A resilience-incorporated risk assessment framework is proposed and demonstrated in this study to manifest the advantageous seismic resilience of precast concrete frame(PCF)structures with“dry”connections in terms o...A resilience-incorporated risk assessment framework is proposed and demonstrated in this study to manifest the advantageous seismic resilience of precast concrete frame(PCF)structures with“dry”connections in terms of their low damage and rapid recovery.The framework integrates various uncertainties in the seismic hazard,fragility,capacity,demand,loss functions,and post-earthquake recovery.In this study,the PCF structures are distinguished from ordinary reinforced concrete frame(RCF)structures by characterizing multiple limit states for the PCF based on its unique damage mechanisms.Accordingly,probabilistic story-wise pushover analyses are performed to yield story-wise capacities for the predefined limit states.In the seismic resilience analysis,a step-wise recovery model is proposed to idealize the functionality recovery process,with separate considerations of the repair and non-repair events.The recovery model leverages the economic loss and downtime to delineate the stochastic post-earthquake recovery curves for the resilience loss estimation.As such,contingencies in the probabilistic post-earthquake repairs are incorporated and the empirical judgments on the recovery parameters are largely circumvented.The proposed framework is demonstrated through a comparative study between two“dry”connected PCFs and one RCF designed as alternative structural systems for a prototype building.The results from the risk quantification indicate that the PCFs show reduced loss hazards and lower expected losses relative to the RCF.Particularly,the PCF equipped with energy dissipation devices at the“dry”connections largely reduces the expected economic loss,downtime,and resilience loss by 29%,56%,and 60%,respectively,compared to the RCF.展开更多
H-steel all-bolted connection steel frame structures with heat preservation and decoration composite wall boards were investigated and the seismic performances of three scaled specimens were studied.The failure modes,...H-steel all-bolted connection steel frame structures with heat preservation and decoration composite wall boards were investigated and the seismic performances of three scaled specimens were studied.The failure modes,hysteresis curves,bearing capacity,ductility,energy dissipation capacity,stiffness degradation and strain distribution were discussed.The calculation method of structural theoretical internal force was presented.The results showed that the overall structural seismic performance was better,and the structural ductility met the demands of elastic-plastic inter-story drift angle for seismic design.The H-steel weak-axis connection structure obtained better energy dissipation capacity,and its bearing capacity and stiffness were slightly different from the strong-axis connection.The heat preservation and decoration performance of composite wallboard and the all-bolted connection of the steel frame realized prefabrication during the whole construction period.The plastic hinge of the steel beam can be moved outwards because of the L-angles,which effectively avoids stress concentration in joint areas and expands the plastic hinge range.The errors between the theoretical structural capacity calculated by the plastic analysis method and the test results were within 2.44%.In addition,structural failure mechanisms and bearing capacities were verified by the finite element(FE)analysis,and the effects of the main parameters on the structures were investigated.The FE verification results were the same as in the test.The research results provide theoretical support and technical guidance for the application of thermal insulation and decorative composite wall panels in H-shaped steel all-bolted steel frames.展开更多
Due to the interdependency of frame synchronization(FS)and channel estimation(CE),joint FS and CE(JFSCE)schemes are proposed to enhance their functionalities and therefore boost the overall performance of wireless com...Due to the interdependency of frame synchronization(FS)and channel estimation(CE),joint FS and CE(JFSCE)schemes are proposed to enhance their functionalities and therefore boost the overall performance of wireless communication systems.Although traditional JFSCE schemes alleviate the influence between FS and CE,they show deficiencies in dealing with hardware imperfection(HI)and deterministic line-of-sight(LOS)path.To tackle this challenge,we proposed a cascaded ELM-based JFSCE to alleviate the influence of HI in the scenario of the Rician fading channel.Specifically,the conventional JFSCE method is first employed to extract the initial features,and thus forms the non-Neural Network(NN)solutions for FS and CE,respectively.Then,the ELMbased networks,named FS-NET and CE-NET,are cascaded to capture the NN solutions of FS and CE.Simulation and analysis results show that,compared with the conventional JFSCE methods,the proposed cascaded ELM-based JFSCE significantly reduces the error probability of FS and the normalized mean square error(NMSE)of CE,even against the impacts of parameter variations.展开更多
Interactive holography offers unmatched levels of immersion and user engagement in the field of future display.Despite of the substantial progress has been made in dynamic meta-holography,the realization of real-time,...Interactive holography offers unmatched levels of immersion and user engagement in the field of future display.Despite of the substantial progress has been made in dynamic meta-holography,the realization of real-time,highly smooth interactive holography remains a significant challenge due to the computational and display frame rate limitations.In this study,we introduced a dynamic interactive bitwise meta-holography with ultra-high computational and display frame rates.To our knowledge,this is the first reported practical dynamic interactive metasurface holographic system.We spa-tially divided the metasurface device into multiple distinct channels,each projecting a reconstructed sub-pattern.The switching states of these channels were mapped to bitwise operations on a set of bit values,which avoids complex holo-gram computations,enabling an ultra-high computational frame rate.Our approach achieves a computational frame rate of 800 kHz and a display frame rate of 23 kHz on a low-power Raspberry Pi computational platform.According to this methodology,we demonstrated an interactive dynamic holographic Tetris game system that allows interactive gameplay,color display,and on-the-fly hologram creation.Our technology presents an inspiration for advanced dynamic meta-holography,which is promising for a broad range of applications including advanced human-computer interaction,real-time 3D visualization,and next-generation virtual and augmented reality systems.展开更多
