Reservoir quality evaluation of the Narimba Formation in Bass Basin,Australia:Implications from petrophysical analysis,sedimentological features,capillary pressure and wetting fluid saturation

The evaluation of reservoir quality was accomplished on the Late Paleocene to Early Eocene Narimba Formation in Bass Basin,Australia.This study involved combination methods such as petrophysical analysis,petrography and sedimentological studies,reservoir quality and fluid flow units from derivative parameters,and capillary pressure and wetting fluid saturation relationship.Textural and diagenetic features are affecting the reservoir quality.Cementation,compaction,and presence of clay minerals such as kaolinite are found to reduce the quality while dissolution and secondary porosity are noticed to improve it.It is believed that the Narimba Formation is a potential reservoir with a wide range of porosity and permeability.Porosity ranges from 3.1%to 25.4%with a mean of 15.84%,while permeability ranges between 0.01 mD and 510 mD,with a mean of 31.05 mD.Based on the heterogenous lithology,the formation has been categorized into five groups based on permeability variations.Group I showed an excellent to good quality reservoir with coarse grains.The impacts of both textural and diagenetic features improve the reservoir and producing higher reservoir quality index(RQI)and flow zone indicators(FZI)as well as mostly mega pores.The non-wetting fluid migration has the higher possibility to flow in the formation while displacement pressure recorded as zero.Group II showed a fair quality reservoir with lower petrophysical properties in macro pores.The irreducible water saturation is increasing while the textural and digenetic properties are still enhancing the reservoir quality.Group III reflects lower quality reservoir with mostly macro pores and higher displacement pressure.It may indicate smaller grain size and increasing amount of cement and clay minerals.Group IV,and V are interpreted as a poor-quality reservoir that has lower RQI and FZI.The textural and digenetic features are negatively affecting the reservoir and are leading to smaller pore size and pore throat radii(r35)values to be within the range of macro,meso-,micro-,and nano pores.The capillary displacement pressure curves of the three groups show increases reaching the maximum value of 400 psia in group V.Agreement with the classification of permeability,r35 values,and pore type can be used in identifying the quality of reservoir.

Reservoir characteristics and formation model of Upper Carboniferous bauxite series in eastern Ordos Basin,NW China

Through core observation,thin section identification,X-ray diffraction analysis,scanning electron microscopy,and low-temperature nitrogen adsorption and isothermal adsorption experiments,the lithology and pore characteristics of the Upper Carboniferous bauxite series in eastern Ordos Basin were analyzed to reveal the formation and evolution process of the bauxite reservoirs.A petrological nomenclature and classification scheme for bauxitic rocks based on three units(aluminum hydroxides,iron minerals and clay minerals)is proposed.It is found that bauxitic mudstone is in the form of dense massive and clastic structures,while the(clayey)bauxite is of dense massive,pisolite,oolite,porous soil and clastic structures.Both bauxitic mudstone and bauxite reservoirs develop dissolution pores,intercrystalline pores,and microfractures as the dominant gas storage space,with the porosity less than 10% and mesopores in dominance.The bauxite series in the North China Craton can be divided into five sections,i.e.,ferrilite(Shanxi-style iron ore,section A),bauxitic mudstone(section B),bauxite(section C),bauxite mudstone(debris-containing,section D)and dark mudstone-coal section(section E).The burrow/funnel filling,lenticular,layered/massive bauxite deposits occur separately in the karst platforms,gentle slopes and low-lying areas.The karst platforms and gentle slopes are conducive to surface water leaching,with strong karstification,well-developed pores,large reservoir thickness and good physical properties,but poor strata continuity.The low-lying areas have poor physical properties but relatively continuous and stable reservoirs.The gas enrichment in bauxites is jointly controlled by source rock,reservoir rock and fractures.This recognition provides geological basis for the exploration and development of natural gas in the Upper Carboniferous in the study area and similar bauxite systems.

