Numerical Analysis of the Influence of Turbulence Intensity on Iced Conductors Gallop Phenomena

Turbulence is expected to play a relevant role in the so-called conductor gallop phenomena,namely,the high-amplitude,low-frequency oscillation of overhead power lines due to the formation of ice structures and the ensu-ing effect that wind can have on these.In this work,the galloping time history of a wire with distorted(fixed in time)shape due to the formation of ice is analyzed numerically in the frame of afluid-solid coupling method for different wind speeds and levels of turbulence.The results show that the turbulence intensity has a moderate effect on the increase of the conductor’s aerodynamic lift and drag coefficients due to ice accretion;nevertheless,the corresponding changes in the torsion coefficient are very significant and complicated.A high turbulence intensity can affect the torsion coefficient in a certain range of attack angles and increase the torsion angle of the conductor.Through comparison of the galloping phenomena for different wind velocities,it is found that the related amplitude grows significantly with an increase of the wind speed.For a relatively large wind speed,the galloping amplitude is more sensitive to the turbulence intensity.Moreover,the larger the turbulence intensity,the larger the conductor’s vertical and horizontal galloping amplitudes after icing.The torsion angle also increases with an increase in the wind speed and turbulence intensity.

Theoretical analysis for the mechanical behavior caused by an electromagnetic cycle in ITER Nb3Sn cable-in-conduit conductors

The central solenoid（CS）is one of the key components of the International Thermonuclear Experimental Reactor（ITER）tokamak and which is often considered as the heart of this fusion reactor.This solenoid will be built by using Nb3Sn cablein-conduit conductors（CICC）,capable of generating a 13 T magnetic field.In order to assess the performance of the Nb3Sn CICC in nearly the ITER condition,many short samples have been evaluated at the SULTAN test facility（the background magnetic field is of 10.85 T with the uniform length of 400 mm at 1%homogeneity）in Centre de Recherches en Physique des Plasma（CRPP）.It is found that the samples with pseudo-long twist pitch（including baseline specimens）show a significant degradation in the current-sharing temperature（Tcs）,while the qualification tests of all short twist pitch（STP）samples,which show no degradation versus electromagnetic cycling,even exhibits an increase of Tcs.This behavior was perfectly reproduced in the coil experiments at the central solenoid model coil（CSMC）facility last year.In this paper,the complex structure of the Nb3Sn CICC would be simplified into a wire rope consisting of six petals and a cooling spiral.An analytical formula for the Tcs behavior as a function of the axial strain of the cable is presented.Based on this,the effects of twist pitch,axial and transverse stiffness,thermal mismatch,cycling number,magnetic distribution,etc.,on the axial strain are discussed systematically.The calculated Tcs behavior with cycle number show consistency with the previous experimental results qualitatively and quantitatively.Lastly,we focus on the relationship between Tcs and axial strain of the cable,and we conclude that the Tcs behavior caused by electromagnetic cycles is determined by the cable axial strain.Once the cable is in a compression situation,this compression strain and its accumulation would lead to the Tcs degradation.The experimental observation of the Tcs enhancement in the CS STP samples should be considered as a contribution of the shorter length of the high field zone in SULTAN and CSMC devices,as well as the tight cable structure.

MODES COMPUTATION AND ANALYSIS FOR LONG MULTI-SPAN BUNDLE CONDUCTORS OF POWER TRANSMISSION LINES WITH GALLOPING CONTROL DEVICES

A new type of element which is suitable for solving the modes of thegalloping long multi-span bundle conductor structures is presented. The element is composed of allsub-conductor segments between two spacers. Based on the linearized governing differential equationsof the conductors, the mass matrix and stiffness matrix of the element in consideration of theconstrained relations imposed on the conductors by spacers are derived. The dynamic characteristicsof the galloping control devices can be directly added to the element. The modes for an actual powerline structure are computed by using the element formula and FEM procedures, where seven cases ofdifferent galloping control device allocations are considered. Compared with the measured data, themethod is shown to be reliable and effective. Analysis and discussions of the computational resultsare given. Some hints that are helpful to further investigation of galloping are also obtained .

Fabrication of NiO Buffer Layer for YBCO Coated Conductors by Combining Sputtering and SOE Method

In research of YBCO coated conductors, the development of a oxide template for epitaxial growth of YBCO is very important. Matsumoto et al have demonstrated the potential of the surface oxidation epitaxial (SOE) route for formation a cube textured NiO layer on nickel tapes. The epitaxial NiO functions as a buffer layer of chemical reaction between YBCO and nickel, and as a template for the epitaxial growth of YBCO. However, the surface quality of NiO is difficult to control and defects such as crack, spall and deep grooves exist in SOE NiO layer. A new approach combining sputtering and SOE method to obtain crack-free and cube textured NiO layer were reported. Ni tapes prepared by the combination of rolling and recrystallization were used for this work. A coating of Ni was first deposited on the tapes via magnetron sputtering. Then on the coating tapes, continuous and textured NiO layer were achieved by SOE technology.