This paper presents an investigation of the seismic behavior of reinforced concrete(RC)structures in which shear walls are the main lateral load-resisting elements and the participation of flat slab floor systems is n...This paper presents an investigation of the seismic behavior of reinforced concrete(RC)structures in which shear walls are the main lateral load-resisting elements and the participation of flat slab floor systems is not considered in the seismic design procedure.In this regard,the behavior of six prototype structures(with different heights and plan layouts)is investigated through nonlinear static and time history analyses,implemented in the OpenSees platform.The results of the analyses are presented in terms of the behavior of the slab-column connections and their mode of failure at different loading stages.Moreover,the global response of the buildings is discussed in terms of some parameters,such as lateral overstrength due to the gravity flat slab-column frames.According to the nonlinear static analyses,in structures in which the slab-column connections were designed only for gravity loads,the slab-column connections exhibited a punching mode of failure even in the early stages of loading.However,the punching failure was eliminated in structures in which a minimum transverse reinforcement recommended in ACI 318(2019)was provided in the slabs at joint regions.Furthermore,despite neglecting the contribution of gravity flat slab-column frames in the lateral load resistance of the structures,a relatively significant overstrength was imposed on the structures by the gravity frames.展开更多
The deteriorated continuous rigid frame bridge is strengthened by external prestressing. Static loading tests wereconducted before and after the bridge rehabilitation to verify the effectiveness of the rehabilitation ...The deteriorated continuous rigid frame bridge is strengthened by external prestressing. Static loading tests wereconducted before and after the bridge rehabilitation to verify the effectiveness of the rehabilitation process. Thestiffness of the repaired bridge is improved, and the maximum deflection of the load test is reduced from 37.9 to27.6 mm. A bridge health monitoring system is installed after the bridge is reinforced. To achieve an easy assessmentof the bridge’s safety status by directly using transferred data, a real-time safety warning system is createdbased on a five-level safety standard. The threshold for each safety level will be determined by theoretical calculationsand the outcomes of static loading tests. The highest risk threshold will be set at the ultimate limit statevalue. The remaining levels, namely middle risk, low risk, and very low risk, will be determined usingreduction coefficients of 0.95, 0.9, and 0.8, respectively.展开更多
The fundamental frequency plays a significant part in understanding and perceiving the pitch of a sound. The pitch is a fundamental attribute employed in numerous speech-related works. For fundamental frequency extrac...The fundamental frequency plays a significant part in understanding and perceiving the pitch of a sound. The pitch is a fundamental attribute employed in numerous speech-related works. For fundamental frequency extraction, several algorithms have been developed which one to use relies on the signal’s characteristics and the surrounding noise. Thus, the algorithm’s noise resistance becomes more critical than ever for precise fundamental frequency estimation. Nonetheless, numerous state-of-the-art algorithms face struggles in achieving satisfying outcomes when confronted with speech recordings that are noisy with low signal-to-noise ratio (SNR) values. Also, most of the recent techniques utilize different frame lengths for pitch extraction. From this point of view, This research considers different frame lengths on male and female speech signals for fundamental frequency extraction. Also, analyze the frame length dependency on the speech signal analytically to understand which frame length is more suitable and effective for male and female speech signals specifically. For the validation of our idea, we have utilized the conventional autocorrelation function (ACF), and state-of-the-art method BaNa. This study puts out a potent idea that will work better for speech processing applications in noisy speech. From experimental results, the proposed idea represents which frame length is more appropriate for male and female speech signals in noisy environments.展开更多
A two-stage automatic key frame selection method is proposed to enhance stitching speed and quality for UAV aerial videos. In the first stage, to reduce redundancy, the overlapping rate of the UAV aerial video sequenc...A two-stage automatic key frame selection method is proposed to enhance stitching speed and quality for UAV aerial videos. In the first stage, to reduce redundancy, the overlapping rate of the UAV aerial video sequence within the sampling period is calculated. Lagrange interpolation is used to fit the overlapping rate curve of the sequence. An empirical threshold for the overlapping rate is then applied to filter candidate key frames from the sequence. In the second stage, the principle of minimizing remapping spots is used to dynamically adjust and determine the final key frame close to the candidate key frames. Comparative experiments show that the proposed method significantly improves stitching speed and accuracy by more than 40%.展开更多
The most valuable resource on the planet is no longer oil,but data.The transmission of this data securely over the internet is another challenge that comes with its ever-increasing value.In order to transmit sensitive...The most valuable resource on the planet is no longer oil,but data.The transmission of this data securely over the internet is another challenge that comes with its ever-increasing value.In order to transmit sensitive information securely,researchers are combining robust cryptography and steganographic approaches.The objective of this research is to introduce a more secure method of video steganography by using Deoxyribonucleic acid(DNA)for embedding encrypted data and an intelligent frame selection algorithm to improve video imperceptibility.In the previous approach,DNA was used only for frame selection.If this DNA is compromised,then our frames with the hidden and unencrypted data will be exposed.Moreover the frame selected in this way were random frames,and no consideration was made to the contents of frames.Hiding data in this way introduces visible artifacts in video.In the proposed approach rather than using DNA for frame selection we have created a fakeDNA out of our data and then embedded it in a video file on intelligently selected frames called the complex frames.Using chaotic maps and linear congruential generators,a unique pixel set is selected each time only from the identified complex frames,and encrypted data is embedded in these random locations.Experimental results demonstrate that the proposed technique shows minimum degradation of the stenographic video hence reducing the very first chances of visual surveillance.Further,the selection of complex frames for embedding and creation of a fake DNA as proposed in this research have higher peak signal-to-noise ratio(PSNR)and reduced mean squared error(MSE)values that indicate improved results.The proposed methodology has been implemented in Matlab.展开更多