Facies-controlled prediction of dolomite reservoirs in the Middle Permian Qixia Formation in Shuangyushi,northwestern Sichuan Basin

The Middle Permian Qixia Formation in the Shuangyushi area,northwestern Sichuan Basin,develops shoal-facies dolomite reservoirs.To pinpoint promising reservoirs in the Qixia Formation,deep thin shoal-facies dolomite reservoirs were predicted using the techniques of pre-stack Kirchhoff-Q compensation for absorption,inverse Q filtering,low-to high-frequency compensation,forward modeling,and facies-controlled seismic meme inversion.The results are obtained in six aspects.First,the dolomite reservoirs mainly exist in the middle and lower parts of the second member of Qixia Formation(Qi2 Member),which coincide with the zones shoal cores are developed.Second,the forward modeling shows that the trough energy at the top and bottom of shoal core increases with increasing shoal-core thickness,and weak peak reflections are associated in the middle of shoal core.Third,five types of seismic waveform are identified through waveform analysis of seismic facies.Type-Ⅰ and Type-Ⅱ waveforms correspond to promising facies(shoal core microfacies).Fourth,vertically,two packages of thin dolomite reservoirs turn up in the sedimentary cycle of intraplatform shoal in the Qi2 Member,and the lower package is superior to the upper package in dolomite thickness,scale and lateral connectivity.Fifth,in plane,significantly controlled by sedimentary facies,dolomite reservoirs laterally distribute with consistent thickness in shoal cores at topographical highs and extend toward the break.Sixth,the promising prospects are the zones with thick dolomite reservoirs and superimposition of horstegraben structural traps.

Reservoir quality of the Late Cretaceous Volador Formation of the Latrobe group,Gippsland Basin,Australia:Implications from integrated analytical techniques

Increasing demand for energy due to the populous Eastern Australia has driven oil and gas industries to find new sources of hydrocarbons as they are the primary energy suppliers.Intensive study has been done on the Volador Formation in the Gippsland Basin by means of core-based petrophysical,sedimentological,and petrographic analyses as well as well log-based interpretation and capillary pressure test.Five wells from Kipper,Basker and Tuna fields with available dataset were investigated in this study:Kipper-1,Basker-1,Basker-2,Basker-5 and Tuna-4.Overall,the formation has good reservoir quality based on the high porosity and permeability values obtained through core and well log petrophysical analyses.The formation made up of mostly moderate to coarse quartz grains that has experienced strong anti-compaction and is poorly cemented.Montmorillonite and illite clays are seen dispersed in the rock formation,with the minority being mixed clays.These clays and diagenetic features including kaolinite cement and quartz overgrowth that can lead to porosity reduction only have insignificant impact on the overall reservoir quality.In addition,capillary pressure data shows that most samples are found in the transition to good reservoir zones(<50%saturation).The results obtained from this study have shown that the Volador Formation in the Gippsland Basin is worth for hydrocarbon exploration.

Formation damage mechanism and control strategy of the compound function of drilling fluid and fracturing fluid in shale reservoirs

For the analysis of the formation damage caused by the compound function of drilling fluid and fracturing fluid,the prediction method for dynamic invasion depth of drilling fluid is developed considering the fracture extension due to shale minerals erosion by oil-based drilling fluid.With the evaluation for the damage of natural and hydraulic fractures caused by mechanical properties weakening of shale fracture surface,fracture closure and rock powder blocking,the formation damage pattern is proposed with consideration of the compound effect of drilling fluid and fracturing fluid.The formation damage mechanism during drilling and completion process in shale reservoir is revealed,and the protection measures are raised.The drilling fluid can deeply invade into the shale formation through natural and induced fractures,erode shale minerals and weaken the mechanical properties of shale during the drilling process.In the process of hydraulic fracturing,the compound effect of drilling fluid and fracturing fluid further weakens the mechanical properties of shale,results in fracture closure and rock powder shedding,and thus induces stress-sensitive damage and solid blocking damage of natural/hydraulic fractures.The damage can yield significant conductivity decrease of fractures,and restrict the high and stable production of shale oil and gas wells.The measures of anti-collapse and anti-blocking to accelerate the drilling of reservoir section,forming chemical membrane to prevent the weakening of the mechanical properties of shale fracture surface,strengthening the plugging of shale fracture and reducing the invasion range of drilling fluid,optimizing fracturing fluid system to protect fracture conductivity are put forward for reservoir protection.

