Mechanisms of carbon isotopic fractionation in the process of natural gas generation: Geochemical evidence from thermal simulation experiment

Low maturity coal samples were taken from the Ordos Basin to conduct gold tube thermal simulation experiment in a closed system,and the characteristics of the products were analyzed to find out the fractionation mechanism of carbon isotopes and the causes of abnormal carbon isotopic compositions of natural gas.At the heating rates of 2℃/h(slow)and 20℃/h(rapid),the low maturity coal samples of the Ordos Basin had the maximum yields of alkane gas of 302.74 mL/g and 230.16 mL/g,theδ13C1 ranges of-34.8‰to-23.6‰and-35.5‰to-24.0‰;δ13C2 ranges of-28.0‰to-9.0‰and-28.9‰to-8.3‰;andδ13C3 ranges of-25.8‰to-14.7‰and-26.4‰to-13.2‰,respectively.Alkane gas in the thermal simulation products of rapid temperature rise process showed obvious partial reversal of carbon isotope series at 550℃,and at other temperatures showed positive carbon isotope series.In the two heating processes,theδ13C1 turned lighter first and then heavier,and the non-monotonic variation of theδ13C1 values is because the early CH4 is from different parent materials resulted from heterogeneity of organic matter or the carbon isotope fractionation formed by activation energy difference of early enriched 12CH4 and late enriched 13CH4.The reversal of carbon isotope values of heavy hydrocarbon gas can occur not only in high to over mature shale gas(oil-type gas),but also in coal-derived gas.Through thermal simulation experiment of toluene,it is confirmed that the carbon isotope value of heavy hydrocarbon gas can be reversed and inversed at high to over mature stage.The isotope fractionation effect caused by demethylation and methyl linkage of aromatic hydrocarbons may be an important reason for carbon isotope inversion and reversal of alkane gas at the high to over mature stage.

Experimental study on stable isotopic fractionation of evaporating water under varying temperature

The variation of stable isotope ratios in natural waters provides valuable information that can be used to trace water movement. Evaporation plays a crucial role in determining the variation of stable isotopes. In this paper, several evaporation experiments were conducted in order to study the stable isotopic fractionation mechanism of water and analyze the influence of different temperatures on evaporation fractionation. Three group experiments of water evaporation under different temperatures and initial isotopic values were carried out. The results show that fractionation factors of hydrogen and oxygen may increase with temperature, and the average enrichment degree of hydrogen isotope D is 3.432 times that of oxygen isotope 18O. The results also show that the isotopic composition of the initial water has little influence on water evaporation fractionation, which is mainly affected by the state variables in the evaporation process, such as temperature. This research provides experimental data for further understanding the evaporation fractionation mechanism.

Hydrogen and Oxygen Isotope Fractionation Mechanism in the Hydrothermal System and Its Geologic Significance

The geochemical behaviors of hydrogen and oxygen isotopes in the hydrothermal system and their inher-ent relationship with the water / rock exchange are discussed in this paper In addition to the temperature con-ditions, the effective W / R ratio is another factor controlling the changes in H and O isotope compositions ofthe altered rock and hydrothermal water. Besides, the application and geological significance of the water-rockexchange theory are also discussed in the light of the H and O isotope compositions and their variation charac-teristics of the mineralizing hydrothermal water and altered rocks from several mineral deposits. Finally, abrief evolutional model of H and O istotope compositions of meteoric and magmatic hydrothermal waters in ahydrothermal system is given.

Fractionation mechanism of iron isotopes in highly fractionated granites from the Xinxian Pluton,Western Dabie Orogen,Central China

Iron isotopes are important for tracing the magmatic process.The fractionation of iron isotopes in granite is up to 0.55‰.In this study,Wangjiagou(XWJ)granite and Tayueping(XTY)granite in the Xinxian pluton of the Western Dabie orogen were evaluated.Both the XTY and XWJ granite belong to monzogranites,with high SiO2(74.42-76.82 wt.%)contents.The granites are depleted of Nb and Ti but enriched with Pb and K,and they display negative Eu anomalies(Eu/Eu^(*)=0.40-0.52)on REE plots that are normalized by chondrite.Theδ^(56)Fe values of the XTY granites vary from 0.19±0.03‰to0.27±0.04‰,and theδ^(56)Fe values of the XWJ granites are 0.34±0.02‰and 0.36±0.01‰,respectively.Both the XTY and the XWJ granites belong to highly fractionated granites due to their SI(solidification index),DI(differentiation index),and content of CaO.Evidence from the iron isotopes shows that neither fluid exsolution,alteration,weathering,nor partial melting can explain the enrichment of the heavy iron isotopes.The results modeled using the Rayleigh equation showed that fractional crystallization can produceΔ^(56)Femelt-crystalwith the value of0.08-0.15‰.In conclusion,fractional crystallization was the main factor controlling the fractionation of iron isotopes,and the change of melt composition may also lead to the enrichment of heavy iron isotopes in the residual melt.

