Four-dimensional Visual Analysis and Design Optimization of LC Filters at DC Side of Single-phase Diode Rectifiers

整流滤波电路用途广泛但其优化设计不易得到全局最优解。对单相桥式不控整流电路的LC滤波器进行深分析，得到输出平均电压、浪涌电流、振荡电压、谐波衰减比和体积等的表达式f（L，C,R），并在Matlab环境下用四维数据场展现其全局的值域分布，按需用不同交集来表征所须兼顾的多个设计目标，逐步导入约束条件来进行优化。实验结果表明，在滤波器外特性基本相同的前提下，基于数据场可视化算法的优化设计达到了体积缩小1／4的效果。

Coupling Ensemble Kalman Filter with Four-dimensional Variational Data Assimilation

This study examines the performance of coupling the deterministic four-dimensional variational assimilation system （4DVAR） with an ensemble Kalman filter （EnKF） to produce a superior hybrid approach for data assimilation. The coupled assimilation scheme （E4DVAR） benefits from using the state-dependent uncertainty provided by EnKF while taking advantage of 4DVAR in preventing filter divergence： the 4DVAR analysis produces posterior maximum likelihood solutions through minimization of a cost function about which the ensemble perturbations are transformed, and the resulting ensemble analysis can be propagated forward both for the next assimilation cycle and as a basis for ensemble forecasting. The feasibility and effectiveness of this coupled approach are demonstrated in an idealized model with simulated observations. It is found that the E4DVAR is capable of outperforming both 4DVAR and the EnKF under both perfect- and imperfect-model scenarios. The performance of the coupled scheme is also less sensitive to either the ensemble size or the assimilation window length than those for standard EnKF or 4DVAR implementations.

Testing a Four-Dimensional Variational Data Assimilation Method Using an Improved Intermediate Coupled Model for ENSO Analysis and Prediction

A four-dimensional variational （4D-Var） data assimilation method is implemented in an improved intermediate coupled model （ICM） of the tropical Pacific. A twin experiment is designed to evaluate the impact of the 4D-Var data assimilation algorithm on ENSO analysis and prediction based on the ICM. The model error is assumed to arise only from the parameter uncertainty. The ＂observation＂ of the SST anomaly, which is sampled from a ＂truth＂ model simulation that takes default parameter values and has Gaussian noise added, is directly assimilated into the assimilation model with its parameters set erroneously. Results show that 4D-Var effectively reduces the error of ENSO analysis and therefore improves the prediction skill of ENSO events compared with the non-assimilation case. These results provide a promising way for the ICM to achieve better real-time ENSO prediction.

Four-dimensional flow magnetic resonance imaging incirrhosis

Since its introduction in the 1970’s,magnetic resonance imaging(MRI)has become a standard imaging modality.With its broad and standardized application,it is firmly established in the clinical routine and an essential element in cardiovascular and abdominal imaging.In addition to sonography and computer tomography,MRI is a valuable tool for diagnosing cardiovascular and abdominal diseases,for determining disease severity,and for assessing therapeutic success.MRI techniques have improved over the last few decades,revealing not just morphologic information,but functional information about perfusion,diffusion and hemodynamics as well.Four-dimensional(4D)flow MRI,a time-resolved phase contrast-MRI with three-dimensional(3D)anatomic coverage and velocity encoding along all three flow directions has been used to comprehensively assess complex cardiovascular hemodynamics in multiple regions of the body.The technique enables visualization of 3D blood flow patterns and retrospective quantification of blood flow parameters in a region of interest.Over the last few years,4D flow MRI has been increasingly performed in the abdominal region.By applying different acceleration techniques,taking 4D flow MRI measurements has dropped to a reasonable scanning time of 8 to 12 min.These new developments have encouraged a growing number of patient studies in the literature validating the technique’s potential for enhanced evaluation of blood flow parameters within the liver’s complex vascular system.The purpose of this review article is to broaden our understanding of 4D flow MRI for the assessment of liver hemodynamics by providing insights into acquisition,data analysis,visualization and quantification.Furthermore,in this article we highlight its development,focussing on the clinical application of the technique.

