Numerical study of fatigue damage of asphalt concrete using cohesive zone model

In order to investigate the fatigue behavior of asphalt concrete, a new numerical approach based on a bi-linear cohesive zone model （CZM） is developed. Integrated with the CZM, a fatigue damage evolution model is established to indicate the gradual degradation of cohesive properties of asphalt concrete under cyclic loading. Then the model is implemented in the finite element software ABAQUS through a user-defined subroutine. Based on the proposed model, an indirect tensile fatigue test is finally simulated. The fatigue lives obtained through numerical analysis show good agreement with laboratory results. Fatigue damage accumulates in a nonlinear manner during the cyclic loading process and damage initiation phase is the major part of fatigue failure. As the stress ratio increases, the time of the steady damage growth stage decreases significantly. It is found that the proposed fatigue damage evolution model can serve as an accurate and efficient tool for the prediction of fatigue damage of asphalt concrete.

Evaluation of Blast-Resistant Performance Predicted by Damaged Plasticity Model for Concrete

in order to evaluate the capacity of reinforced concrete （RC） structures subjected to blast Ioadings, the damaged plasticity model for concrete was used in the analysis of the dynamic responses of blast-loaded RC structures, and all three failure modes were numerically simulated by the finite element software ABAQUS. Simulation results agree with the experimental observations. It is demonstrated that the damaged plasticity model for concrete in the finite element software ABAQUS can predict dynamic responses and typical flexure, flexure-shear and direct shear failure modes of the blast-loaded RC structures.

A Damage Model of Concrete under Freeze-Thaw Cycles

The frost durability of concrete is considered from structural engineering points of view.Specific failure process is analyzed and a damage model is established,which can describe the deterioration of concrete during the whole freeze thawing process.The model is verified by test data.The parameters of model can explain the effect of pore structures or water to binder ratio on frost durability of concrete.

Fluid solid coupling model based on endochronic damage for roller compacted concrete dam

According to the characteristics of thin-layer rolling and pouting construction technology and the complicated mechanical behavior of the roller compacted concrete dam （RCCD） construction interface, a constitutive model of endochronic damage was established based on the endochronic theory and damage mechanics. The proposed model abandons the traditional concept of elastic-plastic yield surface and can better reflect the real behavior of rolled control concrete. Basic equations were proposed for the fluid-solid coupling analysis, and the relationships among the corresponding key physical parameters were also put forward. One three-dimensional finite element method （FEM） program was obtained by studying the FEM type of the seepage-stress coupling intersection of the RCCD. The method was applied to an actual project, and the results show that the fluid-solid interaction influences dam deformation and dam abutment stability, which is in accordance with practice. Therefore, this model provides a new method for revealing the mechanical behavior of RCCD under the coupling field.

Viscoplastic Damage-Softening Constitutive Model for Concrete Subjected to Uniaxial Dynamic Compression

A new viscoplastic damage-softening constitutive model is presented. It is developed by integrating a Bodner-Partom viscoplastic model with a newdamage evolution equation. A set of ordinary differential equations（ ODEs） is formulated,and a Runge-Kutta integral method is used to get stress-strain curves given by the model. Also,stress-strain curves of a wide range of strain-rates for concrete were obtained by split Hopkinson pressure bar（ SHPB） tests. By fitting the integral stressstrain curves to the experimental ones with the least square optimization method,we determined the material parameters in our model. Some properties of the newmodel,such as strain-rate sensitivity,damage evolution characteristics,strain-rate jump effects and unloading feature,are explored.These results showthat our new model can describe dynamic behaviors of concrete very well,and our integrating-fitting-optimizing method to get material parameters is valid.

