Efficient slope reliability and sensitivity analysis using quantile-based first-order second-moment method

This paper introduces a novel approach for parameter sensitivity evaluation and efficient slope reliability analysis based on quantile-based first-order second-moment method(QFOSM).The core principles of the QFOSM are elucidated geometrically from the perspective of expanding ellipsoids.Based on this geometric interpretation,the QFOSM is further extended to estimate sensitivity indices and assess the significance of various uncertain parameters involved in the slope system.The proposed method has the advantage of computational simplicity,akin to the conventional first-order second-moment method(FOSM),while providing estimation accuracy close to that of the first-order reliability method(FORM).Its performance is demonstrated with a numerical example and three slope examples.The results show that the proposed method can efficiently estimate the slope reliability and simultaneously evaluate the sensitivity of the uncertain parameters.The proposed method does not involve complex optimization or iteration required by the FORM.It can provide a valuable complement to the existing approximate reliability analysis methods,offering rapid sensitivity evaluation and slope reliability analysis.

Finite Element Simulation of Flexible Roll Forming with Supplemented Material Data and the Experimental Verification

Flexible roll forming is a promising manufacturing method for the production of variable cross section products. Considering the large plastic strain in this forming process which is much larger than that of uniform deformation phase of uniaxial tensile test, the widely adopted method of simulating the forming processes with non-supplemented material data from uniaxial tensile test will certainly lead to large error. To reduce this error, the material data is supplemented based on three constitutive models. Then a finite element model of a six passes flexible roll forming process is established based on the supplemented material data and the original material data from the uniaxial tensile test. The flexible roll forming experiment of a B pillar reinforcing plate is carried out to verify the proposed method. Final cross section shapes of the experimental and the simulated results are compared. It is shown that the simulation calculated with supplemented material data based on Swift model agrees well with the experimental results, while the simulation based on original material data could not predict the actual deformation accurately. The results indicate that this material supplement method is reliable and indispensible, and the simulation model can well reflect the real metal forming process. Detailed analysis of the distribution and history of plastic strain at different positions are performed. A new material data supplement method is proposed to tackle the problem which is ignored in other roll forming simulations, and thus the forming process simulation accuracy can be greatly improved.

Forming Mechanism of Gaseous Defect in Ti-48Al-2Cr-2Nb Exhaust Valves Formed with Permanent Mold Centrifugal Casting Method

A method combining theoretical analysis with experiment is adopted and the flowing process of Ti-48A1-2Cr-2Nb alloy melt poured in a permanent mould during the centrifugal casting process has been analyzed. A mathematical model of the filling process is established and the forming mechanism of internal gaseous defect is summarized. The results of calculation show that the melt fills the mould with varying cross-section area and inclined angle. The filling speed of the cross-section is a function of filling time. The cross-section area is directly proportional to the filling speed and the inclined angle is inversely proportional to the filling speed at a given rotating speed of the platform. Both of them changes more obvious near the mould entrance. The gaseous defect can be formed in several ways and the centrifugal field has an important influence on the formation of the defect. In addition, the filling process in centrifugal field has been verified by wax experiments and the theoretical analysis are consistent with experimental results.

Simulation of bulk metal forming processes using one-step finite element approach based on deformation theory of plasticity

The bulk metal forming processes were simulated by using a one-step finite element(FE)approach based on deformation theory of plasticity,which enables rapid prediction of final workpiece configurations and stress/strain distributions.This approach was implemented to minimize the approximated plastic potential energy derived from the total plastic work and the equivalent external work in static equilibrium,for incompressibly rigid-plastic materials,by FE calculation based on the extremum work principle.The one-step forward simulations of compression and rolling processes were presented as examples,and the results were compared with those obtained by classical incremental FE simulation to verify the feasibility and validity of the proposed method.

EFFECT OF VELOCITY ON DUCTILITY UNDER HIGH VELOCITY FORMING

The ring expansion procedures over various forming velocities are calculated with ANSYS software in order to show the effect of forming velocity on ductility of rate insensitive materials. Ring expansion procedures are simplified to one-dimensional tension by constraining the radial deformation, with element birth and death method, fracture problem of circular ring are considered. The calculated results show that for insensitive materials of 1060 aluminum and 3A21 aluminum alloy, fracture strain increases corresponding to the increase of forming velocity. This trend agrees well with experimental results, and indicates inertia is the key factor to affect ductility; With element birth and death methods, fracture problems can be solved effectively. Experimental studies on formability of tubular workpieces are also conducted, experimental results show that the formability of 1060 aluminum and 3A21 aluminum alloy under electromagnetic forming is higher than that under quasistatic forming, according to the characteristics of electromagnetic forming, the forming limit diasrams of the two materials tube are also built respectively, this is very important to promote the development of electromagnetic forming and guide the engineering practices.

