To improve the osteogenic property of bone repairing materials and to accelerate bone healing are major tasks in bone biomaterials research. The objective of this study was to investigate if the mechanical force could...To improve the osteogenic property of bone repairing materials and to accelerate bone healing are major tasks in bone biomaterials research. The objective of this study was to investigate if the mechanical force could be used to accelerate bone formation in a bony defect in vivo. The calcium sulfate cement was implanted into the left distal femoral epiphyses surgically in 16 rats. The half of rats were subjected to external mechanical force via treadmill exercise, the exercise started at day 7 postoperatively for 30 consecutive days and at a constant speed 8 m·min-1 for 45 min·day-1, while the rest served as a control. The rats were scanned four times longitudinally after surgery using microcomputed tomography and newly formed bone was evaluated. After sacrificing, the femurs had biomechanical test of three-point bending and histological analysis. The results showed that bone healing under mechanical force were better than the control with residual defect areas of 0.64±0.19 mm2 and 1.78±0.39 mm2（P〈0.001）, and the ultimate loads to failure under mechanical force were 69.56±4.74 N, stronger than the control with ultimate loads to failure of 59.17±7.48 N（P=0.039）. This suggests that the mechanical force might be used to improve new bone formation and potentially offer a clinical strategy to accelerate bone healing.展开更多
The Qaidam Basin in the NE Tibetan Plateau has contributed the largest amount of potash in China.However,how the potash was formed has long been a subject of debate.Here we carried out a deep drilling
A barotropic channel model in β-plane is used to study the effect of topographic forcing on the formation and maintenance of blocking. The approximate analytical solution of potential vorticity equation can show the ...A barotropic channel model in β-plane is used to study the effect of topographic forcing on the formation and maintenance of blocking. The approximate analytical solution of potential vorticity equation can show the main property of the whole process of blocking. It is indicated that the topographic forcing is one of the main factors causing the blocking process. The results suggest that the nonlinear interaction plays a very important role in the stable 'Ω' situation of blocking. The atmospheric circulation with periodic and low-frequency oscillation, perhaps, is partly caused by topographic forcing.展开更多
A design of a slot bushing with a volumetric field has been developed, which allows to produce continuous fibers from melts with difficult processing characteristics in order to produce fibers with better operating ch...A design of a slot bushing with a volumetric field has been developed, which allows to produce continuous fibers from melts with difficult processing characteristics in order to produce fibers with better operating characteristics. The operability of the design was confirmed when solving two problems of special technological complexity. 1. 400 and 800 orifice bushings for production of continuous fibers from the basalt melt have been developed and recommended for manufacture. 2. The process of production of continuous fibers from standard glass using 2400 orifice bushing with perforated plates instead of orifice tips without air cooling, has been realized for the first time.展开更多
This paper focuses on the simulation analysis of stripe formation and dynamic features of intersecting pedestrian flows.The intersecting flows consist of two streams of pedestrians and each pedestrian stream has a des...This paper focuses on the simulation analysis of stripe formation and dynamic features of intersecting pedestrian flows.The intersecting flows consist of two streams of pedestrians and each pedestrian stream has a desired walking direction.The model adopted in the simulations is the social force model, which can reproduce the self-organization phenomena successfully. Three scenarios of different cross angles are established. The simulations confirm the empirical observations that there is a stripe formation when two streams of pedestrians intersect and the direction of the stripes is perpendicular to the sum of the directional vectors of the two streams. It can be concluded from the numerical simulation results that smaller cross angle results in higher mean speed and lower level of speed fluctuation. Moreover, the detailed pictures of pedestrians＇ moving behavior at intersections are given as well.展开更多
The characteristics and climatology of funnel clouds in Alaska were examined using operational radiosondes, surface meteorological observations, and reanalysis data. Funnel clouds occurred under weak synoptic forcing ...The characteristics and climatology of funnel clouds in Alaska were examined using operational radiosondes, surface meteorological observations, and reanalysis data. Funnel clouds occurred under weak synoptic forcing between May and September between 11 am and 6 pm Alaska Daylight Time with a maximum occurrence in July. They occurred under Convective Available Potential Energy >500 J·kg-1 and strong low-level wind shear. Characteristic atmospheric profiles during funnel cloud events served to develop a retrieval algorithm based on similarity testing. Out of more than 129,000 soundings between 1971 and 2014, 2724, 442, and 744 profiles were similar to the profiles of observed funnel cloud events in the Interior, Alaska West Coast, and Anchorage regions. While the number of reported funnel clouds has increased since 2000, the frequency of synoptic situations favorable for such events has decreased.展开更多