An Elastoplastic Damage Constitutive Model for Concrete

An elastoplastic damage constitutive model to simulate nonlinear behavior of concrete is presented. Similar to traditional plastic theory, the irreversible deformation is modeled in effective stress space. In order to better describe different stiffness degradation mechanisms of concrete under tensile and compressive loading conditions, two damage variables, i.e., tension and compression are introduced, to quantitatively evaluate the degree of deterioration of concrete structure. The rate dependent behavior is taken into account, and this model is derived firmly in the framework of irreversible thermodynamics. Fully implicit backward-Euler algorithm is suggested to perform constitutive integration. Numerical results of the model accord well with the test results for specimens under uniaxial tension and compression, biaxial loading and triaxial loading. Failure processes of double-edge-notched （DEN） specimen are also simulated to further validate the proposed model.

Damage Detection in Reinforced Concrete Berthing Jetty Using a Plasticity Model Approach

A conventional method of damage modeling by a reduction in stiffness is insufficient to model the complex non-linear damage characteristics of concrete material accurately.In this research,the concrete damage plasticity constitutive model is used to develop the numerical model of a deck beam on a berthing jetty in the Abaqus finite element package.The model constitutes a solid section of 3D hexahedral brick elements for concrete material embedded with 2D quadrilateral surface elements as reinforcements.The model was validated against experimental results of a beam of comparable dimensions in a cited literature.The validated beam model is then used in a three-point load test configuration to demonstrate its applicability for preliminary numerical evaluation of damage detection strategy in marine concrete structural health monitoring.The natural frequency was identified to detect the presence of damage and mode shape curvature was found sensitive to the location of damage.

The damage to model concrete gravity dams subjected to water explosions

Over the past century,the safety of dams has gradually attracted attention from all parties.Research on the dynamic response and damage evolution of dams under extreme loads is the basis of dam safety issues.In recent decades,scholars have studied the responses of dams under earthquake loads,but there is still much room for improvement in experimental and theoretical research on small probability loads such as explosions.In this paper,a 50-m-high concrete gravity dam is used as a prototype dam,and a water explosion model test of a 2.5-m-high concrete gravity dam is designed.The water pressure and the acceleration response of the dam body in the test are analysed.The pressure characteristics and dynamic response of the dam body are assessed.Taking the dam damage test as an example,a numerical model of concrete gravity dam damage is established,and the damage evolution of the dam body is analysed.By combining experiments and numerical simulations,the damage characteristics of the dam body under the action of different charge water explosions are clarified.The integrity of the dam body is well maintained under the action of a small-quantity water explosion,and the dynamic response of the dam body is mainly caused by the shock wave.Both the shock wave and the bubble pulsation cause the dam body to accelerate,and the peak acceleration of the dam body under the action of the bubble pulsation is only one percent of the peak acceleration of the dam body under the action of the shock wave.When subjected to explosions in large quantities of water,the dam body is seriously damaged.Under the action of a shock wave,the dam body produces a secondary acceleration response,which is generated by an internal interaction after the dam body is damaged.The damage evolution process of the dam body under the action of a large-scale water explosion is analysed,and it is found that the shock wave pressure of the water explosion causes local damage to the dam body facing the explosion.After the peak value of the shock wave,the impulse continues to act on the dam body,causing cumulative damage and damage inside the dam body.

Parameters Sensitivity Analysis and Correction for Concrete Damage Plastic Model

In order to understand the effect of hardening ductility parameters and softening ductility parameters of the concrete damage plastic model in LS-DYNA,a sensitivity and reliability analysis of these parameters through a convenient cube unit test was conducted. The results showed that the peak strength strain was independent of the hardening ductility parameter DH,but affected by AH,BH,and CH. The softening ductility was mainly related to the softening ductility parameter AS,but not affected by the damage ductility exponent BS. In case that the model with default parameters failed to match the AS-controlled damage softening phase,an optimized model with an AS correction was developed. The corrected model with the AS value of 2 matched well with the code model,and exhibited good feasibility in predicting the stress-strain curve of different grades of concrete. Moreover,the practicability of the corrected model was further validated by the conventional triaxial test. The simulated curve exhibited favorable consistence with the trial curve. Therefore,the model with parameter correction could provide a prospective reference for predicting the mechanical properties of concrete.

