Collapse Behavior of Pipe-Framed Greenhouses with and without Reinforcement under Snow Loading:A 3-D Finite Element Analysis

The present paper first investigates the collapse behavior of a conventional pipe-framed greenhouse under snow loading based on a 3-D finite element analysis,in which both geometrical and material non-linearities are considered.Three snow load distribution patterns related to the wind-driven snow particle movement are used in the analysis.It is found that snow load distribution affects the deformation and collapse behavior of the pipe-framed greenhouse significantly.The results obtained in this study are consistent with the actual damage observed.Next,discussion is made of the effects of reinforcements by adding members to the basic frame on the strength of the whole structure,in which seven kinds of reinforcement methods are examined.A buckling analysis is also carried out.The results indicate that the most effective reinforcement method depends on the snow load distribution pattern.

A Computational Framework for Parachute Inflation Based on Immersed Boundary/Finite Element Approach

A computational framework for parachute inflation is developed based on the immersed boundary/finite element approach within the open-source IBAMR library.The fluid motion is solved by Peskin's diffuse-interface immersed boundary(IB)method,which is attractive for simulating moving-boundary flows with large deformations.The adaptive mesh refinement technique is employed to reduce the computational cost while retain the desired resolution.The dynamic response of the parachute is solved with the finite element approach.The canopy and cables of the parachute system are modeled with the hyperelastic material.A tether force is introduced to impose rigidity constraints for the parachute system.The accuracy and reliability of the present framework is validated by simulating inflation of a constrained square plate.Application of the present framework on several canonical cases further demonstrates its versatility for simulation of parachute inflation.

FINITE EXTENSIONS OF GENERALIZED BESSEL SEQUENCES TO GENERALIZED FRAMES

The objective of this paper is to investigate the question of modifying a givengeneralized Bessel sequence to yield a generalized frame or a tight generalized frame by finiteextension. Some necessary and sufficient conditions for the finite extensions of generalizedBessel sequences to generalized frames or tight generalized frames are provided, and everyresult is illustrated by the corresponding example.

Frame-invariance in finite element formulations of geometrically exact rods

This article is concerned with finite element implementations of the three- dimensional geometrically exact rod. The special attention is paid to identifying the con- dition that ensures the frame invariance of the resulting discrete approximations. From the perspective of symmetry, this requirement is equivalent to the commutativity of the employed interpolation operator I with the action of the special Euclidean group SE（3）, or I is SE（3）-equivariant. This geometric criterion helps to clarify several subtle issues about the interpolation of finite rotation. It leads us to reexamine the finite element for- mulation first proposed by Simo in his work on energy-momentum conserving algorithms. That formulation is often mistakenly regarded as non-objective. However, we show that the obtained approximation is invariant under the superposed rigid body motions, and as a corollary, the objectivity of the continuum model is preserved. The key of this proof comes from the observation that since the numerical quadrature is used to compute the integrals, by storing the rotation field and its derivative at the Gauss points, the equiv- ariant conditions can be relaxed only at these points. Several numerical examples are presented to confirm the theoretical results and demonstrate the performance of this al- gorithm.

Pseudo-dynamic test and numerical simulation of high-strength concrete frame structure reinforced with high-strength rebars

This paper describes an investigation of a high-strength concrete frame reinforced with high-strength rebars that was tested in the structure engineering laboratory at Shenyang Jianzhu University. The frame specimen was pseudo- dynamically loaded to indicate three earthquake ground motions of different hazard levels, after which the test specimen was subjected to a pseudo-static loading. This paper focuses on the design, construction and experiment of the test frame and validation of the simulation models. Research shows that a high-strength concrete frame reinforced with high-strength rebars is more efficient and economical than a traditional reinforced concrete frame structure. In addition to the economies achieved by effective use of materials, research shows that the frame can provide enough strength to exceed conventional reinforced concrete frames and provide acceptable ductility. The test study provides evidence to validate the performance of a high- strength concrete frame designed according to current seismic code provisions. Based on previous test research, a nonlinear FEM analysis is completcd by using OpenSees software, The dynamic responses of the frame structure are numerically analyzed, The results of the numerical simulation show that the model can calculate the seismic responses of the frame by OpenSees. At the same time, the test provides additional opportunities to validate the performance of the simulation models.

