2.5 Gbit/s monolithic ICs for optical fiber transmitter and receiver in 0.35 μm CMOS process

2.5 Gbit/s monolithic integrated circuits （ICs） for optical fiber transmitter and receiver in 0.35 μm CMOS （complementary metal-oxide-semiconductor transistor） process are presented. The transmitter, which includes a 4： 1 multiplexer and a laser diode driver （LDD）, has four 622 Mbit/s random signals as its inputs and gets a 2.5 Gbit/s driving signal as its output; the receiver detects a 2.5 Gbit/s random signal and gets four 622 Mbit/s signals at the output. The main circuits include a trans-impedance amplifier （TIA）, a limiting amplifier, a clock and data recovery （CDR） unit, and a 1： 4 demultiplexer （DEMUX）. Test results prove the logic functions of the transmitter to be right, and the 10% to 90% rise and fall times of transmitter＇s output data eye diagram are 211.1 ps and 200 ps, respectively. The sensitivity of the receiver is measured to be better than 20 mV. The root mean square jitter of the DEMUX＇s output data is 15.6 ps and that of the clock after 1： 4 frequency dividing is 1.9 ps. Two chips are both applicable to 2.5 Gbit/s optical fiber communication systems.

Optical transmitter module with hybrid integration of DFB laser diode and proton-exchanged LiNbO_(3)modulator chip

In this work,a hybrid integrated optical transmitter module was designed and fabricated.A proton-exchanged Mach–Zehnder lithium niobate(LiNbO_(3))modulator chip was chosen to enhance the output extinction ratio.A fiber was used to adjust the rotation of the polarization direction caused by the optical isolator.The whole optical path structure,including the laser chip,lens,fiber,and modulator chip,was simulated to achieve high optical output efficiency.After a series of process improvements,a module with an output extinction ratio of 34 dB and a bandwidth of 20.5 GHz(from 2 GHz)was obtained.The optical output efficiency of the whole module reached approximately 21%.The link performance of the module was also measured.

Electro-Optical Model of Soiling Effects on Photovoltaic Panels and Performance Implications

In this paper,a detailed model of a photovoltaic(PV)panel is used to study the accumulation of dust on solar panels.The presence of dust diminishes the incident light intensity penetrating the panel’s cover glass,as it increases the reflection of light by particles.This phenomenon,commonly known as the“soiling effect”,presents a significant challenge to PV systems on a global scale.Two basic models of the equivalent circuits of a solar cell can be found,namely the single-diode model and the two-diode models.The limitation of efficiency data in manufacturers’datasheets has encouraged us to develop an equivalent electrical model that is efficient under dust conditions,integrated with optical transmittance considerations to investigate the soiling effect.The proposed approach is based on the use of experimental current-voltage(I-V)characteristics with simulated data using MATLAB/Simulink.Our research outcomes underscores the feasibility of accurately quantifying the reduction in energy production resulting from soiling by assessing the optical transmittance of accumulated dust on the surface of PV glass.

Optical nonlinearity measurement of 4-(N-methyl,N-hydroxyethl)amino,4'-nitroazobenzene using a transmittance technique with a phase object(T-PO) with top-hat beams at 600-nm wavelength

The transmittance technique with a phase object（T-PO）,for measuring optical nonlinear coefficients is proposed with a top-hat beam.The sensitivity of the T-PO with a top-hat beam is a factor of 4 greater than that with a Gaussian beam.The validity of this method is verified by measuring the nonlinearity of a well-characterized liquid,CS 2 at 532-nm wavelength.The ease of use of this method has been proved by measuring a new compound 4-（N-methyl,N-hydroxyethyl）amino,4＇-nitroazobenzene（ANAB） at 600-nm wavelength,indicating that this method can be extended to the measurement of optical nonlinearities in a wide-band spectrum.

