Optical coherence transfer over 50-km spooled fiber with frequency instability of 2×10^(-17) at 1s

We demonstrate coherent transfer of an ultra-stable optical frequency at 192.8 THz over 50-km spooled fiber. Random phase noise induced by environmental disturbance through fiber is detected and suppressed by feeding a correctional signal into an acousto-optic modulator. After being compensated, the fiber-induced frequency instability is 2×10-17 at 1-s averaging time and reaches 8×10-20 after 16 h. The noise floor of the compensation system could be as low as 2×10-18 at 1-s averaging time.

Coherent Transfer of Optical Frequency over 112 km with Instability at the 10^(-20) Level

We demonstrate optical-carrier transfer over a 112-km single-span urban fiber link, By actively compensating the phase noise induced along the fiber link, a noise suppression of 55 dB at 1 Hz is obtained. A fractional frequency instability of 2.5× 10^-16 at i s is achieved, and reaching 7.5× 10^-20 at 10000 s. The system is stable and able to run for a long time. This work will contribute to optical frequency distribution and remote comparison among atomic clocks.

A long-term frequency-stabilized erbium-fiber-laser-based optical frequency comb with an intra-cavity electro-optic modulator

We demonstrate an optical frequency comb based on an erbium-doped-fiber femtosecond laser with the nonlinear polarization evolution scheme. The repetition rate of the laser is about 209 MHz. By controlling an intra-cavity electro- optic modulator and a piezo-transducer, the repetition rate can be stabilized with a high-bandwidth servo in a frequency range of 3 kHz, enabling long-term repetition rate phase-locking. The in-loop frequency stability of repetition rate is about 1.6× 10-13 in an integration time of 1 s, limited by the measurement system; and it is inversely proportional to integration time in the short term. Furthermore, using a common path f-2f interferometer, the carrier envelope offset frequency of the comb is obtained with a signal-to-noise ratio of 40 dB in a 3-MHz resolution bandwidth. Stabilized cartier envelope offset frequency exhibits a deviation of 0.6 mHz in an integration time of 1 s.

All polarization-maintaining Er:fiber-based optical frequency comb for frequency comparison of optical clocks

We demonstrate an optical frequency comb(OFC)based on a turnkey mode-locked laser with a figure-9-shape structure and polarization-maintaining fibers,for the comparison of frequency among optical clocks with wavelengths of 698 nm,729 nm,1068 nm,and 1156 nm.We adopt a multi-branch approach in order to produce high power OFC signals at these specific wavelengths,enabling the signal-to-noise ratio of the beatnotes between the OFC and the clock lasers to exceed30 d B at a resolution bandwidth of 300 k Hz.This approach makes the supercontinuum spectra much easier to be generated than a single branch OFC.However,more out-of-loop fibers degrade the long-term frequency instability due to thermal drift.To minimize the thermal drift effect,we set the fiber lengths of different branches to be similar,and we stabilize the temperature as well.The out-of-loop frequency instability of the OFC due to the incoherence of the multi-branch is about5.5×10^(19) for 4000 s,while the in-loop frequency instability of fceo and that of fbeat are 7.5×10^(18) for 1 s and 8.5×10^(18) for 1 s,respectively.The turnkey OFC meets the requirement for the comparison of frequency between the best optical clocks.

The instability of dust acoustic waves in inhomogeneous dusty plasmas with non-adiabatic dust charge fluctuation

This paper investigates the propagation of linear dust acoustic waves in inhomogeneous dusty plasmas due to spatial gradients of dust charge, plasma densities. A linear dispersion relation is obtained with the non-adiabatic dust charge iguctuation and the non-thermally distributed ions. The numerical results show that the inhomogeneity, nonthermal ions and non-adlabatic dust charge iguctuatlon have strong iniguence on the frequency and the damping rate of waves.

Coupled bending-torsion vibration of a homogeneous beam with a single delamination subjected to axial loads and static end moments

Delaminations in structures may significantly reduce the stiffness and strength of the structures and may affect their vibration characteristics. As structural components, beams have been used for various purposes, in many of which beams are often subjected to axial loads and static end moments. In the present study, an analytical solution is developed to study the coupled bending-torsion vibration of a homogeneous beam with a single delamination subjected to axial loads and static end moments. Euler-Bernoulli beam theory and the ＂free mode＂ assumption in delamination vibration are adopted. This is the first study of the influences of static end moments upon the effects of delaminations on natural frequencies, critical buckling loads and critical moments for lateral instability. The results show that the effects of delamination on reducing natural frequencies, critical buckling load and critical moment for lateral instability are aggravated by the presence of static end moment. In turn, the effects of static end moments on vibration and instability characteristics are affected by the presence of delamination. The analytical results of this study can serve as a benchmark for finite element method and other numerical solutions.

Dynamic Stability Improvement of Decentralized Wind Farms by Effective Distribution Static Compensator

Dynamic instability of decentralized wind energy farms is a major issue to deliver continuous green energy to electricity consumers.This instability is caused by variations of voltage and frequency parameters due to intermittencies in wind power.Previously,droop control and inverter-based schemes have been proposed to regulate the voltage by balancing reactive power,while inertial control,digital mapping tech-nique of proportional-integral-differential(PID)controller and efficiency control strategy have been developed to regulate the frequency.In this paper,voltage stability is improved by a new joint strategy of distribution static compensator(DSTATCOM)six-pulse controller based reactive power management among decentralized wind turbines and controlled charging of capacitor bank.The frequency stability is ensured by a joint coordinated utilization of capacitor bank and distributed wind power turbines dispatching through a new DSTATCOM six-pulse controller scheme.In both strategies,power grid is contributed as a backup source with less priority.These new joint strategies for voltage and frequency stabilities will enhance the stable active power delivery to end users.A system test case is developed to verify the proposed joint strategies.The test results of the proposed new schemes are proved to be effective in terms of stability improvement of voltage,frequency and active power generation.