Non-local damage and fracture model of rock and concrete-like materials

In view of the non-local phenomena appearing in the rock and concrete-like materials, the non-local damage and fracture model of rock and concrete-like materials was established through non-local method of Gaussian weighting function. The result indicates that, the stress of one point in the material is correlated not only to its strain history, but also to the interaction of the points in its certain adjacent region of the material. Based on the established non-local model, the numerical simulation of notch containing three-point bending beam was carried out. The results show that the grid sensitivities have been avoided and the fracture direction of the material has not been influenced by the grid shape, and the model proposed can be used to better simulate the damage developing process of the rock and concrete-like materials.

The Behavior of Recycled Concrete through the Application of an Isotropic Damage Model

The main goal of this paper is to describe the mechanical behavior of the CDW recycled concrete in compression, using an isotropic damage model adapted to the variation of the replacement rate of natural aggregates by recycled ones. The isotropic model by Mazars was used as a constitutive equation for the CDW concrete and its adjustment parameters, A and B, were written as quadratic polynomials according to the aggregates replacement rate. The model was evaluated for conventional and recycled concretes. For the latter ones, the aggregates replacement ratios evaluated were 50% and 100%. The results show good approximation between the analytical and numerical values obtained with the adapted isotropic damage model and experimental concrete results for both compressive and flexural strength.

Numerical simulation of seismic damage and cracking of concrete slabs of high concrete face rockfill dams

Based on the damage constitutive model for concrete, the Weibull distribution function was used to characterize the random distribution of the mechanical properties of materials by finely subdividing concrete slab elements, and a concrete random mesoscopic damage model was established. The seismic response of a 100-m high concrete face rockfill dam(CFRD), subjected to ground motion with different intensities, was simulated with the three-dimensional finite element method(FEM), with emphasis on exploration of damage and the cracking process of concrete slabs during earthquakes as well as analysis of dynamic damage and cracking characteristics during strong earthquakes. The calculated results show that the number of damaged and cracking elements on concrete slabs grows with the duration of earthquakes. With increasing earthquake intensity, the damaged zone and cracking zone on concrete slabs grow wider. During a 7.0-magnitude earthquake, the stress level of concrete slabs is low for the CFRD, and there is almost no damage or slight damage to the slabs. While during a 9.0-magnitude strong earthquake, the percentages of damaged elements and macrocracking elements continuously ascend with the duration of the earthquake, peaking at approximately 26% and 5% at the end of the earthquake, respectively. The concrete random mesoscopic damage model can depict the entire process of sprouting, growing, connecting, and expanding of cracks on a concrete slab during earthquakes.

Damage assessment for seismic response of recycled concrete filled steel tube columns

A model for evaluating structural damage of recycled aggregate concrete filled steel tube （RCFST） columns under seismic effects is proposed in this paper. The proposed model takes the lateral deformation and the effect of repeated cyclic loading into account. Available test results were collected and utilized to calibrate the parameters of the proposed model. A seismic test for six RCFST columns was also performed to validate the proposed damage assessment model. The main test parameters were the recycled coarse aggregate （RCA） replacement percentage and the bond-slip property. The test results indicated that the seismic performance of the RCFST member depends on the RCA contents and their damage index increases as the RCA replacement percentage increases. It is also indicated that the damage degree of RCFST changes with the variation of the RCA replacement percentage. Finally, comparisons between the RCA contents, lateral deformation ratio and damage degree were implemented. It is suggested that an improvement procedure should be implemented in order to compensate for the performance difference between the RCFST and normal concrete filled steel tubes （CFST）.

