Surface engineering of magnesium alloys requires adequate strategies, processes and materials permitting corrosion protection. Liquid formulations containing corrosion inhibitors often are to be optimized according to...Surface engineering of magnesium alloys requires adequate strategies, processes and materials permitting corrosion protection. Liquid formulations containing corrosion inhibitors often are to be optimized according to the demands of the respective substrate and following the service conditions during its application. As an interdisciplinary approach, a combination of several techniques for instantly monitoring or elaborately analyzing the surface state of magnesium was accomplished in order to characterize the performance of new adsorbing sustainable amphiphilic polymers which recently were developed to facilitate a multi-metal corrosion protection approach. The application of established techniques like Contact Angle measurements and X-ray Photoelectron Spectroscopy investigations was supplemented by introducing related and yet faster online-capable and larger-scale techniques like Aerosol Wetting Test and Optically Stimulated Electron Emission. Moreover, an inexpensive setup was configured for scaling the inset and the extent of degradation processes which occur at local electrochemical circuits and lead to hydrogen bubble formation. Using these analytical tools, changes of the surface state of emeried AM50 samples were investigated. Even in contact with water, being a moderate corrosive medium, the online techniques facilitated detecting surface degradation of the unprotected magnesium alloy within some seconds. In contrast, following contact with a 1 weight% formulation of a polymeric corrosion inhibitor, surface monitoring indicated a delay of the onset of degradation processes by approximately two orders of magnitude in time. Mainly based on the spectroscopic investigations, the corrosion inhibiting effects of the investigated polymer are attributed to the adsorption of a primary polymer layer with a thickness of a few nanometers which occurs within some seconds. Immersion of magnesium for several hours brings up a protective film with around ten nanometers thickness.展开更多
基金Borders(Ciencia sem Fronteiras,proc.L.M.G.Goncalves 88888.021780/2013-00,L.C.Sanchez 88888.021800/2013-00 and S.Stamboroski 88888.020610/2013-00)Coordination of Improvement of Higher Education Personnel(CAPES-Brazil)and Consejo Nacional para Investigaciones Científicas y Tecnologicas de Costa Rica.(CONICIT)for the funding+1 种基金the German Federal Ministry of Economics and Technology(BMWi)under the ZIM programme(Zentrales Innovationsprogramm Mittelstand-ZIM)the“KABA”project(funding reference KF2139502 HA9)carried out with Straetmans High TAC GmbH
文摘Surface engineering of magnesium alloys requires adequate strategies, processes and materials permitting corrosion protection. Liquid formulations containing corrosion inhibitors often are to be optimized according to the demands of the respective substrate and following the service conditions during its application. As an interdisciplinary approach, a combination of several techniques for instantly monitoring or elaborately analyzing the surface state of magnesium was accomplished in order to characterize the performance of new adsorbing sustainable amphiphilic polymers which recently were developed to facilitate a multi-metal corrosion protection approach. The application of established techniques like Contact Angle measurements and X-ray Photoelectron Spectroscopy investigations was supplemented by introducing related and yet faster online-capable and larger-scale techniques like Aerosol Wetting Test and Optically Stimulated Electron Emission. Moreover, an inexpensive setup was configured for scaling the inset and the extent of degradation processes which occur at local electrochemical circuits and lead to hydrogen bubble formation. Using these analytical tools, changes of the surface state of emeried AM50 samples were investigated. Even in contact with water, being a moderate corrosive medium, the online techniques facilitated detecting surface degradation of the unprotected magnesium alloy within some seconds. In contrast, following contact with a 1 weight% formulation of a polymeric corrosion inhibitor, surface monitoring indicated a delay of the onset of degradation processes by approximately two orders of magnitude in time. Mainly based on the spectroscopic investigations, the corrosion inhibiting effects of the investigated polymer are attributed to the adsorption of a primary polymer layer with a thickness of a few nanometers which occurs within some seconds. Immersion of magnesium for several hours brings up a protective film with around ten nanometers thickness.
