Fluorine-Modulated MXene-Derived Catalysts for Multiphase Sulfur Conversion in Lithium-Sulfur Battery

Fluorine owing to its inherently high electronegativity exhibits charge delocalization and ion dissociation capabilities;as a result,there has been an influx of research studies focused on the utilization of fluorides to optimize solid electrolyte interfaces and provide dynamic protection of electrodes to regulate the reaction and function performance of batteries.Nonetheless,the shuttle effect and the sluggish redox reaction kinetics emphasize the potential bottlenecks of lithium-sulfur batteries.Whether fluorine modulation regulate the reaction process of Li-S chemistry?Here,the TiOF/Ti_(3)C_(2)MXene nanoribbons with a tailored F distribution were constructed via an NH4F fluorinated method.Relying on in situ characterizations and electrochemical analysis,the F activates the catalysis function of Ti metal atoms in the consecutive redox reaction.The positive charge of Ti metal sites is increased due to the formation of O-Ti-F bonds based on the Lewis acid-base mechanism,which contributes to the adsorption of polysulfides,provides more nucleation sites and promotes the cleavage of S-S bonds.This facilitates the deposition of Li_(2)S at lower overpotentials.Additionally,fluorine has the capacity to capture electrons originating from Li_(2)S dissolution due to charge compensation mechanisms.The fluorine modulation strategy holds the promise of guiding the construction of fluorine-based catalysts and facilitating the seamless integration of multiple consecutive heterogeneous catalytic processes.

Illuminating β-arrestin conformational dynamics by fluorine NMR

In a recent paper, solution-state ^(19)F NMR spectroscopy was used to probe the conformational dynamics of β-arrestin-1, an essential adaptor and signaling component of the G-protein couple receptor (GPCR) signaling pathway. This work reveals a highly complex conformational energy landscape of β-arrestin-1, and illuminates the molecular mechanism of the membrane phosphoinositide PIP2-induced β-arrestin-1 activation at residue level.(https://doi.org/10.1038/s41467-023-43694-1).

Unique double-layer solid electrolyte interphase formed with fluorinated ether-based electrolytes for high-voltage lithium metal batteries

Li metal batteries using high-voltage layered oxides cathodes are of particular interest due to their high energy density.However,they suffer from short lifespan and extreme safety concerns,which are attributed to the degradation of layered oxides and the decomposition of electrolyte at high voltage,as well as the high reactivity of metallic Li.The key is the development of stable electrolytes against both highvoltage cathodes and Li with the formation of robust interphase films on the surfaces.Herein,we report a highly fluorinated ether,1,1,1-trifluoro-2-[(2,2,2-trifluoroethoxy)methoxy]ethane(TTME),as a cosolvent,which not only functions as a diluent forming a localized high concentration electrolyte(LHCE),but also participates in the construction of the inner solvation structure.The TTME-based electrolyte is stable itself at high voltage and induces the formation of a unique double-layer solid electrolyte interphase(SEI)film,which is embodied as one layer rich in crystalline structural components for enhanced mechanical strength and another amorphous layer with a higher concentration of organic components for enhanced flexibility.The Li||Cu cells display a noticeably high Coulombic efficiency of 99.28%after 300 cycles and Li symmetric cells maintain stable cycling more than 3200 h at 0.5 mA/cm^(2) and 1.0m Ah/cm^(2).In addition,lithium metal cells using LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) and Li CoO_(2) cathodes(both loadings~3.0 m Ah/cm^(2))realize capacity retentions of>85%over 240 cycles with a charge cut-off voltage of 4.4 V and 90%for 170 cycles with a charge cut-off voltage of 4.5 V,respectively.This study offers a bifunctional ether-based electrolyte solvent beneficial for high-voltage Li metal batteries.

