THE FOURTH-ORDER CUMULANTS BASED SPECTRALESTIMATION METHOD AND ITS APPLICATIONTO DIRECTION-FINDING

Traditional approaches of spatial spectral estimation are usually based on the second-order statistics. The higher-order cumulants and the poly-spectrum contain more information and are capable of reducing the Gaussian noise. In this paper, we present a new spectrum estimation method for direction-finding, the FOMUSIC algorithm, which is based on the eigen-structure analysis of the fourth-order cumulants. The derivation of the algorithm is given in detail and its performance is illustrated by both the computer simulations and the experiments of a direction-finding system. The obtained results demonstrate that the fourth-order cumulants based method outperforms the traditional methods, especially when the noise is an unknown colored one.

Array gain of fourth-order cumulants beamforming under typical probability density background

The fourth-order cumulant of zero mean Gaussian distribution noise always equals to zero theoretically. In practice the probability density of noise and reverberation is the key problem to performance of the fourth-order cumulant beamforming technique. In this paper, the array gain functions of the fourth-order cumulant beamforming are deducted considering the instantaneous amplitude distribution of the ambient sea noise and bottom reverberation respectively. And the relationships are determined between array gain and the factors including the number of the array elements, the fourth-order and second-order statistical properties of the noise and reverberation, and the input signal-to-noise ratio. It is also verified that there is a critical signal-to-interference ratio and the fourth-order cumulant beamforming can obtain higher gain and resolution than the conventional beamforming method when the ratio is larger than it. The results of experiment data processing demonstrate that the gain and the resolution of the fourth-order cumulant beamforming coincide with the theoretic.

Fourth-order phase-field modeling for brittle fracture in piezoelectric materials

Failure analyses of piezoelectric structures and devices are of engineering and scientific significance.In this paper,a fourth-order phase-field fracture model for piezoelectric solids is developed based on the Hamilton principle.Three typical electric boundary conditions are involved in the present model to characterize the fracture behaviors in various physical situations.A staggered algorithm is used to simulate the crack propagation.The polynomial splines over hierarchical T-meshes(PHT-splines)are adopted as the basis function,which owns the C1continuity.Systematic numerical simulations are performed to study the influence of the electric boundary conditions and the applied electric field on the fracture behaviors of piezoelectric materials.The electric boundary conditions may influence crack paths and fracture loads significantly.The present research may be helpful for the reliability evaluation of the piezoelectric structure in the future applications.

Existence of Monotone Positive Solution for a Fourth-Order Three-Point BVP with Sign-Changing Green’s Function

This paper is concerned with the following fourth-order three-point boundary value problem , where , we discuss the existence of positive solutions to the above problem by applying to the fixed point theory in cones and iterative technique.

Joint frequency, 2D AOA and polarization estimation using fourth-order cumulants

Based on fourth-order cumulant and ESPRIT algorithm, a novel joint frequency, two-dimensional angle of arrival (2D AOA) and the polarization estimation method of incoming multiple independent spatial narrow-band non-Gaussian signals in arbitrary Gaussian noise environment are proposed . The array is composed of crossed dipoles parallel to the coordinate axes. The crossed dipole positions are arbitrarily distributed. Computer simulation confirms its feasibility.

ALMOST SURE GLOBAL WELL-POSEDNESS FOR THE FOURTH-ORDER NONLINEAR SCHR?DINGER EQUATION WITH LARGE INITIAL DATA

We consider the fourth-order nonlinear Schr?dinger equation(4NLS)(i?t+εΔ+Δ2)u=c1um+c2(?u)um-1+c3(?u)2um-2,and establish the conditional almost sure global well-posedness for random initial data in Hs(Rd)for s∈(sc-1/2,sc],when d≥3 and m≥5,where sc:=d/2-2/(m-1)is the scaling critical regularity of 4NLS with the second order derivative nonlinearities.Our proof relies on the nonlinear estimates in a new M-norm and the stability theory in the probabilistic setting.Similar supercritical global well-posedness results also hold for d=2,m≥4 and d≥3,3≤m<5.

Cumulative effects of excess high-normal alanine aminotransferase levels in relation to new-onset metabolic dysfunction-associated fatty liver disease in China

BACKGROUND Within the normal range,elevated alanine aminotransferase(ALT)levels are associated with an increased risk of metabolic dysfunction-associated fatty liver disease(MAFLD).AIM To investigate the associations between repeated high-normal ALT measurements and the risk of new-onset MAFLD prospectively.METHODS A cohort of 3553 participants followed for four consecutive health examinations over 4 years was selected.The incidence rate,cumulative times,and equally and unequally weighted cumulative effects of excess high-normal ALT levels(ehALT)were measured.Cox proportional hazards regression was used to analyse the association between the cumulative effects of ehALT and the risk of new-onset MAFLD.RESULTS A total of 83.13%of participants with MAFLD had normal ALT levels.The incidence rate of MAFLD showed a linear increasing trend in the cumulative ehALT group.Compared with those in the low-normal ALT group,the multivariate adjusted hazard ratios of the equally and unequally weighted cumulative effects of ehALT were 1.651[95%confidence interval(CI):1.199-2.273]and 1.535(95%CI:1.119-2.106)in the third quartile and 1.616(95%CI:1.162-2.246)and 1.580(95%CI:1.155-2.162)in the fourth quartile,respectively.CONCLUSION Most participants with MAFLD had normal ALT levels.Long-term high-normal ALT levels were associated with a cumulative increased risk of new-onset MAFLD.