Dynamic interactive bitwise meta-holography with ultra-high computational and display frame rates

Interactive holography offers unmatched levels of immersion and user engagement in the field of future display.Despite of the substantial progress has been made in dynamic meta-holography,the realization of real-time,highly smooth interactive holography remains a significant challenge due to the computational and display frame rate limitations.In this study,we introduced a dynamic interactive bitwise meta-holography with ultra-high computational and display frame rates.To our knowledge,this is the first reported practical dynamic interactive metasurface holographic system.We spa-tially divided the metasurface device into multiple distinct channels,each projecting a reconstructed sub-pattern.The switching states of these channels were mapped to bitwise operations on a set of bit values,which avoids complex holo-gram computations,enabling an ultra-high computational frame rate.Our approach achieves a computational frame rate of 800 kHz and a display frame rate of 23 kHz on a low-power Raspberry Pi computational platform.According to this methodology,we demonstrated an interactive dynamic holographic Tetris game system that allows interactive gameplay,color display,and on-the-fly hologram creation.Our technology presents an inspiration for advanced dynamic meta-holography,which is promising for a broad range of applications including advanced human-computer interaction,real-time 3D visualization,and next-generation virtual and augmented reality systems.

SOME RESULTS ON CONTROLLED FRAMES IN HILBERT SPACES

We use two appropriate bounded invertible operators to define a controlled frame with optimal frame bounds. We characterize those operators that produces Parseval controlled frames also we state a way to construct nearly Parseval controlled frames. We intro- duce a new perturbation of controlled frames to obtain new frames from a given one. Also we reduce the distance of frames by appropriate operators and produce nearly dual frames from two given frames which are not dual frames for each other.

FRAME MULTIRESOLUTION ANALYSIS AND INFINITE TREES IN BANACH SPACES ON LOCALLY COMPACT ABELIAN GROUPS

We extend the concept of frame multiresolution analysis to a locally compact abelian group and use it to define certain weighted Banach spaces and the spaces of their antifunctionals. We define analysis and synthesis operators on these spaces and establish the continuity of their composition. Also, we prove a general result to characterize infinite trees in the above Banach spaces of antifunctionals. This paper paves the way for the study of corresponding problems associated with some other types of Banach spaces on locally compact abelian groups including modulation spaces.

A Robust Digital Watermarking Algorithm Based on Finite-Set Discrete Radon Transform Tight Frame

Digital watermarking technology plays a powerful role in the effective protection of digital media copyright, image authentication, image sharing, image information transmission and other fields. Driven by strong demand, digital image watermarking technology has aroused widespread research interest and has gradually developed into one of the most active research directions in information science. In this paper, we present a novel robust digital watermarking algorithm based on discrete radon transform tight frame in finite-set (FDRT). FDRT of the zero mean image is a tight frame, the frame boundary A = B = 1, the dual of the frame is itself. The decomposition and reconstruction of the FDRT tight frame will not cause the phenomenon of image distortion. The embedding of hidden watermark is to add a weak signal to the strong background of the original image. Watermark extraction is to effectively identify the embedded weak signal. The feasibility of the watermarking algorithm is analyzed from two aspects of information hiding and robustness. We select the independent Gaussian random vector as the watermark series, and the peak signal-to-noise ratio (PSNR) as the visual degradation criterion of the watermark image. Basing the FDRT compact stand dual operator, we derived the relationship among the strength parameter, square sum of watermark series, the PSNR. Using Checkmark system, the simulation results show that the algorithm is robust enough to some very important image processing attacks such as lossy compression, MAP, filtering, segmentation, edge enhancement, jitter, quadratic modulation and general geometric attack (scaling, rotation, shearing), etc.

Analytical Model of Nonlinear Semi-rigid Frames Using Finite Element Method

Performance-based design for a constructional steel frame in nonlinear-plastic region requires an improvement in order to achieve a reliable structural analysis.The need to explicitly consider the nonlinear behaviour of structures makes the numerical modelling approach much more favourable than expensive and potentially dangerous experimental work.The parameters considered in the analysis are not limited to the linear change of geometry and material yielding,but also include the effect of large deformations,geometrical imperfections,load eccentricities,residual stresses,strain-unloading,and the nonlinear boundary conditions.Such analysis requires the use of accurate mathematical modelling and effective numerical procedures for solving equations of equilibrium.With that in mind,this paper presents the mathematical formulations and finite element procedures of nonlinear inelastic steel frame analysis with quasi-static semi-rigid connections.Verification and validation of the developed analytical procedures are conducted and good agreements are obtained.It is an approach that enables the structural behaviour of constructional steel frames to be traced throughout the entire range of loading until failure.It also provides information on the derivation of the structural analysis by using finite element method.