Intermittent disturbance mechanical behavior and fractional deterioration mechanical model of rock under complex true triaxial stress paths

Mechanical excavation,blasting,adjacent rockburst and fracture slip that occur during mining excavation impose dynamic loads on the rock mass,leading to further fracture of damaged surrounding rock in three-dimensional high-stress and even causing disasters.Therefore,a novel complex true triaxial static-dynamic combined loading method reflecting underground excavation damage and then frequent intermittent disturbance failure is proposed.True triaxial static compression and intermittent disturbance tests are carried out on monzogabbro.The effects of intermediate principal stress and amplitude on the strength characteristics,deformation characteristics,failure characteristics,and precursors of monzogabbro are analyzed,intermediate principal stress and amplitude increase monzogabbro strength and tensile fracture mechanism.Rapid increases in microseismic parameters during rock loading can be precursors for intermittent rock disturbance.Based on the experimental result,the new damage fractional elements and method with considering crack initiation stress and crack unstable stress as initiation and acceleration condition of intermittent disturbance irreversible deformation are proposed.A novel three-dimensional disturbance fractional deterioration model considering the intermediate principal stress effect and intermittent disturbance damage effect is established,and the model predicted results align well with the experimental results.The sensitivity of stress states and model parameters is further explored,and the intermittent disturbance behaviors at different f are predicted.This study provides valuable theoretical bases for the stability analysis of deep mining engineering under dynamic loads.

Mechanism of Fractional Melting in the Splashed Coating on BOF Lining

With the self-made equipment, the benavior of the splashed slag coating was studied by the thermo-simulation. The influenceof TFe, basicity and heating rate of slag on the occurrence of fractional melting was investigated. Furthermore, the composition variationof slag in different stages of the heating process was also discussed, and the mechanism of fractional me1ting was explained. In addition,the exploitation of this phenomenon in practice was also discussed.

Rock-forming mechanism of Fenghuangshan rockbody in Tongling area

Based on the detailed geological investigation and record of galleries and drill holes, a new idea has been advanced that granodiorite is earlier than quartz monzodiorite porphyry. Both of them are products of two different magmatic intrusive activities. The analysis results of trace elements show that the Sr content is beyond any other crustal rock and the Th content is beyond that of Ta. The whole-rock analysis indicates that rockbody is rich in CaO and poor in K2O. In the composition of Pb istope of rockbody, the ratio of 207 Pb to 204Pb is less than 15. 60. All these show that the magma mainly comes from the upper mantle. Ti,Zr,Cr,Nb trace elements and the relation between the Gardini index(τ) and the Rittmann index(σ) indicate that the rockbodies are formed in the orogenic belt and island arc tectonic setting. The summation (2REE) and the characteristic value(m( La)/m( Yb)) of the rare earth elements show that the original rock is alkalic basalt. The analysis of the characteristic values of REE and the quantitative modeling calculation indicate that the rock-forming process is dominated by mixed crystallization. According to the analysis on the rock-forming order, magmatic source, tectonic setting and rock-forming process, combined with the achievements of regional rock-controlling structures and division of sublayer of crust, it is believed that Fenghuangshan rock body derives from the deep-seated alkalic basalt magma. The rock-forming process has undertaken sialic and calcareous assimilation and contamination of two different degrees. The rock-forming model belongs to the typical assimilation and fractional cryatalization mechanism.

An Approach to Differential Geometry of Fractional Order via Modified Riemann-Liouville Derivative

In order to cope with some difficulties due to the fact that the derivative of a constant is not zero with the commonly accepted Riemann-Liouville definition of fractional derivative, one （Jumarie） has proposed recently an alternative referred to as （local） modified Riemann-Liouville definition, which directly, provides a Taylor＇s series of fractional order for non differentiable functions. We examine here in which way this calculus can be used as a framework for a differential geometry of fractional or- der. One will examine successively implicit function, manifold, length of curves, radius of curvature, Christoffel coefficients, velocity, acceleration. One outlines the application of this framework to La- grange optimization in mechanics, and one concludes with some considerations on a possible fractional extension of the pseudo-geodesic of thespecial relativity and of the Lorentz transformation.

Treatability of volatile chlorinated hydrocarbon-contaminated soils of different textures along a vertical profile by mechanical soil aeration：A laboratory test

Mechanical soil aeration is a simple, effective, and low-cost soil remediation technology that is suitable for sites contaminated with volatile chlorinated hydrocarbons（VCHs）. Conventionally, this technique is used to treat the mixed soil of a site without considering the diversity and treatability of different soils within the site. A laboratory test was conducted to evaluate the effectiveness of mechanical soil aeration for remediating soils of different textures（silty,clayey, and sandy soils） along a vertical profile at an abandoned chloro-alkali chemical site in China. The collected soils were artificially contaminated with chloroform（TCM） and trichloroethylene（TCE）. Mechanical soil aeration was effective for remediating VCHs（removal efficiency 〉 98%）. The volatilization process was described by an exponential kinetic function.In the early stage of treatment（0–7 hr）, rapid contaminant volatilization followed a pseudofirst order kinetic model. VCH concentrations decreased to low levels and showed a tailing phenomenon with very slow contaminant release after 8 hr. Compared with silty and sandy soils, clayey soil has high organic-matter content, a large specific surface area, a high clay fraction, and a complex pore structure. These characteristics substantially influenced the removal process, making it less efficient, more time consuming, and consequently more expensive. Our findings provide a potential basis for optimizing soil remediation strategy in a cost-effective manner.