Transmittance Measurement of the Nonplanar Optical Based on Focal-Plane-Array Camera

Aiming to solve the problem that it is difficult to accurately measure UV cut-off transmittance of xenon quartz glass by using present spectrophotometer in China SG III project. Through the analysis, we believe that its reason was that the xenon quartz glass was nonplanar so the outgoing beam geometry from under-test was different from that from standard sample. A method of transmittance measurement based on focal-plane-array camera was proposed in this article. The effects of camera uniformity and spot sampling on transmittance measurement were analyzed theoretically. This method, which can reduce the effect of beam geometry on transmittance measurement and eliminate the cutting error occurring during light transmission by monitoring the completeness of incident beam in real-time, is verified from experiments. The random standard uncertainty of this method here is 0.035% or less. It is particularly useful in the transmittance measurement of nonplanar optical.

Effect of annealing treatment on the structural, optical, and electrical properties of Al-doped ZnO thin films

Highly conductive and transparent Al-doped ZnO （AZO） thin films were prepared from a zinc target containing Al （1.5 wt.%） by direct current （DC） and radio frequency （RF） reactive magnetron sputtering. The structural, optical, and electrical properties of AZO films as-deposited and submitted to annealing treatment （at 300 and 400℃, respectively） were characterized using various techniques. The experimental results show that the properties of AZO thin films can be further improved by annealing treatment. The crystallinity of ZnO films improves after annealing treatment. The transmittances of the AZO thin films prepared by DC and RF reactive magnetron sputtering are up to 80% and 85% in the visible region, respectively. The electrical resistivity of AZO thin films prepared by DC reactive magnetron sputtering can be as low as 8.06 x 10-4 Ωcm after annealing treatment. It was also found that AZO thin films prepared by RF reactive magnetron sputtering have better structural and optical properties than that prepared by DC reactive magnetron sputtering.

Electronic structure and optical properties of In-doped SrTiO3 by density function theory

The effect of In doping on the electronic structure and optical properties of SrTiO3 is investigated by the first-principles calculation of plane wave ultra-soft pseudo-potential based on the density function theory （DFT）. The calculated results reveal that due to the hole doping, the Fermi level shifts into valence bands （VBs） for SrTi1-x InxO3 with x = 0.125 and the system exhibits p-type degenerate semiconductor features. It is suggested according to the density of states （DOS） of SrTi0.875In0.125O3 that the band structure of p-type SrTIO3 can be described by a rigid band model. At the same time, the DOS shifts towards high energies and the optical band gap is broadened. The wide band gap, small transition probability and weak absorption due to the low partial density of states （PDOS） of impurity in the Fermi level result in the optical transparency of the film. The optical transmittance of In doped SrTiO3 is higher than 85% in a visible region, and the transmittance improves greatly. And the cut-off wavelength shifts into a blue-light region with the increase of In doping concentration.

Glycerol effects on optical,weight and geometrical properties of skin tissue

Complex study of glycerol effects on the skin tissue was performed.The change in optical,weight and geometrical parameters of the rat skin under the action of the glycerol solutions was studied ex vivo.Possible mechanisms of the skin optical clearing under the action of glycerol solutions of different concentrations were discussed.The results can be helpful for refinement of models developed to evaluate the effective diffusion coefficients of glycerol in tissues.

The effects of post-thermal annealing on the optical parameters of indium-doped ZnO thin films

Indium-doped ZnO thin films are deposited on quartz glass slides by RF magnetron sputtering at ambient temperature. The as-deposited films are annealed at different temperatures from 400℃ to 800 ℃ in air for 1 h. Transmittance spectra are used to determine the optical parameters and the thicknesses of the films before and after annealing using a nonlinear programming method, and the effects of the annealing temperatures on the optical parameters and the thickness are investigated. The optical band gap is determined from the absorption coefficient. The calculated results show that the film thickness and optical parameters both increase first and then decrease with increasing annealing temperature from 400℃ to 800℃. The band gap of the as-deposited ZnO：In thin film is 3.28 eV, and it decreases to 3.17 eV after annealing at 400℃. Then the band gap increases from 3.17 eV to 3.23 eV with increasing annealing temperature from 400℃ to 800℃.

