Melamine formaldehyde foam(MFF)generates many poisonous chemicals through the traditional recycling methods for organic resin wastes.Herein,a high MFF degradation ratio of ca.97 wt.%was achieved under the mild conditi...Melamine formaldehyde foam(MFF)generates many poisonous chemicals through the traditional recycling methods for organic resin wastes.Herein,a high MFF degradation ratio of ca.97 wt.%was achieved under the mild conditions(160℃)in a NaOH–H2O system with ammelide and ammeline as the main degradation products.The alkaline solvent had an obvious corrosion effect for MFF,as indicated by scanning electron microscopy(SEM).The reaction process and products distribution were studied by Fourier-transform infrared spectroscopy(FTIR),X-ray photoelectron spectroscopy(XPS),and ^(13)C nuclear magnetic resonance(NMR).Besides,the MFF degradation products that have the similar chemical structures and bonding performances to those of melamine can be directly used as the raw material for synthesis of melamine urea-formaldehyde resins(MUFs).Moreover,the degradation system demonstrated here showed the high degradation efficiency after reusing for 7 times.The degradation process generated few harmful pollutants and no pre-or post-treatments were required,which proves its feasibility in the safe removal or recovery of waste MFF.展开更多
Due to its ability to cause illnesses and discomfort even at low concentrations, formaldehyde pollution of indoor air poses a significant risk to human health. Sources of formaldehyde in indoor environments include te...Due to its ability to cause illnesses and discomfort even at low concentrations, formaldehyde pollution of indoor air poses a significant risk to human health. Sources of formaldehyde in indoor environments include textiles, paints, wallpapers, glues, adhesives, varnishes, and lacquers;furniture and wooden products like particleboard, plywood, and medium-density fiberboard that contain formaldehyde-based resins;shoe products;cosmetics;electronic devices;and other consumer goods like paper products and insecticides. According to the World Health Organisation, indoor formaldehyde concentrations shouldn’t exceed 0.1 mg/m<sup>3</sup>. The methods include membrane separation, plasma, photocatalytic decomposition, physisorption, chemisorption, biological and botanical filtration, and catalytic oxidation. Materials based on metal oxides and supported noble metals work as oxidation catalysts. Consequently, a paint that passively eliminates aldehydes from buildings can be developed by adding absorbents and formaldehyde scavengers to the latex composition. It will be crucial to develop techniques for the careful detection and removal of formaldehyde in the future. Additionally, microbial decomposition is less expensive and produces fewer pollutants. The main goal of future research will be to develop a biological air quality control system that will boost the effectiveness of formaldehyde elimination. The various methods of removing formaldehyde through paints have been reviewed here, including the use of mixed metal oxides, formaldehyde-absorbing emulsions, nano titanium dioxide, catalytic oxidation, and aromatic formaldehyde abating materials that can improve indoor air quality.展开更多
Environmental monitoring of airborne formaldehyde (FA) using sensitive methodologies is fundamental to prevent health risks. The objective of this study was to compare three different FA monitoring methods during the ...Environmental monitoring of airborne formaldehyde (FA) using sensitive methodologies is fundamental to prevent health risks. The objective of this study was to compare three different FA monitoring methods during the daily activities of an anatomic pathology laboratory. Daily eight-hour measurements deriving from Radiello® passive diffusive samplers (PDS), NEMo XT continuous optical sensor (COS), and multi-gas 1512 photoacoustic monitor (MPM) were simultaneously compared over a period of 14 working days. Given the different daily distributions of the measurements performed by the three devices, all measurements were time-aligned for comparison purposes. The 95% limit of agreement (LOA) method was applied to estimate the degree of concordance of each device with respect to the others. Formaldehyde arithmetic mean measured using PDS was 32.6 ± 10.4 ppb (range: 19.8 - 62.7). The simultaneous measures performed by COS and MPM were respectively 42.4 ± 44.8 ppb (range: 7.0 - 175.0) and 189.0 ± 163.7 ppb (range: 40.0 - 2895.4). The MPM geometric mean (171.3 ppb) was approximately five times higher than those derived from COS (32.3 ppb) and PDS (31.4 ppb). The results of the LOA method applied to log-transformed FA data showed the same systematic discrepancies between MPM and the other two devices. A good agreement between PDS and COS could lead to a tailored approach according to the individual specificity of these techniques. This tool may be useful for accurately assessing the risk of FA exposure among healthcare workers. However, the limited specificity of the MPM does not support its use as a monitoring method for FA in the workplace.展开更多