Plug-and-play priors are popular for solving illposed imaging inverse problems. Recent efforts indicate that the convergence guarantee of the imaging algorithms using plug-andplay priors relies on the assumption of bo...Plug-and-play priors are popular for solving illposed imaging inverse problems. Recent efforts indicate that the convergence guarantee of the imaging algorithms using plug-andplay priors relies on the assumption of bounded denoisers. However, the bounded properties of existing plugged Gaussian denoisers have not been proven explicitly. To bridge this gap, we detail a novel provable bounded denoiser termed as BMDual,which combines a trainable denoiser using dual tight frames and the well-known block-matching and 3D filtering(BM3D)denoiser. We incorporate multiple dual frames utilized by BMDual into a novel regularization model induced by a solver. The proposed regularization model is utilized for compressed sensing magnetic resonance imaging(CSMRI). We theoretically show the bound of the BMDual denoiser, the bounded gradient of the CSMRI data-fidelity function, and further demonstrate that the proposed CSMRI algorithm converges. Experimental results also demonstrate that the proposed algorithm has a good convergence behavior, and show the effectiveness of the proposed algorithm.展开更多
In this paper,using Parseval frames we generalize Sun’s results to g-frames in Hilbert C^(*)-modules.Moreover,for g-frames in Hilbert spaces,we present some characterizations in terms of a family of frames,not only f...In this paper,using Parseval frames we generalize Sun’s results to g-frames in Hilbert C^(*)-modules.Moreover,for g-frames in Hilbert spaces,we present some characterizations in terms of a family of frames,not only for orthonormal bases.Also,we have a note about a comment and a relation in the proof of Proposition 5.3 in[D.Li et al.,On weaving g-frames for Hilbert spaces,Complex Analysis and Operator Theory,2020].Finally,we have some results for g-Riesz bases,woven and P-woven g-frames.展开更多
This paper presents experimental and numerical investigations on progressive collapse behavior of a two-story glulam frame when the side column is exposed to ISO834 standard fire.The collapse mechanism initiated by fi...This paper presents experimental and numerical investigations on progressive collapse behavior of a two-story glulam frame when the side column is exposed to ISO834 standard fire.The collapse mechanism initiated by fire is identified.The experimental results show that the progressive collapse of a glulam frame could be described for three stages,namely bending effect stage,catenary effect stage and failure stage,respectively.These stages are discussed in detail to understand the structural behavior before and during collapse.It is demonstrated that the entire frame slopes towards the side of the heated column,and the“overturning”collapse occurs eventually.The catenary effect of beams is the main reason for the progressive collapse of the frame.In addition,a finite element model of a glulam frame is established to simulate the progressive collapse behavior.The effects of axial loads on the columns are summarized.The numerical simulation results agree well with the experimental results,which could verify the effectiveness and practicability of finite element simulation.Furthermore,the progressive collapse resistance of the frame in practical design were proposed.展开更多
Video prediction is the problem of generating future frames by exploiting the spatiotemporal correlation from the past frame sequence.It is one of the crucial issues in computer vision and has many real-world applicat...Video prediction is the problem of generating future frames by exploiting the spatiotemporal correlation from the past frame sequence.It is one of the crucial issues in computer vision and has many real-world applications,mainly focused on predicting future scenarios to avoid undesirable outcomes.However,modeling future image content and object is challenging due to the dynamic evolution and complexity of the scene,such as occlusions,camera movements,delay and illumination.Direct frame synthesis or optical-flow estimation are common approaches used by researchers.However,researchers mainly focused on video prediction using one of the approaches.Both methods have limitations,such as direct frame synthesis,usually face blurry prediction due to complex pixel distributions in the scene,and optical-flow estimation,usually produce artifacts due to large object displacements or obstructions in the clip.In this paper,we constructed a deep neural network Frame Prediction Network(FPNet-OF)with multiplebranch inputs(optical flow and original frame)to predict the future video frame by adaptively fusing the future object-motion with the future frame generator.The key idea is to jointly optimize direct RGB frame synthesis and dense optical flow estimation to generate a superior video prediction network.Using various real-world datasets,we experimentally verify that our proposed framework can produce high-level video frame compared to other state-ofthe-art framework.展开更多
The back frame structure of a large radio telescope is an important component supporting the reflecting surface,which is directly related to the surface precision.Its optimal design is of key significance for ensuring...The back frame structure of a large radio telescope is an important component supporting the reflecting surface,which is directly related to the surface precision.Its optimal design is of key significance for ensuring the surface precision and reducing structural weight.Two methods are constructed to optimize the cross-section size of the telescope back frame in this paper,the criterion method and the first-order optimization method.The criterion method is based on the Lagrangian multiplier method and Kuhn-Tucker condition.This method first establishes the mathematical model by taking the inner and outer radiuses of the back frame beams as the design variables,the structural weight as the constraint condition,and the structural compliance as the objective function,then derives the optimization criterion.The first-order optimization method takes the inner and outer radiuses of the beams as the design variables,the back frame RMS as the objective function,and the structural weight as the constraint condition.Comparison of RMS,structural stress uniformity and optimization efficiency shows that both algorithms can effectively reduce structural deformation and improve RMS,but the criterion method has relatively better result than the first-order method.展开更多