Cascaded ELM-Based Joint Frame Synchronization and Channel Estimation over Rician Fading Channel with Hardware Imperfections

Due to the interdependency of frame synchronization(FS)and channel estimation(CE),joint FS and CE(JFSCE)schemes are proposed to enhance their functionalities and therefore boost the overall performance of wireless communication systems.Although traditional JFSCE schemes alleviate the influence between FS and CE,they show deficiencies in dealing with hardware imperfection(HI)and deterministic line-of-sight(LOS)path.To tackle this challenge,we proposed a cascaded ELM-based JFSCE to alleviate the influence of HI in the scenario of the Rician fading channel.Specifically,the conventional JFSCE method is first employed to extract the initial features,and thus forms the non-Neural Network(NN)solutions for FS and CE,respectively.Then,the ELMbased networks,named FS-NET and CE-NET,are cascaded to capture the NN solutions of FS and CE.Simulation and analysis results show that,compared with the conventional JFSCE methods,the proposed cascaded ELM-based JFSCE significantly reduces the error probability of FS and the normalized mean square error(NMSE)of CE,even against the impacts of parameter variations.

Experimental Research and Finite Element Analysis on Setting Stiffening Rib of Corner Joints in Gabled Frames

In order to clear constructional design of corner joint, it is necessary to further investi-gate mechanical property of corner joint in gabled frames. Through static test and finite element software analysis of comparing the panel zone with and without inclined stiffener. Some conclusions are given in the article. The load displacement curves show that the capacity of oblique nodes installed within stiffening rib components is enhanced i.e. 40% more than those without stiffening rib nodes. The results reveal that in the gabled frames, the corner node with the inclined stiffening rib can improve the bearing capacity of the specimens. When the extraterritorial flange is tension, the erection of the inclined stiffening rib can prevent structural failure and improve effectually the ductility of the structure.

ON NECESSARY AND SUFFICIENT CONDITIONS FOR DUALS OF WAVELET FRAMES

This paper is concerned with the characterization of the duals of wavelet frames of L(2)(R). The sufficient and necessary conditions for them are obtained.

Defining the We-map Reference Frames and Providing Mathematical Expressions for Transformation Relations

We-map is an interactive mobile map that can be easily communicated and applied on personal electronic devices,such as personal computers and mobile phones.Therefore,the study of direction systems and coordinate systems is critical,and exploring reference frames is essential in direction and coordinate systems.Despite its significance,existing research on We-map lacks specific solutions for the exploration of reference frames is indispensable for the establishment of accurate direction and coordinate systems.In this paper,we endeavor to address this gap by elucidating the significance of We-map reference frames,defining them with mathematical constraints,summarizing their nature and characteristics,deriving their transformation relationships and representing them through mathematical formulars and equations.Our work contributes to the fundamental theory of We-map and provides valuable systems and support for the mathematical foundation of We-map,map production,and platform development.Ultimately,this research serves to advance the development of We-map.

Fusion-Riesz frame in Hilbert space

Fusion-Riesz frame (Riesz frame of subspace) whose all subsets are fusion frame sequences with the same bounds is a special fusion frame. It is also considered a generalization of Riesz frame since it shares some important properties of Riesz frame. In this paper, we show a part of these properties of fusion-Riesz frame and the new results about the stabilities of fusion-Riesz frames under operator perturbation (simple named operator perturbation of fusion-Riesz frames). Moreover, we also compare the operator perturbation of fusion-Riesz frame with that of fusion frame, fusion-Riesz basis (also called Riesz decomposition or Riesz fusion basis) and exact fusion frame.

Resilience-incorporated seismic risk assessment of precast concrete frames with“dry”connections

A resilience-incorporated risk assessment framework is proposed and demonstrated in this study to manifest the advantageous seismic resilience of precast concrete frame(PCF)structures with“dry”connections in terms of their low damage and rapid recovery.The framework integrates various uncertainties in the seismic hazard,fragility,capacity,demand,loss functions,and post-earthquake recovery.In this study,the PCF structures are distinguished from ordinary reinforced concrete frame(RCF)structures by characterizing multiple limit states for the PCF based on its unique damage mechanisms.Accordingly,probabilistic story-wise pushover analyses are performed to yield story-wise capacities for the predefined limit states.In the seismic resilience analysis,a step-wise recovery model is proposed to idealize the functionality recovery process,with separate considerations of the repair and non-repair events.The recovery model leverages the economic loss and downtime to delineate the stochastic post-earthquake recovery curves for the resilience loss estimation.As such,contingencies in the probabilistic post-earthquake repairs are incorporated and the empirical judgments on the recovery parameters are largely circumvented.The proposed framework is demonstrated through a comparative study between two“dry”connected PCFs and one RCF designed as alternative structural systems for a prototype building.The results from the risk quantification indicate that the PCFs show reduced loss hazards and lower expected losses relative to the RCF.Particularly,the PCF equipped with energy dissipation devices at the“dry”connections largely reduces the expected economic loss,downtime,and resilience loss by 29%,56%,and 60%,respectively,compared to the RCF.