Damage response of conventionally reinforced two-way spanning concrete slab under eccentric impacting drop weight loading

Reinforced concrete(RC)structures are generally designed to carry quasi-static gravity loads through almost indispensable components namely slab,however,it may be subjected to high intense loads induced from the impact of projectiles generated by the tornado,falling construction equipment,and also from accidental explosions during their construction and service lifespan.Impacts due to rock/boulder falls do occur on the structures located especially in hilly areas.Such loadings are not predictable but may cause severe damage to the slab/structure.It stimulates structural engineers and researchers to investigate and understand the dynamic response of RC structures under such impulsive loading.This research work first investigates the performance of 1000×1000×75 mm^(3)conventionally reinforced two-way spanning normal strength concrete slab with only tension reinforcement(0.88%)under the concentric impact load(1035 N)using the finite element method based computer code,ABAQUS/Explicit-v.6.15.The impact load is delivered to the centroid of the slab using a solid-steel cylindroconical impactor(drop weight)with a flat nose of diameter 40 mm,having a total mass of 105 kg released from a fixed height of 2500 mm.Two popular concrete constitutive models in ABAQUS namely;Holmquist-Johnson-Cook(HJC)and Concrete Damage Plasticity(CDP),with strain rate effects as per fib MODEL CODE 2010,are used to model the concrete material behavior to impact loading and to simulate the damage to the slab.The slab response using these two models is analyzed and compared with the impact test results.The strain rate effect on the reinforcing steel bars has been incorporated in the analysis using the Malvar and Crawford(1998)approach.A classical elastoplastic kinematic idealization is considered to model the steel impactor and support system.Results reveal that the HJC model gives a little overestimation of peak displacement,maximum acceleration,and damage of the slab while the predictions given by the CDP model are in reasonable agreement with the experimental test results/observations available in the open literature.Following the validation of the numerical model,analyses have been extended to further investigate the damage response of the slab under eccentric impact loadings.In addition to the concentric location(P1)of the impacting device,five locations on a quarter of the slab i.e.,two along the diagonal(P2&P3),the other two along the mid-span(P4&P5),and the last one(P6)between P3 and P5,covering the entire slab,are considered.Computational results have been discussed and compared,and the evaluation of the most damaging location(s)of the impact is investigated.It has been found that the most critical location of the impact is not the centroid of the slab but the eccentric one with the eccentricity of 1/6th of the span from the centroid along the mid-span section.

Effect of Reinforcement Corrosion Sediment Distribution Characteristics on Concrete Damage Behavior

Reinforcement corrosion directly affects the mechanical behavior of reinforced concrete structures.An electric corrosion test was conducted on a reinforced concrete test specimen,and a finite element model of the reinforcement corrosion damage was established.In addition,the damage behavior of reinforced concrete under different corrosion sediment distribution characteristics and different corrosion rates was studied.It was noted that when corrosion sediments are in a“semiellipse+semicircle”distribution,the results of numerical calculation are consistent with those obtained experimentally,reflecting the damage characteristics of reinforced concrete test specimens.Further,the results showed that the distribution characteristics of corrosion sediments greatly influence the damage behavior of reinforced concrete.In particular,when the corrosion sediments demonstrate a“semiellipse”distribution,reinforced concrete members may easily suffer from reinforcement damages.In the case of“semiellipse+semicircle”and“circle”distributions,the cohesive force between the reinforcements and concrete decreases:With the same corrosion rate,the damaged area expands with the increase in the number of reinforcements,which indicates a reduction in the cohesive force and thus,a reduction in the damage in the reinforcement area.This paper analyzes in-depth the effects of reinforcement corrosion expansion on the concrete damage behavior,provides references for practical engineering.

THE DAMAGE PROCESS ZONE CHARACTERISTICS AT CRACK TIP IN CONCRETE

This paper presents a comprehensive derivation of fracture process zone size which closely parallels similar work in fracture of metals and anisotropic solid, but is adapted to conrete. Some nonlinear mechanics models of concrete materials will be discussed by using uniaxial stress assumptions. For uniaxial stress assumption, energy model and fracture model will be presented for nonlinear softening models. Finally, we make a comparison with those models.