The Cumulative Method for Multiplication and Division

This paper provides a method of the process of computation called the cumulative method, it is based upon repeated cumulative process. The cumulative method is being adapted to the purposes of computation, particularly multiplication and division. The operations of multiplication and division are represented by algebraic formulas. An advantage of the method is that the cumulative process can be performed on decimal numbers. The present paper aims to establish a basic and useful formula valid for the two fundamental arithmetic operations of multiplication and division. The new cumulative method proved to be more flexible and made it possible to extend the multiplication and division based on repeated addition/subtraction to decimal numbers.

Non-Gaussianity detection of single-mode rotationally symmetric quantum states via cumulant method

The non-Gaussianity of quantum states incarnates an important resource for improving the performance of continuous-variable quantum information protocols.We propose a novel criterion of non-Gaussianity for single-mode rotationally symmetric quantum states via the squared Frobenius norm of higher-order cumulant matrix for the quadrature distribution function.As an application,we study the non-Gaussianities of three classes of single-mode symmetric non-Gaussian states:a mixture of vacuum and Fock states,single-photon added thermal states,and even/odd Schr¨odinger cat states.It is shown that such a criterion is faithful and effective for revealing non-Gaussianity.We further extend this criterion to two cases of symmetric multi-mode non-Gaussian states and non-symmetric single-mode non-Gaussian states.

Study on cumulative effects of biological craniocerebral trauma under repeated blast

Repeated blast impacts on personnel in explosive environments can exacerbate craniocerebral trauma.Most existing studies focus on the injury effects of a single blast,lacking in-depth analysis on the injury effects and cumulative effects of repeated blasts.Therefore,rats were used as the experimental samples to suffer from explosion blasts with different peak air overpressures(167 kPa~482 kPa)and varying number of repeated blasts.The cumulative effect of craniocerebral trauma was most pronounced for moderate repeated blast,showing approximately 95%increase of trauma severity with penta blast,and an approximately 85%increase of trauma severity with penta minor blast.The cumulative effect of craniocerebral trauma from severe,repeated blast has a smaller rate of change compared to the other two conditions.The severity of trauma from penta blast increased by approximately 69%compared to a single blast.Comprehensive physiological,pathological and biochemical analysis show that the degree of neurological trauma caused by repeated blasts is higher than that of single blasts,and the pathological trauma to brain tissue is more extensive and severe.The trauma degree remains unchanged after double blast,increases by one grade after triple or quadruple blast,and increases by two grades after penta blast.

Fourth-Order Predictive Modelling: II. 4th-BERRU-PM Methodology for Combining Measurements with Computations to Obtain Best-Estimate Results with Reduced Uncertainties

This work presents a comprehensive fourth-order predictive modeling (PM) methodology that uses the MaxEnt principle to incorporate fourth-order moments (means, covariances, skewness, kurtosis) of model parameters, computed and measured model responses, as well as fourth (and higher) order sensitivities of computed model responses to model parameters. This new methodology is designated by the acronym 4th-BERRU-PM, which stands for “fourth-order best-estimate results with reduced uncertainties.” The results predicted by the 4th-BERRU-PM incorporates, as particular cases, the results previously predicted by the second-order predictive modeling methodology 2nd-BERRU-PM, and vastly generalizes the results produced by extant data assimilation and data adjustment procedures.

Fourth-Order Predictive Modelling: I. General-Purpose Closed-Form Fourth-Order Moments-Constrained MaxEnt Distribution

This work (in two parts) will present a novel predictive modeling methodology aimed at obtaining “best-estimate results with reduced uncertainties” for the first four moments (mean values, covariance, skewness and kurtosis) of the optimally predicted distribution of model results and calibrated model parameters, by combining fourth-order experimental and computational information, including fourth (and higher) order sensitivities of computed model responses to model parameters. Underlying the construction of this fourth-order predictive modeling methodology is the “maximum entropy principle” which is initially used to obtain a novel closed-form expression of the (moments-constrained) fourth-order Maximum Entropy (MaxEnt) probability distribution constructed from the first four moments (means, covariances, skewness, kurtosis), which are assumed to be known, of an otherwise unknown distribution of a high-dimensional multivariate uncertain quantity of interest. This fourth-order MaxEnt distribution provides optimal compatibility of the available information while simultaneously ensuring minimal spurious information content, yielding an estimate of a probability density with the highest uncertainty among all densities satisfying the known moment constraints. Since this novel generic fourth-order MaxEnt distribution is of interest in its own right for applications in addition to predictive modeling, its construction is presented separately, in this first part of a two-part work. The fourth-order predictive modeling methodology that will be constructed by particularizing this generic fourth-order MaxEnt distribution will be presented in the accompanying work (Part-2).