Two-dimensional equations for thin-films of ionic conductors

A theoretical model is developed for predicting both conduction and diffusion in thin-film ionic conductors or cables. With the linearized Poisson-Nernst-Planck(PNP)theory, the two-dimensional(2D) equations for thin ionic conductor films are obtained from the three-dimensional(3D) equations by power series expansions in the film thickness coordinate, retaining the lower-order equations. The thin-film equations for ionic conductors are combined with similar equations for one thin dielectric film to derive the 2D equations of thin sandwich films composed of a dielectric layer and two ionic conductor layers. A sandwich film in the literature, as an ionic cable, is analyzed as an example of the equations obtained in this paper. The numerical results show the effect of diffusion in addition to the conduction treated in the literature. The obtained theoretical model including both conduction and diffusion phenomena can be used to investigate the performance of ionic-conductor devices with any frequency.

Present Status of the Development and Application of Transparent Conductors Oxide Thin Solid Films

Luis Casta&ntildeeda’s article, 'Present Status of the Development and Application of Transparent Conductors Oxide Thin Solid Films ', has been retraced by Ray Boxman because of plagiarism. The scientific community takes a very strong view on this matter and we treat all unethical behavior such as plagiarism seriously. This paper published in Vol.2 No.9 1233-1242, 2011, has been removed from this site.

Experimental Study on the Influence of Cross-Section Type of Marine Cable Conductors on the Bending Performance

Through the development of marine energy,marine cables are the key equipment for transmission of electrical energy between surface platforms and underwater facilities.Fatigue failure is a critical failure mode of marine cables.The bending performance of the cable conductor has a major influence on both bending and fatigue performances of the overall cable structure.To study the influence of different types of the conductor cross-section on the bending performances of marine cable conductors,three types of copper conductors with the same cross-sectional area,i.e.,noncompressed round,compressed round,and shaped wire conductors,were selected.The experimental results demonstrated that the cross-section type significantly affects the bending performances of copper conductors.In particular,the bending stiffness of the shaped wire conductor is the highest among the three conductor types.Four key evaluation parameters,i.e.,the bending stiffness,maximum bending moment,envelope area,and engineering critical slip point,were selected to compare and analyze the bending hysteresis curves of the three copper conductors.The differences in the key evaluation parameters were analyzed based on the structural dimensional parameters,processing methods,and classical bending stiffness theoretical models of the three copper conductor types.The results provide an important theoretical guidance for the structural design and engineering applications of marine cable conductors.

EFFECTS OF DISPERSED SECOND-PHASE PARTICLES ON MIXED CONDUCTORS OF Li_(1+x)V_3O_8(X=0, 1)

The structure and electric properties of the mixed conductors of Li_(1+x)V_3O_8(x=0.1) containing dispersed second-phase α-Al_2O_3 particles have been studied in the paper. The total conductivity of the specimen containing 6m/o α-Al_2O_3 is five or six times as much as that of pure Li_(1+x)V_3O_8 (x=0.1) at room temperature. By the analyses of NMR and ESR, it is known that at low temperature, the transport activation energy of Li^+ ions reduced, the transport frequency of Li^+ ions are speeded up and thus ionic conductivity increased in the specimens containing α-Al_2O_3 particles. At high temperature, diffusion effect of α-Al_2O_3 on electronic transport becomes great, the enhancement of ionic conductivity caused by α-Al_2O_3 doesn't make up the decrease of electronic conductivity caused by the diffusion effect, so that total conductivity of the specimens containing DSPP is lower than that of pure Li_(1+x)V_3O_8(x=0.1). As a result, DSPP mainly increases ionic conductivity of the mixed conductors at room temperature.

Analysis of Cable-in-Conduit Conductors' DC Performance in Light of Strand's Experimental Properties

Conductor qualification will be carried out with four Cable-in-Conduit Conductor （CICC） samples made of superconducting strands. The direct current （DC） performance of these samples will be tested in the SULTAN facility. The critical current densities of the strands can be well simulated by empirical equations. In this paper, a model is illustrated to predict the DC behaviour of the cable in light of the single strand＇s experimental properties. The simulation results were compared with experimental results.

IONIC CONDUCTION MECHANISM IN Na_(5+x)YA1_xSi_(4-x)O_(12) SUPERIONIC CONDUCTORS

Na_(5+x) YAl_x Si_(4-x) O_(12) polycrystalline solid electrolytes are prepared by solid reactions. By the analyses of X-ray, TG and DTA, infrared spectu re, and SEM, the variasion of their density with the composition X are discussed Their electric conductivity in the temperature range of R. T. to 300℃ are determined with electric brigde, and their variasions with the compositions X and temperature are studied. Their activations in the tem- perature range 140℃ to 300℃ are calculated, and their variation with the compositons X are discussed.