Genetic mechanisms of high-quality tight siliciclastic reservoirs:A case study from the Upper Triassic Xujiahe Formation in the Yuanba area,Sichuan Basin,China

This study analyzed the petrological characteristics,diagenesis,pore types,and physical properties of the tight coarse-grained siliciclastic sequences in the third member of the Upper Triassic Xujiahe Formation(also referred to as the Xu-3 Member)in the western Yuanba area in the northeastern Sichuan Basin,China,based on the results of 242.61-m-long core description,292 thin-section observations,scanning electron microscopy(SEM),and 292 physical property tests.The types and genetic mechanisms of high-quality tight coarse-grained siliciclastic reservoirs in this member was determined thereafter.The research objective is to guide the exploration and development of the tight coarse-grained siliciclastic sequences in the Xu-3 Member.The results of this study are as follows.Two types of high-quality reservoirs are developed in the coarse-grained siliciclastic sequences of the Xu-3 Member,namely the fractured fine-grained sandy conglomerate type and porous medium-grained calcarenaceous sandstone type.Hydrodynamic energy in the sedimentary environment is the key factor controlling the formation of high-quality reservoirs.These high-quality reservoirs are developed mainly in the transitional zone with moderately high hydrodynamic energy between delta-plain braided channels and delta-front subaqueous distributary channels.The dolomitic debris(gravel)content is the main factor affecting the reservoirs’physical properties.The micritic algal debris and sandy debris in the dolomitic debris(or gravels)tend to recrystallize during burial,forming intercrystalline pores within.In the medium-grained calcarenaceous sandstones,intercrystalline pores in the dolomitic debris are formed at the early diagenetic stage,and a pore system consisting of structural fractures connecting intergranular pores,intergranular dissolution pores,and kaolinite intergranular micropores is developed at the late stage of diagenesis.The formation of intercrystalline pores in dolomite gravels and gravel-edge fractures,a pore system connected by gravel-edge and tectonic fractures,is closely related to the dolomite gravels in the sandy fine-grained conglomerates.

Genetic mechanism and main controlling factors of high-quality clastic rock reservoirs in deep and ultradeep layers:A case study of Oligocene Linhe Formation in Linhe Depression,Hetao Basin,NW China

Based on new data from cores,drilling and logging,combined with extensive rock and mineral testing analysis,a systematic analysis is conducted on the characteristics,diagenesis types,genesis and controlling factors of deep to ultra-deep abnormally high porosity clastic rock reservoirs in the Oligocene Linhe Formation in the Hetao Basin.The reservoir space of the deep to ultra-deep clastic rock reservoirs in the Linhe Formation is mainly primary pores,and the coupling of three favorable diagenetic elements,namely the rock fabric with strong compaction resistance,weak thermal compaction diagenetic dynamic field,and diagenetic environment with weak fluid compaction-weak cementation,is conducive to the preservation of primary pores.The Linhe Formation clastic rocks have a superior preexisting material composition,with an average total content of 90%for quartz,feldspar,and rigid rock fragments,and strong resistance to compaction.The geothermal gradient in Linhe Depression in the range of(2.0–2.6)°C/100 m is low,and together with the burial history of long-term shallow burial and late rapid deep burial,it forms a weak thermal compaction diagenetic dynamic field environment.The diagenetic environment of the saline lake basin is characterized by weak fluid compaction.At the same time,the paleosalinity has zoning characteristics,and weak cementation in low salinity areas is conducive to the preservation of primary pores.The hydrodynamic conditions of sedimentation,salinity differentiation of ancient water in saline lake basins,and sand body thickness jointly control the distribution of high-quality reservoirs in the Linhe Formation.

3D reservoir characterization of the Mangahewa Formation,Mangahewa Field,Taranaki Basin,New Zealand

The Mangahewa Formation is the primary reservoir target in the Mangahewa Field in the Taranaki Basin,New Zealand.This formation is distinguished by its marginal marine substantial tight-sand reservoir,having thickness exceeding 800 m.The aim of this study is to assess the reservoir properties of the Mangahewa Formation through 3D reservoir modeling,employing 3D seismic data,core data,and well data from the Mangahewa Field.Utilizing variance attributes,the faults and horizons have been identified successfully within the field.The majority of the interpreted faults exhibit dip angles exceeding 60°,with a maximum displacement of 118 m.To detect direct hydrocarbon indicators,root-mean-square amplitude seismic attribute,envelope,and generalized spectral decomposition techniques have been employed.Subsequently,four lithofacies,comprising 78.3%sandstone,9.2%siltstone,9.5%claystone,and 3.0%coal have been established by utilizing the Sequential Indicator Simulation(SIS)algorithm to create a lithofacies model.A property model has been generated using the Sequential Gaussian Simulation(SGS)algorithm.Petrophysical evaluation indicates that the Mangahewa Formation exhibits reservoir qualities ranging from fair to good,with porosity levels between 8%and 11%,permeability averaging up to 10 mD,variable shale volumes,and hydrocarbon saturation in the range of 40%-50%.This study's methodologies and findings can serve as a valuable foundation for similar investigations in other tightsand gas fields located in different regions.

