Microtremor-based analysis of the dynamic response characteristics of a site containing grouped earth fissures

In this study,the Beibu earth fissure site in the northeastern part of Weihe Basin,which contains four nearly parallel earth fissures,was studied.A long straight microtremor measuring line,containing 49 measuring points across four earth fissures,was established to investigate the dynamic response of this site using Fourier spectrum,response acceleration spectrum,Arias intensity,and HVSR analyses.The main results are as follows:(1)The fundamental frequencies of 44 measuring points obtained from HVSR analysis are concentrated within 1.67 Hz-2.25 Hz,and the existence of the earth fissures has little effect on the fundamental frequency changes.(2)There is an amplification effect near a single earth fissure.The dynamic responses are large at the measuring points near the earth fissure,and the values decrease with increasing distance from the earth fissure.In areas between two adjacent earth fissures,these values decrease and are even lower than those in sites without amplification effects.(3)In this earth fissure site,the general area(or less affected area)and affected areas were delineated based on the amplification effect.In engineering applications,construction design should avoid these affected areas and existing structures should be reinforced to satisfy the seismic fortification requirements.

Investigation on regional attenuation of Vrancea (Romania) intermediate-depth earthquakes

This paper aims at investigating possible regional attenuation patterns in the case of Vrancea（Romania） intermediate-depth earthquakes.Almost 500 pairs of horizontal components recorded during 13 intermediate-depth Vrancea earthquakes are employed in order to evaluate the regional attenuation patterns.The recordings are grouped according to the azimuth with regard to the Vrancea seismic source and subsequently,Q models are computed for each azimuthal zone assuming similar geometrical spreading.Moreover,the local soil amplification which was disregarded in a previous analysis performed for Vrancea intermediate-depth earthquakes is now clearly evaluated.The results show minor differences between the four regions situated in front of the Carpathian Mountains and considerable differences in attenuation of seismic waves between the forearc and backarc regions（with regard to the Carpathian Mountains）.Consequently,an average Q model of the type Q（f） = 115×f^1.25 is obtained for the four forearc regions,while a separate Q model of the type Q（f） = 70×f^0.90 is computed for the backarc region.These results highlight the need to evaluate the seismic hazard of Romania by using ground motion models which take into account the different attenuation between the forearc/backarc regions.

New Explorations on Cannon's Contributions and Generalized Solutions for Uniform Linear Motion Blur Identification

Existing frequency-domain-oriented methods of parameter identification for uniform linear motion blur （ULMB） images usually dealt with special scenarios. For example, blur-kernel directions were horizontal or vertical, or degraded images were of foursquare dimension. This excludes those identification methods from being applied to real images, especially to estimate undersized or oversized blur kernels. Pointing against the limitations of blur-kernel identifications, discrete Fourier transform （DFT）-based blur-kernel estimation methods are proposed in this paper. We analyze in depth the Fourier frequency response of generalized ULMB kernels, demonstrate in detail its related phase form and properties thereof, and put forward the concept of quasi-cepstrum. On this basis, methods of estimating ULMB-kernel parameters using amplitude spectrum and quasi-cepstrum are presented, respectively. The quasi-cepstrum-oriented approach increases the identifiable blur-kernel length, up to a maximum of half the diagonal length of the image. Meanwhile, directing toward the image of undersized ULMB, an improved method based on quasi-cepstrum is presented, which ameliorates the identification quality of undersized ULMB kernels. The quasi-cepstrum-oriented approach popularizes and applies the simulation-experiment- focused DFT theory to the estimation of real ULMB images. Compared against the amplitude-spectrum-oriented method, the quasi-cepstrum-oriented approach is more convenient and robust, with lower identification errors and of better noiseimmunity.