Fluoridation routes,function mechanism and application of fluorinated/fluorine-doped nanocarbon-based materials for various batteries:A review

With the popularity and widespread applications of electronics,higher demands are being placed on the performance of battery materials.Due to the large difference in electronegativity between fluorine and carbon atoms,doping fluorine atoms in nanocarbon-based materials is considered an effective way to improve the performance of used battery.However,there is still a blank in the systematic review of the mechanism and research progress of fluorine-doped nanostructured carbon materials in various batteries.In this review,the synthetic routes of fluorinated/fluorine-doped nanocarbon-based(CF_x)materials under different fluorine sources and the function mechanism of CF_x in various batteries are reviewed in detail.Subsequently,judging from the dependence between the structure and electrochemical performance of nanocarbon sources,the progress of CF_x based on different dimensions(0D–3D)for primary battery applications is reviewed and the balance between energy density and power density is critically discussed.In addition,the roles of CF_x materials in secondary batteries and their current applications in recent years are summarized in detail to illustrate the effect of introducing F atoms.Finally,we envisage the prospect of CF_x materials and offer some insights and recommendations to facilitate the further exploration of CF_x materials for various high-performance battery applications.

Study on Distribution Characteristics and Occurrence Form of Soil Fluorine in Sorghum Base of Renhuai City

In order to find out the effects of soil fluorine on ecological environment and crop safety in the sorghum cultivation base of Renhuai City, Guizhou Province, the content and the occurrence forms of soil fluorine and its influencing factors of Maoba Town were investigated and studied. The results showed that the total fluorine content in the soil of the sorghum base ranged from 668.60 to 2 596.80 mg/kg, with an average of 1 483.25 mg/kg, which was 3.10 and 1.85 times of the national soil background value and the average value of the soil in endemic areas, respectively. The spatial distribution of fluorine in the soil of the study area was uneven, and the fluorine content was in the order of Anliang Village>Yangliu Village>Houba Village>Xiongfeng Village. The soil fluorine contents of various forms varied greatly, and the distribution law was as follows: residual state>water soluble state>organically bound state>exchangeable state>Fe/Mn-F state. The residual fluorine content was the highest, accounting for more than 99% of total fluorine content, while the sum of other four forms was less than 1%, with their respective proportions ranging from 0.10% to 0.30%. The content and proportion of available fluorine in water-soluble and exchangeable states were relatively low, which had limited influence on the surrounding water environment and crop safety. The physicochemical properties of soil, such as pH, organic matter, cation exchange capacity and clay particles had a certain influence on the occurrence forms of soil fluorine, thus changing the availability and migration of soil fluorine, which might endanger the ecological environment safety, food safety and human health.

Constructing Bidirectional Fluorine-Rich Electrode/Electrolyte Interphase Via Solvent Redistribution toward Long-Term Sodium Battery

The high concentration electrolytes with specific solvation structure could passivate the electrodes to prolong battery cycle life but at the expense of increased cost,which limits the wide application in commercialization.The regular concentration(1_(M))electrolytes with suitable properties(viscosity,ionic conductivity,etc.)are cost-guaranteed,but undesired reactions would always occur and lead to battery degradation during long cycles.To promote the long-term cycle stability in a cost-effective way,this work constructs bidirectional fluorine-rich electrode/electrolyte interphase(EEI)by redistribution of solvents and electrochemical induction.The fluorinated effect with reasonable zoning planning restricts morphological disintegration,meanwhile,forms spatial confinement on cathode.In particular,the obtained cathode electrolyte interphase(CEI)gets the ample ability of Na^(+)transport,which benefits from the fluorinated organics arranged in the epitaxy and the hemi-carbonate content acting on the thickness.Thus,the electrochemical long cycling performance of F-NVPOFⅡF-CC full cells is significantly enhanced(the decay rate at 1 C per cycle is as low as 0.01%).Such a fluorine-rich EEI engineering is expected to take transitional layers against the degradation of cells and make ultra-long cycle batteries possible.

Lithium-ion and solvent co-intercalation enhancing the energy density of fluorinated graphene cathode

Fluorinated carbons CF_xhold the highest theoretical energy density(e.g.,2180 W h kg^(-1)when x=1)among all cathode materials of lithium primary batteries.However,the low conductivity and severe polarization limit it to achieve its theory.In this study,we design a new electrolyte,namely 1 M LiBF_(4)DMSO:DOL(1:9 vol.),achieving a high energy density in Li/CF_xprimary cells.The DMSO with a small molecular size and high donor number successfully solvates Li^(+)into a defined Li^(+)-solvation structure.Such solvated Li^(+)can intercalate into the large-spacing carbon layers and achieve an improved capacity.Consequently,when discharged to 1.0 V,the CF_(1.12)cathode demonstrates a specific capacity of 1944 m A h g^(-1)with a specific energy density of 3793 W h kg^(-1).This strategy demonstrates that designing the electrolyte is powerful in improving the electrochemical performance of CF_(x) cathode.