Four-Dimensional Variational Data Assimilation Experiments for a Heavy Rain Case During the 2002 IOP in China

A heavy rainfall event along the mei-yu front during 22-23 June 2002 was chosen for this study. To assess the impact of the routine and additional IOP (intensive observation period) radiosonde observations on the mesoscale heavy rainfall forecast, a series of four-dimensional variational (4DVAR) data assimilation and model simulation experiments was conducted using nonhydrostatic mesoscale model MM5 and the MM5 4DVAR system. The effects of the intensive observations in the different areas on the heavy rainfall forecast were also investigated. The results showed that improvement of the forecast skill for mesoscale heavy rainfall intensity was possible from the assimilation of the IOP radiosonde observations. However, the impact of the IOP observations on the forecast of the rainfall pattern was not significant. Initial conditions obtained through the 4DVAR experiments with a 12-h assimilation window were capable of improving the 24-h forecast. The simulated results after the assimilation showed that it would be best to perform the intensive radiosonde observations in the upstream of the rainfall area and in the moisture passageway area at the same time. Initial conditions created by the 4DVAR led to the low-level moisture convergence over the rainfall area, enhanced frontogenesis and upward motion within the mei-yu front, and intensified middle- and high-level unstable stratification in front of the mei-yu front. Consequently, the heavy rainfall forecast was improved.

Generating one-,two-,three-and four-scroll attractors from a novel four-dimensional smooth autonomous chaotic system

A new four-dimensional quadratic smooth autonomous chaotic system is presented in this paper, which can exhibit periodic orbit and chaos under the conditions on the system parameters. Importantly, the system can generate one-, two-, three- and four-scroll chaotic attractors with appropriate choices of parameters. Interestingly, all the attractors are generated only by changing a single parameter. The dynamic analysis approach in the paper involves time series, phase portraits, Poincare maps, a bifurcation diagram, and Lyapunov exponents, to investigate some basic dynamical behaviours of the proposed four-dimensional system.

Novel four-dimensional autonomous chaotic system generating one-,two-,three- and four-wing attractors

In this paper, we propose a novel four-dimensional autonomous chaotic system. Of particular interest is that this novel system can generate one-, two, three- and four-wing chaotic attractors with the variation of a single parameter, and the multi-wing type of the chaotic attractors can be displayed in all directions. The system is simple with a large positive Lyapunov exponent and can exhibit some interesting and complicated dynamical behaviours. Basic dynamical properties of the four-dimensional chaotic system, such as equilibrium points, the Poincare map, the bifurcation diagram and the Lyapunov exponents are investigated by using either theoretical analysis or numerical method. Finally, a circuit is designed for the implementation of the multi-wing chaotic attractors. The electronic workbench observations axe in good agreement with the numerical simulation results.

Automatic three-dimensional reconstruction based on four-view stereo vision using checkerboard pattern

An automatic three-dimensional(3D) reconstruction method based on four-view stereo vision using checkerboard pattern is presented. Mismatches easily exist in traditional binocular stereo matching due to the repeatable or similar features of binocular images. In order to reduce the probability of mismatching and improve the measure precision, a four-camera measurement system which can add extra matching constraints and offer multiple measurements is applied in this work. Moreover, a series of different checkerboard patterns are projected onto the object to obtain dense feature points and remove mismatched points. Finally, the 3D model is generated by performing Delaunay triangulation and texture mapping on the point cloud obtained by four-view matching. This method was tested on the 3D reconstruction of a terracotta soldier sculpture and the Buddhas in the Mogao Grottoes. Their point clouds without mismatched points were obtained and less processing time was consumed in most cases relative to binocular matching. These good reconstructed models show the effectiveness of the method.