The covariant derivative is a generalization of differentiating vectors.The Euclidean derivative is a special case of the covariant derivative in Euclidean space.The covariant derivative gathers broad attention,partic...The covariant derivative is a generalization of differentiating vectors.The Euclidean derivative is a special case of the covariant derivative in Euclidean space.The covariant derivative gathers broad attention,particularly when computing vector derivatives on curved surfaces and volumes in various applications.Covariant derivatives have been computed using the metric tensor from the analytically known curved axes.However,deriving the global axis for the domain has been mathematically and computationally challenging for an arbitrary two-dimensional(2D)surface.Consequently,computing the covariant derivative has been difficult or even impossible.A novel high-order numerical scheme is proposed for computing the covariant derivative on any 2D curved surface.A set of orthonormal vectors,known as moving frames,expand vectors to compute accurately covariant derivatives on 2D curved surfaces.The proposed scheme does not require the construction of curved axes for the metric tensor or the Christoffel symbols.The connectivity given by the Christoffel symbols is equivalently provided by the attitude matrix of orthonormal moving frames.Consequently,the proposed scheme can be extended to the general 2D curved surface.As an application,the Helmholtz‐Hodge decomposition is considered for a realistic atrium and a bunny.展开更多
Viscoelastic damper is an effective passive damping device,which can reduce the seismic response of the structure by increasing the damping and dissipating the vibration energy of structures.It has a wide application ...Viscoelastic damper is an effective passive damping device,which can reduce the seismic response of the structure by increasing the damping and dissipating the vibration energy of structures.It has a wide application prospect in actual structural vibration control because of simple device and economical material.In view of the poor seismic behaviors of assembled frame structure connections,various energy dissipation devices are proposed to improve the seismic performance.The finite element numerical analysis method is adopted to analyze relevant energy dissipation structural parameters.The response spectrum of a 7-story assembled frame structure combined the ordinary steel support,ordinary viscoelastic damper,and viscoelastic damper with displacement amplification device is analyzed.The analysis results show that the mechanical behavior of assembled frame structure with ordinary steel supports are not significantly different from those without energy dissipation devices.The assembled frame structure with viscoelastic damper has better seismic performance and energy dissipation,especially for the viscoelastic damper with displacement amplification devices.The maximum value of inter-story displacement angle decreases by 32.24%;the maximum floor displacement decreases by 31.91%,and the base shear decreases by 13.62%compared with the assembled frame structures without energy dissipation devices.The results show that the seismic fortification ability of the structure is significantly improved,and the overall structure is more uniformly stressed.The damping structure with viscoelastic damper mainly reduces the dynamic response of the structure by increasing the damping coefficient,rather than by changing the natural vibration period of the structure.This paper provides an effective theoretical basis and reference for improving the energy dissipation system and the seismic performance of assembled frame structures.展开更多
Based on Fillmore’s frame theory, this paper examines the translator’s cognitive frame operation in the English subtitle translation of Quanzhou’s World Heritage application documentary. It analyzes and discusses h...Based on Fillmore’s frame theory, this paper examines the translator’s cognitive frame operation in the English subtitle translation of Quanzhou’s World Heritage application documentary. It analyzes and discusses how the translator maximizes translation effect between the source language and the target language, so as to enhance the readability of documentary subtitles and promote the spread of traditional Chinese culture. The findings are as follows: Firstly, in the translation process, the frame operations used by the translator include frame correspondence, intra-frame operations, frame replacement, frame perspective shift and frame transplantation. Secondly, cultural documentaries are full of culture-loaded words, for which the translator usually uses frame transplantation. Thirdly, due to the instantaneous nature of subtitles, intra-frame operations and frame replacement are applied in terms of cultural background of the target language audience. Besides, in order to enhance the audience’s reading experience, there may be some changes of narrative perspective in the English translation of cultural documentaries.展开更多
The rotation-minimizing frame is the main research object for a spatial curve. Although the mathematical description is not complicated, it is not easy to directly make an exact minimizing-rotation frame for the Euler...The rotation-minimizing frame is the main research object for a spatial curve. Although the mathematical description is not complicated, it is not easy to directly make an exact minimizing-rotation frame for the Euler-Rodrigues frame. The condition for the non-normalized Euler-Rodrigues frame of the Pythagorean-Hodograph curve to become the rotation-minimizing frame is given in this article, which is an ordinary differential equation with rational form, the analytical solution that does not always exist. To avoid calculating the solution of ordinary differential equations, a global optimization algorithm for the conditions is proposed, that has a weight function in the objective function. The quintic Pythagorean-Hodograph curve is analyzed concretely with the method, and its objective function and constraint conditions of optimization are clarified. The example is analyzed by using this method with different weight functions and contrasting that approach with its exact value.展开更多