Igneous intrusion contact metamorphic system and its reservoir characteristics:A case study of Paleogene Shahejie Formation in Nanpu sag of Bohai Bay Basin,China

Taking the Paleogene Shahejie Formation in Nanpu sag of Bohai Bay Basin as an example,this study comprehensively utilizes seismic,mud logging,well logging,physical property analysis and core thin section data to investigate the metamorphic reservoir formed by contact metamorphism after igneous rock intrusion.(1)A geological model of the igneous intrusion contact met amorphic system is proposed,which can be divided into five structural layers vertically:the intrusion,upper metamorphic aureole,lower metamorphic aureole,normal sedimentary layers on the roof and floor.(2)The intrusion is characterized by xenoliths indicating intrusive facies at the top,regular changes in rock texture and mineral crystallization from the center to the edge on a microscopic scale,and low-angle oblique penetrations of the intrusion through sedimentary strata on a macroscopic scale.The metamorphic aureole has characteristics such as sedimentary rocks as the host rock,typical palimpsest textures developed,various low-temperature thermal metamorphic minerals developed,and medium-low grade thermal metamorphic rocks as the lithology.(3)The reservoir in contact metamorphic aureole has two types of reservoir spaces:matrix pores and fractures.The matrix pores are secondary"intergranular pores"distributed around metamorphic minerals after thermal metamorphic transformation in metasandstones.The fractures are mainly structural fractures and intrusive compressive fractures in metamudstones.The reservoirs generally have three spatial distribution characteristics:layered,porphyritic and hydrocarbon impregnation along fracture.(4)The distribution of reservoirs in the metamorphic aureole is mainly controlled by the intensity of thermal baking.Furthermore,the distribution of favorable reservoirs is controlled by the coupling of favorable lithofacies and thermal contact metamorphism,intrusive compression and hydrothermal dissolution.The proposal and application of the geological model of the intrusion contact metamorphic system are expected to promote the discovery of exploration targets of contact metamorphic rock in Nanpu sag,and provide a reference for the study and exploration of deep contact metamorphic rock reservoirs in the Bohai Bay Basin.

Formation mechanisms and resource potential of carbonate geothermal reservoirs in the Beijing-Tianjin-Hebei plain

Investigating the formation mechanisms of carbonate geothermal reservoirs is of theoretical and practical significance for summarizing the formation pattern of geothermal resources and further guiding their effective exploitation.The Beijing-Tianjin-Hebei Plain(BTHP),predominantly located within the Jizhong Depression and Cangxian Uplift in the Bohai Bay Basin,serves as the primary region for geothermal exploitation and utilization in China.More than 1500 geothermal wells have been drilled therein,with water temperature at the wellhead ranging from 55 to 110°C,single-well flow rate ranging between 80 and 120 m^(3)/h,and cumulative heating area exceeding 100×10^(6)m^(3).However,the exploration and research in the region remain limited overall.As per the previous geothermal and petroleum exploration results and the latest geothermal drilling data,this study comprehensively evaluated the geothermal resources of karst geothermal reservoirs.The results show that two suites of carbonate karst reservoirs,namely the Jxw Formation and the Ordovician strata,have primarily developed in the BTHP,and their formation and evolution can be divided into four stages:the Mesoproterozoic-Early Paleozoic stage with carbonate sedimentation and the development of interlayer karst,the Late Paleozoic stage with the development of direct sedimentary cover,the Mesozoic stage with compressional uplifting and development of buried hill karst,and the Cenozoic stage with regional cover deposition and the modification and finalization of karst geothermal reservoirs.Accordingly,the porosity evolution history of the geothermal reservoirs is composed of three stages,namely a significant decrease followed by a minor increase,a gradual decline,and then a small fluctuation from increase to decrease before slowly rising again.The karstification in geothermal reservoirs can be summarized into quasi-syngenetic karstification,epigenetic karstification,and burial karstification,which can be subdivided into seven subcategories.The carbonate geothermal reservoirs in the study area boast total geothermal resources of 53.821×10^(9)GJ,or 184.155×10^(9)t of standard coal equivalent(tce),and the annual exploitable geothermal resources in the urban area can heat an area of(400‒500)×10^(6)m^(3),indicating great potential of geothermal exploitation.