Study on eigenvalue space of hyperchaotic canonical four-dimensional Chua's circuit

The eigenvalue space of the canonical four-dimensional Chua＇s circuit which can realize every eigenvalue for fourdimensional system is studied in this paper. First, the analytical relations between the circuit parameters and the eigenvalues of the system are established, and therefore all the circuit parameters can be determined explicitly by any given set of eigenvalues. Then, the eigenvalue space of the circuit is investigated in two cases by the nonlinear elements used. According to the types of the eigenvalues, some novel hyperchaotic attractors are presented. Further, the dynamic behaviours of the circuit are studied by the bifurcation diagrams and the Lyapunov spectra of the eigenvalues.

Rainfall Assimilation Using a New Four-Dimensional Variational Method:A Single-Point Observation Experiment

Accurate forecast of rainstorms associated with the mei-yu front has been an important issue for the Chinese economy and society. In July 1998 a heavy rainstorm hit the Yangzi River valley and received widespread attention from the public because it caused catastrophic damage in China. Several numerical studies have shown that many forecast models, including Pennsylvania State University National Center for Atmospheric Research’s fifth-generation mesoscale model （MM5）, failed to simulate the heavy precipitation over the Yangzi River valley. This study demonstrates that with the optimal initial conditions from the dimension-reduced projection four-dimensional variational data assimilation （DRP-4DVar） system, MM5 can successfully reproduce these observed rainfall amounts and can capture many important mesoscale features, including the southwestward shear line and the low-level jet stream. The study also indicates that the failure of previous forecasts can be mainly attributed to the lack of mesoscale details in the initial conditions of the models.

The Solution to the Dark Energy Mystery in the Universe of Four Distance Dimensions

This study is a continuation of the solution to the dark matter mystery in the earlier study. In that study, the theoretical four-dimensional mass generates similar galaxy rotations as were measured. This proves that the theory of four-dimensional mass is correct, especially as all the calculations are basic mechanics and easy to understand. Most of the mass and energy in the Universe is unknown. The common knowledge is that the ordinary mass is only about 5%, the dark matter that rotates the galaxies comprises 26%, and dark energy that expands the Universe at an accelerating speed is 69%. This study solves the mystery of dark energy by using the structure of the four-dimensional Universe. The theory of the Universe expanding at an accelerating speed has been based on the redshift measurements, in which the redshift of light from distant galaxies increases at an accelerating rate. Therefore, it has been inferred that the whole Universe expands at an accelerating speed. In this study, the model of the Universe is the surface volume of the four-dimensional spherical Universe. This type of structure of the Universe creates the same kind of an accelerating redshift increase which has been measured. In order to prove this theory, the model of the surface volume of the four-dimensional Universe was constructed, the equation of the redshift caused by this Universe was solved, and the theoretical equation was shown to be the same as the measured redshift in the Universe. The measured redshift in the Universe was obtained from the derivative of the model of the expanding Universe. A similar model of the Universe has been published by NASA. The four-dimensional model of the Universe in this study yielded the Universe that was found to have decelerating expansion at this point of time, and a Big Bang that was not very big.

On a Hypothetical Vector Field Associated with the Classic Electromagnetic Wave in a Space of Four Dimensions

In two previous papers [1] and [2], a structure for vector products in n dimensions was presented, and at the same time it was possible to propose the existence of a vector analogous to the curl of a vector field, for a space of four dimensions. In continuation of these works, the objective is to develop, through dimensional analogy, the idea of a hypothetical vector field, associated with the classical electromagnetic wave. This hypothetical field has a possible mathematical existence only when considering a space of four dimensions. The properties of the electromagnetic wave are preserved and equations with mathematical forms analogous to those of Maxwell’s equations are presented.