Truck frames should be designed and fabricated with enough rigidity to avoid excessive deflections. Finite element analysis (FEA) plays an important role in all stages of frame designs. While being accurate, 3D solid ...Truck frames should be designed and fabricated with enough rigidity to avoid excessive deflections. Finite element analysis (FEA) plays an important role in all stages of frame designs. While being accurate, 3D solid element FEA models are built upon frame configuration details which are not feasible in the preliminary design stage, partially because of limited available design data of frames and heavy computation costs. This research develops 1D beam element FEA models for simulating frame structures. In this paper, the CAD model of a truck frame is first created. The solid element FEA analysis, which is adopted as the baseline in this study, is subsequently conducted for the stiffness of the frame, Next, beam element FEA analysis is performed for validating the feasibility of the beam element FEA model by comparing the results from the solid and beam element FEA models. It is found that the beam element FEA model can predict the frame stiffness with acceptable accuracy and reduce the computation cost significantly.展开更多
基金National Key Research and Development Program of China under Grant No.2022YFC3803004Postgraduate Research&Practice Innovation Program of Jiangsu Province under Grant No.SJCX20_0031Fundamental Research Funds for the Central Universities under Grant No.3205002108D。
文摘A resilience-incorporated risk assessment framework is proposed and demonstrated in this study to manifest the advantageous seismic resilience of precast concrete frame(PCF)structures with“dry”connections in terms of their low damage and rapid recovery.The framework integrates various uncertainties in the seismic hazard,fragility,capacity,demand,loss functions,and post-earthquake recovery.In this study,the PCF structures are distinguished from ordinary reinforced concrete frame(RCF)structures by characterizing multiple limit states for the PCF based on its unique damage mechanisms.Accordingly,probabilistic story-wise pushover analyses are performed to yield story-wise capacities for the predefined limit states.In the seismic resilience analysis,a step-wise recovery model is proposed to idealize the functionality recovery process,with separate considerations of the repair and non-repair events.The recovery model leverages the economic loss and downtime to delineate the stochastic post-earthquake recovery curves for the resilience loss estimation.As such,contingencies in the probabilistic post-earthquake repairs are incorporated and the empirical judgments on the recovery parameters are largely circumvented.The proposed framework is demonstrated through a comparative study between two“dry”connected PCFs and one RCF designed as alternative structural systems for a prototype building.The results from the risk quantification indicate that the PCFs show reduced loss hazards and lower expected losses relative to the RCF.Particularly,the PCF equipped with energy dissipation devices at the“dry”connections largely reduces the expected economic loss,downtime,and resilience loss by 29%,56%,and 60%,respectively,compared to the RCF.
文摘H-steel all-bolted connection steel frame structures with heat preservation and decoration composite wall boards were investigated and the seismic performances of three scaled specimens were studied.The failure modes,hysteresis curves,bearing capacity,ductility,energy dissipation capacity,stiffness degradation and strain distribution were discussed.The calculation method of structural theoretical internal force was presented.The results showed that the overall structural seismic performance was better,and the structural ductility met the demands of elastic-plastic inter-story drift angle for seismic design.The H-steel weak-axis connection structure obtained better energy dissipation capacity,and its bearing capacity and stiffness were slightly different from the strong-axis connection.The heat preservation and decoration performance of composite wallboard and the all-bolted connection of the steel frame realized prefabrication during the whole construction period.The plastic hinge of the steel beam can be moved outwards because of the L-angles,which effectively avoids stress concentration in joint areas and expands the plastic hinge range.The errors between the theoretical structural capacity calculated by the plastic analysis method and the test results were within 2.44%.In addition,structural failure mechanisms and bearing capacities were verified by the finite element(FE)analysis,and the effects of the main parameters on the structures were investigated.The FE verification results were the same as in the test.The research results provide theoretical support and technical guidance for the application of thermal insulation and decorative composite wall panels in H-shaped steel all-bolted steel frames.
基金supported in part by the Sichuan Science and Technology Program(Grant No.2023YFG0316)the Industry-University Research Innovation Fund of China University(Grant No.2021ITA10016)+1 种基金the Key Scientific Research Fund of Xihua University(Grant No.Z1320929)the Special Funds of Industry Development of Sichuan Province(Grant No.zyf-2018-056).
文摘Due to the interdependency of frame synchronization(FS)and channel estimation(CE),joint FS and CE(JFSCE)schemes are proposed to enhance their functionalities and therefore boost the overall performance of wireless communication systems.Although traditional JFSCE schemes alleviate the influence between FS and CE,they show deficiencies in dealing with hardware imperfection(HI)and deterministic line-of-sight(LOS)path.To tackle this challenge,we proposed a cascaded ELM-based JFSCE to alleviate the influence of HI in the scenario of the Rician fading channel.Specifically,the conventional JFSCE method is first employed to extract the initial features,and thus forms the non-Neural Network(NN)solutions for FS and CE,respectively.Then,the ELMbased networks,named FS-NET and CE-NET,are cascaded to capture the NN solutions of FS and CE.Simulation and analysis results show that,compared with the conventional JFSCE methods,the proposed cascaded ELM-based JFSCE significantly reduces the error probability of FS and the normalized mean square error(NMSE)of CE,even against the impacts of parameter variations.
基金supports from National Natural Science Foundation of China (Grant No.62205117,52275429)National Key Research and Development Program of China (Grant No.2021YFF0502700)+3 种基金Young Elite Scientists Sponsorship Program by CAST (Grant No.2022QNRC001)West Light Foundation of the Chinese Academy of Sciences (Grant No.xbzg-zdsys-202206)Knowledge Innovation Program of Wuhan-Shuguang,Innovation project of Optics Valley Laboratory (Grant No.OVL2021ZD002)Hubei Provincial Natural Science Foundation of China (Grant No.2022CFB792).