Effect of 2D spatial variability on slope reliability: A simplified FORM analysis

To meet the high demand for reliability based design of slopes, we present in this paper a simplified HLRF(Hasofere Linde Rackwitze Fiessler) iterative algorithm for first-order reliability method(FORM). It is simply formulated in x-space and requires neither transformation of correlated random variables nor optimization tools. The solution can be easily improved by iteratively adjusting the step length. The algorithm is particularly useful to practicing engineers for geotechnical reliability analysis where standalone(deterministic) numerical packages are used. Based on the proposed algorithm and through direct perturbation analysis of random variables, we conducted a case study of earth slope reliability with complete consideration of soil uncertainty and spatial variability.

Effects of porosity and pore size on the compressive properties of closed-cell Mg alloy foam

In our current work,AZ31 magnesium alloy foams with closed-cell were successfully fabricated by melt foaming method using Ca and CaCO3 as thickening and blowing agent,respectively.The influences of porosity and pore size on the quasi-static compressive properties of the foams were systematically investigated.The results showed that the yield strength,energy absorption capacity and ideality energy absorption efficiency were decreased with the increase in porosity.However,specimens with porosities of 60%,65%and 70%possessed similar total energy absorption capacity and ideality energy absorption efficiency.Meanwhile,experimental results showed that mean plateau strength of the foams was increased first and then decreased with increase in mean pore size.In addition,energy absorption capacities were almost the same in the initial stage,while the differences were obvious in the middle stage.From the engineering point of view,the specimens with mean pore size of 1.5 mm possess good combination of mean plateau strength and energy absorption characteristics under the present conditions.

RELIABILITY ANALYSIS OF FRP LAMINATED PLATES WITH CONSIDERATION OF BOTH INITIAL IMPERFECTION AND FAILURE SEQUENCE

A probabilistic progressive failure analyzing method is applied to estimating the reliability of a simply supported laminated composite plate with an initial imperfection under bi-axial compression load. The initial imperfection and the strength parameters are considered as random variables. Ply-level failure probability is evaluated by the first order reliability method (FORM) together with the Tsai-Wu strength criterion and Tan criterion. Current stresses in the laminated structure are calculated by the classical lamination theory with the stiffness modified based on the last step ply failure. Probabilistically dominant ply-level failure sequences leading to overall system failure are identified, based on which the system failure probability is estimated. A numerical example is presented to demonstrate the methodology proposed. Through parameter studies it is shown that the deviation of the initial imperfection and some of the strength parameters largely influence the system reliability.

Flutter Control of a Two-dimensional Airfoil Using Wash-out Filter Technique

The wash-out filter （WF） technique is used to control the flutter of a two dimensional airfoil with cubic non-linearity in incompressible flow. Firstly, Hopf bifurcation theory is used to determine the point at which the nonlinear controller is introduced. The system is then transformed into Jordan canonical form, based on analysis of linearized eigenvalues of the system. Secondly, for the introduced WF controller, the linear control gain is determined according to Hopf bifurcation condition. The sym- bolic computing program of normal form direct method （NFDM） is also used to obtain the normal form of the controlled system. The non-linear control gain can be determined based on the relation of the type of bifurcation and the parameters of the normal form, to transform sub-critical Hopf bifurcation to be su- per-critical one. Lastly, numerical simulations are used to certify the validity of theoretical analysis, in which the amplitude of flutter or limit cycle of the controlled system is reduced greatly, comparing to the original system.

Probabilistic analysis of ultimate seismic bearing capacity of strip foundations

This paper presents a reliability analysis of the pseudo-static seismic bearing capacity of a strip foundation using the limit equilibrium theory. The first-order reliability method(FORM) is employed to calculate the reliability index. The response surface methodology(RSM) is used to assess the Hasofer e Lind reliability index and then it is optimized using a genetic algorithm(GA). The random variables used are the soil shear strength parameters and the seismic coefficients(khand kv). Two assumptions(normal and non-normal distribution) are used for the random variables. The assumption of uncorrelated variables was found to be conservative in comparison to that of negatively correlated soil shear strength parameters. The assumption of non-normal distribution for the random variables can induce a negative effect on the reliability index of the practical range of the seismic bearing capacity.