In the preparation of a series of Ce_(0.8)Zr_(0.2)O_(y)catalysts catalyzing the removal of formaldehyde,BET,H2-TPR,IR,SEM,XPS,and XRD were used to characterize the catalyst,and the influence of humidity on the catalys...In the preparation of a series of Ce_(0.8)Zr_(0.2)O_(y)catalysts catalyzing the removal of formaldehyde,BET,H2-TPR,IR,SEM,XPS,and XRD were used to characterize the catalyst,and the influence of humidity on the catalyst activity was studied by adjusting the humidity during the process.The experimental results showed that the formaldehyde removal rate increased with the increase of humidity.When the humidity was higher than 50%,the formaldehyde removal rate decreased by 3%over that when the humidity was 50%.The characterization results showed that humidity facilitated the activation of oxygen and the formation of hydroxyl groups,which both promoted the formation and oxidative decomposition of intermediates and prevented the deposition of intermediates that clogged the pores,allowing more formaldehyde to be adsorbed and oxidized,which increased the activity of the catalyst.This provides new mechanistic evidence for the oxidation of formaldehyde and helps in the development of relatively low-cost materials for formaldehyde purification.展开更多
This research focuses on the evaluation of diverse approaches for removing formaldehyde from indoor environments,which is a significant concern for indoor air quality.The study systematically examines physical,chemica...This research focuses on the evaluation of diverse approaches for removing formaldehyde from indoor environments,which is a significant concern for indoor air quality.The study systematically examines physical,chemical,and biological methods to ascertain their effectiveness in formaldehyde mitigation.Physical methods,including air circulation and adsorption,particularly with activated carbon and molecular sieves,are assessed for their efficiency in various concentration scenarios.Chemical methods,such as photocatalytic oxidation using titanium dioxide and plasma technology,are analyzed for their ability to decompose formaldehyde into non-toxic substances.Additionally,biological methods involving plant purification and microbial transformation are explored for their eco-friendly and sustainable removal capabilities.The paper concludes that while each method has its merits,a combined approach may offer the most effective solution for reducing indoor formaldehyde levels.The study underscores the need for further research to integrate these methods in a practical,cost-effective,and environmentally sustainable manner,highlighting their potential to improve indoor air quality significantly.展开更多
Objective: The aim of this study was to compare the olfactory function between hairdressers exposed to formaldehyde and unexposed controls, as exposure to toxic agents is a potential cause of olfactory disorders in hu...Objective: The aim of this study was to compare the olfactory function between hairdressers exposed to formaldehyde and unexposed controls, as exposure to toxic agents is a potential cause of olfactory disorders in humans. Hairdressing professionals frequently encounter formaldehyde, a component found in hair products that are known to have various toxic effects on the human body, including alterations in the sense of smell. Methods: A total of 32 hairdressing volunteers exposed to formaldehyde and 32 non-exposed volunteers matched for age, sex, education and smoking status underwent the University of Pennsylvania Smell Identification Test (UPSIT<sup>®</sup>). Results: The findings demonstrated a decrease in UPSIT<sup>®</sup> olfactory test scores and a higher degree of olfactory loss among hairdressers exposed to formaldehyde (mean UPSIT<sup>®</sup> scores: 30.6 vs 35.1, p Conclusion: Occupational exposure of hairdressers to formaldehyde is associated with diminished olfactory function. Education approach and promotion of personal protective equipment usage should be encouraged.展开更多
Objective: The aim of this study was to compare the olfactory function between hairdressers exposed to formaldehyde and unexposed controls, as exposure to toxic agents is a potential cause of olfactory disorders in hu...Objective: The aim of this study was to compare the olfactory function between hairdressers exposed to formaldehyde and unexposed controls, as exposure to toxic agents is a potential cause of olfactory disorders in humans. Hairdressing professionals frequently encounter formaldehyde, a component found in hair products that are known to have various toxic effects on the human body, including alterations in the sense of smell. Methods: A total of 32 hairdressing volunteers exposed to formaldehyde and 32 non-exposed volunteers matched for age, sex, education and smoking status underwent the University of Pennsylvania Smell Identification Test (UPSIT<sup>®</sup>). Results: The findings demonstrated a decrease in UPSIT<sup>®</sup> olfactory test scores and a higher degree of olfactory loss among hairdressers exposed to formaldehyde (mean UPSIT<sup>®</sup> scores: 30.6 vs 35.1, p Conclusion: Occupational exposure of hairdressers to formaldehyde is associated with diminished olfactory function. Education approach and promotion of personal protective equipment usage should be encouraged.展开更多