Electrical and optical properties of indium tin oxide/epoxy composite film

The electrical and optical properties of the indium tin oxide （ITO）/epoxy composite exhibit dramatic variations as functions of the ITO composition and ITO particle size. Sharp increases in the conductivity in the vicinity of a critical volume fraction have been found within the framework of percolation theory. A conductive and insulating transition model is extracted by the ITO particle network in the SEM image, and verified by the resistivity dependence on the temperature. The dependence of the optical transmittance on the particle size was studied. Further decreasing the ITO particle size could further improve the percolation threshold and light transparency of the composite film.

Preparation and Microstructural,Structural,Optical and Electro-Optical Properties of La Doped Pmn-Pt Transparent Ceramics

Transparent relaxor ferroelectric ceramics of the system lanthanum modified lead magnesium niobate have been investigated for a variety of electro-optic properties could make these materials alternatives to (Pb,La)(Zr,Ti)O3. However, a study that relates the properties in function stoichiometric formula, it has not been analyzed heretofore. Therefore, in this work the effect of A-site substitution of La+3 in the characterization microstructural, structural, optical and electro-optical on (1-x)[Pb(1-3/2y)Lay(Mg1/3Nb2/3)O3]-xPbTiO3 and (1-z)[(1-x)Pb(Mg1/3Nb2/3)O3+xPbTiO3]+zLa2O3 has been performed. It was observed that the properties according to the stoichiometric formula and the PT had a maximum whose behavior was related to the addition of lanthanum in each stoichiometries.

Preliminary Study on Electrical and Optical Properties of ZnO Film Grown by MOCVD

ZnO films with low resistivity and high transmittance in the visible optical region were deposited on GaAs and glass substrates by MOCVD at atmospheric pressure using diethyl zinc and tetrahydrofuran as precursors.The X ray diffraction results revealed that ZnO epilayer on GaAs showed good crystalline character and exhibited (002) orientation with the c axis perpendicular to the substrate surface.The resistivity of ZnO films in the range from 10 -3 ～10 -2 Ω·cm was found to be dependent upon the initial partial pressure of diethyl zinc and tetrahydrofuran.

Influence of Alumina Addition on the Optical Property of Zirconia/Alumina Composite Dental Ceramics

The influence of various alumina additions on the optical property of zirconia/alumina composite ceramics was investigated. The relative sintered densities, transmittances, color and the microstructure of the composite ceramics were studied. The experimental results showed that the relative sintered densities and transmittances decreased with alumina addition. The lightness increased obviously but the chroma change was small. Pure zirconia nanopowders sintered densely could obtain the relatively high transmittance, while the transmittance and the lightness of slight addition changed significantly. The zirconia/alumina composite ceramics with alumina addition less than 7.5wt% could achieve the relatively stable and reliable optical properties.

OPTICAL MEA SUREMENTS OF RAT MUSCLE SAMPLES UND ER TREATMENT WITH ETHYLENE GLYCOL AND GLUCOSE

With the objective to study the variation of optical properties of rat muscle during optical clearing,we have performed a set of optical measurements from that kind of tissue.The.measurements performed were total tr ansmittance,ollimated transmit tance,specular reflec-tance and total reflectance.This set of measurements is suficient to determine diffuse reflectance and absorbance of the sample,also necessary to est imate the optical properties.All the per formed measurements and calculated quantities will be used later in inverse Monte Carlo(IMC)simu-lations to determine the evolution of the optical properties of muscle during treatments with ethylene glycol and glucose.The results obt ained with the measurements already provide some information about the optical c learing treatments applied to the muscle and translate the mechanisms of turning the tissue more transparent and sequence of regimes of optical clearing.

Effect of Heat Treatment on the Nanoscale Structure and Optical Properties of Cd₂SnO₄Thin Films Deposited by RF Magnetron Sputtering

Cadmium tin oxide Cd2SnO4 thin films with a thickness of 228.5 nm were prepared by RF magnetron sputtering technique on glass substrates at room temperature. AFM has been utilized to study the morphology of these films as a function of annealing temperature at the nanoscale. The optical properties of these films, such as the transmittance, T(λ), and reflectance, R(λ), have been studied as a function of annealing temperature. The optical constants, such as optical energy gap, width of the band tails of the localized states, refractive index, oscillatory energy, dispersion energy, real and imaginary parts of both dielectric constant and optical conductivity have been found to be affected by changing the annealing temperature of the films.