Studies on a New System of Lithium Fast Ion Conductors Based on Kaolinite and LiZr_2(PO_4)_3

Natural layered aluminosilicate Kaolinite Al_(4)[Si_(4)O_(10)](OH)_(8)has been used as a starting material for preparing a new system of lithium fast ion conductors by high temperature(1073-1223 K)solid state reactions.X-ray powder diffraction and a.c.impedance technique were used to characterize the compositions of the Li_(1+2x)Al_(x)Zr_(2-x)Si_(x)P_(3-x)O_(12)system.A single pure solid solution phase with R3c space group can be formed in the composition range of x≤04.A specimen with x=03 possesses a maximum ionic conductivity which reaches up to 103×10^(-2)s/cm at 723 K and the activation energy is 2963 kJ/mol.

Application of protonic conductors in metallurgy

Two types of disposable EMF hydrogen sensors for measurements ofsolute contents of liquid metals in situ in metal-refining processesand their general principles are introduced. The way to design newelectrochemical sensors and the direction to develop new protonicconductors as new electrochemical sensors are discussed. Thefeasibility of protonic conductors worked as hydrogen pump innon-ferrous metal refining processes is discussed as well.

Preparation and Characterization of CeO_2/YSZ/CeO_2 Buffer Layers for YBCO Coated Conductors

CeO2 seed layer was deposited on rolling-assisted biaxially textured metal substrates by direct-current （DC） magnetron reactive sputtering. The effect of deposition temperature on epitaxial orientation of CeO2 thin films was examined. High quality CeO2 layers were achieved at deposition temperature from 750℃ to 850℃.Subsequently yttria-stabilized zirconia （YSZ） and CeO2 films were deposited to complete the buffer layer structure via the same process. The best samples exhibited a highly biaxial texture, as indicated by FWHM （full width half maximum） values in the range of 4°-5°, and 2°-4° for in-plane and out-of-plane orientations,respectively. Secondary ion mass spectrometer analysis confirmed the effective prevention of buffer layer against Ni and W metal interdiffusion. Atomic force microscope observations revealed a smooth, dense and crack-free surface morphology, which provided themselves as the good buffer structure to the YBa2Cu3O7-δ（YBCO） coated conductors.

Study on Lithium Fast Ion Conductors of Li_(3x)La_(0.67-x) In_yTi_(1-2y)P_yO_3 System

Perovskite type lithium fast ion conductors of Li 3 x La 0.67- x In y Ti 1-2 y P y O 3 system were prepared by solid state reaction. X ray powder diffraction shows that perovskite solid solution forms in the ranges of x =0.10～0.12, y ≤0.2. AC impedance measurements indicate that the bulk conductivities and the total conductivities are of 1×10 -4 and 1× 10 -5 S·cm -1 at 25 ℃ respectively. The compositions have low bulk activation energies of 20 kJ·mol -1 in the temperature ranges of 298～523 K and total activation energies of 40 kJ·mol -1 in the temperature ranges of 298～623 K.

Numerical Analysis on the Magneto-Elastic Stability of Current-Carrying Conductors: Aiming at Applications for the Tokamak System

A novel method for calculating the magnetic stiffness matrix was proposed for the numerical analysis of the magneto-elastic stability of complicated current-carrying structures aim- ing for application in the magneto-elastic behavior of the tokamak system. A code based on the proposed method was developed and applied to the numerical analysis of two typical current- carrying structures. The good consistency of the numerical and analytical results validated the proposed method and the related numerical code.

Growth and Characterization of Doped CeO_2 Buffers on Ni-W Substrates for Coated Conductors Using Metal Organic Deposition Method

CeO2 and Ce0.8M0.2O2-d films （M = Mn, Y, Gd, Sm, Nd and La） with （00l） preferred orientation have been prepared on biaxially textured Ni-W substrates by metal organic decomposition （MOD） method. The factors influencing the formation of cracks on the surface of these CeO2 and doped CeO2 films on Ni-W substrates were explored by X-ray diffraction （XRD）, scanning electron microscopy （SEM） analysis, atomic force microscopy （AFM） and differential scanning calorimetry （DSC）. The results indicate that many factors, such as the change of the ionic radii of doping cations, the transformation of crystal structure and the formation of oxygen vacancies in lattices at high annealing temperature, may be related to the formation of cracks on the surface of these films. However, the crack formation shows no dependence on the crystal lattice mismatch degree of the films with Ni-W substrates. Moreover, the suppression of surface cracks is related to the change of intrinsic elasticity of CeO2 film with doping of cations with a larger radius. SEM and AFM investigations of Ce0.8M0.2O2-d （M = Y, Gd, Sm, Nd and La） films reveal the dense, smooth and crack-free microstructure, and their lattice parameters match well with that of YBCO, illuminating that they are potentially suitable to be as buffer layer, especially as cap layer in multi-layer architecture of buffer layer for coated conductors.