Oxygen vacancy （Ov） has significant influence on physical and chemical properties of TiO2 systems, especially on surface catalytic processes. In this work, we investigate the effects of Ov on the adsorption of forma...Oxygen vacancy （Ov） has significant influence on physical and chemical properties of TiO2 systems, especially on surface catalytic processes. In this work, we investigate the effects of Ov on the adsorption of formaldehyde （HCHO） on TiO2（110） surfaces through first- principles calculations. With the existence of Ov, we find the spatial distribution of surface excess charge can change the relative stability of various adsorption configurations. In this case, the bidentate adsorption at five-coordinated Ti （Tisc） can be less stable than the monodentate adsorption. And HCHO adsorbed in Ov becomes the most stable structure. These results are in good agreement with experimental observations, which reconcile the long-standing deviation between the theoretical prediction and experimental results. This work brings insights into how the excess charge affects the molecule adsorption on metal oxide surface.展开更多
Formaldehyde(HCHO)has been identified as one of the most common indoor pollutions nowadays.Manganese oxides(MnO_(x))are considered to be a promising catalytic material used in indoor HCHO oxidation removal due to thei...Formaldehyde(HCHO)has been identified as one of the most common indoor pollutions nowadays.Manganese oxides(MnO_(x))are considered to be a promising catalytic material used in indoor HCHO oxidation removal due to their high catalytic activity,low-cost,and environmentally friendly.In this paper,the progress in developing MnO_(x)-based catalysts for HCHO removal is comprehensively reviewed for exploring the mechanisms of catalytic oxidation and catalytic deactivation.The catalytic oxidation mechanisms based on three typical theory models(Mars-van-Krevelen,Eley-Rideal and Langmuir-Hinshelwood)are discussed and summarized.Furthermore,the research status of catalytic deactivation,catalysts’regeneration and integrated application of MnO_(x)-based catalysts for indoor HCHO removal are detailed in the review.Finally,the technical challenges in developing MnO_(x)-based catalysts for indoor HCHO removal are analyzed and the possible research direction is also proposed for overcoming the challenges toward practical application of such catalysts.展开更多
As the photo-dissociation product of methanol on the TIO2（110） surface, the diffusion and desorption processes of formaldehyde （HCHO） were investigated by using scanning tunneling microscope （STM） and density fu...As the photo-dissociation product of methanol on the TIO2（110） surface, the diffusion and desorption processes of formaldehyde （HCHO） were investigated by using scanning tunneling microscope （STM） and density functional theory （DFT）. The molecular-level images revealed the HCHO molecules could diffuse and desorb on the surface at 80 K under UV laser irra- diation. The diffusion was found to be mediated by hydrogen adatoms nearby, which were produced from photodissociation of methanol. Diffusion of HCHO was significantly decreased when there was only one H alatom near the HCHO molecule. Furthermore, single HCHO molecule adsorbed on the bare Ti02（l10） surface was quite stable, little photo-desorption was observed during laser irradiation. The mechanism of hydroxyl groups assisted diffusion of formaldehyde was also investigated using theoretical calculations.展开更多
基金supported by the National Natural Science Foundation of China(No.21774139)China,Key Research and Development Program of Shanxi Province,China(No,202102040201009)special fund of Beijing Key Laboratory of Clean Fuels and Efficient Catalytic Emission Reduction Technology and the Fund for Shanxi“1331 Project”.Thanks to Ningbo Kejiang Culture Sci.&Tech.Development Co.,Ltd.for the help in schematic drawing。
文摘Melamine formaldehyde foam(MFF)generates many poisonous chemicals through the traditional recycling methods for organic resin wastes.Herein,a high MFF degradation ratio of ca.97 wt.%was achieved under the mild conditions(160℃)in a NaOH–H2O system with ammelide and ammeline as the main degradation products.The alkaline solvent had an obvious corrosion effect for MFF,as indicated by scanning electron microscopy(SEM).The reaction process and products distribution were studied by Fourier-transform infrared spectroscopy(FTIR),X-ray photoelectron spectroscopy(XPS),and ^(13)C nuclear magnetic resonance(NMR).Besides,the MFF degradation products that have the similar chemical structures and bonding performances to those of melamine can be directly used as the raw material for synthesis of melamine urea-formaldehyde resins(MUFs).Moreover,the degradation system demonstrated here showed the high degradation efficiency after reusing for 7 times.The degradation process generated few harmful pollutants and no pre-or post-treatments were required,which proves its feasibility in the safe removal or recovery of waste MFF.