Application of 9-component S-wave 3D seismic data to study sedimentary facies and reservoirs in a biogasbearing area:A case study on the Pleistocene Qigequan Formation in Taidong area,Sanhu Depression,Qaidam Basin,NW China

To solve the problems in restoring sedimentary facies and predicting reservoirs in loose gas-bearing sediment,based on seismic sedimentologic analysis of the first 9-component S-wave 3D seismic dataset of China,a fourth-order isochronous stratigraphic framework was set up and then sedimentary facies and reservoirs in the Pleistocene Qigequan Formation in Taidong area of Qaidam Basin were studied by seismic geomorphology and seismic lithology.The study method and thought are as following.Firstly,techniques of phase rotation,frequency decomposition and fusion,and stratal slicing were applied to the 9-component S-wave seismic data to restore sedimentary facies of major marker beds based on sedimentary models reflected by satellite images.Then,techniques of seismic attribute extraction,principal component analysis,and random fitting were applied to calculate the reservoir thickness and physical parameters of a key sandbody,and the results are satisfactory and confirmed by blind testing wells.Study results reveal that the dominant sedimentary facies in the Qigequan Formation within the study area are delta front and shallow lake.The RGB fused slices indicate that there are two cycles with three sets of underwater distributary channel systems in one period.Among them,sandstones in the distributary channels of middle-low Qigequan Formation are thick and broad with superior physical properties,which are favorable reservoirs.The reservoir permeability is also affected by diagenesis.Distributary channel sandstone reservoirs extend further to the west of Sebei-1 gas field,which provides a basis to expand exploration to the western peripheral area.

Geological characteristics of unconventional tight oil reservoir (10^(9) t): A case study of Upper Cretaceous Qingshankou Formation, northern Songliao Basin, NE China

The Daqing exploration area in the northern Songliao Basin has great potential for unconventional oil and gas resources,among which the total resources of tight oil alone exceed 109 t and is regarded as an important resource base of Daqing oilfield.After years of exploration in the Qijia area,Songliao Basin,NE China,tight oil has been found in the Upper Cretaceous Qingshankou Formation.To work out tight oil’s geological characteristics,taking tight oil in Gaotaizi oil layers of the Upper Cretaceous Qingshankou Formation in northern Songliao Basin as an example,this paper systematically analyzed the geological characteristics of unconventional tight oil in Gao3 and Gao4 layers of the Qijia area,based on the data of the geological survey,well drilling journey,well logging,and test.It is that three sets of hydrocarbon source rocks(K2qn1,K2qn2+3,and K2n1)develop in the examined area,and exhibit excellent type I and II kerogens,high organic matter abundance,and moderate maturity.The reservoir is generally composed of thin-bedded mudstone,siltstone,and sandstone,and presents poor porosity(average 8.5 vol.%)and air permeability(average 4 mD).The main reservoir space primarily includes intergranular pores,secondary soluble pores,and intergranular soluble pores.Three types of orifice throats were identified,namely fine throat,extra-fine throat,and micro-fine throat.The siltstone is generally oil-bearing,the reservoirs with slime and calcium become worse oil-bearing,and the mudstone has no obvious oil-bearing characteristics.The brittleness indices of the sandstone in the tight oil reservoir range from 40%to 60%,and those of the mudstone range from 40%to 45%,indicating a better brittleness of the tight oil reservoir.Based on the study of typical core hole data,this paper gives a comprehensive evaluation of the properties of the tight oil and establishes a tight oil single well composite bar chart as well as the initial evaluation system with the core of properties in the tight oil reservoir.This study has theoretical guiding significance and practical application value for tight oil exploration and evaluation in the Qijia area.

Influences of burial process on diagenesis and high-quality reservoir development of deep-ultra-deep clastic rocks:A case study of Lower Cretaceous Qingshuihe Formation in southern margin of Junggar Basin,NW China