Local Dynamics of a New Four-Dimensional Quadratic Autonomous System

In this manuscript, Local dynamic behaviors including stability and Hopf bifurcation of a new four-dimensional quadratic autonomous system are studied both analytically and numerically. Determining conditions of equilibrium points on different parameters are derived. Next, the stability conditions are investigated by using Routh-Hurwitz criterion and bifurcation conditions are investigated by using Hopf bifurcation theory, respectively. It is found that Hopf bifurcation on the initial point is supercritical in this four-dimensional autonomous system. The theoretical results are verified by numerical simulation. Besides, the new four-dimensional autonomous system under the parametric conditions of hyperchaos is studied in detail. It is also found that the system can enter hyperchaos, first through Hopf bifurcation and then through periodic bifurcation.

Four-Dimensional Mathematics Creates the Super Universe

In the common theory of the Universe, the redshift of the light wavelength from distant stars indicates the speed of the star. In this study, the model of the Universe is the surface volume of the four-dimensional sphere, and the shape of the Universe results in the most of the redshift of light wavelength. Therefore, there is no dark energy accelerating the Universe. The surface of the four-dimensional sphere is a volume, and this volume is a good model for the Universe. The surface volume of the four-dimensional sphere has been explained by a model of four-dimensional cube, within which the forming of surface volume can be easily shown. The model of four-dimensional cube containing six side cubes is ingenious for explaining the structure of the four-dimensional Universe, but it is not enough because the four-dimensional cube has not six side cubes, but eight side cubes. Therefore, in this study a better method has been created to construct the four-dimensional cube. Our three-dimensional Universe is the surface of the four-dimensional sphere Universe. The volume of our three-dimensional Universe is finite, and beneath it is the infinite volume four-dimensional Super Universe. Two important basic formulae have been derived: The surface volume of the four-dimensional sphere is π3R3 in which R is the radius of the sphere, and the fourth-power volume of the four-dimensional sphere is 1/4 π3R4. The volume of the Universe has been calculated π3R3 = 62 × 1030 ly3. Time as the fourth dimension of the space takes effect only near the speed of light, and therefore it has been ignored in this study.

Two-dimensional atom localization via probe absorption in a four-level atomic system

We have investigated the two-dimensional （2D） atom localization via probe absorption in a coherently driven four-level atomic system by means of a radio-frequency field driving a hyperfine transition. It is found that the detecting probability and precision of 2D atom localization can be significantly improved via adjusting the system parameters. As a result, our scheme may be helpful in laser cooling or the atom nano-lithography via atom localization.

新课标视域下中学历史课程“四维融合”教学模式的探索

在中学历史教学中,把握历史课程的特征,树立“述史、释史、论史、评史”四个维度的学习方式极为重要,有助于历史知识的有效掌握。述史是对基本历史知识、历史过程的叙述;释史是对知识重难点的深入阐释;论史是引导学生“以史为据”“论从史出”,参与历史讨论;评史是使用唯物史观对基本历史现象、事件和人物的客观评价。通过“四维融合”的模式,引导授课对象全过程的参与课堂学习,从而通过深度学习,促进学生形成正确的历史观,实现学生对历史知识的深度学习与掌握,实现中学历史课程教学目标的深度达成。

上颌无牙颌All-on-Four远中种植体不同倾斜角度和长度的三维有限元应力分析

目的:应用三维有限元法研究上颌无牙颌All-on-Four远中种植体在不同角度和不同长度模型中的应力分布。方法 :选择1例上颌无牙颌女性患者,采集数据,三维重建,构建上颌无牙颌"All-on-Four"种植修复的三维有限元模型。按照远中种植体角度和长度不同分为4组:A组30°11.5 mm,B组30°13.0 mm,C组45°11.5 mm,D组45°13.0 mm。100 N垂直静载荷分别加载于第一、二前磨牙及第一磨牙上模拟咀嚼受力,应用ABAQUS软件测算种植体在上颌无牙颌模型上的等效应力值。结果:垂直载荷下,应力集中在种植体颈部周围骨皮质区;远中种植体长度增加,各区域应力缓慢下降;远中种植体倾斜角度增加,应力分布分散,种植体颈部和根尖区应力明显减小。结论:远中种植体长度增加对应力分布和大小的改变并不显著,远中种植体倾斜45°比倾斜30°更有利于应力分散。