All-fluorinated electrolyte for non-flammable batteries with ultra-high specific capacity at 4.7 V

Li metal batteries(LMBs)with LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)(NMC811)cathodes could release a specific energy of>500 Wh kg^(-1) by increasing the charge voltage.However,high-nickel cathodes working at high voltages accelerate degradations in bulk and at interfaces,thus significantly degrading the cycling lifespan and decreasing the specific capacity.Here,we rationally design an all-fluorinated electrolyte with addictive tri(2,2,2-trifluoroethyl)borate(TFEB),based on 3,3,3-fluoroethylmethylcarbonate(FEMC)and fluoroethylene carbonate(FEC),which enables stable cycling of high nickel cathode(LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2),NMC811)under a cut-off voltage of 4.7 V in Li metal batteries.The electrolyte not only shows the fire-extinguishing properties,but also inhibits the transition metal dissolution,the gas production,side reactions on the cathode side.Therefore,the NMC811||Li cell demonstrates excellent performance by using limited Li and high-loading cathode,delivering a specific capacity>220 mA h g^(-1),an average Coulombic efficiency>99.6%and capacity retention>99.7%over 100 cycles.

Visible light induced photodegradation of organic pollutants on nitrogen and fluorine co-doped TiO_2 photocatalyst

The nitrogen and fluorine co doped TiO 2 polycrystalline powder was synthesized by calcinations of the hydrolysis product of tetra butyl titanate with ammonium fluoride. Nitrogen and fluorine co doping causes the absorption edge of TiO 2 to shift to a lower energy region. The photocatalytic activity of co doped TiO 2 with anatase phases was found to be 2 4 times higher than that of the commercial TiO 2 photocatalyst Degussa P25 for phenol decomposition under visible light irradiation. The co doped TiO 2 powders only contain anatase phases even at 1000℃. Apparently, ammonium fluoride added retarded phase transformation of the TiO 2 powders from anatase to rutile. The substitutional fluorine and interstitial nitrogen atoms in co doped TiO 2 polycrystalline powder were responsible for the vis light response and caused the absorption edge of TiO 2 to shift to a lower energy region.

Synthesis of a Novel Core-shell Type Acrylic-polyurethane Hybrid Emulsion Containing Siloxane and Fluorine as well as Water and the Oil Resistances of Cured Film

Siliconated polyurethane （Si-PU） was synthesized using isophorone diisocyanate （IPDI）, hydroxybutyl-terminated polydimethylsiloxane （PDMS）, polytetramethylene ether glycol （PTMG）, polypropylene glycol （PPG）, 1,6-hexanediol （HDO）, dimethylol propionic acid （DMPA） and triethylamine （TEA）. Based on butyl acrylate （BA）, 2, 2, 2-trifluoroethylmethacrylate （TFEMA） and Si-PU as a seed emulsion, a novel core-shell type acrylic-polyurethane hybrid emulsion, containing siloxane and fluorine （F-Si-PU）, was prepared by seeded emulsion polymerization. The contents of siloxane and fluorine were determined according to the feed ratio. Fourier transform infrared spectroscopy （FTIR） was used to identify the chain structures of Si-PU and F-Si-PU. Investigation of transmission electron microscopy （TEM） confirmed the core-shell structure of F-Si-PU emulsion. Measurement results of water contact angle and the swelling ratio in water and n-octane for cured film showed that the water and the oil resistances for F-Si-PU had been significantly improved at a suitable content of fluorine and siloxane.

Study on chemical forms of fluorine enrichment of Antarctic krill

The different forms fluoine in different parts of molting process of krill was analyzed by culture of Antarctic krill (Euphausia superba). The results shaw that fluorine amount in cuticle is up to 90% of total in the krill. During the krill molting process, the fluorine content in cuticle and muscle varies alternatively. This is to say, the fluorine content in new cuticle and muscle is much lower after molted, the fluorine in krill comes from seawater by biological absorption of the krill, and the fluorine absorbed by krill lost with the old cuticle at the end stage of molting process. Meanwhile, the new molting process starts again. The evidence is proved by the change of different forms fluorine content in cuticle and muscle during krill's molting process. At last the author proposes the fluorine enriching process model of Antarctic krill.