NONEXISTENCE OF POSITIVE SOLUTIONS FOR A SEMI-LINEAR EQUATION INVOLVING THE FRACTIONAL LAPLACIAN IN R^N

In this paper, we consider the semilinear equation involving the fractional Laplacian in the Euclidian space R^n：（-△）^α/2u（x） ： f（xn）u^p（x）, x ∈R^n（0.1）in the subcritical case with 1〈 p〈n＋a/n-a.Instead of carrying out direct investigations on pseudo-differential equation （0.1）, we first seek its equivalent form in an integral equation as below：u（x）=∫R^nG∞（x, y） f（yn） u^p（y）dy,where G∞（x, y） is the Green＇s function associated with the fractional Laplacian in R^n. Employing the method of moving planes in integral forms, we are able to derive the nonexistence of positive solutions for （0.2） in the subcritical case. Thanks to the equivalence, same con- clusion is true for （0.1）.

CLASSIFICATION OF POSITIVE SOLUTIONS TO ASYSTEM OF HARDY-SOBOLEV TYPE EQUATIONS

In this paper, we are concerned with the following Hardy-Sobolev type system{(-?)^(α/2) u(x) =v^q(x)/|y|^(t_2) (-?)α/2 v(x) =u^p(x)/|y|^(t_1),x =(y, z) ∈(R ~k\{0}) × R^(n-k),(0.1)where 0 < α < n, 0 < t_1, t_2 < min{α, k}, and 1 < p ≤ τ_1 :=(n+α-2t_1)/( n-α), 1 < q ≤ τ_2 :=(n+α-2 t_2)/( n-α).We first establish the equivalence of classical and weak solutions between PDE system(0.1)and the following integral equations(IE) system{u(x) =∫_( R^n) G_α(x, ξ)v^q(ξ)/|η|t^2 dξ v(x) =∫_(R^n) G_α(x, ξ)(u^p(ξ))/|η|^(t_1) dξ,(0.2)where Gα(x, ξ) =(c n,α)/(|x-ξ|^(n-α))is the Green's function of(-?)^(α/2) in R^n. Then, by the method of moving planes in the integral forms, in the critical case p = τ_1 and q = τ_2, we prove that each pair of nonnegative solutions(u, v) of(0.1) is radially symmetric and monotone decreasing about the origin in R^k and some point z0 in R^(n-k). In the subcritical case (n-t_1)/(p+1)+(n-t_2)/(q+1)> n-α,1 < p ≤ τ_1 and 1 < q ≤ τ_2, we derive the nonexistence of nontrivial nonnegative solutions for(0.1).

Flexural and eigen-buckling analysis of steel-concrete partially composite plates using weak form quadrature element method

Flexural and eigen-buckling analyses for rectangular steel-concrete partially composite plates(PCPs)with interlayer slip under simply supported and clamped boundary conditions are conducted using the weak form quadrature element method(QEM).Both of the derivatives and integrals in the variational description of a problem to be solved are directly evaluated by the aid of identical numerical interpolation points in the weak form QEM.The effectiveness of the presented numerical model is validated by comparing numerical results of the weak form QEM with those from FEM or analytic solution.It can be observed that only one quadrature element is fully competent for flexural and eigen-buckling analysis of a rectangular partially composite plate with shear connection stiffness commonly used.The numerical integration order of quadrature element can be adjusted neatly to meet the convergence requirement.The quadrature element model presented here is an effective and promising tool for further analysis of steel-concrete PCPs under more general circumstances.Parametric studies on the shear connection stiffness and length-width ratio of the plate are also presented.It is shown that the flexural deflections and the critical buckling loads of PCPs are significantly affected by the shear connection stiffness when its value is within a certain range.

Dynamics of Quantum State and Effective Hamiltonian with Vector Differential Form of Motion Method

Effective Hamiltonians in periodically driven systems have received widespread attention for realization of novel quantum phases, non-equilibrium phase transition, and Majorana mode. Recently, the study of effective Hamiltonian using various methods has gained great interest. We consider a vector differential equation of motion to derive the effective Hamiltonian for any periodically driven two-level system, and the dynamics of the spin vector are an evolution under the Bloch sphere. Here, we investigate the properties of this equation and show that a sudden change of the effective Hamiltonian is expected. Furthermore, we present several exact relations, whose expressions are independent of the different starting points. Moreover, we deduce the effective Hamiltonian from the high-frequency limit, which approximately equals the results in previous studies. Our results show that the vector differential equation of motion is not affected by a convergence problem, and thus, can be used to numerically investigate the effective models in any periodic modulating system. Finally, we anticipate that the proposed method can be applied to experimental platforms that require time-periodic modulation, such as ultracold atoms and optical lattices.

Symmetry Classification of Partial Differential Equations Based on Wu's Method

Lie algorithm combined with differential form Wu's method is used to complete the symmetry classification of partial differential equations(PDEs)containing arbitrary parameter.This process can be reduced to solve a large system of determining equations,which seems rather difficult to solve,then the differential form Wu's method is used to decompose the determining equations into a series of equations,which are easy to solve.To illustrate the usefulness of this method,we apply it to some test problems,and the results show the performance of the present work.

