Experimental data taken from free-field soil in 1-g shaking table tests are valuable for seismic studies on soil-structure interaction.But the available data from medium-to large-scale shaking table tests were not abu...Experimental data taken from free-field soil in 1-g shaking table tests are valuable for seismic studies on soil-structure interaction.But the available data from medium-to large-scale shaking table tests were not abundant enough to cover a large variety of types and conditions of the soil.In the study,1-g shaking table tests of a 3-m-height sand column were conducted to provide seismic experimental data about sand.The sand was directly collected in-situ,with the largest grain diameter being 2 cm and containing a water content of 6.3%.Properties of the sand were estimated under the influence of white noise plus pulse and earthquake motions,including the settlement,the dynamic properties of the sand column,and the three soil layers′shear modulus degradation relationships.The estimated properties were then indirectly verified by means of finite element analysis.Results show that the estimated parameters were effective and could be used in numerical modeling to reproduce approximate seismic responses of the sand column.展开更多
In recent years,explosion shock wave has been considered as a signature injury of the current military conflicts.Although strong shock wave is lethal to the human body,weak shock wave can cause many more lasting conse...In recent years,explosion shock wave has been considered as a signature injury of the current military conflicts.Although strong shock wave is lethal to the human body,weak shock wave can cause many more lasting consequences.To investigate the protection ability and characteristics of flexible materials and structures under weak shock wave loading,the blast wave produced by TNT explosive is loaded on the polyurethane foam with the density of 200.0 kg/m3(F-200)and 400.0 kg/m3(F-400),polyurea with the density of 1100.0 kg/m^(3)(P-1100)and structures composed of the two materials,which are intended for individual protection.Experimental results indicate that the shock wave is attenuated to weak pressure disturbance after interacting with the flexible materials which are not damaged.The shock wave protective capability of single-layer materials is dependent on their thickness,density and microscopic characteristics.The overpressure,maximum pressure rise rate and impulse of transmitted wave decrease exponentially with increase in sample thickness.For the same thickness,F-400 provides better protective capability than F-200 while P-1100 shows the best protective capability among the three materials.In this study,as the materials are not destroyed,F-200 with a thickness more than10.0 mm,F-400 with a thickness more than 4.0 mm,and P-1100 with a thickness more than 1.0 mm can attenuate the overpressure amplitude more than 90.0%.Further,multi-layer flexible composites are designed.Different layer layouts of designed structures and layer thickness of the single-layer materials can affect the protective performance.Within the research range,the structure in which polyurea is placed on the impact side shows the optimal shock wave protective performance,and the thicknesses of polyurea and polyurethane foam are 1.0 mm and 4.0 mm respectively.The overpressure attenuation rate reached maximum value of 93.3%and impulse attenuation capacity of this structure are better than those of single-layer polyurea and polyurethane foam with higher areal density.展开更多
为能够在合理计算规模下准确模拟空爆自由场冲击波特征的网格划分方案,获得可靠的计算结果,本文运用验证与确认(verification and validation,V&V)方法,通过开展网格敏感性分析,确认了炸药空爆计算模型的数值解、外推估值、网格收...为能够在合理计算规模下准确模拟空爆自由场冲击波特征的网格划分方案,获得可靠的计算结果,本文运用验证与确认(verification and validation,V&V)方法,通过开展网格敏感性分析,确认了炸药空爆计算模型的数值解、外推估值、网格收敛指标与比例距离的定量关系,给出了满足不同网格收敛指标要求的最大比例网格尺寸随比例距离位置的变化关系。据此,在比例距离Z为0~40 m·kg^(-1/3)范围内,给出了划分渐变网格的优化方案。针对1维、2维、3维计算模型,分别比较了细网格、粗网格、渐变网格方案的计算精度与计算耗时情况,讨论了本文提出网格划分方法的适用性。同时,采用本文建议的网格优化方案,给出了动爆冲击波毁伤飞机数值模拟场景的应用算例。结果表明,本文建议的网格优化方案可在几乎不降低计算精度的前提下显著提升计算效率,可为空爆自由场或者近似计算场景的数值模型网格划分提供参考。展开更多
This article deals with subjective measurements of attenuation characteristic of three earmuffs (A, B, C) and two earplugs (foam and molded). The measurement was carried out through the real-ear attenuation at thresho...This article deals with subjective measurements of attenuation characteristic of three earmuffs (A, B, C) and two earplugs (foam and molded). The measurement was carried out through the real-ear attenuation at threshold (REAT) under freefield condition. The five devices were examined singly, and four of them in combination. The performance of double hearing protection (earplug plus earmuff)were investigated experimentally using the same method for a number of combinations. All tests were conducted on 7 subjects, and two replications per subject. The obtained data of the earmuffs tested show that earmuff (A) posscsses the lowest attenuation and is characterized by highest standard deviation. On the other hand, the foam plug provides the higher attenuation and the lower standard deviation. When the foam plug was combined with either carmuff (B or C) an improvement of attenuation was similar, i. e. the choice of earmuff is not important. This combination yields higher attenuation than that produces for either device alone, but does not simply yield overall attenuation equal to the sum of the individual of each device. However, when situation was reversed, the combination of either earplug (foam or molded) with single earmuff yields variation in attenuation below 2 kHz. At and above 2 kHz, the combination results were comparcd to the bone conduction limits which was reported by different authors. At these frequencies, all tests of plug plus earmuff combinations that were studied provided attenuation approximately equal to the bone conduction limits of human skull. Finally, the attenuation estimates derived in this study werc less than comparable data published by the respective manufacturers.展开更多
基金Supported by:National Natural Science Foundation of China under Grant Nos.52008233 and U1839201the National Key Research and Development Program of China under Grant No.2018YFC1504305the Innovative Research Groups of the National Natural Science Foundation of China under Grant No.51421005。
文摘Experimental data taken from free-field soil in 1-g shaking table tests are valuable for seismic studies on soil-structure interaction.But the available data from medium-to large-scale shaking table tests were not abundant enough to cover a large variety of types and conditions of the soil.In the study,1-g shaking table tests of a 3-m-height sand column were conducted to provide seismic experimental data about sand.The sand was directly collected in-situ,with the largest grain diameter being 2 cm and containing a water content of 6.3%.Properties of the sand were estimated under the influence of white noise plus pulse and earthquake motions,including the settlement,the dynamic properties of the sand column,and the three soil layers′shear modulus degradation relationships.The estimated properties were then indirectly verified by means of finite element analysis.Results show that the estimated parameters were effective and could be used in numerical modeling to reproduce approximate seismic responses of the sand column.