文摘Interactive holography offers unmatched levels of immersion and user engagement in the field of future display.Despite of the substantial progress has been made in dynamic meta-holography,the realization of real-time,highly smooth interactive holography remains a significant challenge due to the computational and display frame rate limitations.In this study,we introduced a dynamic interactive bitwise meta-holography with ultra-high computational and display frame rates.To our knowledge,this is the first reported practical dynamic interactive metasurface holographic system.We spa-tially divided the metasurface device into multiple distinct channels,each projecting a reconstructed sub-pattern.The switching states of these channels were mapped to bitwise operations on a set of bit values,which avoids complex holo-gram computations,enabling an ultra-high computational frame rate.Our approach achieves a computational frame rate of 800 kHz and a display frame rate of 23 kHz on a low-power Raspberry Pi computational platform.According to this methodology,we demonstrated an interactive dynamic holographic Tetris game system that allows interactive gameplay,color display,and on-the-fly hologram creation.Our technology presents an inspiration for advanced dynamic meta-holography,which is promising for a broad range of applications including advanced human-computer interaction,real-time 3D visualization,and next-generation virtual and augmented reality systems.
文摘This paper presents an investigation of the seismic behavior of reinforced concrete(RC)structures in which shear walls are the main lateral load-resisting elements and the participation of flat slab floor systems is not considered in the seismic design procedure.In this regard,the behavior of six prototype structures(with different heights and plan layouts)is investigated through nonlinear static and time history analyses,implemented in the OpenSees platform.The results of the analyses are presented in terms of the behavior of the slab-column connections and their mode of failure at different loading stages.Moreover,the global response of the buildings is discussed in terms of some parameters,such as lateral overstrength due to the gravity flat slab-column frames.According to the nonlinear static analyses,in structures in which the slab-column connections were designed only for gravity loads,the slab-column connections exhibited a punching mode of failure even in the early stages of loading.However,the punching failure was eliminated in structures in which a minimum transverse reinforcement recommended in ACI 318(2019)was provided in the slabs at joint regions.Furthermore,despite neglecting the contribution of gravity flat slab-column frames in the lateral load resistance of the structures,a relatively significant overstrength was imposed on the structures by the gravity frames.
文摘The deteriorated continuous rigid frame bridge is strengthened by external prestressing. Static loading tests wereconducted before and after the bridge rehabilitation to verify the effectiveness of the rehabilitation process. Thestiffness of the repaired bridge is improved, and the maximum deflection of the load test is reduced from 37.9 to27.6 mm. A bridge health monitoring system is installed after the bridge is reinforced. To achieve an easy assessmentof the bridge’s safety status by directly using transferred data, a real-time safety warning system is createdbased on a five-level safety standard. The threshold for each safety level will be determined by theoretical calculationsand the outcomes of static loading tests. The highest risk threshold will be set at the ultimate limit statevalue. The remaining levels, namely middle risk, low risk, and very low risk, will be determined usingreduction coefficients of 0.95, 0.9, and 0.8, respectively.
文摘The fundamental frequency plays a significant part in understanding and perceiving the pitch of a sound. The pitch is a fundamental attribute employed in numerous speech-related works. For fundamental frequency extraction, several algorithms have been developed which one to use relies on the signal’s characteristics and the surrounding noise. Thus, the algorithm’s noise resistance becomes more critical than ever for precise fundamental frequency estimation. Nonetheless, numerous state-of-the-art algorithms face struggles in achieving satisfying outcomes when confronted with speech recordings that are noisy with low signal-to-noise ratio (SNR) values. Also, most of the recent techniques utilize different frame lengths for pitch extraction. From this point of view, This research considers different frame lengths on male and female speech signals for fundamental frequency extraction. Also, analyze the frame length dependency on the speech signal analytically to understand which frame length is more suitable and effective for male and female speech signals specifically. For the validation of our idea, we have utilized the conventional autocorrelation function (ACF), and state-of-the-art method BaNa. This study puts out a potent idea that will work better for speech processing applications in noisy speech. From experimental results, the proposed idea represents which frame length is more appropriate for male and female speech signals in noisy environments.
文摘A two-stage automatic key frame selection method is proposed to enhance stitching speed and quality for UAV aerial videos. In the first stage, to reduce redundancy, the overlapping rate of the UAV aerial video sequence within the sampling period is calculated. Lagrange interpolation is used to fit the overlapping rate curve of the sequence. An empirical threshold for the overlapping rate is then applied to filter candidate key frames from the sequence. In the second stage, the principle of minimizing remapping spots is used to dynamically adjust and determine the final key frame close to the candidate key frames. Comparative experiments show that the proposed method significantly improves stitching speed and accuracy by more than 40%.
基金Taif University Researchers Supporting Project number(TURSP-2020/98),Taif University,Taif,Saudi Arabia.
文摘The most valuable resource on the planet is no longer oil,but data.The transmission of this data securely over the internet is another challenge that comes with its ever-increasing value.In order to transmit sensitive information securely,researchers are combining robust cryptography and steganographic approaches.The objective of this research is to introduce a more secure method of video steganography by using Deoxyribonucleic acid(DNA)for embedding encrypted data and an intelligent frame selection algorithm to improve video imperceptibility.In the previous approach,DNA was used only for frame selection.If this DNA is compromised,then our frames with the hidden and unencrypted data will be exposed.Moreover the frame selected in this way were random frames,and no consideration was made to the contents of frames.Hiding data in this way introduces visible artifacts in video.In the proposed approach rather than using DNA for frame selection we have created a fakeDNA out of our data and then embedded it in a video file on intelligently selected frames called the complex frames.Using chaotic maps and linear congruential generators,a unique pixel set is selected each time only from the identified complex frames,and encrypted data is embedded in these random locations.Experimental results demonstrate that the proposed technique shows minimum degradation of the stenographic video hence reducing the very first chances of visual surveillance.Further,the selection of complex frames for embedding and creation of a fake DNA as proposed in this research have higher peak signal-to-noise ratio(PSNR)and reduced mean squared error(MSE)values that indicate improved results.The proposed methodology has been implemented in Matlab.