文摘Due to its ability to cause illnesses and discomfort even at low concentrations, formaldehyde pollution of indoor air poses a significant risk to human health. Sources of formaldehyde in indoor environments include textiles, paints, wallpapers, glues, adhesives, varnishes, and lacquers;furniture and wooden products like particleboard, plywood, and medium-density fiberboard that contain formaldehyde-based resins;shoe products;cosmetics;electronic devices;and other consumer goods like paper products and insecticides. According to the World Health Organisation, indoor formaldehyde concentrations shouldn’t exceed 0.1 mg/m<sup>3</sup>. The methods include membrane separation, plasma, photocatalytic decomposition, physisorption, chemisorption, biological and botanical filtration, and catalytic oxidation. Materials based on metal oxides and supported noble metals work as oxidation catalysts. Consequently, a paint that passively eliminates aldehydes from buildings can be developed by adding absorbents and formaldehyde scavengers to the latex composition. It will be crucial to develop techniques for the careful detection and removal of formaldehyde in the future. Additionally, microbial decomposition is less expensive and produces fewer pollutants. The main goal of future research will be to develop a biological air quality control system that will boost the effectiveness of formaldehyde elimination. The various methods of removing formaldehyde through paints have been reviewed here, including the use of mixed metal oxides, formaldehyde-absorbing emulsions, nano titanium dioxide, catalytic oxidation, and aromatic formaldehyde abating materials that can improve indoor air quality.
文摘Environmental monitoring of airborne formaldehyde (FA) using sensitive methodologies is fundamental to prevent health risks. The objective of this study was to compare three different FA monitoring methods during the daily activities of an anatomic pathology laboratory. Daily eight-hour measurements deriving from Radiello® passive diffusive samplers (PDS), NEMo XT continuous optical sensor (COS), and multi-gas 1512 photoacoustic monitor (MPM) were simultaneously compared over a period of 14 working days. Given the different daily distributions of the measurements performed by the three devices, all measurements were time-aligned for comparison purposes. The 95% limit of agreement (LOA) method was applied to estimate the degree of concordance of each device with respect to the others. Formaldehyde arithmetic mean measured using PDS was 32.6 ± 10.4 ppb (range: 19.8 - 62.7). The simultaneous measures performed by COS and MPM were respectively 42.4 ± 44.8 ppb (range: 7.0 - 175.0) and 189.0 ± 163.7 ppb (range: 40.0 - 2895.4). The MPM geometric mean (171.3 ppb) was approximately five times higher than those derived from COS (32.3 ppb) and PDS (31.4 ppb). The results of the LOA method applied to log-transformed FA data showed the same systematic discrepancies between MPM and the other two devices. A good agreement between PDS and COS could lead to a tailored approach according to the individual specificity of these techniques. This tool may be useful for accurately assessing the risk of FA exposure among healthcare workers. However, the limited specificity of the MPM does not support its use as a monitoring method for FA in the workplace.
基金Funded by the Young and Middle-aged Academic and Technical Leaders Reserve Talent Project of Yunnan Province(No.202105AC160054)。
文摘In the preparation of a series of Ce_(0.8)Zr_(0.2)O_(y)catalysts catalyzing the removal of formaldehyde,BET,H2-TPR,IR,SEM,XPS,and XRD were used to characterize the catalyst,and the influence of humidity on the catalyst activity was studied by adjusting the humidity during the process.The experimental results showed that the formaldehyde removal rate increased with the increase of humidity.When the humidity was higher than 50%,the formaldehyde removal rate decreased by 3%over that when the humidity was 50%.The characterization results showed that humidity facilitated the activation of oxygen and the formation of hydroxyl groups,which both promoted the formation and oxidative decomposition of intermediates and prevented the deposition of intermediates that clogged the pores,allowing more formaldehyde to be adsorbed and oxidized,which increased the activity of the catalyst.This provides new mechanistic evidence for the oxidation of formaldehyde and helps in the development of relatively low-cost materials for formaldehyde purification.
文摘This research focuses on the evaluation of diverse approaches for removing formaldehyde from indoor environments,which is a significant concern for indoor air quality.The study systematically examines physical,chemical,and biological methods to ascertain their effectiveness in formaldehyde mitigation.Physical methods,including air circulation and adsorption,particularly with activated carbon and molecular sieves,are assessed for their efficiency in various concentration scenarios.Chemical methods,such as photocatalytic oxidation using titanium dioxide and plasma technology,are analyzed for their ability to decompose formaldehyde into non-toxic substances.Additionally,biological methods involving plant purification and microbial transformation are explored for their eco-friendly and sustainable removal capabilities.The paper concludes that while each method has its merits,a combined approach may offer the most effective solution for reducing indoor formaldehyde levels.The study underscores the need for further research to integrate these methods in a practical,cost-effective,and environmentally sustainable manner,highlighting their potential to improve indoor air quality significantly.
