无线Mesh网络(Wireless Mesh network, WMN)中,链路拥塞会导致较长的传输时延和排队时间,因此将链路负载均衡与服务质量结合起来一直是研究热点.本文针对多目标路由优化管理的关键问题,将路由问题表述为整数线性规划(Integer linear pro...无线Mesh网络(Wireless Mesh network, WMN)中,链路拥塞会导致较长的传输时延和排队时间,因此将链路负载均衡与服务质量结合起来一直是研究热点.本文针对多目标路由优化管理的关键问题,将路由问题表述为整数线性规划(Integer linear programming, ILP)模型,并将无线Mesh网络与软件定义网络(Software defined network, SDN)结合,设计了适应于SD-WMN架构的多目标函数、约束条件以及整体的网络优化模型,此外,由于该整数线性规划模型是NP完全的,本文将改进的人工蜂群的启发式优化算法引入到路由优化算法中,以获得源节点和目的节点之间传输流量的理想路径.本文所提出方法在Mininet网络模拟工具中的仿真结果证明了该算法的有效性,与OSPF、SDNR以及遗传蚁群优化(G-ACO)相比,所提出方法在丢包率、往返时间和负载均衡方面均有不错的改善.展开更多
A novel VOF-type volume-tracking method for two-dimensional free-surface flows based on the unstructured triangular mesh is presented. Owing to the inherent merit of the unstructured triangular mesh in fitting curved ...A novel VOF-type volume-tracking method for two-dimensional free-surface flows based on the unstructured triangular mesh is presented. Owing to the inherent merit of the unstructured triangular mesh in fitting curved boundaries, this method can handle the free-surface problems with complex geometries accurately and directly, without introducing any complicated boundary treatment or artificial diffusion. The method solves the volume transport equation geometrically through the Modified Lagrangian-Eulerian Re-map （MLER） method, which is applied to advective fluid volumes. Moreover, the PLIC method is adopted to give a second-order reconstructed interface approximation. To validate this method, two advection tests were performed for the establishment of the accuracy and convergence rate of the solutions. Numerical results for these complex tests provide convincing evidence for the excellent solution quality and fidelity of the method.展开更多
Despite the growing demand for transparent conductive films in smart and wearable electronics for electromagnetic interference(EMI)shielding,achieving a flexible EMI shielding film,while maintaining a high transmittan...Despite the growing demand for transparent conductive films in smart and wearable electronics for electromagnetic interference(EMI)shielding,achieving a flexible EMI shielding film,while maintaining a high transmittance remains a significant challenge.Herein,a flexible,transparent,and conductive copper(Cu)metal mesh film for EMI shielding is fabricated by self-forming crackle template method and electroplating technique.The Cu mesh film shows an ultra-low sheet resistance(0.18Ω□^(-1)),high transmittance(85.8%@550 nm),and ultra-high figure of merit(>13,000).It also has satisfactory stretchability and mechanical stability,with a resistance increases of only 1.3%after 1,000 bending cycles.As a stretchable heater(ε>30%),the saturation temperature of the film can reach over 110°C within 60 s at 1.00 V applied voltage.Moreover,the metal mesh film exhibits outstanding average EMI shielding effectiveness of 40.4 dB in the X-band at the thickness of 2.5μm.As a demonstration,it is used as a transparent window for shielding the wireless communication electromagnetic waves.Therefore,the flexible and transparent conductive Cu mesh film proposed in this work provides a promising candidate for the next-generation EMI shielding applications.展开更多
In order to improve the overall resilience of the urban infrastructures, it is required to conduct blast resistant design for important building structures in the city. For complex terrain in the city, it is recommend...In order to improve the overall resilience of the urban infrastructures, it is required to conduct blast resistant design for important building structures in the city. For complex terrain in the city, it is recommended to determine the blast load on the structures via numerical simulation. Since the mesh size of the numerical model highly depends on the explosion scenario, there is no generally applicable approach for the mesh size selection. An efficient method to determine the mesh size of the numerical model of near-ground detonation based on explosion scenarios is proposed in this study. The effect of mesh size on the propagation of blast wave under different explosive weights was studied, and the correlations between the mesh size effect and the charge weight or the scaled distance was described. Based on the principle of the finite element method and Hopkinson-Cranz scaling law, a mesh size measurement unit related to the explosive weight was proposed as the criterion for determining the mesh size in the numerical simulation. Finally, the applicability of the method proposed in this paper was verified by comparing the results from numerical simulation and the explosion tests and was verified in AUTODYN.展开更多
文摘无线Mesh网络(Wireless Mesh network, WMN)中,链路拥塞会导致较长的传输时延和排队时间,因此将链路负载均衡与服务质量结合起来一直是研究热点.本文针对多目标路由优化管理的关键问题,将路由问题表述为整数线性规划(Integer linear programming, ILP)模型,并将无线Mesh网络与软件定义网络(Software defined network, SDN)结合,设计了适应于SD-WMN架构的多目标函数、约束条件以及整体的网络优化模型,此外,由于该整数线性规划模型是NP完全的,本文将改进的人工蜂群的启发式优化算法引入到路由优化算法中,以获得源节点和目的节点之间传输流量的理想路径.本文所提出方法在Mininet网络模拟工具中的仿真结果证明了该算法的有效性,与OSPF、SDNR以及遗传蚁群优化(G-ACO)相比,所提出方法在丢包率、往返时间和负载均衡方面均有不错的改善.