基金supported in part by the National Natural Science Foundation of China (62371414,61901406)the Hebei Natural Science Foundation (F2020203025)+2 种基金the Young Talent Program of Universities and Colleges in Hebei Province (BJ2021044)the Hebei Key Laboratory Project (202250701010046)the Central Government Guides Local Science and Technology Development Fund Projects(216Z1602G)。
文摘Plug-and-play priors are popular for solving illposed imaging inverse problems. Recent efforts indicate that the convergence guarantee of the imaging algorithms using plug-andplay priors relies on the assumption of bounded denoisers. However, the bounded properties of existing plugged Gaussian denoisers have not been proven explicitly. To bridge this gap, we detail a novel provable bounded denoiser termed as BMDual,which combines a trainable denoiser using dual tight frames and the well-known block-matching and 3D filtering(BM3D)denoiser. We incorporate multiple dual frames utilized by BMDual into a novel regularization model induced by a solver. The proposed regularization model is utilized for compressed sensing magnetic resonance imaging(CSMRI). We theoretically show the bound of the BMDual denoiser, the bounded gradient of the CSMRI data-fidelity function, and further demonstrate that the proposed CSMRI algorithm converges. Experimental results also demonstrate that the proposed algorithm has a good convergence behavior, and show the effectiveness of the proposed algorithm.
文摘In this paper,using Parseval frames we generalize Sun’s results to g-frames in Hilbert C^(*)-modules.Moreover,for g-frames in Hilbert spaces,we present some characterizations in terms of a family of frames,not only for orthonormal bases.Also,we have a note about a comment and a relation in the proof of Proposition 5.3 in[D.Li et al.,On weaving g-frames for Hilbert spaces,Complex Analysis and Operator Theory,2020].Finally,we have some results for g-Riesz bases,woven and P-woven g-frames.
基金funded by the Jiangsu Province Science Fund for Distinguished Young Scholars(Grant No.BK20211536)Research Foundation of Nanjing Gongda Construction Technology Co.,Ltd.(Grant No.2021RD01).
文摘This paper presents experimental and numerical investigations on progressive collapse behavior of a two-story glulam frame when the side column is exposed to ISO834 standard fire.The collapse mechanism initiated by fire is identified.The experimental results show that the progressive collapse of a glulam frame could be described for three stages,namely bending effect stage,catenary effect stage and failure stage,respectively.These stages are discussed in detail to understand the structural behavior before and during collapse.It is demonstrated that the entire frame slopes towards the side of the heated column,and the“overturning”collapse occurs eventually.The catenary effect of beams is the main reason for the progressive collapse of the frame.In addition,a finite element model of a glulam frame is established to simulate the progressive collapse behavior.The effects of axial loads on the columns are summarized.The numerical simulation results agree well with the experimental results,which could verify the effectiveness and practicability of finite element simulation.Furthermore,the progressive collapse resistance of the frame in practical design were proposed.
基金supported by Incheon NationalUniversity Research Grant in 2017.
文摘Video prediction is the problem of generating future frames by exploiting the spatiotemporal correlation from the past frame sequence.It is one of the crucial issues in computer vision and has many real-world applications,mainly focused on predicting future scenarios to avoid undesirable outcomes.However,modeling future image content and object is challenging due to the dynamic evolution and complexity of the scene,such as occlusions,camera movements,delay and illumination.Direct frame synthesis or optical-flow estimation are common approaches used by researchers.However,researchers mainly focused on video prediction using one of the approaches.Both methods have limitations,such as direct frame synthesis,usually face blurry prediction due to complex pixel distributions in the scene,and optical-flow estimation,usually produce artifacts due to large object displacements or obstructions in the clip.In this paper,we constructed a deep neural network Frame Prediction Network(FPNet-OF)with multiplebranch inputs(optical flow and original frame)to predict the future video frame by adaptively fusing the future object-motion with the future frame generator.The key idea is to jointly optimize direct RGB frame synthesis and dense optical flow estimation to generate a superior video prediction network.Using various real-world datasets,we experimentally verify that our proposed framework can produce high-level video frame compared to other state-ofthe-art framework.
文摘The back frame structure of a large radio telescope is an important component supporting the reflecting surface,which is directly related to the surface precision.Its optimal design is of key significance for ensuring the surface precision and reducing structural weight.Two methods are constructed to optimize the cross-section size of the telescope back frame in this paper,the criterion method and the first-order optimization method.The criterion method is based on the Lagrangian multiplier method and Kuhn-Tucker condition.This method first establishes the mathematical model by taking the inner and outer radiuses of the back frame beams as the design variables,the structural weight as the constraint condition,and the structural compliance as the objective function,then derives the optimization criterion.The first-order optimization method takes the inner and outer radiuses of the beams as the design variables,the back frame RMS as the objective function,and the structural weight as the constraint condition.Comparison of RMS,structural stress uniformity and optimization efficiency shows that both algorithms can effectively reduce structural deformation and improve RMS,but the criterion method has relatively better result than the first-order method.