Taking the Lower Cretaceous Qingshuihe Formation in the southern margin of Junggar Basin as an example,the influences of the burial process in a foreland basin on the diagenesis and the development of high-quality reservoirs of deep and ultra-deep clastic rocks were investigated using thin section,scanning electron microscope,electron probe,stable isotopic composition and fluid inclusion data.The Qingshuihe Formation went through four burial stages of slow shallow burial,tectonic uplift,progressive deep burial and rapid deep burial successively.The stages of slow shallow burial and tectonic uplift not only can alleviate the mechanical compaction of grains,but also can maintain an open diagenetic system in the reservoirs for a long time,which promotes the dissolution of soluble components by meteoric freshwater and inhibits the precipitation of dissolution products in the reservoirs.The late rapid deep burial process contributed to the development of fluid overpressure,which effectively inhibits the destruction of primary pores by compaction and cementation.The fluid overpressure promotes the development of microfractures in the reservoir,which enhances the dissolution effect of organic acids.Based on the quantitative reconstruction of porosity evolution history,it is found that the long-term slow shallow burial and tectonic uplift processes make the greatest contribution to the development of deep-ultra-deep high-quality clastic rock reservoirs,followed by the late rapid deep burial process,and the progressive deep burial process has little contribution.

Geometry and formation mechanism of tension gashes and their implication on the hydrocarbon accumulation in the deep-seated strata of sedimentary basin:A case from Shunnan area of Tarim Basin

With the theoretical and technological developments related to cratonic strike-slip faults,the Shuntuoguole Low Uplift in the Tarim Basin has attracted considerable attention recently.Affected by multi-stage tectonic movements,the strike-slip faults have controlled the distribution of hydrocarbon resources owing to the special fault characteristics and fault-related structures.In contrast,the kinematics and formation mechanism of strike-slip faults in buried sedimentary basins are difficult to investigate,limiting the discussion of these faults and hydrocarbon accumulation.In this study,we identified the characteristics of massive sigmoidal tension gashes(STGs)that formed in the Shunnan area of the Tarim Basin.High-resolution three-dimensional seismic data and attribute analyses were used to investigate their geometric and kinematic characteristics.Then,the stress state of each point of the STGs was calculated using seismic curvature attributes.Finally,the formation mechanism of the STGs and their roles in controlling hydrocarbon migration and accumulation were discussed.The results suggest that:(1)the STGs developed in the Shunnan area have a wide distribution,with a tensile fault arranged in an enéchelon pattern,showing an S-shaped bending.These STGs formed in multiple stages,and differential rotation occurred along the direction of strike-slip stress during formation.(2)Near the principal displacement zone of the strike-slip faults,the stress value of the STGs was higher,gradually decreasing at both ends.The shallow layer deformation was greater than the deep layer deformation.(3)STGs are critical for connecting source rocks,migrating oil and gas,sealing horizontally,and developing efficient reservoirs.This study not only provides seismic evidence for the formation and evolution of super large STGs,but also provides certain guidance for oil and gas exploration in this area.

Discovery and petroleum geological significance of delta in the third member of Oligocene Lingshui Formation in southern Baodao Sag,Qiongdongnan Basin,South China Sea

Based on the 3D seismic data and the analysis and test data of lithology,electricity,thin sections and chronology obtained from drilling of the Qiongdongnan Basin,the characteristics and the quantitative analysis of the source-sink system are studied of the third member of the Upper Oligocene Lingshui Formation(Ling 3 Member)in the southern fault step zone of the Baodao Sag.First,the YL10 denudation area of the Ling 3 Member mainly developed two fluvial systems in the east and west,resulting in the formation of two dominant sand transport channels and two delta lobes in southern Baodao Sag,which are generally large in the west and small in the east.The evolution of the delta has experienced four stages:initiation,prosperity,intermittence and rejuvenation.Second,the source-sink coupled quantitative calculation is performed depending on the parameters of the delta sand bodies,including development phases,distribution area,flattening thickness,area of different parent rocks,and sand-forming coefficient,showing that the study area has the material basis for the formation of large-scale reservoir.Third,the drilling reveals that the delta of the Ling 3 Member is dominated by fine sandstone,with total sandstone thickness of 109-138 m,maximum single-layer sandstone thickness of 15.5-30.0 m,and sand-to-strata ratio of 43.7%-73.0%,but the physical properties are different among the fault steps.Fourth,the large delta development model of the small source area in the step fault zone with multi-stage uplift is established.It suggests that the episodic uplift provides sufficient sediments,the fluvial system and watershed area control the scale of the sand body,the multi-step active fault steps dominate the sand body transport channel,and local fault troughs decide the lateral propulsion direction of the sand body.The delta of the Ling 3 Member is coupled with fault blocks to form diverse traps,which are critical exploration targets in southern Baodao Sag.