Reliability‑Based Analysis of a Caisson Breakwater with the Application of Bayesian Inference

Caisson breakwaters are mainly constructed in deep waters to protect an area against waves.These breakwaters are con-ventionally designed based on the concept of the safety factor.However,the wave loads and resistance of structures have epistemic or aleatory uncertainties.Furthermore,sliding failure is one of the most important failure modes of caisson breakwaters.In most previous studies,for assessment purposes,uncertainties,such as wave and wave period variation,were ignored.Therefore,in this study,Bayesian reliability analysis is implemented to assess the failure probability of the sliding of Tombak port breakwater in the Persian Gulf.The mean and standard deviations were taken as random variables to consider dismissed uncertainties.For this purpose,the frst-order reliability method(FORM)and the frst principal curvature cor-rection in FORM are used to calculate the reliability index.The performances of these methods are verifed by importance sampling through Monte Carlo simulation(MCS).In addition,the reliability index sensitivities of each random variable are calculated to evaluate the importance of diferent random variables while calculating the caisson sliding.The results show that the reliability index is most sensitive to the coefcients of friction,wave height,and caisson weight(or concrete density).The sensitivity of the failure probability of each of the random variables and their uncertainties are calculated by the derivative method.Finally,the Bayesian regression is implemented to predict the statistical properties of breakwater sliding with non-informative priors,which are compared to Goda’s formulation,used in breakwater design standards.The analysis shows that the model posterior for the sliding of a caisson breakwater has a mean and standard deviation of 0.039 and 0.022,respectively.A normal quantile analysis and residual analysis are also performed to evaluate the correctness of the model responses.

An Alternative Algorithm for the Symmetry Classification of Ordinary Differential Equations

This is the first paper on symmetry classification for ordinary differential equations(ODEs)based on Wu’s method.We carry out symmetry classification of two ODEs,named the generalizations of the Kummer-Schwarz equations which involving arbitrary function.First,Lie algorithm is used to give the determining equations of symmetry for the given equations,which involving arbitrary functions.Next,differential form Wu’s method is used to decompose determining equations into a union of a series of zero sets of differential characteristic sets,which are easy to be solved relatively.Each branch of the decomposition yields a class of symmetries and associated parameters.The algorithm makes the classification become direct and systematic.Yuri Dimitrov Bozhkov,and Pammela Ramos da Conceição have used the Lie algorithm to give the symmetry classifications of the equations talked in this paper in 2020.From this paper,we can find that the differential form Wu’s method for symmetry classification of ODEs with arbitrary function(parameter)is effective,and is an alternative method.

APPLICATION OF INTEGRATION ALGORITHEMS FOR ELASTO-PLASTICITY CONSTITUTIVE MODEL FOR ANISOTROPIC SHEET MATERIALS

Two algorithms of computing stress increment by using the elasto-plasticity constitutive model are firstly formulated, which are the Euler integration method and the radial return method. Hill＇48 anisotropic yield criterion is used. The Euler integration method can not obtain more accurate computation of the stress increment as the radial return method unless enough subintervals are taken,by which the Euler integration method will take excessive computing time. Without docreasing any accuracy, the radial return method can save much time. Finally, a square cup deep drawing from NUMISHEET＇93 benchmarks is simulated with a self-developed code SheetForrn in order to investigate the accuracy and efficiency of the radial return method.

Non-coupled charge explosion and geo-mechanical dynamics

The non-coupled charge explosion and geo-mechanical dynamics problem in real air condition is studied in this paper. It analyzes and calculates the problem by using the real air state equations. Through researching on the non-coupled charge rock bench blasting with big clearance of air, its result indicates that the borehole wall reflection overpressure is far higher than strength of rock, but much lower than detonation front pressure of the charge. So non-coupled charge explosion blasting engineering is very successful. Furthermore, it introduces the method of shaft forming by blasting once and the new tube room technology. And the non-coupled charge explosion is used successfully in the method of shaft forming by blasting once. As it drills and blasts in the top and removes the broken rock from the bottom tunnel, it increases the construction efficiency significantly. This paper has important reference on the improvement of the large-span underground engineering construction.

UBM STUDY ON DOUBLE-DIE IRONING PROCESS

The double-die ironing process is studied by means of UBM. The formulas of deformation load.contact stress on die surface, and tensile stress which acts on workpiece is obtained. Taking account of dirnensional accuracy, a new critical condition of limit reduction in cross section area is put forward for the flrst time. The test experiment indicats that results of theoretical analysis well accord with the actual conditions.[0]