基金supported in part by the Natural Science Foundation of China under the grants of 11072165,31270995 and 81320108018
文摘To improve the osteogenic property of bone repairing materials and to accelerate bone healing are major tasks in bone biomaterials research. The objective of this study was to investigate if the mechanical force could be used to accelerate bone formation in a bony defect in vivo. The calcium sulfate cement was implanted into the left distal femoral epiphyses surgically in 16 rats. The half of rats were subjected to external mechanical force via treadmill exercise, the exercise started at day 7 postoperatively for 30 consecutive days and at a constant speed 8 m·min-1 for 45 min·day-1, while the rest served as a control. The rats were scanned four times longitudinally after surgery using microcomputed tomography and newly formed bone was evaluated. After sacrificing, the femurs had biomechanical test of three-point bending and histological analysis. The results showed that bone healing under mechanical force were better than the control with residual defect areas of 0.64±0.19 mm2 and 1.78±0.39 mm2（P〈0.001）, and the ultimate loads to failure under mechanical force were 69.56±4.74 N, stronger than the control with ultimate loads to failure of 59.17±7.48 N（P=0.039）. This suggests that the mechanical force might be used to improve new bone formation and potentially offer a clinical strategy to accelerate bone healing.
文摘The Qaidam Basin in the NE Tibetan Plateau has contributed the largest amount of potash in China.However,how the potash was formed has long been a subject of debate.Here we carried out a deep drilling
文摘A barotropic channel model in β-plane is used to study the effect of topographic forcing on the formation and maintenance of blocking. The approximate analytical solution of potential vorticity equation can show the main property of the whole process of blocking. It is indicated that the topographic forcing is one of the main factors causing the blocking process. The results suggest that the nonlinear interaction plays a very important role in the stable 'Ω' situation of blocking. The atmospheric circulation with periodic and low-frequency oscillation, perhaps, is partly caused by topographic forcing.
文摘A design of a slot bushing with a volumetric field has been developed, which allows to produce continuous fibers from melts with difficult processing characteristics in order to produce fibers with better operating characteristics. The operability of the design was confirmed when solving two problems of special technological complexity. 1. 400 and 800 orifice bushings for production of continuous fibers from the basalt melt have been developed and recommended for manufacture. 2. The process of production of continuous fibers from standard glass using 2400 orifice bushing with perforated plates instead of orifice tips without air cooling, has been realized for the first time.
基金Project supported by the National Natural Science Foundation of China(Grant No.61233001)the Fundamental Research Funds for the Central Universities,China(Grant No.2017JBM014)
文摘This paper focuses on the simulation analysis of stripe formation and dynamic features of intersecting pedestrian flows.The intersecting flows consist of two streams of pedestrians and each pedestrian stream has a desired walking direction.The model adopted in the simulations is the social force model, which can reproduce the self-organization phenomena successfully. Three scenarios of different cross angles are established. The simulations confirm the empirical observations that there is a stripe formation when two streams of pedestrians intersect and the direction of the stripes is perpendicular to the sum of the directional vectors of the two streams. It can be concluded from the numerical simulation results that smaller cross angle results in higher mean speed and lower level of speed fluctuation. Moreover, the detailed pictures of pedestrians＇ moving behavior at intersections are given as well.
基金the National Science Foundation(NSF),the SOARS program,the Gwichyaa Zhee Gwich’in Tribal Government,and SLOAN for financial support.
文摘The characteristics and climatology of funnel clouds in Alaska were examined using operational radiosondes, surface meteorological observations, and reanalysis data. Funnel clouds occurred under weak synoptic forcing between May and September between 11 am and 6 pm Alaska Daylight Time with a maximum occurrence in July. They occurred under Convective Available Potential Energy >500 J·kg-1 and strong low-level wind shear. Characteristic atmospheric profiles during funnel cloud events served to develop a retrieval algorithm based on similarity testing. Out of more than 129,000 soundings between 1971 and 2014, 2724, 442, and 744 profiles were similar to the profiles of observed funnel cloud events in the Interior, Alaska West Coast, and Anchorage regions. While the number of reported funnel clouds has increased since 2000, the frequency of synoptic situations favorable for such events has decreased.
