micro fractures,probably leading to stress sensibility.Main damaging factors in such reservoirs are water-sensibility and water-blocking caused by invasive fluids during drilling and production operations.Once damaged,formation permeability can rarely recovered.Numerous studies have shown that damaging extent of water-blocking ranges from 70% to 90%.Main damaging mechanisms and influencing factors of water-blocking were systematically analyzed.Also some feasible precaution or treating approaches of water-blocking were put forward.In a laboratory setting,a new multi-functional drilling fluid composed mainly of amphion polymer,sulfonation polymer,high effectively preventive water-blocking surfactants,ideal packing temporary bridging agents(TBA) and film-forming agents,etc.,were developed.New low-damage drilling fluids has many advantages,such as good rheological properties,excellent effectiveness of water-blocking prevention,good temporary plugging effect,low filtration and ultra-low permeability(API filtration≤5 mL,HTHP filtration≤10 mL,mud cake frictional coefficient≤0.14,permeability recovery>81%),can efficiently prevent or minimize damage,preserve natural formation and enhance comprehensive development-investment effect in TUHA Jurassic dense sandstone reservoir formation with low-permeability,the only one developing integrated condense gas field.Some references can be provided to similar reservoir formations.
基金This project is supported by the NSFC(10271041)Tianyuan Youth Foundation of Mathematics.
文摘A submanifold in a complex space form is called slant if it has constant Wirtinger angles. B. Y. Chen and Y. Tazawa proved that there do not exist minimal proper slant surfaces in CP2 and CH2. So it seems that the slant immersion has some interesting properties. The authors have great interest to consider slant immersions satisfying some additional conditions, such as unfull first normal bundles or Chen’s equality holding. They prove that there do not exist n-dimensional Kaehlerian slant immersions in CPn and CHn with unfull first normal bundles. Next, it is seen that every Kaehlerian slant submanifold satisfying an equality of Chen is minimal which is similar to that of Lagrangian immersions. But in contrast, it is shown that a large class of slant immersions do not exist thoroughly. Finally, they give an application of Chen’s inequality to general slant immersions in a complex projective space, which generalizes a result of Chen.
文摘The comparison of Plato's description of the dialectic in his Republic with Marx's analysis of the value form in The Capital reveals certain common features striking to the reader.How is this possible?The paper discusses the grounds of possibility of such a comparison focusing on two levels:firstly,a ground of historical comparability and,secondly,a ground of systematic comparability.Based on these two grounds,the argument highlights two of the common features that can be found in both thinkers,namely the dialectic as a process of complete separation of the intellect from sense perception and as a process that supersedes the form of hypothesis of scientific thinking.
文摘Millipede Forming is a novel metal forming method that has been proposed and developed recently.It can be applied to overcome fundamental limitations in conventional roll forming,and,in addition,used for incremental forging and integrated into a strip casting or extrusion process for downstream thickness reduction. In this new method,there are two main principles:①the use of an optimal transitional surface or space linking of the incoming material to the outgoing product,and②implementation of a method to feed the material through the forming device so that it conforms with this ideal space and the required deformation is imposed on it by the tooling. The system described here is called "Millipede forming" because deformation is accomplished in a large number of small steps.A prototype has been built to demonstrate the working principle applied to the replacement of a roll forming process;it can be used to produce simple profiles within a forming length an order of magnitude shorter than the conventional process. In this paper,the working principle of "Millipede forming" is introduced and some fundamental research on forming a channel section and a circular tube is discussed.Following the success of the small scale prototype, research on a full scale pilot machine has been proceeding.It is expected that this process can be developed and extended as a useful alternative to conventional roll forming,incremental forging and within a strip casting or other novel strip material(e.g.nanostructured metals) system.