Subsection and superposition method for reservoir formation damage evaluation of complex-structure wells

Kinds of complex-structure wells can effectively improve production,which are widely used.However,in the process of drilling and completion,complex-structure wells with long drilling cycle and large exposed area of reservoir can lead to the fact that reservoir near wellbore is more vulnerable to the working fluid invasion,resulting in more serious formation damage.In order to quantitatively describe the reservoir formation damage in the construction of complex-structure well,taking the inclined well section as the research object,the coordinate transformation method and conformal transformation method are given according to the flow characteristics of reservoir near wellbore in anisotropic reservoir.Then the local skin factor in orthogonal plane of wellbore is deduced.Considering the un-even distribution of local skin factor along the wellbore,the oscillation decreasing model and empirical equation model of damage zone radius distribution along the wellbore direction are established and then the total skin factor model of the whole well is superimposed to realize the reservoir damage evaluation of complex-structure wells.Combining the skin factor model with the production model,the production of complex-structure wells can be predicted more accurately.The two field application cases show that the accuracy of the model can be more than 90%,which can also fully reflect the invasion characteristics of drilling and completion fluid in any well section of complex-structure wells in anisotropic reservoir,so as to further provide guidance for the scientific establish-ment of reservoir production system.

Hydrocarbon indication in Rio Bonito Formation sandstone:Implication for CO_(2)storage in São Paulo,Brazil

São Paulo State has witnessed CO_(2)storage-based investigations considering the availability of suitable geologic structures and proximity to primary CO_(2)source sinks related to bioenergy and carbon capture and storage(BECCS)activities.The current study presents the hydrocarbon viability evaluations and CO_(2)storage prospects,focusing on the sandstone units of the Rio Bonito Formation.The objective is to apply petrophysical evaluations with geochemical inputs in predicting future hydrocarbon(gas)production to boost CO_(2)storage within the study location.The study used data from eleven wells with associated wireline logs(gamma ray,resistivity,density,neutron,and sonic)to predict potential hydrocarbon accumulation and fluid mobility in the investigated area.Rock samples(shale and carbonate)obtained from depths>200 m within the study location have shown bitumen presence.Organic geochemistry data of the Rio Bonito Formation shale beds suggest they are potential hydrocarbon source rocks and could have contributed to the gas accumulations within the sandstone units.Some drilled well data,e.g.,CB-1-SP and TI-1-SP,show hydrocarbon(gas)presence based on the typical resistivity and the combined neutron-density responses at depths up to 3400 m,indicating the possibility of other hydrocarbon members apart from the heavy oil(bitumen)observed from the near-surface rocks samples.From the three-dimensional(3-D)model,the free fluid indicator(FFI)is more significant towards the southwest and southeast of the area with deeper depths of occurrence,indicating portions with reasonable hydrocarbon recovery rates and good prospects for CO_(2)injection,circulation and permanent storage.However,future studies based on contemporary datasets are required to establish the hydrocarbon viability further,foster gas production events,and enhance CO_(2)storage possibilities within the region.

Heterogeneity and differential hydrocarbon accumulation model of deep reservoirs in foreland thrust belts: A case study of deep Cretaceous Qingshuihe Formation clastic reservoirs in southern Junggar Basin, NW China

Using the data of drilling, logging, core, experiments and production, the heterogeneity and differential hydrocarbon accumulation model of deep reservoirs in Cretaceous Qingshuihe Formation(K1q) in the western section of the foreland thrust belt in southern Junggar Basin are investigated. The target reservoirs are characterized by superimposition of conglomerates, sandy conglomerates and sandstones, with high content of plastic clasts. The reservoir space is mainly composed of intergranular pores. The reservoirs are overall tight, and the sandy conglomerate has the best physical properties. The coupling of short deep burial period with low paleotemperature gradient and formation overpressure led to the relatively weak diagenetic strength of the reservoirs. Specifically, the sandy conglomerates show relatively low carbonate cementation, low compaction rate and high dissolution porosity. The special stress-strain mechanism of the anticline makes the reservoirs at the top of the anticline turning point more reformed by fractures than those at the limbs, and the formation overpressure makes the fractures in open state. Moreover, the sandy conglomerates have the highest oil saturation. Typical anticline reservoirs are developed in deep part of the thrust belt, but characterized by "big trap with small reservoir". Significantly, the sandy conglomerates at the top of anticline turning point have better quality, lower in-situ stress and higher structural position than those at the limbs,with the internal hydrocarbons most enriched, making them high-yield oil/gas layers. The exponential decline of fractures makes hydrocarbon accumulation difficult in the reservoirs at the limbs. Nonetheless, plane hydrocarbon distribution is more extensive at the gentle limb than the steep limb.