Synthesis and Crystal Structure of 9-[3-Oxo-1-(4-bromopheny)-3-phenypropyl] fluorine

A novel compound of 9-[3-oxo-1-（4-bromopheny）-3-phenypropyl]fluorine （3） was synthesized via nucleophilic addition reaction under solvent-free condition. Its structure was determined by IR, 1H NMR, MS, elemental analysis and X-ray diffraction. The crystal of the new compound is of triclinic system, space group P-1 with a=9.7919（16）, b=11.0932（18）, c=11.2534（19） , α=76.927（3）, β=67.452（3）, γ=84.895（3）°, V=1099.7（3） 3, Z=2, Dc=1.369 g/cm3, μ=1.886 mm-1, F（000）=464, R=0.0586 and wR=0.1562 for 3145 observed reflections with Ⅰ 2σ（Ⅰ）. π-π Stacking interactions contribute to the stability of the structure.

Simultaneous determination of fluorine and iodine in urine by ion chromatography with electrochemical pretreatment

A new method for the simultaneous determination of fluorine and iodine in urine by ion chromatography （IC） with electrochemical pretreatment has been developed. The pretreatment was performed in a novel electrochemical oxidationneutralization device （EOND）, in which iodide of the sample was oxidized to iodate and the alkaline digestion sample solution was neutralized. Under the optimized conditions, the limits of detection （LOD, S/N = 3） were 2.5 μg/L for fluoride and 20 μg/L for iodate, respectively. The recoveries were in the range of 93-102% for fluoride and 86-98% for iodate.

Really active form of fluorine toxicity affecting Acidithiobacillus ferrooxidans activity in bioleaching uranium

In order to determine the mechanism of bacterial tolerance to fluorine,Acidithiobacillus ferrooxidans ATCC 23270 was domesticated and studied under the conditions of different fluorine concentrations and pH values with or without treatment by Proteinase K.The bacterial activities were observed through measuring the changes of solution potentials by platinum electrode with Ag/AgCl reference electrode and the intracellular fluorine was determined by-uorine ion-selective electrode.The results indicated that the tolerance of Acidithiobacillus ferrooxidans ATCC 23270 to fluorine could be obviously improved by domestication,HF was the effective form of fluorine to affect the bacterial activity,and pH increase or concentration change of ions of strong complex ability with fluorine ions in solution could result in false appearance of high fluorine-resistant strain.Some proteins located in cell wall or cell membrane were intimately relative with the bacterial fluorine tolerance.

Effect of CaO on Fluorine in the Decomposition of REFCO_3

Influence of CaO on thermal decomposition of REFCO3 was studied. The results showed that CaO did not affect significantly the decomposition ratio of REFCO3. The XRD experiment showed that there was a great deal of CaF2 in the masting production, the gas chromatographic analysis on the gas of REFCO3 decomposed, and the 70% content of fluorine in the gas of REFCO3 added 15% CaO was reduced. CaO could absorb the fluorine from the decomposition of REFCO3, and the environmental pollution of the fluorine was greatly alleviated,

Synthesis and characterization of fluorinated polyurethane with fluorine-containing pendent groups

A novel fluorinated polyurethane （FPU） with fluorine-containing pendent groups was prepared by using fluorinated polyether glycol （PTMG-g-HFP） as a soft segment, 1,6-hexamethylene diisocyanate （HDI） or toluene diisocyanate （TD1） as a hard segment and 1,4-butanodiol （BDO） as a chain extender. FTIR, ^1H NMR, ^13C NMR and GPC were used to characterize the structure of the fluorinated polyurethane. Thermal stabilities of the fluorinated polyurethane and the corresponding hydrogenated polyurethane were studied by TGA. XPS analysis at two different sampling depths for the fluorinated polyurethane was used to investigate the surface compositions of FPU. The results showed the fluorine enrichment on the surface of FPU.

