Ce0.5Zr0.5O2 solid solution was successfully synthesized using cerium nitrate, zirconium nitrate, and urea as raw materials by the microwave irradiation method and characterized by X-ray diffraction, fluorescence spec...Ce0.5Zr0.5O2 solid solution was successfully synthesized using cerium nitrate, zirconium nitrate, and urea as raw materials by the microwave irradiation method and characterized by X-ray diffraction, fluorescence spectrum, transmission electron microscopy, and infrared spectrum. Its acid catalytic activity was evaluated in the esterification reaction of acetic acid and n-butyl alcohol. The results show that Ce0.5Zr0.5O2 solid solution has cubic fluorite structure, and its particle diameter is in the nanometer scale. As a sort of solid acid, it possesses a higher acid catalytic activity and can be easily separated from reaction liquids. It can be used for several times, and basically, its activity keeps constant. The proton acid sites and Lewis acid sites exist in the structure of Ce0.5Zr0.5O2 solid solution.展开更多
The rapid alkylation of methyl N-benzylidene glycinate with halides under microwave irradiation using solid-liquid phase transfer condition without solvent has been achieved wilhin only one minute. After hydrolysis of...The rapid alkylation of methyl N-benzylidene glycinate with halides under microwave irradiation using solid-liquid phase transfer condition without solvent has been achieved wilhin only one minute. After hydrolysis of alkylated products the corresponding α-amino acids were obtained in overall yield 43.6～62.5%.展开更多
A novel Pd electrocatalyst with flowerlike micro-nanostructures was synthesized by electrochemical deposition on a flexible graphene/polyimide（Gr/PI） composite membrane and characterized by scanning electron microsc...A novel Pd electrocatalyst with flowerlike micro-nanostructures was synthesized by electrochemical deposition on a flexible graphene/polyimide（Gr/PI） composite membrane and characterized by scanning electron microscopy（SEM）,X-ray diffraction（XRD）.The Pd micro-nanoparticles were prepared on a COOH-CNTs/PI membrane as a comparative sample.The XRD and SEM investigations for Pd electrodeposition demonstrate that the particle size of Gr/PI composite membrane is smaller than that of COOH-CNTs/PI membrane,while the uniform and dense distribution of Pd micro-nanoparticles on the Gr/PI composite membrane is greater than that on the COOH-CNTs/PI membrane.The electrocatalytic properties of Pd/Gr/PI and Pd/COOH-CNTs/PI catalysts for the oxidation of formic acid were investigated by cyclic voltammetry（CV） and chronoamperometry（CA）.It is found that the electrocatalytic activity and stability of Pd/Gr/PI are superior to those of Pd/COOH-CNTs/PI catalyst.This is because smaller metal particles and higher dense distribution desirably provide abundant catalytic sites and mean higher catalytic activity.Therefore,the Pd/Gr/PI catalyst has better catalytic performance for formic acid oxidation than the Pd/COOH-CNTs/PI catalyst.展开更多
3,6-Diarylidene-2,5-piperazinediones(2)and 3-alkylidene-6-arylidene-2,5-piperazfnediones (6)were synthesized from diacetyl-2,5-piperazinedione(1)under solid-liquid phase transfer catalytic conditions.2 could be easily...3,6-Diarylidene-2,5-piperazinediones(2)and 3-alkylidene-6-arylidene-2,5-piperazfnediones (6)were synthesized from diacetyl-2,5-piperazinedione(1)under solid-liquid phase transfer catalytic conditions.2 could be easily convered to a-amino acid by reducing with zinc powder and hydrolyzing with concentrated hydrochloric acid.The effect of different phase transfer catalysts and reaction con- ditions were studied.展开更多
Formic acid was used for the nitrate reduction as a reductant in the presence of Pd：Cu/γ-alumina catalysts. The surface characteristics of the bimetallic catalyst synthesized by wet impregnation were investigated by...Formic acid was used for the nitrate reduction as a reductant in the presence of Pd：Cu/γ-alumina catalysts. The surface characteristics of the bimetallic catalyst synthesized by wet impregnation were investigated by SEM, TEM-EDS. The metals were not distributed homogeneously on the surface of catalyst, although the total contents of both metals in particles agreed well with the theoretical values. Formic acid decomposition on the catalyst surface, its influence on solution pH and nitrate removal efficacy was investigated. The best removal of nitrate （50 ppm） was obtained under the condition of 0.75 g/L catalyst with Pd：Cu ratio （4：1） and two fold excess of formic acid. Formic acid decay patterns resembled those of nitrate removal, showing a linear relationship between kf （formic acid decay） and k （nitrate removal）. Negligible amount of ammonia was detected, and no nitrite was detected, possibly due to buffering effect of bicarbonate that is in situ produced by the decomposition of formic acid, and due to the sustained release of H2 gas.展开更多
Catalytic transfer hydroge nation(CTH)of furfural(FF)to furfu ryl alcohol(FFA)has received great intere st in recent years.He rein,Cu-Cs bimetallic supported catalyst,CuCs(2)-MCM,was developed for the CTH of FF to FFA...Catalytic transfer hydroge nation(CTH)of furfural(FF)to furfu ryl alcohol(FFA)has received great intere st in recent years.He rein,Cu-Cs bimetallic supported catalyst,CuCs(2)-MCM,was developed for the CTH of FF to FFA using formic as hydrogen donor.CuCs(2)-MCM achieved a 99.6%FFA yield at an optimized reaction conditions of 170℃,1 h.Cu species in CuCs(2)-MCM had dual functions in catalytically decomposing formic acid to generate hydrogen and hydrogenating FF to FFA.The doping of Cs made the size of Cu particles smaller and improved the dispersion of the Cu active sites.Impo rtantly,the Cs species played a favorable role in enhancing the hydrogenation activity as a promoter by adjusting the surface acidity of Cu species to an appropriate level.Correlation analysis showed that surface acidity is the primary factor to affect the catalytic activity of CuCs(2)-MCM.展开更多
基金This work was financially supported by the Teaching Reform Study Program of Ludong University (No.Y0715).