Genesis and microscopic characteristics of tight reservoirs in the Fengcheng Formation, at the southern margin of the Mahu Sag

The tight reservoirs of the Fengcheng Formation at the southern margin of the Mahu Sag have strong heterogeneity due to the diversity in their pore types, sizes, and structures. The microscopic characteristics of tight reservoirs and the mechanisms that generate them are of significance in identifying the distribution of high-quality reservoirs and in improving the prediction accuracy of sweet spots in tight oil reservoirs. In this paper, high-pressure mercury intrusion (HPMI) and nuclear magnetic resonance (NMR) experiments were carried out on samples from the tight reservoirs in the study area. These experimental results were combined with cluster analysis, fractal theory, and microscopic observations to qualitatively and quantitatively evaluate pore types, sizes, and structures. A classification scheme was established that divides the reservoir into four types, based on the microstructure characteristics of samples, and the genetic mechanisms that aided the development of reservoir microstructure were analyzed. The results show that the lower limit for the tight reservoir in the Fengcheng Formation is Φ of 3.5% and K of 0.03 mD. The pore throat size and distribution span gradually decrease from Type I, through Type II and Type III reservoirs to non-reservoirs, and the pore type also evolves from dominantly intergranular pores to intercrystalline pores. The structural trend shows a decrease in the ball-stick pore-throat system and an increase in the branch-like pore-throat system. The dual effects of sedimentation and diagenesis shape the microscopic characteristics of pores and throats. The sorting, roundness, and particle size of the original sediments determine the original physical properties of the reservoir. The diagenetic environment of ‘two alkalinity stages and one acidity stage’ influenced the evolution of pore type and size. Although the cementation of authigenic minerals in the early alkaline environment adversely affected reservoir properties, it also alleviated the damage of the later compaction to some extent. Dissolution in the mid-term acidic environment greatly improved the physical properties of this tight reservoir, making dissolution pores an important reservoir space. The late alkaline environment occurred after large-scale oil and gas accumulation. During this period, the cementation of authigenic minerals had a limited effect on the reservoir space occupied by crude oil. It had a more significant impact on the sand bodies not filled with oil, making them function as barriers.

Reservoir characteristics of Datta Formation (Early Jurassic), Marwat-Khisor Ranges, sub-Himalayas, Pakistan

The present work has been accomplished to carry out a detailed study of the characteristics of the Early Jurassic Datta Formation of Trans-Indus Ranges, Pakistan. The discovery of Saib well-1 (Gas and condensate discovery from Jurassic limestone) in the study basin takes an active interest in carrying out extensive exploration activities in the same basin. Jurassic rocks especially Datta Sandstone and Samana Suk Limestone are acting as good reservoirs. The study unit consists of variegated sandstone interbedded with siltstone, carbonaceous clay, and shale and coal stringer. For the current work, two stratigraphic sections (Pezu and Abbo Wanda) have been measured. To examine its sedimentology, depositional environment, diagenetic settings, and reservoir characteristics, a detailed study was conducted and various laboratory techniques have been utilized. About 95 rock samples from the bottom to the top of both sections were collected, and 50 rock samples have been selected for thin section analysis and were examined under a polarizing microscope to show their mineralogical composition, diagenesis, and their reservoir characteristics. XRD (X-ray diffraction), Cathodoluminescence (CL), SEM (Scanning electron microscope) with EDS (Energy-dispersive spectroscope), and Core plug porosity and permeability analysis have been used to interpret its chemical and mineralogical composition and its reservoir characteristics, respectively. Based on field observations and thin section analysis, four depositional facies and six lithofacies have been established. The sedimentary structures, depositional facies, and lithofacies indicate that Datta Formation was deposited in a deltaic environment. Compactions, cementation, fracturing and dissolution can greatly affect the quality of reservoir rock. Based on thin section and SEM analysis, large numbers of primary pores, fracture and secondary pores were observed and connectivity between the pores is good, and at some places, these pores were filled through the authigenic clay minerals like kaolinite, mixed layers illite/smectite and chlorite that influences the reservoir characteristics. Primary pores (thin section) and secondary pores (dissolution pores) and core plug porosity and permeability data (porosity 13.23%-26.89% and permeability 0.12 to 149 mD) shows that Datta Formation has a good reservoir quality.