基金supported by the National Natural Science Foundation of China(Grant Nos.12221002,12102233)。
文摘In recent years,explosion shock wave has been considered as a signature injury of the current military conflicts.Although strong shock wave is lethal to the human body,weak shock wave can cause many more lasting consequences.To investigate the protection ability and characteristics of flexible materials and structures under weak shock wave loading,the blast wave produced by TNT explosive is loaded on the polyurethane foam with the density of 200.0 kg/m3(F-200)and 400.0 kg/m3(F-400),polyurea with the density of 1100.0 kg/m^(3)(P-1100)and structures composed of the two materials,which are intended for individual protection.Experimental results indicate that the shock wave is attenuated to weak pressure disturbance after interacting with the flexible materials which are not damaged.The shock wave protective capability of single-layer materials is dependent on their thickness,density and microscopic characteristics.The overpressure,maximum pressure rise rate and impulse of transmitted wave decrease exponentially with increase in sample thickness.For the same thickness,F-400 provides better protective capability than F-200 while P-1100 shows the best protective capability among the three materials.In this study,as the materials are not destroyed,F-200 with a thickness more than10.0 mm,F-400 with a thickness more than 4.0 mm,and P-1100 with a thickness more than 1.0 mm can attenuate the overpressure amplitude more than 90.0%.Further,multi-layer flexible composites are designed.Different layer layouts of designed structures and layer thickness of the single-layer materials can affect the protective performance.Within the research range,the structure in which polyurea is placed on the impact side shows the optimal shock wave protective performance,and the thicknesses of polyurea and polyurethane foam are 1.0 mm and 4.0 mm respectively.The overpressure attenuation rate reached maximum value of 93.3%and impulse attenuation capacity of this structure are better than those of single-layer polyurea and polyurethane foam with higher areal density.
文摘为能够在合理计算规模下准确模拟空爆自由场冲击波特征的网格划分方案,获得可靠的计算结果,本文运用验证与确认(verification and validation,V&V)方法,通过开展网格敏感性分析,确认了炸药空爆计算模型的数值解、外推估值、网格收敛指标与比例距离的定量关系,给出了满足不同网格收敛指标要求的最大比例网格尺寸随比例距离位置的变化关系。据此,在比例距离Z为0~40 m·kg^(-1/3)范围内,给出了划分渐变网格的优化方案。针对1维、2维、3维计算模型,分别比较了细网格、粗网格、渐变网格方案的计算精度与计算耗时情况,讨论了本文提出网格划分方法的适用性。同时,采用本文建议的网格优化方案,给出了动爆冲击波毁伤飞机数值模拟场景的应用算例。结果表明,本文建议的网格优化方案可在几乎不降低计算精度的前提下显著提升计算效率,可为空爆自由场或者近似计算场景的数值模型网格划分提供参考。
文摘This article deals with subjective measurements of attenuation characteristic of three earmuffs (A, B, C) and two earplugs (foam and molded). The measurement was carried out through the real-ear attenuation at threshold (REAT) under freefield condition. The five devices were examined singly, and four of them in combination. The performance of double hearing protection (earplug plus earmuff)were investigated experimentally using the same method for a number of combinations. All tests were conducted on 7 subjects, and two replications per subject. The obtained data of the earmuffs tested show that earmuff (A) posscsses the lowest attenuation and is characterized by highest standard deviation. On the other hand, the foam plug provides the higher attenuation and the lower standard deviation. When the foam plug was combined with either carmuff (B or C) an improvement of attenuation was similar, i. e. the choice of earmuff is not important. This combination yields higher attenuation than that produces for either device alone, but does not simply yield overall attenuation equal to the sum of the individual of each device. However, when situation was reversed, the combination of either earplug (foam or molded) with single earmuff yields variation in attenuation below 2 kHz. At and above 2 kHz, the combination results were comparcd to the bone conduction limits which was reported by different authors. At these frequencies, all tests of plug plus earmuff combinations that were studied provided attenuation approximately equal to the bone conduction limits of human skull. Finally, the attenuation estimates derived in this study werc less than comparable data published by the respective manufacturers.