文摘Ce0.5Zr0.5O2 solid solution was successfully synthesized using cerium nitrate, zirconium nitrate, and urea as raw materials by the microwave irradiation method and characterized by X-ray diffraction, fluorescence spectrum, transmission electron microscopy, and infrared spectrum. Its acid catalytic activity was evaluated in the esterification reaction of acetic acid and n-butyl alcohol. The results show that Ce0.5Zr0.5O2 solid solution has cubic fluorite structure, and its particle diameter is in the nanometer scale. As a sort of solid acid, it possesses a higher acid catalytic activity and can be easily separated from reaction liquids. It can be used for several times, and basically, its activity keeps constant. The proton acid sites and Lewis acid sites exist in the structure of Ce0.5Zr0.5O2 solid solution.
文摘The rapid alkylation of methyl N-benzylidene glycinate with halides under microwave irradiation using solid-liquid phase transfer condition without solvent has been achieved wilhin only one minute. After hydrolysis of alkylated products the corresponding α-amino acids were obtained in overall yield 43.6～62.5%.
基金Project(51372106)supported by the National Natural Science Foundation of China
文摘A novel Pd electrocatalyst with flowerlike micro-nanostructures was synthesized by electrochemical deposition on a flexible graphene/polyimide（Gr/PI） composite membrane and characterized by scanning electron microscopy（SEM）,X-ray diffraction（XRD）.The Pd micro-nanoparticles were prepared on a COOH-CNTs/PI membrane as a comparative sample.The XRD and SEM investigations for Pd electrodeposition demonstrate that the particle size of Gr/PI composite membrane is smaller than that of COOH-CNTs/PI membrane,while the uniform and dense distribution of Pd micro-nanoparticles on the Gr/PI composite membrane is greater than that on the COOH-CNTs/PI membrane.The electrocatalytic properties of Pd/Gr/PI and Pd/COOH-CNTs/PI catalysts for the oxidation of formic acid were investigated by cyclic voltammetry（CV） and chronoamperometry（CA）.It is found that the electrocatalytic activity and stability of Pd/Gr/PI are superior to those of Pd/COOH-CNTs/PI catalyst.This is because smaller metal particles and higher dense distribution desirably provide abundant catalytic sites and mean higher catalytic activity.Therefore,the Pd/Gr/PI catalyst has better catalytic performance for formic acid oxidation than the Pd/COOH-CNTs/PI catalyst.
基金Project supported by the National Natural Science Foundation of China and Modern Analysis Centre of Nanjing University.
文摘3,6-Diarylidene-2,5-piperazinediones(2)and 3-alkylidene-6-arylidene-2,5-piperazfnediones (6)were synthesized from diacetyl-2,5-piperazinedione(1)under solid-liquid phase transfer catalytic conditions.2 could be easily convered to a-amino acid by reducing with zinc powder and hydrolyzing with concentrated hydrochloric acid.The effect of different phase transfer catalysts and reaction con- ditions were studied.
基金supported by the Korea Foundation for the Advancement of Science and Creativity under Project URP (2009-04-219)by (in part) Sunchon National University Research Fund in 2012
文摘Formic acid was used for the nitrate reduction as a reductant in the presence of Pd：Cu/γ-alumina catalysts. The surface characteristics of the bimetallic catalyst synthesized by wet impregnation were investigated by SEM, TEM-EDS. The metals were not distributed homogeneously on the surface of catalyst, although the total contents of both metals in particles agreed well with the theoretical values. Formic acid decomposition on the catalyst surface, its influence on solution pH and nitrate removal efficacy was investigated. The best removal of nitrate （50 ppm） was obtained under the condition of 0.75 g/L catalyst with Pd：Cu ratio （4：1） and two fold excess of formic acid. Formic acid decay patterns resembled those of nitrate removal, showing a linear relationship between kf （formic acid decay） and k （nitrate removal）. Negligible amount of ammonia was detected, and no nitrite was detected, possibly due to buffering effect of bicarbonate that is in situ produced by the decomposition of formic acid, and due to the sustained release of H2 gas.
基金supported by the National Natural Science Fund of China(Nos.21776234,21978246)。
文摘Catalytic transfer hydroge nation(CTH)of furfural(FF)to furfu ryl alcohol(FFA)has received great intere st in recent years.He rein,Cu-Cs bimetallic supported catalyst,CuCs(2)-MCM,was developed for the CTH of FF to FFA using formic as hydrogen donor.CuCs(2)-MCM achieved a 99.6%FFA yield at an optimized reaction conditions of 170℃,1 h.Cu species in CuCs(2)-MCM had dual functions in catalytically decomposing formic acid to generate hydrogen and hydrogenating FF to FFA.The doping of Cs made the size of Cu particles smaller and improved the dispersion of the Cu active sites.Impo rtantly,the Cs species played a favorable role in enhancing the hydrogenation activity as a promoter by adjusting the surface acidity of Cu species to an appropriate level.Correlation analysis showed that surface acidity is the primary factor to affect the catalytic activity of CuCs(2)-MCM.