Wigner function of optical cumulant operator and its dissipation in thermo-entangled state representation

To conveniently calculate the Wigner function of the optical cumulant operator and its dissipation evolution in a thermal environment, in this paper, the thermo-entangled state representation is introduced to derive the general evolution formula of the Wigner function, and its relation to Weyl correspondence is also discussed. The method of integration within the ordered product of operators is essential to our discussion.

Cumulative Air Quality Impacts from Twenty-Two Major Power Plants

Cumulative assessment is a tool for the project developer to try and take into consideration not only their contribution to cumulative impacts but also other projects and external factors that may place their developments at risk.This study assessed the cumulative impacts of air emissions from 22 major power plants in southeast Bangladesh planned to generate 21,550 MW of electricity.It also includes anticipated growth in small to medium size industries,brickfields,highway traffic,inland water transport,transhippers,jetty,and vessel transports used for transporting fuel resources for these power plants.A 50 km by 50 km airshed is considered for air quality modeling.Cumulative analysis indicates that predicted MGLCs(Maximum Ground Level Concentrations)of NO2 and CO are complying with both Bangladesh NAAQS(National Ambient Air Quality Standards)and WBG(World Bank Group)Guidelines.The daily average MGLC of PM_(2.5)(62.45µg/m^(3))from all sources complies with NAAQS,however,exceeds the WBG Guidelines.Annual PM_(2.5) concentration(15.45µg/m^(3))exceeds NAAQS and WBG Guidelines.The PM10 concentration complies with the NAAQS for both 24-hour and annual averaging times.Annual average concentration(23.12µg/m^(3))exceeds WBG Guidelines.Daily average SO2 concentration(102.49µg/m^(3))complies with the NAAQS however,it exceeds the WBG guideline values.High concentrations of PM_(2.5) and SO2 are due to the contribution of transboundary emissions and secondary pollutants in the atmosphere.This dispersion modeling outcome can be used by the policymakers for the pollution reduction strategy.

Joint estimation of DOA, frequency, and polarization based on cumulants and UCA

A joint estimation algorithm of direction of arrival （DOA）, frequency, and polarization, based on fourth-order cumulants and uniform circular array （UCA） of trimmed vector sensors is presented for narrowband non-Gaussian signals. The proposed approach, which is suitable for applications in arbitrary Gaussian noise environments, gives a closed-form representation of the estimated parameters, without spectral peak searching. An efficient method is also provided for elimination of cyclic phase ambiguities. Simulations are presented to show the performance of the algorithm.

Polynomial-rooting based fourth-order MUSIC for direction-of-arrival estimation of noncircular signals

A polynomial-rooting based fourth-order cumulant algorithm is presented for direction-of-arrival（DOA） estimation of second-order fully noncircular source signals, using a uniform linear array（ULA）. This algorithm inherits all merits of its spectralsearching counterpart except for the applicability to arbitrary array geometry, while reducing considerably the computation cost.Simulation results show that the proposed algorithm outperforms the previously developed closed-form second-order noncircular ESPRIT method, in terms of processing capacity and DOA estimation accuracy, especially in the presence of spatially colored noise.

Existence of solutions and positive solutions to a fourth-order two-point BVP with second derivative

Several existence theorems were established for a nonlinear fourth-order two-point boundary value problem with second derivative by using Leray-Schauder fixed point theorem, equivalent norm and technique on system of integral equations. The main conditions of our results are local. In other words, the existence of the solution can be determined by considering the height of the nonlinear term on a bounded set. This class of problems usually describes the equilibrium state of an elastic beam which is simply supported at both ends.

An Efficient Technique for Finding the Eigenvalues of Fourth-Order Sturm-Liouville Problems

In this work, we present a computational method for solving eigenvalue problems of fourth-order ordinary differential equations which based on the use of Chebychev method. The efficiency of the method is demonstrated by three numerical examples. Comparison results with others will be presented.

POSITIVE SOLUTIONS OF FOURTH-ORDER ORDINARY DIFFERENTIAL EQUATIONS

Under suitable conditions on h(x) and f(u), the authors show that the following boundary value problem has at least one positive solution. Moreover, the authors also establish several existence theorems of multiple positive solutions.

Superlinear Fourth-order Elliptic Problem without Ambrosetti and Rabinowitz Growth Condition

This paper deals with superlinear fourth-order elliptic problem under Navier boundary condition. By using the mountain pass theorem and suitable truncation, a multiplicity result is established for all λ〉 0 and some previous result is extended.