A novel hyperchaos evolved from three dimensional modified Lorenz chaotic system

This paper reports a new four-dimensional continuous autonomous hyperchaos generated from the Lorenz chaotic system by introducing a nonlinear state feedback controller. Some basic properties of the system are investigated by means of Lyapunov exponent spectrum and bifurcation diagrams. By numerical simulating, this paper verifies that the four-dimensional system can evolve into periodic, quasi-periodic, chaotic and hyperchaotic behaviours. And the new dynamical system is hyperchaotic in a large region. In comparison with other known hyperchaos, the two positive Lyapunov exponents of the new system are relatively more larger. Thus it has more complex degree.

上颌不同骨质条件下All-on-Four和翼上颌种植的生物力学分析

背景:种植固定修复已成为患者满意度更高的修复方式,All-on-Four和翼上颌种植在一定条件下均可达到种植要求,目前缺少不同骨质条件下该两种方案生物力学层面的对比分析。目的:采用三维有限元方法比较All-on-Four和翼上颌种植方案在不同骨质下应力分布的差异,探讨适宜的种植方案。方法:选取一名上颌骨骨量严重不足无牙颌患者的锥形束CT数据,建立3种不同皮质骨厚度(1.0,1.5,2.0 mm)及2种不同松质骨密度(高密度、低密度)的实体化模型,每种模型分别设计All-on-Four和翼上颌种植2种方案,共计12组模型。对双侧后牙区各施加200 N垂直静力,计算出种植体、皮质骨的von Mises应力值和钛支架变形量。结果与结论:①两种种植方案下种植体及皮质骨应力最集中处均在最远端位点,钛支架变形最大处均在支架远端;②相同松质骨密度下,无论是All-on-Four还是翼上颌种植,种植体、皮质骨von Mises应力值及钛支架变形量均在皮质骨厚度1 mm时最大,随着皮质骨厚度的增加,种植体、皮质骨von Mises应力值及钛支架变形量减小;③相同种植方案下,低密度松质骨组种植体、皮质骨von Mises应力值及钛支架变形量均大于高密度松质骨组;④相同骨质条件下,翼上颌种植组种植体、皮质骨von Mises应力值及钛支架变形量均小于All-on-Four组(P<0.05);⑤结果表明,皮质骨厚度和松质骨密度增加有利于减小种植体、皮质骨的应力集中和钛支架变形,从生物力学角度,翼上颌种植方案较All-on-Four更有利于种植固定修复的远期预后。

4D-Flow MRI在肥厚型心肌病左室流出道血流评估中的价值探索

目的 探索四维血流(four-dimensional flow,4D-Flow)磁共振成像(magnetic resonance imaging,MRI)技术在左心室腔内应用的可行性。材料与方法 本研究为前瞻性、横断面研究,纳入2022年8月至2023年1月于我院接受心脏MRI检查的21例肥厚型心肌病患者,采用3.0 T MRI扫描仪进行二维血流(tow-dimensional flow,2D-Flow)及4D-Flow成像,收集患者一周内进行的超声心动图检查结果。采用组内相关系数(inter-class correlation coefficient,ICC)、变异系数(coefficients of variation,COV)及Bland-Altman分析比较2D-Flow、4D-Flow评估左室流出道峰值流速的可重复性及一致性,并通过Pearson相关性分析探究二者与超声心动图测量结果的关系。结果 2D-Flow和4D-Flow观察者内/观察者间的ICC分别为0.999/0.999和0.995/0.992,COV分别为0.5%/0.5%和2.4%/2.6%。4D-Flow与超声心动图的测量结果呈中度相关,相关系数r值为0.574(P=0.006),但一致性较差,ICC为0.375(P=0.013)。2D-Flow与4D-Flow和超声心动图间无显著的一致性及相关性。结论 4D-Flow技术能够可视化心腔内血流模式,对左室流出道峰值流速的测量具有高度可重复性,且与超声心动图的测量结果具有显著的一致性。