EXTRACTION MECHANISM OF CERIUM(Ⅳ) AND FLUORINE(I)IN THE SEPARATION PROCESS OF BASTNASITE LEACH SOLUTION BY CUNEX 923

The extraction equilibrium of cerium(IV) and fluorine (I) from H2SO4 solution by Cyanex 923 is studied. The extraction mechanism of Ce(IV) and F(I) by Cyanex 923 is determined by the method of slope analysis. The results show that Cyanex 923 can extract HF as HF&middotL and Ce4+ together with HF as Ce(HF)(HSO4)2(SO4)&middot2L by which HF comes into the organic phase mainly when there is Ce4+ in the solution, where L is the extractant. Temperature does not affect the extraction. The IR spectra of purified Cyanex 923 saturated with Ce(IV) and HF are discussed.

Synthesis, X-ray Crystallographic Analysis and Bioactivities of α-Aminophosphonates Featuring Pyrazole and Fluorine Moieties

A series of novel -aminophosphonates containing pyrazole and fluorine moieties was designed and synthesized through ultrasonic-assisted condensation and solvent-free addition reactions. Their structures were verified by IR, ^1H NMR, ^13C NMR and elemental analysis. The crystal structure of diethyl[（4-cyano-1H-pyrazol-3-ylamino）（3,5-difluorophenyl）methyl]phosphonate（4a, C15H17F2N4O3P） was determined by single-crystal X-ray diffraction. Compound 4a crystallizes in the triclinic system, space group P1 with a = 8.381（3）, b = 10.103（5）, c = 11.268（3） A, α= 83.772（19）, β= 74.726（19）, γ= 70.964（18）, V = 869.9（6） 3, Mr = 370.30, Dc = 1.414 g/cm^3, Z = 2, F（000） = 384, = 0.200 mm^-1, MoKa radiation（ = 0.71073 ）, the final R = 0.0487 and w R = 0.0823 for 1582 observed reflections with I 〉 2（I）. X-ray diffraction analysis reveals that there are two planes in 4a, and the dihedral angle is 71.51°. Two intermolecular hydrogen bonds and a face-to-face … stacking interaction are observed in the crystal structure. The compounds were evaluated for their antifungal, antiviral and antitumor activities, respectively. Among them, 4b, 4c, 4g and 4h exhibit good activities on Sclerotium rolfsii Sacc at 200 μg/m L, while 4b, 4c, 4f and 4g possess good anti-TMV activities at 500 μg/m L. Unfortunately, all of the compounds showed weak antitumor activities.

Synthesis of New Fluorine/Phosphorus Substituted 6-(2’-Amino Phenyl)-3-Thioxo-1,2,4-Triazin-5(2H, 4H)One and Their Related Alkylated Systems as Molluscicidal Agent as against the Snails Responsible for Bilharziasis Diseases

New fluorine substituted 6-(5’-fluoro-2’-triphenylphosphiniminophenyl) 3-thioxo-1,2,4-triazin-5 (2H, 4H) one (2) was obtained via Wittig’s reaction of the corresponding 6-(5’-fluoro-2’-amino-phenyl)-3-thioxo-1,2,4-triazinone (1). Behavior of compound 2 towards alkylating agents and/or oxidizing agents was studied were, N-hydroxyl (3), Mannich base (4,5), S-alkyl (6,7,8) and thiazolo [3,2-b][1,2,4] triazinones (10-14) and or 3-disulfide (18), 3-sulfonic acid 19 and 1,2,4-triazin-3,5-Dionne (20) derivatives obtained. Structures of the new products are established by elemental and spectral data. The new targets obtained screened as Molluscicidalagents against Biomophlaria Alexandrina snails responsible for Bilharziasis diseases, in compare with Baylucide as standard drug.

Study on Escaping Fluorine Inhibition in Calcining Process of Mixed Rare Earth Concentrate

GC technology was used to study escaping fluorine in calcined process of mixed rare earth concentrate. The mixed rare earth concentrate and it adding assistant of CaO-NaCl-CaCl2 were calcined at 400～750 ℃ for 30～120 min, and then total amount of fluorine, exhausting ratio of fluorine, decomposition ratio and the component were determined. The results showed that adding CaO-NaCl-CaCl2 the decomposition ratio was up to 90% at 700 ℃ in 1 h, and the escaping ratio of fluorine decreased from 29.52% to 0.948%. The average inhabitation ratio was 98.39%. This method supplied basis for low energy and clean decomposition of mixed rare earth concentrate.