Performance Improving of a Concentrating Photovoltaic System by Using a New Optical Adhesive

The objective of this present study is to manufacture a new silicone-based adhesive which is used for gluing and bonding the second optical elements (SOE) with Concentrating Photovoltaic solar cell (CPV) in order to guarantee a thickness that can provide a good silicone adherence to obtain long term stability and keeping a good solar transmittance performance, too. This new adhesive is made up of a mixture of silicone and transparent glass balls. The experimental part consists of the choice of the best size of glass balls with the suitable proportion of the glass balls weight in the mixture. For this purpose, ten samples were manufactured for every category of glass balls and weight ratio. Glass ball sizes between 100 and 1100 μm, and weight ratios between 1 and 10% were analyzed. For each category of glass balls, four proportions were mixed with the silicone. The thicknesses and transmittance of every sample were measured with appropriate instruments. The experimental results illustrate that the mixture containing balls with sizes inferior to 106 μm, is the best mixture which assures adhesive minimum thickness value necessary for an efficient mechanical bond and preserves also a good transmittance of solar irradiance.

An Arrangement of Channels and Transceivers in Optical Packet Switching Networks

Based on a media access and control（MAC）protocol,an arrangement of channels and transceivers in optical packet switching dense wavelength division multiplexing（DWDM）networks is proposed in this paper.In order to reduce the cost of nodes,fixed transmitters and receivers are used instead of tunable transmitters and receivers.Two fixed transmitters and many fixed receivers are used in each node in the scheme.The average waiting delay of this scheme is analyzed through mathematics and computer simulation.The result shows that the property of the scheme is almost the same as using tunable transmitter and receiver.Furthermore,if the tuning time of tunable transmitters is taken into account,the performance of the tunable transmitter scheme is poor than this scheme at the average waiting delay and throughput of the network.

Porous block copolymer films with self-adjustable optical transmittance and passive radiative cooling

As an energy-free cooling technique,radiative cooling has garnered significant attention in the field of energy conservation.However,traditional radiative cooling films often possess static optical properties and their inherent opacity limits their applications in building such as windows.Therefore,there exists a requirement for passive radiative cooling films endowed with adjustable transmittance.Here we report the porous block copolymer films with self-adjustable optical transmittance and passive radiative cooling.In a result,the film exhibited a high solar reflectance(0.3-2.5μm)of 96.9%and a high infrared emittance(8-13μm)of 97.9%.Outdoor experiments demonstrated that the film surface temperature was 6.6℃lower than ambient temperature,with a cooling power of 104.8 W·m^(-2).In addition,the film’s transmittance can be regulated by altering the polarity of the post-processing solvent,providing an effective approach for regulating indoor light intensity and thermal balance,thereby enhancing the applicability of radiative cooling.

112 Gbit/s transmitter optical subassembly based on hybrid integrated directly modulated lasers

Based on the hybrid integration technology, an ultra-compact and low cost transmitter optical subassembly module is proposed. Four directly modulated lasers are combined with a coarse wavelength division multiplexer operated at the O-band. The bandwidth for all channels is measured to be approximately 3 GHz. The 112 Gb∕s transmission is experimentally demonstrated for a 10 km standard single mode fiber（SSMF）, in which an optical isolator is used for avoiding the back-reflected and scattered light to improve the bit error rate（BER） performance. A low BER and clear eye opening are achieved for 10 km transmission.

紫外规则透射比国际比对

为保证我国紫外透射量值与国际的一致性,中国计量科学研究院代表我国参加了在2018年至2019年间,欧亚计量合作组织(COOMET)组织的首次紫外透射比的研究性比对。这次比对采用了4组溶液作为比对样品,透射比量值标称值覆盖5%~90%,波段覆盖235~350 nm。比对结果表明,各参比实验室测量结果基本一致。在透射比50%附近,我国与距离国际参考值的偏离量最大不超过0.12%;在透射比20%附近,我国与距离国际参考值的偏离量不足0.08%;在透射比10%附近,我国与距离国际参考值的偏离量不超过0.03%。