文摘Objective: The aim of this study was to compare the olfactory function between hairdressers exposed to formaldehyde and unexposed controls, as exposure to toxic agents is a potential cause of olfactory disorders in humans. Hairdressing professionals frequently encounter formaldehyde, a component found in hair products that are known to have various toxic effects on the human body, including alterations in the sense of smell. Methods: A total of 32 hairdressing volunteers exposed to formaldehyde and 32 non-exposed volunteers matched for age, sex, education and smoking status underwent the University of Pennsylvania Smell Identification Test (UPSIT<sup>®</sup>). Results: The findings demonstrated a decrease in UPSIT<sup>®</sup> olfactory test scores and a higher degree of olfactory loss among hairdressers exposed to formaldehyde (mean UPSIT<sup>®</sup> scores: 30.6 vs 35.1, p Conclusion: Occupational exposure of hairdressers to formaldehyde is associated with diminished olfactory function. Education approach and promotion of personal protective equipment usage should be encouraged.
文摘Objective: The aim of this study was to compare the olfactory function between hairdressers exposed to formaldehyde and unexposed controls, as exposure to toxic agents is a potential cause of olfactory disorders in humans. Hairdressing professionals frequently encounter formaldehyde, a component found in hair products that are known to have various toxic effects on the human body, including alterations in the sense of smell. Methods: A total of 32 hairdressing volunteers exposed to formaldehyde and 32 non-exposed volunteers matched for age, sex, education and smoking status underwent the University of Pennsylvania Smell Identification Test (UPSIT<sup>®</sup>). Results: The findings demonstrated a decrease in UPSIT<sup>®</sup> olfactory test scores and a higher degree of olfactory loss among hairdressers exposed to formaldehyde (mean UPSIT<sup>®</sup> scores: 30.6 vs 35.1, p Conclusion: Occupational exposure of hairdressers to formaldehyde is associated with diminished olfactory function. Education approach and promotion of personal protective equipment usage should be encouraged.
文摘Oxygen vacancy （Ov） has significant influence on physical and chemical properties of TiO2 systems, especially on surface catalytic processes. In this work, we investigate the effects of Ov on the adsorption of formaldehyde （HCHO） on TiO2（110） surfaces through first- principles calculations. With the existence of Ov, we find the spatial distribution of surface excess charge can change the relative stability of various adsorption configurations. In this case, the bidentate adsorption at five-coordinated Ti （Tisc） can be less stable than the monodentate adsorption. And HCHO adsorbed in Ov becomes the most stable structure. These results are in good agreement with experimental observations, which reconcile the long-standing deviation between the theoretical prediction and experimental results. This work brings insights into how the excess charge affects the molecule adsorption on metal oxide surface.
基金the National Natural Science Foundation of China (NSFC,52070006)BeijingNova Program of Science and Technology (Z191100001119116).
文摘Formaldehyde(HCHO)has been identified as one of the most common indoor pollutions nowadays.Manganese oxides(MnO_(x))are considered to be a promising catalytic material used in indoor HCHO oxidation removal due to their high catalytic activity,low-cost,and environmentally friendly.In this paper,the progress in developing MnO_(x)-based catalysts for HCHO removal is comprehensively reviewed for exploring the mechanisms of catalytic oxidation and catalytic deactivation.The catalytic oxidation mechanisms based on three typical theory models(Mars-van-Krevelen,Eley-Rideal and Langmuir-Hinshelwood)are discussed and summarized.Furthermore,the research status of catalytic deactivation,catalysts’regeneration and integrated application of MnO_(x)-based catalysts for indoor HCHO removal are detailed in the review.Finally,the technical challenges in developing MnO_(x)-based catalysts for indoor HCHO removal are analyzed and the possible research direction is also proposed for overcoming the challenges toward practical application of such catalysts.
文摘As the photo-dissociation product of methanol on the TIO2（110） surface, the diffusion and desorption processes of formaldehyde （HCHO） were investigated by using scanning tunneling microscope （STM） and density functional theory （DFT）. The molecular-level images revealed the HCHO molecules could diffuse and desorb on the surface at 80 K under UV laser irra- diation. The diffusion was found to be mediated by hydrogen adatoms nearby, which were produced from photodissociation of methanol. Diffusion of HCHO was significantly decreased when there was only one H alatom near the HCHO molecule. Furthermore, single HCHO molecule adsorbed on the bare Ti02（l10） surface was quite stable, little photo-desorption was observed during laser irradiation. The mechanism of hydroxyl groups assisted diffusion of formaldehyde was also investigated using theoretical calculations.
