The influence of free-end torsion on compressive behavior of an extruded AZ31 rod at various temperatures was studied.Pre-torsion generates a high density of dislocations and a large number of{1012}twins in the matrix...The influence of free-end torsion on compressive behavior of an extruded AZ31 rod at various temperatures was studied.Pre-torsion generates a high density of dislocations and a large number of{1012}twins in the matrix,which can largely enhance the compressive yield strength at RT and 100℃.However,with increasing temperature,hardening effect via pre-torsion gradually decreases.When the compressive temperature reaches 300℃,pre-torsion reduces the compressive yield strength.Moreover,initial dislocations and twins via torsion help to refine the sub-structure and accelerate the continuous dynamic recrystallization during compression at 200℃.Thus,twisted sample exhibits more rapid flow softening behavior than the as-extruded sample at 200℃.When compressed at 300℃,the twins and dislocations via torsion were largely eliminated during the holding time,and the discontinuous dynamic recrystallization was enhanced.It is found that the compression curves of twisted sample and as-extruded sample tended to be coincident at 300℃.Related mechanisms were discussed in detail.展开更多
The Swift effect of Mg alloy is sensitive to initial texture.However,dislocation slip is the main deformation mechanism during torsion of Mg alloy.The underlying relation of Swift effect and dislocation slip is still ...The Swift effect of Mg alloy is sensitive to initial texture.However,dislocation slip is the main deformation mechanism during torsion of Mg alloy.The underlying relation of Swift effect and dislocation slip is still not clarified.The effect of stress state and pre-straining on Swift effect was studied experimentally during free-end torsion for an extruded AZ31 alloy.The free-end torsion was performed with axial tension and compression stress which is lower than yield stress.It is found that the transition of axial deformation from contraction to elongation occurs when the axial stress changes from negative to positive.The pre-dislocations introduced by pre-tension promote axial shortening during torsion.While the pre-twins introduced by pre-compression are inhibition of axial shortening.The change of axial deformation is attributed to competition between twinning and prismatic slip.The axial shortening of extruded Mg alloy is generated by tensile twinning leading to c-axis strain.In contrast,the axial elongation can be generated by the activation of prismatic slip.The magnitude of axial strain generated by twinning is larger than that by prismatic slip.Moreover,the occurrence of detwinning results in axial elongation at low shear strain.展开更多
Based on the mechanical system of free-end fibers and the analysis of pulling free-end fibers out of the spun yarn during spinning,a low-fiber hollow spindle is designed and the air distribution of fluent field is sim...Based on the mechanical system of free-end fibers and the analysis of pulling free-end fibers out of the spun yarn during spinning,a low-fiber hollow spindle is designed and the air distribution of fluent field is simulated numerically. The negative pressure effect is much bigger at the top of low-fiber hollow spindle than that in Murata No.861,which is more conducive for single fiber to get into the channel of hollow spindle. The tangential velocity in 0-3 mm at the top of hollow spindle increases and the fluctuation of radial velocity is much stronger,which enhance the wrapping effect. In the addition,the distribution of axial velocity remains the same.展开更多
基金the National Natural Science Foundation of China(No.51601154)Southwest University Undergraduate Innovation Project(No.zsm2021026).
文摘The influence of free-end torsion on compressive behavior of an extruded AZ31 rod at various temperatures was studied.Pre-torsion generates a high density of dislocations and a large number of{1012}twins in the matrix,which can largely enhance the compressive yield strength at RT and 100℃.However,with increasing temperature,hardening effect via pre-torsion gradually decreases.When the compressive temperature reaches 300℃,pre-torsion reduces the compressive yield strength.Moreover,initial dislocations and twins via torsion help to refine the sub-structure and accelerate the continuous dynamic recrystallization during compression at 200℃.Thus,twisted sample exhibits more rapid flow softening behavior than the as-extruded sample at 200℃.When compressed at 300℃,the twins and dislocations via torsion were largely eliminated during the holding time,and the discontinuous dynamic recrystallization was enhanced.It is found that the compression curves of twisted sample and as-extruded sample tended to be coincident at 300℃.Related mechanisms were discussed in detail.
基金Financial support from the projects by the NSFC(51771166)the Hebei Natural Science Foundation(E2019203452,E2021203011)+4 种基金the central government guiding local science and technology development(216Z1001G)the talent project of human resources and social security department of Hebei province(A202002002)the key project of department of education of Hebei province(ZD2021107)Graduate Innovation Program of Hebei province(CXZZBS2020053)The work was supported by the State Key Laboratory of Materials Processing and Die&Mould Technology,Huazhong University of Science and Technology(P2020-013).
文摘The Swift effect of Mg alloy is sensitive to initial texture.However,dislocation slip is the main deformation mechanism during torsion of Mg alloy.The underlying relation of Swift effect and dislocation slip is still not clarified.The effect of stress state and pre-straining on Swift effect was studied experimentally during free-end torsion for an extruded AZ31 alloy.The free-end torsion was performed with axial tension and compression stress which is lower than yield stress.It is found that the transition of axial deformation from contraction to elongation occurs when the axial stress changes from negative to positive.The pre-dislocations introduced by pre-tension promote axial shortening during torsion.While the pre-twins introduced by pre-compression are inhibition of axial shortening.The change of axial deformation is attributed to competition between twinning and prismatic slip.The axial shortening of extruded Mg alloy is generated by tensile twinning leading to c-axis strain.In contrast,the axial elongation can be generated by the activation of prismatic slip.The magnitude of axial strain generated by twinning is larger than that by prismatic slip.Moreover,the occurrence of detwinning results in axial elongation at low shear strain.
基金Program for Changjiang Scholars and Innovative Research Team in University,China(No.IRT1220)Shanghai Natural Science Foundation,China(No.13ZR1400900)Keygrant Project of Chinese Ministry of Education(No.113027A)
文摘Based on the mechanical system of free-end fibers and the analysis of pulling free-end fibers out of the spun yarn during spinning,a low-fiber hollow spindle is designed and the air distribution of fluent field is simulated numerically. The negative pressure effect is much bigger at the top of low-fiber hollow spindle than that in Murata No.861,which is more conducive for single fiber to get into the channel of hollow spindle. The tangential velocity in 0-3 mm at the top of hollow spindle increases and the fluctuation of radial velocity is much stronger,which enhance the wrapping effect. In the addition,the distribution of axial velocity remains the same.
