Comprehensive Analysis of Indoor Formaldehyde Removal Techniques:Exploring Physical,Chemical,and Biological Methods

This research focuses on the evaluation of diverse approaches for removing formaldehyde from indoor environments,which is a significant concern for indoor air quality.The study systematically examines physical,chemical,and biological methods to ascertain their effectiveness in formaldehyde mitigation.Physical methods,including air circulation and adsorption,particularly with activated carbon and molecular sieves,are assessed for their efficiency in various concentration scenarios.Chemical methods,such as photocatalytic oxidation using titanium dioxide and plasma technology,are analyzed for their ability to decompose formaldehyde into non-toxic substances.Additionally,biological methods involving plant purification and microbial transformation are explored for their eco-friendly and sustainable removal capabilities.The paper concludes that while each method has its merits,a combined approach may offer the most effective solution for reducing indoor formaldehyde levels.The study underscores the need for further research to integrate these methods in a practical,cost-effective,and environmentally sustainable manner,highlighting their potential to improve indoor air quality significantly.

Hierarchical Ni-Al hydrotalcite supported Pt catalyst for efficient catalytic oxidation of formaldehyde at room temperature

Catalytic oxidation at room temperature is recognized as the most promising method for formaldehyde(HCHO)removal.Pt‐based catalysts are the optimal catalyst for HCHO decomposition at room temperature.Herein,flower‐like hierarchical Pt/NiAl‐LDHs catalysts with different[Ni2+]/[Al3+]molar ratios were synthesized via hydrothermal method followed by NaBH4 reduction of Pt precursor at room temperature.The flower‐like hierarchical Pt/NiAl‐LDHs were composed of interlaced nanoplates and metallic Pt nanoparticles(NPs)approximately 3–4 nm in diameter were loaded on the surface of the Pt/NiAl‐LDHs with high dispersion.The as‐prepared Pt/NiAl21 nanocomposite was highly efficient in catalyzing oxidation of HCHO into CO2 at room temperature.The high activity of the hierarchical Pt/NiAl21 nanocomposite was maintained after seven recycle tests,suggesting the high stability of the catalyst.Based on in situ diffuse reflectance infrared Fourier transform spectroscopy(DRIFTS)studies,a reaction mechanism was put forward about HCHO decomposition at room temperature.This work provides new insights into designing and fabricating high‐performance catalysts for efficient indoor air purification.

A novel process of ozone catalytic oxidation for low concentration formaldehyde removal

To reduce energy costs,minimize secondary pollution from undecomposed ozone,and improve the efficiency of ozone use,a novel process of cycled storage‐ozone catalytic oxidation(OZCO)was employed to remove formaldehyde(HCHO)at low concentrations in air.We applied Al2O3‐supported manganese oxide(MnOx)catalysts to this process,and examined the HCHO adsorption capacity and OZCO performance over the MnOx catalysts.Owing to the high dispersion of MnOx and low oxidation state of manganese,the MnOx/Al2O3catalysts with a manganese acetate precursor and10%‐Mn loading showed good performance in both storage and OZCO stages.The presence of H2O led to a decrease of the HCHO adsorption capacity owing to competitive adsorption between moisture and HCHO at the storage stage;however,high relative humidity(RH)favored complete conversion of stored HCHO to CO2at the OZCO stage and contributed to an excellent carbonbalance.Four low concentration HCHO storage‐OZCO cycles with a long HCHO storage period and relatively short OZCO period were successfully performed over the selected MnOx/Al2O3catalyst at room temperature and a RH of50%,demonstrating that the proposed storage‐OZCO process is an economical,reliable,and promising technique for indoor air purification.

Research on the Performance of Cedarwood Essential Oil in Removing Formaldehyde

This paper tested cedar essential oil as a new formaldehyde removal ingredient on gel format,it showed a better formaldehyde removal performance,reaching equilibrium at 7 h with a formaldehyde removal rate of 64%,and at 24 h with a formaldehyde removal rate of 67%.The 24 h formaldehyde removal rate increased by 25%compared with the gel without cedar essential oil,and efficiency is improved by 60%.The ingredients come from natural sources with a woody aroma,which can soothe the body and mind.After the stability test,the formaldehyde removal gel has no odor,precipitation or discoloration.

Cubic S/N co-doped TiO_(2) with rich oxygen vacancies from Ti-MOFs for efficient elimination of formaldehyde

The cubic S/N co-doped TiO_(2)(TNSx,x is the calcination temperature)photocatalysts with rich oxygen vacancies were obtained by high temperature calcination of sulfur powder and titanium-based MOFs NH_(2)-MIL-125 for the photocatalytic removal of gaseous formaldehyde(a volatile organic compound).Among the obtained catalysts,the presence of oxygen vacancies restricted photogenerated electron and holes recombination.98.00%removal of gaseous formaldehyde in 150 min could be achieved over TNS600 by xenon lamp.The removal efficiency for formaldehyde was well retained for five cycle experiment.The results from PL,TRPL and EIS revealed that TNS600 had the best separation efficiency of photogenerated electrons and holes,and the enhanced charge separation led to a significant increase in photocatalytic activity.The photocatalytic oxidation mechanism indicated that the ^(•)OH and ^(•)O_(2)−radicals were mainly involved in the efficient elimination of gaseous formaldehyde and were able to mineralize formaldehyde to H_(2)O and CO_(2).