Synthesis and Characterization of Fine Grained High Density La_2Mo_2O_9-based Oxide-ion Conductors

A cost-efFective technique, including nanocrystalline powder preparation using a modified Pechini method and a two-step low-temperature sintering route, was developed for the synthesis of high performance La2Mo2O9- based oxide-ion conductors. The optimum parameters of the compaction pressure, the first step and ＇the second step sintering temperatures for the synthesis of fine grained, high density and uniform La2Mo2O9- based oxide-ion conductors were determined by a series of sintering experiments. High density and uniform sintered La2Mo2O9 samples with average grain size from 0.8 to 5 μm and La1.96K0.04Mo2O8.96 sample with average grain size as small as 500 nm were synthesized by using this cost-efFective method. The impedance measurement results show that the as-fabricated La2Mo2O9-based ceramics possess much higher ionic conductivity than that obtained by solid state reaction method. It is found that in the range of 0.8-5μm the grain size of dense La2Mo2O9 samples prepared from the nanocrystalline powders has little influence on their conductivities.

Low-voltage antimony-doped SnO_2 nanowire transparent transistors gated by microporous SiO_2-based proton conductors

A battery drivable low-voltage transparent lightly antimony（Sb）-doped SnO2 nanowire electric-double-layer （EDL） field-effect transistor （FET） is fabricated on an ITO glass substrate at room temperature. An ultralow operation voltage of 1 V is obtained on account of an untralarge specific gate capacitance （- 2.14 μF/cm2） directly bound up with mobile ions-induced EDL （sandwiched between the top and bottom electrodes） effect. The transparent FET shows excellent electric characteristics with a field-effect mobility of 54.43 cm2/V. s, current on/off ration of 2 × 104, and subthreshold gate voltage swing （S = dVgs/d（logIds）） of 140 mV/decade. The threshold voltage Yth （0.1 V） is estimated which indicates that the SnO2 namowire transistor operates in an n-type enhanced mode. Such a low-voltage transparent nanowire transistor gated by a microporous SiO2-based solid electrolyte is very promising for battery-powered portable nanoscale sensors.

Phase Transformation and Optimized Growth of TFA-MOD REBa_2Cu_3O_(7-x) Films for Coated Conductors

Several types of REBa2Cu3O7-x （REBCO, RE=Y, Ho etc.） films are prepared on single crystal substrate LaAIO3 by TFA-MOD method. The phase transformation and optimized growth conditions in the crystallization are studied. Compared with SmBCO and GdBCO, high quality YBCO and HoBCO films are relatively easy to produce. It is revealed that the YBCO grains can form at low temperatures such as 730 ℃ during the initial heating ramp. With a high heating rate of 20 K/min and a low oxygen pressure of 100 ppm, the optimum growth temperature is around 780℃, at which the films show a Jc value of 2.88 MMcm2. Further decrease of the heating rate may produce the highquality YBCO Film with a higher Jc of 3.65 MA/cm2. The temperature dependence of resistances in various magnetic fields up to 9 T shows that the present TFAMOD YBCO and HoBCO films have similar superonducting transition temperature and magnetotransport properties.

Inhibiting Ice Accumulation on Conductors by Using Sheath Treated with Super-hydrophobic Surfaces

Ice accumulation on transmission lines often leads to great damage to power systems.Super-hydrophobic surfaces are proposed to inhibit ice accumulation on electrical power equipment.A novel anti-icing method was presented for conductors with super-hydrophobic sleeves.The super-hydrophobic sleeves were prepared by applying polydimethylsiloxane(PDMS) and nano-silica hybrid coating on the outer surface of polyethylen terephthalate(PET) sleeves.Hydrophobicity and ice adhesion strength of the super-hydrophobic surface were investigated.Ice accumulation experiments were carried out on ordinary conductors,super-hydrophobic coated conductors,PET sleeve-covered conductors,and super-hydrophobic PET sleeve-covered conductors.Ice accumulation morphology,accumulated ice weight,and the icicle length of these four types of conductors were studied and analyzed.At the end of the 3 h ice accumulation experiment,the ice weight and icicle length on the conductor with super-hydrophobic PET sleeve was only approximately one tenth and one seventh of that on the untreated conductor respectively.Furthermore,the water contact angles of super-hydrophobic coated aluminum surface and super-hydrophobic coated PET sleeve were about 163o in average.The results indicate that the super-hydrophobic coating is effective in inhibiting ice accumulation on conductors.However,the use of a super-hydrophobic PET sleeve is a significantly more effective method,comparing with the application of a super-hydrophobic coating directly on the conductor.