文摘A novel VOF-type volume-tracking method for two-dimensional free-surface flows based on the unstructured triangular mesh is presented. Owing to the inherent merit of the unstructured triangular mesh in fitting curved boundaries, this method can handle the free-surface problems with complex geometries accurately and directly, without introducing any complicated boundary treatment or artificial diffusion. The method solves the volume transport equation geometrically through the Modified Lagrangian-Eulerian Re-map （MLER） method, which is applied to advective fluid volumes. Moreover, the PLIC method is adopted to give a second-order reconstructed interface approximation. To validate this method, two advection tests were performed for the establishment of the accuracy and convergence rate of the solutions. Numerical results for these complex tests provide convincing evidence for the excellent solution quality and fidelity of the method.
基金This work was financially supported by the National Natural Science Foundation of China(Grant No.523712475,2072415 and 62101352)Shenzhen Science and Technology Program(RCBS20210706092343016).
文摘Despite the growing demand for transparent conductive films in smart and wearable electronics for electromagnetic interference(EMI)shielding,achieving a flexible EMI shielding film,while maintaining a high transmittance remains a significant challenge.Herein,a flexible,transparent,and conductive copper(Cu)metal mesh film for EMI shielding is fabricated by self-forming crackle template method and electroplating technique.The Cu mesh film shows an ultra-low sheet resistance(0.18Ω□^(-1)),high transmittance(85.8%@550 nm),and ultra-high figure of merit(>13,000).It also has satisfactory stretchability and mechanical stability,with a resistance increases of only 1.3%after 1,000 bending cycles.As a stretchable heater(ε>30%),the saturation temperature of the film can reach over 110°C within 60 s at 1.00 V applied voltage.Moreover,the metal mesh film exhibits outstanding average EMI shielding effectiveness of 40.4 dB in the X-band at the thickness of 2.5μm.As a demonstration,it is used as a transparent window for shielding the wireless communication electromagnetic waves.Therefore,the flexible and transparent conductive Cu mesh film proposed in this work provides a promising candidate for the next-generation EMI shielding applications.
基金the funding supports of the National Key Research and Development Plan,China(Grant No.2022YFC3801800)National Natural Science Foundation of China(Grant Nos.52038010 and 52078368)。
文摘In order to improve the overall resilience of the urban infrastructures, it is required to conduct blast resistant design for important building structures in the city. For complex terrain in the city, it is recommended to determine the blast load on the structures via numerical simulation. Since the mesh size of the numerical model highly depends on the explosion scenario, there is no generally applicable approach for the mesh size selection. An efficient method to determine the mesh size of the numerical model of near-ground detonation based on explosion scenarios is proposed in this study. The effect of mesh size on the propagation of blast wave under different explosive weights was studied, and the correlations between the mesh size effect and the charge weight or the scaled distance was described. Based on the principle of the finite element method and Hopkinson-Cranz scaling law, a mesh size measurement unit related to the explosive weight was proposed as the criterion for determining the mesh size in the numerical simulation. Finally, the applicability of the method proposed in this paper was verified by comparing the results from numerical simulation and the explosion tests and was verified in AUTODYN.