Experimental and numerical study regarding H-steel all-bolted connection steel frame with composite wall boards

H-steel all-bolted connection steel frame structures with heat preservation and decoration composite wall boards were investigated and the seismic performances of three scaled specimens were studied.The failure modes,hysteresis curves,bearing capacity,ductility,energy dissipation capacity,stiffness degradation and strain distribution were discussed.The calculation method of structural theoretical internal force was presented.The results showed that the overall structural seismic performance was better,and the structural ductility met the demands of elastic-plastic inter-story drift angle for seismic design.The H-steel weak-axis connection structure obtained better energy dissipation capacity,and its bearing capacity and stiffness were slightly different from the strong-axis connection.The heat preservation and decoration performance of composite wallboard and the all-bolted connection of the steel frame realized prefabrication during the whole construction period.The plastic hinge of the steel beam can be moved outwards because of the L-angles,which effectively avoids stress concentration in joint areas and expands the plastic hinge range.The errors between the theoretical structural capacity calculated by the plastic analysis method and the test results were within 2.44%.In addition,structural failure mechanisms and bearing capacities were verified by the finite element(FE)analysis,and the effects of the main parameters on the structures were investigated.The FE verification results were the same as in the test.The research results provide theoretical support and technical guidance for the application of thermal insulation and decorative composite wall panels in H-shaped steel all-bolted steel frames.

Evaluation of the seismic behavior of reinforced concrete structures with flat slab-column gravity frame and shear walls through nonlinear analysis methods

This paper presents an investigation of the seismic behavior of reinforced concrete(RC)structures in which shear walls are the main lateral load-resisting elements and the participation of flat slab floor systems is not considered in the seismic design procedure.In this regard,the behavior of six prototype structures(with different heights and plan layouts)is investigated through nonlinear static and time history analyses,implemented in the OpenSees platform.The results of the analyses are presented in terms of the behavior of the slab-column connections and their mode of failure at different loading stages.Moreover,the global response of the buildings is discussed in terms of some parameters,such as lateral overstrength due to the gravity flat slab-column frames.According to the nonlinear static analyses,in structures in which the slab-column connections were designed only for gravity loads,the slab-column connections exhibited a punching mode of failure even in the early stages of loading.However,the punching failure was eliminated in structures in which a minimum transverse reinforcement recommended in ACI 318(2019)was provided in the slabs at joint regions.Furthermore,despite neglecting the contribution of gravity flat slab-column frames in the lateral load resistance of the structures,a relatively significant overstrength was imposed on the structures by the gravity frames.

Meta databases of steel frame buildings for surrogate modelling and machine learning-based feature importance analysis

Traditionally,nonlinear time history analysis(NLTHA)is used to assess the performance of structures under fu-ture hazards which is necessary to develop effective disaster risk management strategies.However,this method is computationally intensive and not suitable for analyzing a large number of structures on a city-wide scale.Surrogate models offer an efficient and reliable alternative and facilitate evaluating the performance of multiple structures under different hazard scenarios.However,creating a comprehensive database for surrogate mod-elling at the city level presents challenges.To overcome this,the present study proposes meta databases and a general framework for surrogate modelling of steel structures.The dataset includes 30,000 steel moment-resisting frame buildings,representing low-rise,mid-rise and high-rise buildings,with criteria for connections,beams,and columns.Pushover analysis is performed and structural parameters are extracted,and finally,incorporating two different machine learning algorithms,random forest and Shapley additive explanations,sensitivity and explain-ability analyses of the structural parameters are performed to identify the most significant factors in designing steel moment resisting frames.The framework and databases can be used as a validated source of surrogate modelling of steel frame structures in order for disaster risk management.

Structural optimization of a reusable seismic frame active link

Circular design encompasses the use of inventive construction methodologies that possess the capability to be readily dismantled,repurposed,or recycled upon reaching the conclusion of their functional lifespan.This work specifically examines the creation of a reusable design case-study idea for seismic frame design,which is commonly employed in steel-frame constructions in New Zealand.A reusable optimized design for the full seismic frame was proposed in the research.Optimizing the dimensions of welded structures,whether in terms of weight or cost,leads to a decrease in the weight of the steel utilized.The decrease in weight is directly associated with a decrease in environ-mental impact,as the environmental impact is directly proportional to the mass of the construction.The environmental consequences associated with welding technique are contingent upon the dimensions of the weld,hence exerting an indirect influence on the overall mass of the structure.Given the presence of mass dependence in all three areas,albeit in distinct manners,this work employed a multi-objective function optimization strategy to simultaneously address these areas while also partially evaluating them separately.On this way substantial reductions can be achieved both at structural mass and environmental effects.