基金the National Research Foundation of Korea(NRF-2021R1A2C109297811).
文摘The covariant derivative is a generalization of differentiating vectors.The Euclidean derivative is a special case of the covariant derivative in Euclidean space.The covariant derivative gathers broad attention,particularly when computing vector derivatives on curved surfaces and volumes in various applications.Covariant derivatives have been computed using the metric tensor from the analytically known curved axes.However,deriving the global axis for the domain has been mathematically and computationally challenging for an arbitrary two-dimensional(2D)surface.Consequently,computing the covariant derivative has been difficult or even impossible.A novel high-order numerical scheme is proposed for computing the covariant derivative on any 2D curved surface.A set of orthonormal vectors,known as moving frames,expand vectors to compute accurately covariant derivatives on 2D curved surfaces.The proposed scheme does not require the construction of curved axes for the metric tensor or the Christoffel symbols.The connectivity given by the Christoffel symbols is equivalently provided by the attitude matrix of orthonormal moving frames.Consequently,the proposed scheme can be extended to the general 2D curved surface.As an application,the Helmholtz‐Hodge decomposition is considered for a realistic atrium and a bunny.
基金supported by Foundation of Henan Educational Committee(20A560004,J.Z.)Foundation of Henan Science and Technology Project(182102311086,Y.W.)Foundation for University Key Teacher(YCJQNGGJS201901,J.Z.,YCJXSJSDTR201801,Y.W.,Henan University of Urban Construction).
文摘Viscoelastic damper is an effective passive damping device,which can reduce the seismic response of the structure by increasing the damping and dissipating the vibration energy of structures.It has a wide application prospect in actual structural vibration control because of simple device and economical material.In view of the poor seismic behaviors of assembled frame structure connections,various energy dissipation devices are proposed to improve the seismic performance.The finite element numerical analysis method is adopted to analyze relevant energy dissipation structural parameters.The response spectrum of a 7-story assembled frame structure combined the ordinary steel support,ordinary viscoelastic damper,and viscoelastic damper with displacement amplification device is analyzed.The analysis results show that the mechanical behavior of assembled frame structure with ordinary steel supports are not significantly different from those without energy dissipation devices.The assembled frame structure with viscoelastic damper has better seismic performance and energy dissipation,especially for the viscoelastic damper with displacement amplification devices.The maximum value of inter-story displacement angle decreases by 32.24%;the maximum floor displacement decreases by 31.91%,and the base shear decreases by 13.62%compared with the assembled frame structures without energy dissipation devices.The results show that the seismic fortification ability of the structure is significantly improved,and the overall structure is more uniformly stressed.The damping structure with viscoelastic damper mainly reduces the dynamic response of the structure by increasing the damping coefficient,rather than by changing the natural vibration period of the structure.This paper provides an effective theoretical basis and reference for improving the energy dissipation system and the seismic performance of assembled frame structures.
文摘Based on Fillmore’s frame theory, this paper examines the translator’s cognitive frame operation in the English subtitle translation of Quanzhou’s World Heritage application documentary. It analyzes and discusses how the translator maximizes translation effect between the source language and the target language, so as to enhance the readability of documentary subtitles and promote the spread of traditional Chinese culture. The findings are as follows: Firstly, in the translation process, the frame operations used by the translator include frame correspondence, intra-frame operations, frame replacement, frame perspective shift and frame transplantation. Secondly, cultural documentaries are full of culture-loaded words, for which the translator usually uses frame transplantation. Thirdly, due to the instantaneous nature of subtitles, intra-frame operations and frame replacement are applied in terms of cultural background of the target language audience. Besides, in order to enhance the audience’s reading experience, there may be some changes of narrative perspective in the English translation of cultural documentaries.
文摘The rotation-minimizing frame is the main research object for a spatial curve. Although the mathematical description is not complicated, it is not easy to directly make an exact minimizing-rotation frame for the Euler-Rodrigues frame. The condition for the non-normalized Euler-Rodrigues frame of the Pythagorean-Hodograph curve to become the rotation-minimizing frame is given in this article, which is an ordinary differential equation with rational form, the analytical solution that does not always exist. To avoid calculating the solution of ordinary differential equations, a global optimization algorithm for the conditions is proposed, that has a weight function in the objective function. The quintic Pythagorean-Hodograph curve is analyzed concretely with the method, and its objective function and constraint conditions of optimization are clarified. The example is analyzed by using this method with different weight functions and contrasting that approach with its exact value.
文摘Truck frames should be designed and fabricated with enough rigidity to avoid excessive deflections. Finite element analysis (FEA) plays an important role in all stages of frame designs. While being accurate, 3D solid element FEA models are built upon frame configuration details which are not feasible in the preliminary design stage, partially because of limited available design data of frames and heavy computation costs. This research develops 1D beam element FEA models for simulating frame structures. In this paper, the CAD model of a truck frame is first created. The solid element FEA analysis, which is adopted as the baseline in this study, is subsequently conducted for the stiffness of the frame, Next, beam element FEA analysis is performed for validating the feasibility of the beam element FEA model by comparing the results from the solid and beam element FEA models. It is found that the beam element FEA model can predict the frame stiffness with acceptable accuracy and reduce the computation cost significantly.