Experimental investigation on dynamic response and damage models of circular RC columns subjected to underwater explosions

Reinforced concrete(RC) columns are widely used as supporting structures for high-piled wharfs.The study of damage model of a RC column due to underwater explosion is a critical issue to assess the wharfs antiknock security.In this study,the dynamic response and damage model of circular RC columns subjected to underwater explosions were investigated by means of scaled-down experiment models.Experiments were carried out in a 10.0 m diameter tank with the water depth of 2.25 m,under different explosive quantities(0.025 kg-1.6 kg),stand-off distances(0.0 m-7.0 m),and detonation depths(0.25 m-2.0 m).The shock wave load and dynamic response of experiment models were measured by configuring sensors of pressure,acceleration,strain,and displacement.Then,the load distribution characteristics,time history of test data,and damage models related to present conditions were obtained and discussed.Three damage models,including bending failure,bending-shear failure and punching failure,were identified.In addition,the experie nce model of shock wave loads on the surface of a RC column was proposed for engineering application.

A unified stochastic damage model for concrete based on multi-scale energy dissipation analysis

This work proposes a unified damage model for concrete within the framework of stochastic damage mechanics. Based on the micro-meso stochastic fracture model(MMSF), the nonlinear energy dissipation process of the microspring from nanoscale to microscale is investigated. In nanoscale, the rate process theory is adopted to describe the crack growth rate;therefore, the corresponding energy dissipation caused by a representative crack propagation can be obtained. The scale gap from nanoscale to microscale is bridged by a crack hierarchy model. Thus, the total energy dissipated by all cracks from the nanoscale to the microscale is gained. It is found that the fracture strain of the microspring can be derived from the above multi-scale energy dissipation analysis. When energy dissipation is regarded as some microdamage to the microspring, the constitutive law of the microspring is no longer linearly elastic, as previously assumed. By changing the expression of the damage evolution law from fracture strain to energy dissipation threshold, the new damage evolution model is derived. The proposed model can not only replicate the original static model but also extend to cases of rate dependence. By deriving the fracture strain under different strain rates, the rate sensitivity of concrete materials can be reflected. The model parameters can be conveniently obtained by identifying them with experimental data. Finally, several numerical examples are presented to verify the proposed model.

Safety Performance of a Precast Concrete Barrier: Numerical Study

The numerical simulation for a new type of precast concrete barrier for viaducts is carried out systematically.To obtain an accurate representation of the damage state of the concrete barrier under the impact of a vehicle,a stochastic damage-plasticity model of the concrete is adopted in the finite element model.Meanwhile,a simplified mathematical model of the impact between vehicles and the concrete barrier was established and the input energy was converted to the impact load to facilitate the investigation of the safety performance of the concrete barriers.On this basis,a refined finite element(FE)model of a precast concrete barrier was developed.The impact locations,impact load,boundary constraints,and reinforcement types were used as variables and the dynamic response of the precast concrete barrier was systematically analyzed under 36 working conditions.The simulated results indicated that the damage state of the concrete barrier and the stress of the reinforcing bars were accurately and quantitatively reflected.According to the computed results,some suggestions were put forward for selecting the appropriate reinforcement type of the precast concrete barrier and the connection between the superstructure and foundation.

Seismic stability analysis of concrete gravity dams with penetrated cracks

The seismic stability of a cracked dam was examined in this study. Geometric nonlinearity and large deformations, as well as the contact condition at the crack site, were taken into consideration. The location of penetrated cracks was first identified using the concrete plastic-damage model based on the nonlinear finite element method （FEM）. Then, the hard contact algorithm was used to simulate the crack interaction in the normal direction, and the Coloumb friction model was used to simulate the crack interaction in the tangential direction. After verification of numerical models through a case study, the seismic stability of the Koyna Dam with two types of penetrated cracks is discussed in detail with different seismic peak accelerations, and the collapse processes of the cracked dam are also presented. The results show that the stability of the dam with two types of penetrated cracks can be ensured in an earthquake with a magnitude of the original Koyna earthquake, and the cracked dam has a large earthquake-resistant margin. The failure processes of the cracked dam in strong earthquakes can be divided into two stages： the sliding stage and the overturning stage. The sliding stage ends near the peak acceleration, and the top block slides a long distance along the crack before the collapse occurs. The maximum sliding displacement of the top block will decrease with an increasing friction coefficient at the crack site.