Functionalized Graphene Oxide with Bismuth and Titanium Oxide Nanoparticles for Efficiently Removing Formaldehyde from the Air by Photocatalytic Degradation-Adsorption Process

Formaldehyde(HCHO)is formed through the oxidation of volatile organic compounds(VOCs)and can cause human cancer.Bismuth oxide and titanium oxide nanoparticles-functionalized nanographene oxide(Bi_(2)O_(3)/TiO_(2)@NGO)were used to rapidly remove the HCHO from the air by a photocatalytic degradation-adsorption process(PC-DAP).The formaldehyde vapor in pure air was generated in a dynamic system within a chamber,and flowed over Bi_(2)O_(3)/TiO_(2)@NGO adsorbent inside a fixed-bed quartz reactor(FBQR)under UV irradiation at optimized conditions(250C).At atmospheric pressure,the flow rate and gas hourly space velocity(GHSV)were adjusted to 300 mL/min and 100-450 L/h,respectively.The radicals of HCHO and nanographene oxide(NGO)were generated through the UV-photochemical process,enhancing the chemical adsorption through the radicals’interactions.On the other hand,the semi-degradation process by catalytic oxidation process converted some HCHO into raw materials of CO_(2)and H_(2)O,while the unconverted HCHO was physically absorbed by NGO.Finally,the HCHO concentration in the outlet system was measured by gas chromatography with a flame ionization detector(GC-FID)after derivatizing formaldehyde with 2,4-dinitrophenylhydrazine(DNPH)and acetonitrile.Therefore,efficient removal of HCHO from the air,the removal efficiency of more than 95%,was achieved through physical/chemical adsorption and the semi-degradation.The mean removal efficiencies for HCHO with Bi_(2)O_(3)-TiO_(2)@NGO,TiO_(2)@NGO,Bi_(2)O_(3)@NGO,and NGO were 98.7%,73.6%,61.8%,and 11.4%,respectively(n=10,RSD<5%).The methodology was validated by spiking different concentrations of standard HCHO into pure air.

A breathing A4 paper by in situ growth of green metal-organic frameworks for air freshening and cleaning

Surface modification of natural cellulose fibers with nanomaterials is an effective strategy for producing functional textiles for multiple applications.A4-sized printing paper is a commonly used,cheap,and easily acquirable office supply which is mainly made of cellulose fibers.Here,we report green and simple nanofabrication of A4 paper to endow it with high capability for fragrance encapsulation and sustained release,and strong adsorption to indoor air pollutants.The method utilizes the sugar molecule of cellulose for in-situ growth ofγ-cyclodextrin(γ-CD)metal-organic frameworks(MOFs)on A4 paper.The obtainedγ-CD-MOF/A4 nanocomposites have superior specific surface area and high porous structure.Theγ-CD-MOF/A4 nanocomposites can effectively encapsulate fragrant molecules through host-guest interaction.Theγ-CD-MOF/A4 nanocomposites also show strong absorption capability to formaldehyde and carbon dioxide through the formation of hydrogen bonding and chemical bonds.Theseγ-CD-MOF/A4nanocomposites combine the advantages of both A4 paper andγ-CD-MOF,which can be used in indoor air freshening and cleaning.

Peroxymonosulfate activation based on Co_(9)S_(8)@N-C:A new strategy for highly efficient hydrogen production and synchronous formaldehyde removal in wastewater

Formaldehyde(FA),as an important chemical raw material,has been widely used in many fields.However,the discharge of a large amount of FA-containing wastewater poses a serious threat to the environment and human health.Recently,the in-situ hydrogen energy release technology of hydrogen-containing stable liquid has been extensively explored due to its safe storage.Exploring a robust method to achieve FA removal and synchronous in-situ hydrogen release from FA containing wastewater is of great significant for environmental protection and energy crisis alleviation.Here,we have innovatively introduced peroxymonosulfate(PMS)activation technology into FA removal and hydrogen production simultaneously.The composite of nitrogen doped carbon coating Co_(9)S_(8)nanotubes(Co_(9)S_(8)@N-C)is employed as a proof of concept for FA decomposition and simultaneously hydrogen production based on PMS activation system.As expected,the Co_(9)S_(8)@N-C/PMS system presents much superior hydrogen production efficiency and satisfactory FA removal rate towards FA wastewater than those of common catalysis,photocatalysis and Fenton reaction in the basic condition in a wide range of FA concentration.The hydrogen yield reaches a value as high as 471μmol within 60 min,corresponding to a FA degradation rate of 30%with an initial FA concentration of 0.722 mol L^(-1).Characterizations and density functional theory(DFT)calculations suggest that the free radical process dominated by superoxide radical(O_(2)·^(-))and nonradical process dominated by singlet oxygen(^(1)O_(2)),which are induced by Co_(9)S_(8)@N-C/PMS system,are responsible for highly efficient hydrogen production via FA degradation.These generated O_(2)·^(-)and ^(1)O_(2)can extract·H from FA to form·OOH intermediate,which can further combine with the·H from water to produce hydrogen.This study provides an applicable technique for environmental purification and new energy development based on FA containing wastewater.